I need a SDR2 file converter for some CCTV images URGENTLY

I need to check some CCTV footage urgently - for the police. They are in SDR2 format - anyone know any good software that will (easily) convert it for me. Prefer cheap/free (naturally).
Thanks

If the police are involved, let them handle it as they are trained in preserving evidence and have their own video department.
If you touch that video, the culprit can get off as you tampered with evidence and your not qualified to do so.

Similar Messages

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP?

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?

What drivers?

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

Raw file converter for Canon EOS 5D Mark iii ?

When will Aperture 3 have a raw file converter for Canon's new 5D model? Should I work with JPEGs in the mean while or is there another better solution?
Best regards, Markus

Markus,
see this long thread
Canon 5D Mk III - RAW update?
I would shoot in raw+jpeg while you are waiting and use the Adobe dng converter,
see Adobe's Camera Raw Converter
Then, when the raw is supported by Aperture, reprocess your masters.
Regards
Léonie

What is the best file converter for Panasonic HC-X900M camcorder for use on Final Cut Pro X?

What is the best file converter for Panasonic HC-X900M Camcorder Mts files for use with Final Cut Pro?

This camcorder records in several ways, including AVCHD2, mpeg4 iframe, and 3d, at least that seems to be the case from a quick reading of its specs.
If you get the latest update for fcpx, it will handle video shot in 60P. That is 10.0.4
Here is what Apple says it supports, and one version of the 900 seems to be supported.
I think the Apple site is a little behind its own software update, as one advantage of the new update is that it handles 60P.
Maybe I am missing something, but I wonder what would happen if you get the latest update for fcpx, and try your card again. I did find that fcpx now supports my sony dslr at 60P.
Here is a thread with one person saying they can now use their 900.
Hugh

TS3694 I've ios 5.1.1 on my ios and i want to update to 6.1.2 not 6.1.3 ive downloaded the 6.1.2 file but for some reason i keep getting (3194) error.. what do I do?

I've ios 5.1.1 on my ios and i want to update to 6.1.2 not 6.1.3 ive downloaded the 6.1.2 file but for some reason i keep getting (3194) error.. what do I do?

You are getting the 3194 error because you cannot update to 6.1.2, since it is no longer current.
The fact that you downloaded the 6.1.2 file does not matter. If you upgrade, you must upgrade to the latest version.
I cannot imagine why you would not want to update to the current 6.1.3 version instead of 6.1.2.

Do I need an external voltage converter for Spain or is the white box on the end of my MacBook Air cord enough?

Do I need an external voltage converter for my trip to Spain, or is the white box on the end of my MacBook Air power cord enough of a converter?

Thank you very much! Apple telephone support couldn't come up with the answer. I won't haul that heavy external voltage converter to Spain. It weighs a lot!

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

Best file converter for .mpg to .mov

I am trying to import movies in .mpg format to iMovie 11 which requires a .mov format. I want a free file converter that won't sacrifice the video quality.

If your movies are MPEG1, then MPEG Streamclip will convert them for free.
If your movies are MPEG2, you may also need the Apple QuickTime MPEG2 Playback Component, which is $20 from Apple. MPEG Streamclip will tell you if you need this.
Drag the MPG file into MPEG Streamclip. Click the play button to ensure that it plays and all is well. Then use FILE/EXPORT TO QUICKTIME and choose a codec for your needs. I recommend Apple Intermediate Codec.
Detailed Instructions....
Get MPEG Streamclip, which is free.
You may also need the Apple QuickTime MPEG2 Playback Component for $20.
Follow the instructions on the MPEG Streamclip website for installing the Apple QuickTime MPEG2 Playback Component. Here are those instructions for Mountain Lion and Lion as of 2012-11-05...
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion and Mountain Lion. Apple states the component is unnecessary in Lion and Mountain Lion, however MPEG Streamclip still needs it.
To install the component in Lion or Mountain Lion, please download MPEG Streamclip 1.9.3b8 betaabove; inside the disk image you will find the Utility MPEG2 Component M. Lion: use it to install the MPEG-2 Playback Component in Lion or Mountain Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion and Mountain Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion and Mountain Lion. You don't have to install QuickTime 7.
If your security settings will not let you run UTILITY MPEG2 COMPONENT M.LION, then you can override the security by
1. Hold down "control" button
2. Click on the app that is triggering the message about the security preferences
3. Select "open" to override and install/open the application
For more on the security settings see this document.
http://support.apple.com/kb/ht5290

.wid file opens for some developers Web Intell Rich Client but not others

4 developers with same BO client installs @ 12.2.7.598** (server at 3.2 SP 2.7)
2 can read demo .wid files and 3rd party supplied .wid file, 2 cannot!*
Error produced when running:
An internal error occured while calling 'openDocumentMDP' API. (Error: ERR_WIZ_30270).
Last few lines of Trace file produced for the 2 that cannot run the .wid(s):.
ERROR COMPONENT="WIS" ERRORCODE="30270" ERRORTYPE="USER" MESSAGE="An internal error occured while calling 'openDocumentMDP' API. (Error: ERR_WIS_30270)" PREFIX="ERR">
<DEBUGINFO BORESULT="5" FILENAME="kdgWICDZ_i2.cpp" LINEPOSITION="792" MODULENAME="WICDZServer_i"/>
<REQUESTINFO COMMANDID="" COMMANDNAME="" DPID="" DPLONGNAME="" DPNAME=""/>
-Tried removing all files under LocData, the error still produces and
creates a new trace file.
-tried 2 that can open .wid to "open and save for all" a .wid and send back to us 2 that can't open, still no success
Please Advise,
MAC

Hi,
First of all, you'll need to work out if the problem is install/machine based, or user-based. Get the users than can't open the file to log in on the machines of the two people that can open the report. What happens?
If they can open the report on the other machine, it's a client issue, I'd suggest a double-check that the versions match and/or a re-install.
If they can't open the reports on the other machines then it's a server/user problem. Either examine the user accounts to identify the differences, or just re-create the users from scratch to match the two users who can open the reports.

Where can I download raw file converter for panasonic gh4

Is aperture raw file converter compatible with Panasonic GH4

Panasonic LUMIX DMC-GH4? That camera is not yet supported, see the list of currently available RAW support: http://www.apple.com/aperture/specs/raw.html
It usually takes a few month after the release of a new camera for the RAW support to be available. As a work-around, use the software that comes with the camera (probably SILKYPIX Developer Studio), to convert your RAW to a different lossless format (e.g. TIFF), while you are waiting.

I have very large file sizes for some documents.

Some of my documents are 5000 KB up to 7000 KB. Most of them are around 200-300 KB. I have a lot of graphics, but they are linked (not embedded). These graphics average about 25-60 KB in size. Even if I had 20 graphics, that would still not account for the large size..would it???
Does anyone have an idea how to minimize these files sizes?
I am using FrameMaker 11.
Thanks

> ... I have NO idea what you are saying ...
Save the document in MIF format to a .mif file.
Open the .mif with a plain text editor (Notepad will do).
Look at typical MIF markup on the first several pages. It will be short lines of simple words and numbers like:
#    Document Dictionary
#    Variables
<Units Uin>
<CharUnits CUpt>
<ColorCatalog
< Color
< ColorTag `Black'>
< ColorCyan 0.000000>
< ColorMagenta 0.000000>
< ColorYellow 0.000000>
< ColorBlack 100.000000>
< ColorAttribute ColorIsBlack>
Search for "<DocFileInfo"
The next block of lines represent a binary data object in the document that is encoded as hexadecimal text in the MIF. In a document using only Import-by-Reference for external objects, that should be the only instance of such a block:
<DocFileInfo
3C3F787061636B657420626567696E3D27EFBBBF272069643D2757354D304D7043656869487A7265537A4E5463 7A6B633964273F3E0A3C783A7861706D65746120786D6C6E733A783D2761646F62653A6E733A6D6574612F2720 783A786170746B3D27584D5020746F6F6C6B697420322E382E312D
32382C206672616D65776F726B20312E35273E0A3C7264663A52444620786D6C6E733A7264663D27687474703A 2F2F7777772E77332E6F72672F313939392F30322F32322D7264662D73796E7461782D6E73232720786D6C6E73 3A69583D27687474703A2F2F6E732E61646F62652E636F6D2F6958
Scroll through the file looking for other such blocks. For example, a screenshot pasted into an anchored frame might appear as:
=DIB
&%v
&BMFF1\x00000000003600000028000000970300009204000001001800000000001046310000000000
&0000000000000000000000009C14008C10008C10008C10008C10008C10008C10008C10008C10008C
&10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10
&008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C10008C1000
And in that test I just ran, including a 1920x1280 color screenshot exploded the size of the .fm file from 300kB to 3.5Mb.

HP TS 618QI... in need of power cord and for some reason my TS doesnt exist to even HP

I have the TS 618QI and need a new power cord and for some strange reason my TS doesnt even exist to HP can someone please help me in finding a new cord please?????

you mean the power cord to your AIO pc ?
you can go to the store and get those to replace your power cord
if the cord is not the same you can order those at hp
http://h20141.www2.hp.com/hpparts/default.aspx?mscssid=A052DBDC0B1142C9AEEFF775A33B94F6&cc=US&lang=E...
also you can call parts department if you not sure about your pc model 1-800-227-8164
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

I can´t view any PDF-files. Nothing happens when I click on a PDF-file. For some weeks ago we installed Adobe CreativeSuite6 on my computer. What should I do?

For some weeks ago we installed Adobe CreativeSuite6 on my computer. What should I do?

Hi Daniel ,
What happens when you try to open a PDF ?
Are you facing challenges with all the PDF' or any specific one?
Please refer to the following link for more information regarding the same .
Let us know how it goes.
https://helpx.adobe.com/acrobat/kb/cant-open-pdf.html
Regards
Sukrit Dhingra

How the hell do I download adobe raw to dng file converter for Mac OSX

I have been trying for the last 3 hours and all adobe does, however you click on the hundreds of search results, is to route me back to their free trials on products page. A disgusting wast of my time.

if you're looking for the dng converter for windows, http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

I need a SDR2 file converter for some CCTV images URGENTLY

Similar Messages

Maybe you are looking for