I need a vi converted from LabVIEW 9.0 to 8.6 or 7.1
I have a few vis that need to be saved to an earlier version. These are in version 9.0 and I need them in 8.6 to open them. It would be better if I could get them in 7.1.
Solved!
Go to Solution.
Attachments:
Grab_continuously_new.vi 380 KB
Mikrotron.llb 337 KB
I converted them into 8.6, I was missing a few dependancies (mvfgi5.dll) so I just ignored them.
Attachments:
Grab_Continuously_New_86.zip 390 KB
Similar Messages
-
Convert from LabVIEW 2011 to LabVIEW 9.0
Please convert from LabVIEW 2011 to LabVIEW 9.0
Attachments:
Watlow Vis.zip 76 KBLooks like somebody forgot to attach the zip file. Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Watflow.zip 57 KB -
Converting from LabView 4.0 to 8.5
I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?
Hi EKY,
converted to LV7.1 - should be ok now
But: there's a "missing dll"-error. You have to check this in LV8.5.
There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
TC081_LV71.LLB 29 KB -
Converting from LabView 4.0 to 9.0
I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
Attachments:
gj18i.llb 247 KBHey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1) for me! Thx
Attachments:
lgy1m.llb 73 KB -
Do I need a wattage converter from US to AU for my Macbook Pro?
I am traveling to Australia. Will I need a wattage converter for my MacBook pro?
Going from USA to Australia.
Please Help and Thanks!"although you may need a plug adapter....I do not know what plug type is used in OZ"
They have them on Amazon.com, not expensive a few dollars -
Down convert from LabView 9.0 to 8.6
I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
Thank you.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel_LM6.vi 26 KBOnce again, saved in 8.0
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read_Value_From_Excel_LM6_nijams.vi 36 KB -
Convert from Labview 5.1 to labview8.6
Hello Everyone,
Can any one please convert this vi from labview 5.1 to labview 8.6 or labview 2009
Thanks in advance
Nadim
[email protected]
Attachments:
4-Channel Power Spectrum with estimate.vi 750 KBHi,
Here it is in LV 8 but there are some VI's missing (DAQ)
Kees
Attachments:
4-Channel Power Spectrum with estimate.vi 402 KB -
Help needed to up-convert my labview files from 5.1 to 8.6
I can't find any resource to up-covert a few of my old 5.1 vi's to labview 8.6. Can anyone convert them?
Thanks for your very appreciate help.
Roberto-
Solved!
Go to Solution.
Attachments:
oldVIs.zip 252 KBattached as 8.2, which you can open
Attachments:
oldVIs.zip 156 KB -
Help needed Importing a string from labview into matlab for file opening
Hello,
I am using labview to allow the user to pick the file to open via the
open labview measurement file block. Then I take the filename and
convert it from a path to a string and try to import it into my matlab
script which I use dlmread() to open my data file. However the
datafile does not open. I was wondering if anyone would help me with
this method?
Thank you,Hi Nicole,
Are you using the Matlab Script Node or the MathScript Node? I know that dlmread is not currently implement with MathScript (although R&D is looking at implementing further features for future versions of LabVIEW). Also, I'm not sure which VI you are using to get the file path because there isn't an "Open LabVIEW Measurement File" VI. There are Read & Write LVM and a simple Open\Create\Replace File VI--are you using one of these? If you are using the Open File VI, Matlab may be unable to read from the file because it is already locked for editing by LabVIEW.
I hope this helps!
Megan B.
National Instruments -
Need a file converted from InD CS5 to InD CS4...
Had someone do some work for me and their source file came as a CS5 InDesign version 7 file (I think)... which I cannot open in CS4 InD version 6. Is there such as thing as file converter of some kind or do I need to have them or someone else open it in CS5 and save it in some compatible format?
Yes (well, to the 2nd part of your question).
Ask someone who has a CS5 to save it as IDML, or (always an option!) download the fully functional trial of CS5, and you have about 30 days to do it yourself. -
Please Convert from LabView 2013 to 2011
Hello, Could someone please convert these VIs from LV13 to 11 please?
Thanks,
Laura
Solved!
Go to Solution.
Attachments:
Syringe Pumps New.zip 953 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Syringe Pumps New.zip 364 KB -
Convert from LabVIEW 5 to LabVIEW 2014
hi,
I could not open VI. Could you convert this vi to LabVIEW 2014
Attachments:
mslumsrs.vi 432 KB
mslumsrs.vi 432 KBThat's okay. You can't.
The message about the duplicate post is some forum housekeeping to save people's time responding to this message in the event the other message is already answered. It just directs everyone to the first thread in case they stumble across this one first. -
Loader (Need help to convert from AS3 to AS2)
Since I know this code works fine and that I use it into one of my AS3 flash, I need it in one of my AS2 flash and I don't know how to adapt it. I've searched in over 100 threads and I can't find something similar... Thanks to help me get it to work in AS2! Since I need it in AS2, I thought it would be the right place to post it.
I posted all the loading process code, but I would need help mostly with the Loader part. How to do it in AS2? Thanks!
var img = 0;
var image_total = 0;
var myImages_array:Array = new Array();
var myBitmaps_array:Array = new Array();
function Init();
// Images urls are loaded into an array before this call
LoadImage();
function LoadImage()
if (img < myImages_array.length) // img is the current image index and myImages_array is my array of URLs
// I need help with this part please
var loader:Loader = new Loader();
// returns the image full path and load it
loader.load(new URLRequest(my_site_url + myImages_array[img]));
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
else
if (count == 0)
// When everything's loaded, I'll start loading my Bitmaps into a small slideshow
count += 1;
init_slideshow();
function imageLoaded(e:Event):void
var image:Bitmap = e.target.content;
// Bitmap manipulation here (removed)
image_total = myBitmaps_array.push(image);
if (img < myImages_array.length)
img += 1;
// Call next image
LoadImage();
function init_slideshow():void
// Reserts the current index for the first one
img = 0;
// Start the slideshow since everything's loaded
animate_slideshow();If you look at the Flash help documentation for the addListener metod of the MovieClipLoader class, there is an erxample there that you should hopefully be able to work from. It will be better if you get your stuff coded into AS2 before you pursue more help with it. IT is difficult to tell you how to fix something if you don't show what you are using.
-
Need help in converting old LabVIEW instrument drivers to new version.
Hello,
I just rented a Tektronix DG2020A data generator. I did not find any instrument drivers for the DG2020A on the Instrument Driver Network, although there are drivers for DG2040 that could be used to some extent. With the instrument, I also received a floppy with example programs. This does include LabVIEW drivers for the DG2020A. However, when I tried to load the VIs, I received an error message that the VI version 3.1 is too old to be converted to 7.1. Can someone at NI help with the conversion? It would be very useful.
Thanks.There is a driver available for the DG2020 on NI's site. Models supported are the DG2020, DG2030, and DG2040. Available in both 7.x and 8.x.
-
Convert from LabView 6.1 to LabView 6.0
Can anyone kindly save this VI's in 6.0 version. I do not have LV 6.1 and these VI's are written in LV 6.1 version.
Thanks,
Kishor
[email protected]
Attachments:
High_Speed_Data_Logger.llb 154 KBIt appears to be one of the example programs provided and as far as I know, it's there in 6.0 (it's a lot older than that I believe). From the help menu, select Find Examples and then go to Hardware Input and Output>DAQ>Solutions. High Speed Data Reader and High Speed Data Logger should both be there.
Maybe you are looking for
-
Windows 7 SP1 64-bit, T530 type: 2359. Windows Update downloads but can't install IE11 (error code 9C47). Also can't install from http://windows.microsoft.com/en-us/internet-explorer/download-ie or http://windows.microsoft.com/en-ca/internet-explor
-
Hello everybody. I am currently working with Sharepoint Online search and am trying to find information about managing Query suggestions (CRUD operations). Would anybody have any information as to how I could do this in CSOM or PowerShell ? I truely
-
Unable to boot weblogic webserver, Unrecognized option: -jrockit
Hello Experts, I am configuring first webserver domain in newly installed Peopletools 8.51 and FSCM 9.1 environment. Below are the details -- Server -- Windows Server 2008R2 (64bit) Weblogic -- 10.3.6 (64 bit) JDK -- jdk1.7.0.21 (64 bit) While instal
-
Deleting Old Versions of iTunes?
I have multiple versions of iTunes on my computer and I'm wondering if I can delete the older ones after installing the new updates. It seems to me that all they are doing is taking up space, but I don't want to delete them if it will cause problems
-
Client Backup Service stopped, can not be restarted
Recently I started to get a critical error saying the service Windows Server Essentials Computer Backup is not running. It did work before and I hadn't made any changes to the server. I can not repair the error / restart the service. It will stop aga