I need absolutely a white background for products I am selling online.

I am a beginner and need step by step instructions of where to find the tools. The product must absolutely be white. I have many more that I must change to meet the requirements. Please help! Thank you!
product image.

Open the image
Use the Magnetic Lasso Tool (press keyboard letter L), and select the shoe. When you have navigated around the shoe, you will see the selection outline ----"marching ants". This indicates that the selection is active.
Go to Layer Menu>Layer>New layer via copy, or CTRL+J
Make the Background layer active again, then go to Layer Menu>New>Layer
Go to Edit menu>Fill layer, in the dropdown select white. ok it.
Here is a print screen:
http://www.pixentral.com/show.php?picture=1pyqgoupEffFHD3gMxXLyVKLpQo
Here is the picture:

Similar Messages

Need to remove white background for use on dark background

Hi,
I have a stock image of some people on a white background. I need to remove the white background so I can use the image in a project with a dark background. However when I put the edited subjects on the dark background, the people all have noticeable white borders around them which I assume means I am not getting all of the white out, especially around the hair. Can anyone recommend the best way of overcoming this? Thanks.

Can anyone recommend the best way of overcoming this? Thanks.
There is no single "best way". It all depends on the resolution of the image and its other quality properties. The - theoretically - cleanest and less workladden method would be to extract the luminance e.g. by converting to Lab mode and selecting the L channel, then adjust the channel range. However, if the foreground also contains lots of bright colors, clipping back the channel black and white points would also affect them and you'd need more adjustments to compensate or work with teh refine mask tool a lot to feather edges just like you would with a conventioan layer mask created from an interactive selection. On top of that you may also still need to apply all teh other dirty tricks like using a dark inner glow to cover up remaining bright areas or fill the outside with a dark color... Really depends, but you should be prepared to invest some time. Using longwinded manual painting and cloning may even be required...
Mylenium

White background for portrait, How?

Hello dear people,
I have a simple question: How do I get a perfect white background for a portrait/headshot?
Jan Wind

If you are talking about removing the existence background and then placing it in white background, then just use the photoshop pen tool to select the image and then apply clipping path technique here. Hope it works for you.

HT201412 while using sometimes my iphone 5stops working and shows the apple logo with white background for 5 seconds and in short time it returns to home screen.please solve it

while using sometimes my iphone 5stops working and shows the apple logo with white background for 5 seconds and in short time it returns to home screen.please solve it

Hi there bencong111,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
-Griff W.

Need help getting all white background for jewelry pics and resizing help for my website

Can someone please help me? I'm completely new to photoshop and I have elements 12 and I need to make the background all white for my jewelry photos. I have googled instructions but a lot of my jewelry has chain in it so it's hard to select, erase etc. I have no idea what I'm doing. I also need to resize my photos to 400x400 but when I do they distort. Someone told me I can collect the background color and then resize the canvas but again I'm a complete newbie and none of this makes any sense to me.
Thank you

no worries.
you mentioned that you have tried a number of driver packs, to no avail.
can you confirm if you've tried this: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012809
ThinkPad 2x2 11a/b/g/n Wireless LAN PCI Express Half Mini Card Adapter for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) and XP
found in the X120e driver matrix, here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT072377
cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

ID 5.5 Interact. PDF, cannot remove white background for Multi-States and buttons.

Hi
I am working on an Interactive PDF Portfolio document. The problem I have is with Multi-State object feature with several buttons going to states that need to be exported as a SWF and imported back into InDesign 5.5. See, the background of my entire doc. is GREY, but when I import the SWF (as directed in Lynda.com videos correctly) and export the entire doc as Interactive PDF and view it in Adobe Acrobat Pro (version 10.1.1) is when all the trouble starts.
When I try to get rid of the WHITE background around the Multi-State objects and the buttons for them (using Select Object Tool and then control+click on it to change the Properties to Transparent Background Appearance) it does not change, even when I go forward and backward to the page.
Does the option of removing white background and making it transparent work only for Animation, but not Multi-State feature with buttons?
Can anyone suggest any other tecnique to create a nice slide show that works in Interactive PDF in ID CS5.5? Please..
Sincerely,
in need of help,
Eve

I have 8 Multi-State objects in one stack on the left and the 8 buttons for each state in the stack on the right. The background of my document is dark grey. There is space inbetween Multi-State objects and the buttons that show the grey background. But after exporting as SWF the Multi-States together with the buttons and placing the SWF back in the PDF file, the space inbetween Multi-States and buttons that is supposed to show the grey background appears white. The problem is that I cannot even change this white background to transparent in Acrobat Pro, as well. I used to do that to animations and it worked, but not in this case.

PSE3, how to make white background for silouette

I have taken a few pics of my grandkids in silouette form. That is, profile shots taken against window with snowy background. I've done a conversion to B/W, but need to darken it further. My main question is, how do I put a selection on a pure white background? Barbara, I have your book, but I haven't been able to figure it out yet. Do you have specific pages to look at? I know how to make a decent selection, but that's about it! Thanks.

Donna,
1. Make selection of silhouette
2. Go to Edit>copy
3. Go to File>new>Blank file> Color Mode:RGB. Background contents:White. Size H&W for your paper stock.
4. Go to Edit>paste.
5. Position selection with move tool.
Ken

WD ABAP: white background for table

Hi all,
I need to create a table with a white background. In the following link, though the "standard" design shows a white background, it is actually blue in the application.
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/ae0e422dfcdc2ce10000000a1550b0/content.htm
How do I change it to white?
Thanks,
Sravanthi

Hi Sravanthi,
You could use the property "Design" of cell editor like text viw/input box for this purpose.
Declare a an attribute in context of type of value of property Design(Check documentation) and set it value like "Emphasized" based on your requirements. This code could be in the method where you retreive grid data.
Next bind this context attribute to property "Design" of cell editor to selectively bold the font size.
Regards,
Srini.

White background for DIVs in CS6?

I have recently updated DW from CS5.5 to CS6 and when I open the pages of my websites, the DIVs show a white background when the background-color (or simply: background) property is not declared in the CSS or when it is set to transparent.
This means that in Design mode I often can not see the contents but the preview is correct under all browsers.
I do not understand why this happens, especially when background:transparent; is declared.
Does this happen to me only?
Thanks in advance for your collaboration.
Paolo

Hi helpvid, thanks for your reply.
I can not provide a link because the problem occurs in DW only, but I have taken a screen snapshot.
All of the divs that show a white background have the property background:transparent; declared in the style sheet:

Black or white backgrounds for books

I am making my first book. For those who have seen the printed versions, any thoughts on the choice of balck or white backgrounds on pages - or a mix of both? Thanks Ladymavis

Yes. If you're anywhere near serious about music and/or planning to put a decent amount of video on it, get the 60. It's $100 extra for twice the memory and better battery life. The only reason I can see getting the 30 is if the difference in thickness is more important than the above to you, or if you don't care about having your whole library on your iPod at the same time and want to deal with playlist or manual synching.
The black looks amazing, and it's distinctive from all the whites out there, although I'm sure that will be changing into a healthy mix soon. But the black looks better. If you're planning on taking care of your iPod, keeping it in it's case and not tossing it around, get the black. But it does show scratches easier than the white, so if you're a nature freak looking to listen to some music to get you amped for that next mountain bike sesh, (or if you're racist to an insane degree) might want to consider the white.

Message spaces are black with blue letters, need to get white background back

I've done something wrong! my background had gone black..all words are either hidden, or show up in blue. Something simple I hope, I can use the computer fine, just have black in some message areas .
This question was solved.
View Solution.

Hi dmerz, would you please share more information with me?
1. What is your model/product number of your computer?
This link will help you find the model/product number.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
2. Which operating system do you have?
This link will help you find which operating system you have.
http://windows.microsoft.com/en-ca/windows/which-operating-system
3. Could you please take a screen capture of the message box where you are seeing the issue?
This link will assist you in taking a screen capture. (You can select your operating system on the top right)
http://windows.microsoft.com/en-ca/windows/take-screen-capture-print-screen#take-screen-capture-prin...
I work on behalf of HP.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

White background for stills?

So I'm using the trial version of final cut and I don't have much background on FCP.
I loaded a still onto my time line and the background is all black. The image is there and visible but the rest of the background area is black. I want to change the background to white but I can't seem to make that happen. Can someone point me to a process to do this. I've looked but all I find is related to video.
Thanks

double post

Need to create a background for hompage header and site background - HELP

Hi there,
I am working on a website for a friend and I'm using Wordpress (for the first time) because they need to be able to maintain it without knowing html or css. So, I am using a template from Elegant Themes. So far, the site looks like this: http://dev.modernrestaurant.com
My friend wants a header similar to this: http://www.carminesnyc.com/
I would like to know how to create these types of images. I know my way around PS and FW but I'm new to the tiling, etc. that is necessary to make quick loading web pages. Any help would be great. After I create what I need to imagewise, I can then ask how to put it into the site (unless someone is a php wiz and wants to help me here )
Thanks!

Good day, AlieneGirl!
Sorry for offtopic, but I want to ask you: why does your friend prefer WordPress CMS for this site? I see, that you are doing site for restaurant, by the way, good idea! But, WordPress, in my opinion, better for blogs, communication and simple sites. Why dont you take Joomla, for example? Imagine: you open site of restaurant, looking for best dishes, than order them - add to a cart and courier brings it to you:) You stay at home and have good dishes! But WP is not good varuant for such site, I see that you have no "add to a cart" function. It's better to use Joomla CMS for this purpose. So, you may look at this variant wilema-mebel.by and see, that there is this funtion. Think that site will get more clients) And you can find a lot of templates for Joomla and correct them with PhotoShop

Can I batch resize all to 300px x 300px with some kind of white background for non square photos?

I want to resize all to 300 x 300 but I don't want to ruin the photo integrity but I want them to be exactly 300 x 300 for example if I have an image that is 500 x 400 I don't want it to be resized to 300 x 200 I would like it resized to 300 x 300 with a white bar frame

The answer is yes but doing that type of resize will distort your images and it can be done with a simple action. Image size Resample checked constrain unchecked width and height set to 300. With a script you could resize your images so that its shortest side is 300px then center crop the result to 300px by 300px you will loose some image pixels off the sides or the top and bottom. You can also resize the image and add canvas with an Action or script. The action would use menu File>Automate>Fit image (wihch is a script plugin) and set width and height to hight to 300. This may resize the image to something like 300x200 so you follow the fit image step with Canvas size set width and height to 300px

Authorization check for production order settlement

Hi All,
Production order settlement currently can be done by any user of any company code. there is a high risk involved in the same since unauthorized postings may happen. Hence we need to add authorization check for production order settlement. Can we maintain the same at the plant or the company code level?
Waiting for your replies. Thanks in advance!
Regards,
Aman Goel

hi
What venki has told abt the exit, its absolutely correct.Even i have used the same exit
     From table CAUFV pick Material(PLNBEZ),Basic Start Date(GLTRP),Plant(WERKS) .
     Pass parameter Material(PLNBEZ) and Plant(Werks) in table MBEW in respective fields i.e. Material(MATNR) and Plant(WERKS).
     Pick the latest record for the current period(LFMON) and year(LFGJA).
     Pick Product Cost Estimate number(KALN1) from the record and pass it to table KEKO.
     Check if Production Order Basic Start Date(GLTRP)<= BIDAT, if NO post Error Message.
This is the FS for EXit PPco0007
Reward if useful
Amit

I need absolutely a white background for products I am selling online.

Similar Messages

Maybe you are looking for