I need a v.10.5 driver to run a Canon SELPHY and my Mac is v.10.9.4. How do I make this work?

I have a Canon SELPHY printer that requires a MacOSX v 10.5 driver. I cannot get it to operate with my Mac. What do I do?

This page has a CP760 driver for OS X 10.7. Alternatively you could use the Gutenprint drivers from here. Be sure to read the special note(s) for use of the Gutenprint drivers with dye sub printers.

Similar Messages

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I just looked at the Canon site and it has Mavericks drivers.
http://www.usa.canon.com/cusa/macosx_lion/multifunction_printers/pixma_mx_series /pixma_mx870?selectedName=DriversAndSoftware

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. Anyway, i deleted windows and want another OSX on there instead. How do i make this partition bigger please??

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
Is there a way to do this, i have all installation discs from original OSX so think this could help.
Any help please would be fantastic.
Thanks Chris

Hi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
Thanks again

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know.

I have an external hard drive with numerous WMA files that I would like to download to iTunes. How do I do this on my MAC?

I have an external hard drive with numerous WMA files that I would like to download to iTunes. How do I do this on my MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I need to transfer standard 9 from an exsisting laptop to a new laptop but cant find the CD. How can I do this?

I need to transfer standard 9 from an exsisting laptop to a new laptop but cant find the DVD. How can I do this?

First download AA 9 (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) and save it to a backup drive (HD and/or CD). Get your S/N (you may have to go to https://www.adobe.com/account/my-products-services.html to look it up, assuming you registered).

I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard. When I run the Snow Leo install it errors saying I need OS 10.5 to run the install. How do I get around this? I've read that it's possible to go direcectly from 10.4 to 10.6.

I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard. When I run the Snow Leo install it errors saying I need OS 10.5 to run the install. How do I get around this? I've read that it's possible to go direcectly from 10.4 to 10.6.

To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

I set up my ipod 5 over wifi and now everytime i connect it using the cord to the computer it tells me i need to set it up. How do i make this go away?

I set it up over the wifi becuase i felt like it. I put a cd i had onto itunes and i cant put it on the cloud so i connected my ipod to the computer using the cord. when i plug it in it says i need to set it up. how do i make this go away

Syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
However, you can only sync music and videos .
If you want to sync all media:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just limited music on it but she also also has an IPAD mini for home that is fulllyloaded with apps . How do I set up Itunes to make this work

I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just the music (no apps) on it but she also also has an IPAD mini for home that is fullly loaded with apps. The last time I tried to connect 2 devices to Itunes I ended up loosing my own music library so I am a bit hesitant to start setting up this new IPOD touch with outsome help. Anyone have any ideas on how I set up Itunes to make this work and not loose her IPAD apps and media?

Open itunes, connect ipad, select what you want, sync.
Connect ipod, select what you want, sync

I'm trying to watch a movie from my iPad on my tv with Hdmi cable. Do I need to do anything to the tv to make this work?

I'm trying to watch a movie from my iPad on my tv with Hdmi cable. Do I need to do anything to the tv to make this work?

Not really. Using the correct Digital Av adapter and connecting the iPad to the Tv through one of its HDMI ports is all it takes. Of course making sure the correct input is selected in the Video source selection on the TV.

HT1689 I need to get my iPod to no longer be associated with the original i store account. My husband set it up through his account but now I have my own account. I don't want to go through his every time I want to make a change. how do I make this change

I need to get my iPod to no longer be associated with the original i store account. My husband set it up through his account but now I have my own account. I don't want to go through his every time I want to make a change. how do I make this change?

I am trying to stop using my I-pod under my husband's I-Tune account. It was set up under his account and the only way I can use it under my account is to erase all of the songs my husband loaded on for me. I had heard there is a duration that I-Pods are locked into to one account only, and I am trying to discover how I can use my account without having to erase everything on the I-Pod. I know it sounds confusing but that's the way I-tunes have set it up. thanks for asking.

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
Thank you!

When you erased the disk did you select Mac OS Extended Journaled as the format option?

I need a v.10.5 driver to run a Canon SELPHY and my Mac is v.10.9.4. How do I make this work?

Similar Messages

Maybe you are looking for