I need a solution for a Muse/BC shortfall regarding phone pages with tag_pagecontent please

Hi, I wonder if you can help?
Our website is very content driven, with News/Jobs/Deals being uploaded throughout every working day, so I need to find a work around for the fact BC doesn't produce URLs/announcements with 'phone' in the URL like it does with the static pages, thus traffic browsing our mobile site ends up on the desktop version somewhat defeating the object.
Any help or suggestions much appreciated as how we can make the best of this situation?
Regards
Tom

Hi Tom
Have you tried enabling mobile support for BC generated urls ?
I would suggest you to get in touch with BC support and then will guide you with steps for how to achieve this.
Thanks,
Sanjit

Similar Messages

I don't want Adobe to open up and be selected immediately. I work with iPhoto and Ipages etc and preview which needs to be my main application for my work , but need adobe reader for other files... how can I do this please?

I don't want Adobe to open up and be selected immediately. I work with iPhoto and Ipages etc and preview which needs to be my main application for my work , but need adobe reader for other files... how can I do this please?

loopiloo1 wrote:
I don't want Adobe to open up and be selected immediately.
Sorry, I don't understand this - you don't want Adobe [Reader] not to open when doing what? On what operating system?

We are upgrading to apple 5s from android i have an ituns account. will i need anothe account for my wife. 2 apple phones how many itunes acconts Please Thank-you Moose in Utah

We are upgrading to apple 5s from android i have an ituns account. will i need anothe account for my wife. 2 apple phones how many itunes acconts Please Thank-you Moose in Utah

Hello mooseinutah, getting a new phone is always exciting! You will want to make sure to setup 2 separate Apple Id & passwords for each phone so that contacts & stored information are not merged between both devices.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Need a solution for integration BPM and UCM 11.1.1.4?

Hi all,
Currently, I am using BPM & SOA 11.1.1.4.
Could somebody advise me a solution for integration BPM and UCM ?
I heard somebody said that need to wait to BPM 11G patch set 5 (11.1.1.6) version, which have basic BPM and UCM integration and haven't to using external API like RIDC or CIS.
Thanks & Regards.
Ming Nguyen.

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Need a solution for my problem. My stuff seems to be gone.

Hi.
I have an annoying problem which I solution for. When I started my laptop and logged in on my account, (there are two, my account's the administrator) everything on my desktop seemed to be deleted. But when i looked in C:/ it was still there, all the foto's
music and stuff. Before the problem, i had a background for my desktop and many shortcuts. Now i dont have any shortcut and when i go to library's, it says that the folder is empty. But when i go to -DELL is my account- C:/Users/DELL/pictures, every picture
seems to be there. What's also weird is that when i log on to the other account which isn't an administrator and which i don't use that often, nothing has changed.
PS: I have a windows 7 laptop
Please help
(sorry for bad english)

Wahh Wahh stfu I never asked anyone to my work for
me. All i asked for is help. If you read your first post and honestly consider it to be a reasonable request for help, rather than a lazy twat whining to have his work done for him, then you need even more help in basic communication than you do in computer science.
Apparently the people
that fill this board are just too good to help or put
anyone in the right direction to help.And yet, thousands of people get lots of very good help here. So is it just random whim, or do the people who get help do something different than knobgobblers like you?

I need a solution for the deprecated readLine() method .

import java.io.*;
import java.net.*;
class UC {
public static void main(String args[]) throws Exception
DataInputStream inFromUser = new DataInputStream(System.in);
DatagramSocket clientSocket = new DatagramSocket();
InetAddress IPAddress = InetAddress.getByName("hostname");
byte[] sendData = new byte[1024];
byte[] receiveData = new byte[1024];
while(true)
String[] sentence = inFromUser.readLine(); /* It says the readLine() method is deprecated. what is the solution for this? */
          sentence.getSubstringBytes(sentence,0, sentence.length(), sendData, 0);
//sentence.getBytes(0, sentence.length(), sendData, 0);
DatagramPacket sendPacket = new DatagramPacket(sendData, sendData.length, IPAddress, 9876);
clientSocket.send(sendPacket);
DatagramPacket receivePacket
= new DatagramPacket(receiveData, receiveData.length);
clientSocket.receive(receivePacket);
String modifiedSentence =
new String(receivePacket.getData());
System.out.println("FROM SERVER:" + modifiedSentence);
     public void getSubstringBytes(String sentence,int space,int Size,byte[] sendData,int space)
               byte[] bytes=sentence.getBytes();
               System.arraycopy(bytes,0,sendData,0,sentence.length()-0);
}

Sorry, It should be the BufferedReader , not BufferedInputStream.

Need OWA solution for Q10

Our IT department only supports OWA for remote access to email. Activesync is not enabled and will not be enabled. POP and IMAP are also not allowed. I upgraded from my Bold to Q10 and now cannot access email remotely. Why is there no solution for this Blackberry? Below is from KB03133. Why is blackberry assuming IT departments will have activesync enabled.
Note: BlackBerry 10 does not support integration of Outlook Web Access email accounts. However, most Outlook Web Access accounts will have Active Sync enabled. To determine if Active Sync is enabled and to confirm the settings, contact the IT administrator for the account.

All the IT departments I know of either use BES exclusively or they enable ActiveSync. There is no other solution I know of for BlackBerrys. BB10 was designed specifically with AcitveSync in mind.

Need a solution for updating values in table

My oracle version is 11 and my table name is nit_xml in which column name is cust_dtls
Data's of nit_xml table
<root>
<Cust_dtls> Nitesh </Cust_dtls>
</root>
I just want to update Nitesh to Nit ..
Its i inserted values through this way
INSERT INTO nit_xml
VALUES (
'<root>
<Cust_dtls> Nitesh </Cust_dtls>
</root>'
So i tried updating in my own way as like this way
UPDATE nit_xml
SET cust_dtls = '<root>
<Cust_dtls> Nitesh </Cust_dtls>
</root>'
WHERE cust_dtls = '<root>
<Cust_dtls> Nitesh </Cust_dtls>
</root>';
But not working so can anyone give me ideas on XML as how it works and is it possible or not to update through query .. Its note that i want to update column cust_dtls based on same column value and not any other datatype as number or varchar2 because based on other datatype it worked easily and second thing its i am using TOAD application so in that manual updation is possible which is fine but i need to update through query directly ..
Regards,
Nitkhush ...

Niteshkhush wrote:
My oracle version is 11 and my table name is nit_xml in which column name is cust_dtls
TABLE nit_xml
Name Null? Type
CUST_DTLS XMLTYPE
This is new data I have inserted newly now ..
<H>
<cust_dtls>
<cust_name>Nitesh</cust_name>
<cust_phone>9790755104</cust_phone>
<cust_place>Ambattur</cust_place>
</cust_dtls>
<x2>
<cust_name>Bharathi</cust_name>
<cust_phone>123</cust_phone>
<cust_place>Mylapore</cust_place>
</x2>
</H>
Update query :
UPDATE nit_xml
SET cust_dtls = UPDATEXML (cust_dtls, '/root/cust_phone/text()', 132345)
WHERE TRIM (EXTRACT (cust_dtls, '/root/cust_phone/text()')) = 9790755104;
Its showing as 0 rows updated i cant find out any reason as what's happening .. I want to know also as why without TRIM its extraction is not possible ...Your XPath is incorrect. it should be /H/cust_dtls/cust_phone/text(). You dont have a tag as root. Its H.

Solution for Poor signal in a wireless WDS network with two Airport Extreme

I have just bought my second Airport Extreme to create a wireless network with the best possible signal. I have one Airport Extreme in my office and the second one (supposedly the remote base) in the living room, two brick walls and 7 meters away. I have follow Apple instructions for the setup, main base "Create a Wifi Network" and Extend network option selected. The remote "join an existent network" and Allow wifi clients selected. According to Apple this is a WDS network between two Airport Extreme.
The network is working and the signal from my iMac is very good in my Office. In the living room the signal with my PC laptop is also very good.
Problem is that my iPod Touch OS 3.0 (I use it as a remote control in my living room with a twonky media server) gets now a very weak wifi signal in my living room, in many cases I lose the wifi sgnal although I sit two meters away from the remote Airport Extreme in the Living Room. If I go to my office with the iPod, then I get a good signal.
I think that only the first Airport Extreme in my Office (Main Base) is emitting a wifi signal and the second Airport Extreme (remote) is only receiving the wifi signal not making a repetition of the wifi signal. (Sorry for my explanation, I am not technical on this.)
I thought that, in a WDS configuration, the remote Airport Extreme WAS suppose to also replicate the wifi signal in my living room.
I have also tried a WDS manual setup with the two airport with the same results.
Is there a solution for this?. Do I have to connect the two Airport Extreme with a wire ethernet in order to be able to have a wifi signal strong enough in my living room for my iPod Touch?.
Thank you for your time.

Thank you Bob for your time.
I understand from your words that with a DHCP reservation I can force de Airport Extreme Main Base to assign an specific IP to a particular client in the network. Is that correct?. If that is the case, I will reserve the 10.0.1.3 to the Twonky Media Server (I need this to be fixed to this IP) and I will change the configuration of the remote Airport Extreme to DHCP automatic.
I will give it a try in a few days. I have spent so many hours with this set up that I am a bit terrified to start again today, to tired from work.
Just one last question. Setting up the remote Airport was very difficult with the Airport Utility. I had to reset and start many times as I always got two errors in the set up:
1.- Internet not connected.
After a minute or so, most of the time the problem was corrected automatically as the remote found the main base that is connected to the internet. I got a confirmation message for this.
2.- Second problem was that Airport Utility said that it could no connect the remote to the specified network. Sometimes (not always) the remote light turn green both in the Airport Extreme and in the Airport Utility, BUT I never got confirmation of a successful installation. Nevertheless, the connection was established because the wifi network exist.
Do I have to "disable the WAN port" during the installation of the remote Airport to avoid the problems?.
Best Regards,
Fernando

I need a solution for a lab view apllication and installer problem

I ,ve already deployed an application and an installer, when i run the executable and the installer on my laptop it run well,
but when i run them on a computer that does'nt have a labview it gives me a messege says that i need to install the labview run time engine 8.5
actually i 've included the run time engine to the installer and i 've installed the run time engine from labview 8.5 cd,
but it still give me the same messege.
information you might need:
I'm using in my project the following:
-network shared variable
-data base connectivity functions
-report generation functions
-visa functions
so if any one can help me with this up?????????
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Solved!
Go to Solution.

Dear Mahik
I 'll post some snapshots of my project here so you can checke it out.
just let me tell you that when I run my app. & my installer on a computer that has a lab view and DSC it works well,
but when I run it on computer that doesn't have a labview it gives that error messege.
i'm hopefullt waiting for your reply with some solution
thanx
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Attachments:
Building My App.2.JPG ‏80 KB
My Project.JPG ‏118 KB
Building My App..JPG ‏88 KB

I need a solution for node-webkit and libudev.so.0

Hello there!
I'm developing the package of node-webkit in the aur. Since the first time I had trouble with libudev.so.0. The first quick fix was to generate a symbolic link to libudev.so.1, but this is not the best way and can destabilize the system.
The symbolic link is the recommended workaround for this problem at the moment. I don't think there will be a fixed version in the near future. By reading the issues on the bugtracker of node-webkit I found a solution by using a start-script and rewrite the LD_LIBRARY_PATH. This variable is missing in Arch, so I thought, I can add a file into /etc/ld.so.conf.d/. It's not what I wanted, because the library is then globally accessible, but it works on my machine.
I think there must be a better solution. Best choice would be a shell startscript in my opinion, but I don't know how.
My own package of libudev.so.0 were be deleted with the comment: "it is not needed, you can just provide a symlink to libudev.so.1". One say this, another say whatever -.-0 It's annoying. I really want a solution!
Here is the PKGBUILD:
pkgname=node-webkit
pkgver=0.6.0
pkgrel=2
pkgdesc="node-webkit is an app runtime based on Chromium and node.js."
arch=("i686" "x86_64")
url="https://github.com/rogerwang/node-webkit"
license=("MIT")
depends=("alsa-lib" "gconf" "gtk2" "nss")
optdepends=("nodejs: npm package support"
"nw-gyp: native add-on build tool for node-webkit")
if [ "$CARCH" = "i686" ]; then
_arch="ia32"
sha256sums=(
"4b3f45cbb023d043955620a1f84b239249ac00a2649834c0c675d1574462f307"
"c77f5c8bcbce1c8f12d574538845ff5b467fd1acc9e5998f459abcf6b4b7fec3"
fi
if [ "$CARCH" = "x86_64" ]; then
_arch="x64"
sha256sums=(
"a8fb4c045cc5de78d1ac784c50c1eda986d6ccbe82778f6285c5da1bfceda64e"
"fe517d0cf7f374477fcbd654b57f1bc8660069c522625bb06f4d5fc565fdede3"
fi
source=(
"https://s3.amazonaws.com/${pkgname}/v${pkgver}/${pkgname}-v${pkgver}-linux-${_arch}.tar.gz"
"http://arm.konnichi.com/core/os/${CARCH}/udev-182-4-${CARCH}.pkg.tar.xz"
package() {
msg2 "create path and copy files"
mkdir -p $pkgdir/{etc/ld.so.conf.d,usr/{lib/${pkgname}/lib,bin}}
cp -R $srcdir/${pkgname}-v$pkgver-linux-$_arch/* $pkgdir/usr/lib/node-webkit/
msg2 "copy libudev.so.0.13.1 -> /usr/lib/node-webkit/lib/libudev.so.0"
cp $srcdir/usr/lib/libudev.so.0.13.1 $pkgdir/usr/lib/node-webkit/lib/libudev.so.0
echo "/usr/lib/${pkgname}/lib" > "$pkgdir/etc/ld.so.conf.d/${pkgname}.conf"
msg2 "symlink /usr/bin/nw -> /usr/lib/${pkgname}/nw"
ln -s "/usr/lib/${pkgname}/nw" "$pkgdir/usr/bin/nw"
msg2 "symlink /usr/bin/nwsnapshot -> /usr/lib/${pkgname}/nwsnapshot"
ln -s "/usr/lib/${pkgname}/nwsnapshot" "$pkgdir/usr/bin/nwsnapshot"
Last edited by blackcat (2013-06-21 22:10:55)

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Need a solution for flash videos on my site...

Here is the deal. My website www.jonbarron.org has a few
flash videos on it (some of them as long as 30 minutes or so) and
while this website is not purely based on videos or media like that
I am noticing that the videos when you watch them can get very
choppy. I'm assuming this is because they need to be streaming or
something which would require use of a Flash Media Server hosting
soultion. EIther way I'm not sure if I should get a Flash Media
Server Web Host because like I said the video section of the site
is pretty small with only a few videos. I would however like some
input on what everyone thinks is my best solution to the choppy
videos on the website which can be found at...
http://www.jonbarron.org/video/video.php
Should I invest in a Flash Media Server Hosting plan (I don't
think I want to do this because for unlimted connections it's over
1500 each month!) or is there a way to make the videos less choppy
without downsizing them anymore then they already are? I'm a little
confused here when it comes to Flash Video on the web since I'm
rather new to this area...

They work fine for me, but I know what you mean. Don't invest
in a media server just yet...
Try increasing the buffer time on all of the movies. That
should fix any choppiness on the videos on computers that aren't
using a superfast connection.
Let me know if you need help adjusting the buffer. It's
pretty easy, just click on the FLVplayback component and open the
component inspector window. There is a spot for buffer size, make
it anywhere from 3-15-30 seconds, depending on how much you want to
buffer it.

Need a solution for multiple sites and multiple cameras

Hello,
I have a customer who has 3 different sites all in different locations. They are not connected through VPN however they do have a terminal server at the main location. They have 6 cameras total, 2 at each location. They are looking for a way to be able to connect all of these cameras to a centeral location (i.e. website, server, ect.) so that all 6 cameras can be viewed on the same screen by different users who would be given access. I am looking for the best solution working with a tight budget. Let me know your ideas and how you would implement it.
Thanks!

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Needs a solution for loading Crystal Report

Hi.....
I have already desiged & loaded crystal reports through SAP B1 Main Menu.
But I need help (Code in C#.Net) for loading a crystal report template(already created) for a System form (eg; A/R Invoice) immediately after the form load by a menu click(means through UI interface)
and report generated by identifying the Forms Document Number.

HI...
See this following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section2
Regards
Billa 2007

I need a solution for the security questions please ?? In the other hand i can't use the rescue email !! I need help .

I need help for those security questions please !! I don't have a rescue email and even i don't know how to add it ! Please help me

I didn't mean to give me an answer for the security questions i mean that i didn't remember the answers and i don't have a rescue email to send in it , i'm just ask for sloution to reset my security questions got it?

I need a solution for a Muse/BC shortfall regarding phone pages with tag_pagecontent please

Similar Messages

Maybe you are looking for