I need 'Advanced Help' !important!

Please
I just bought my ipod today, I did the thorough installation, iTunes, iPod, and Quicktime.
My iTunes is Version 6, the latest one.
Nano Ipod, Black
I have newest Quick as Well - - - -
My quicktime has Error:46 Active-X Control, Therefor I cannot open it up, and I am thinking this has nothing to do with my problem but this ISNT my problem but it is ONE OF THEM!
Okay, My Problem:::
I installed everything normally, it's all good until I open up iTunes, Plug in the USB Cord [connected to my nano]
and then I get the error...
"The software required for commucating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod
s software."
Note that I have reinstalled, I have been to the troubleshoot area, and have DONE EVERYTHING FROM THE HELP ON APPLE...Uninstall, Delete, Remove Local Temp Files, Ive looked on Google.com and well nothing has changed at all.
My Computer Information:::
System: Microsoft Windows XP
Professional
Version 2002
Service Pack 2
Compaq Presario
I would appreciate any help...Thank You
Compaq Presario Windows XP
Compaq Presario - Nano iPod 2GB Windows XP

After i have quicktime installed, I can view .mpeg, .vid ect
but if i click the shortcut to open up quicktime i get the same error...
http://img386.imageshack.us/img386/3564/quicktime26ly.jpg
During the quicktime download i got these errors from top to bottom...
http://img356.imageshack.us/img356/5375/quicktimeerror0qw.jpg

Similar Messages

Need Advanced Help on Opening a Crashed Project

I'm sorry to post many issues lately, but I've had a heck of a time this week trying to fix and recover a RH WebHelp project that is driving me nuts.
Today, I had just about finished re-importing all of my topics into a new project I had created that would have solved a rendering issue with my QT browser (I know it was working, because I uploaded output files throughout the day to my viewing machine and they worked great), when I happen to view one of my topics in HTML mode and noticed what I though was "errant" html code introduced from earlier "incident" (that's a story unto itself). I don't know why, but I deleted the <?rh-glo-start> tag on one of the lines in the topic (it was in a cell in a table). When I went to save the topic, the RH saving icon just kept spinning around and around and I knew I had crashed the project. I couldn't open it after that.
I went to Peter Grainge's web site (http://www.grainge.org/) and tried the various ways to try to open my project, but to no avail:
deleted the CPD and use the existing XPJ file to open it
used RoboHelp to browse to the HHP file to open it
even removed the topic from the project folder that I did the HTML editing
Any other stuff I could try?

Hi there
\..\..\..\.. isnt' a hard coded path. It's a relative path. Well, sort of. Typically a relative path is more like this: ../../../../
A "hard coded" path looks like this:
C:\SomeFolder\SomeOtherFolder\SomeFileName.Ext
LOL, perhaps we need a new term? Backward Cousin path?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

BRAND NEW APPLE USER IN DESPERATE NEED OF HELP IMPORTING VIDEOS FROM JVC!!!

I have an older JVC Everio. I have probably had it for 3 or 4 years. I don't exactly remember. Anyway, I have always used Dell products and they were tough to download videos to as well. What my issue is is that I have a Free Agent External Hard Drive with all my video files saved in the JVC .MOD format. When I open iMovie (version 7.1.1) and try to import the files from the external hard drive it doesn't even recognize these files as video files. I am no computer wizard (maybe that is obvious) and I could really use some basic help. I want to love this machine. I bought it for the video/photo capabilities. I shoot a Canon XTi 10.2 Rebel and have about 10,000 photos saved on the same external hard drive. I am looking forward to learning how to do this, but could use some much needed advice!!
Thanks!
Hoov

I believe this is what you want.
And, here's another: MPEG Streamclip .
The Cyberlink Prodirector software that came with the CamCorder or is available from JVC will also convert to other formats, but it isn't a Mac compatible program.
And, this site outlines how to import the files into iMovie.
Message was edited by: Kappy

Need more help importing single songs from CDs...please

Okay, I put the CD in, deselected the songs that I do not want to import, the ones I want are checked, then what do I do next? If I go to file and click import it takes me to a window to select iTunes, Playlist and so on. So, any help would be appreciated. Thanks.

I put the CD in, deselected the songs that I do not want to import, the ones I want are checked, then what do I do next?
Click on the "import" button in the bottom right corner.
You could've kept all your questions in the same thread you know!!

I need more help importing Z1 HDV footage

I'm trying to import HDV footage that was filed on a Z1
I tried to log and capture the footage from a tape reader with the HDV 1080i50 Easy Setup preset, but the screen was blank. I could see the footage on the tape reader screen but not in Final Cut.
I tried using different fire wires and different MACS but still no joy. As a final resort I tried a different MAC without changing the Easy Setup and leaving the project on the DV Pal preset, and it worked.
Any suggestions as to what I'm doing wrong? If I captured the project using the DV Pal preset, wouldn't the footage be overly-compressed? Or Am I thinking about this all wrong? The footage is definitely HDV!
And while I'm here does anyone know of any material that I could 'study' to help me understand the setups/compressions etc. I find it really confusing!
Thanks again
Ian

Most likely the camera is set to downconvert to PAL and iLink is switched on.

Badly in need of help: Importing asf-files to iTunes

Hi all,
I have a truely oldfashioned problem. I work as a teacher and some of the materials I use are on cd-rom using asf-format. I'd really like to import the files to iTunes (and then to my iPad, 3rd gen.) so that it's easier to handle when I don't have access to a cd-rom/dvd drive.
Do you have any suggestions?
Best
The Danish teacher

http://en.wikipedia.org/wiki/Advanced_Systems_Format
It might be very, very difficult to work with the files. It is strange that a CD would use a streaming format since that is usually a web page format. If it is in a proprietary format you will need a player specifically designed to accommodate that. then too they may be in WMA format instide that stream which means proprietary format inside proprietary format. That format is designed primarily for Windos systems so add on a third hurdle.
You can check out VLC media player and see if it will play them. You can likely copy the CD to your computer and use if from there. I don't know if you can find anything to convert though.

In need of help didn't install find my iPhone on my iPhone 5 and it got stolen from me at a dd's but I had my id and other important stuff in it I need to find it because I can't risk getting my identity stolen what can I do.

In need of help didn't install find my iPhone on my iPhone 5 and it got stolen from me at a dd's but I had my id and other important stuff in it I need to find it because I can't risk getting my identity stolen what can I do.

You don't have to install the Find My iPhone app - you need to switch the feature on in the settings on the phone.
If you go here: https://www.icloud.com/#find does your phone show up?
~Lyssa

Somehow I can't hear people talking on my iphone 4 either when calling or being called. I've bought this one for half a year. I need your help~Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

HT1338 trouble logging into my imac desktop, why wont it accept my valid password?? Please help I need to retrieve important files. Thanks.

trouble logging into my imac desktop, why wont it accept my valid password?? I was using it fine last night... Please help I need to retrieve important files. Many Thanks.

Do #5 and #6 here others as needed
..Step by Step to fix your Mac
Most commonly used backup methods

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Message was edited by: Diavonex

I need help importing navigation bars and rollover buttons from fireworks?

I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
Thanks

In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O.

IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE TH

My Firefox crashed with important information on it!!!
My Firefox has been crashing every day sometimes several times a day. I have emailed your staff back many times looking for a reason for the crashed without any response. I have been able to get by because I would restore the settings and continue what I was doing. WELL….this last crash has disappeared from any way of getting it back and IT HAD SOME REALLY REALLY IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE THAT OPEN WINDOWS FOR ME. IT IS REALLY IMPORTANT!! I NEED SOME DESPERATE HELP NOW!!
Thanks,
Nick

Nick, sorry to hear about that. I'm not sure where you are sending the emails, but if you use the form to submit your crash information, that goes into a database for review by the developers instead of coming to the support volunteers here.
Did you try the History > Restore Previous Session command? Firefox sometimes saves form data in the session history. This data may age out, so you should use that menu item as soon as possible.
Going forward, consider installing the [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/ Lazarus: Form Recovery] extension if you are filling long forms and Firefox is unstable.
With respect to the crashes, there are many possible reasons for Firefox to crash. Have you reviewed the help articles for diagnosis? For example: [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]].

Basic Output program need some help...Please

import java.io.*;
class FileOutputDemo
public static void main(String args[])
int one=1, two=2, three=3;
     FileOutputStream out; // declare a file output object
     PrintStream p; // declare a print stream object
     try
          // Create a new file output stream
          // connected to "myfile.html"
          out = new FileOutputStream("myfile.html");
          // Connect print stream to the output stream
          p = new PrintStream( out );
          p.printf ("This is written to a file %d", one);
          p.close();
     catch (Exception e)
          System.err.println ("Error writing to file");
}Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
I have a list of integer values like 1, 2, 3, 4? 10
And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
This is written to a file 1
This is written to a file 2
This is written to a file3 ?etc
Also this substitution has to be outputted to a new file every time.
Thank you very much in advance for your kind help
if i have to post this anywhere else please advise me..
Adam

import java.io.*;
public class FileOutputDemo
    public static void main(String[] args) {
         FileOutputStream out; // declare a file output object
         PrintStream p; // declare a print stream object
         try
              // Create a new file output stream
              // connected to "myfile.html"
              out = new FileOutputStream("myfile.html");
              p = new PrintStream( out );
              int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
            for (int element : arrayOfInts)
                 p.printf (element + " ");
              p.close();
              // Connect print stream to the output stream
         catch (Exception e)
              System.err.println ("Error writing to file");
}ok .... guys i really understand what do you mean,
i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
Thanks

Need some help with a program Please.

Well, im new here, im new to java, so i need your help, i have to make a connect four program, my brother "Kind of" helped me and did a program for me, but the problem is i cant use some of those commands in the program and i have to replace them with what ive learned, so i will post the program and i will need your help to modify it for me.
and for these programs, also i want help for:
They have errors and i cant fix'em
the commands that i've leaned:
If statements, for loops, while loops,do while, strings, math classes, swithc statement, else if,logical operators,methods, one and two dimensional arrays.
Thanx in advance,
truegunner
// Fhourstones 3.0 Board Logic
// Copyright 2000-2004 John Tromp
import java.io.*;
class Connect4 {
static long color[]; // black and white bitboard
static final int WIDTH = 7;
static final int HEIGHT = 6;
// bitmask corresponds to board as follows in 7x6 case:
// . . . . . . . TOP
// 5 12 19 26 33 40 47
// 4 11 18 25 32 39 46
// 3 10 17 24 31 38 45
// 2 9 16 23 30 37 44
// 1 8 15 22 29 36 43
// 0 7 14 21 28 35 42 BOTTOM
static final int H1 = HEIGHT+1;
static final int H2 = HEIGHT+2;
static final int SIZE = HEIGHT*WIDTH;
static final int SIZE1 = H1*WIDTH;
static final long ALL1 = (1L<<SIZE1)-1L; // assumes SIZE1 < 63
static final int COL1 = (1<<H1)-1;
static final long BOTTOM = ALL1 / COL1; // has bits i*H1 set
static final long TOP = BOTTOM << HEIGHT;
int moves[],nplies;
byte height[]; // holds bit index of lowest free square
public Connect4()
color = new long[2];
height = new byte[WIDTH];
moves = new int[SIZE];
reset();
void reset()
nplies = 0;
color[0] = color[1] = 0L;
for (int i=0; i<WIDTH; i++)
height[i] = (byte)(H1*i);
public long positioncode()
return 2*color[0] + color[1] + BOTTOM;
// color[0] + color[1] + BOTTOM forms bitmap of heights
// so that positioncode() is a complete board encoding
public String toString()
StringBuffer buf = new StringBuffer();
for (int i=0; i<nplies; i++)
buf.append(1+moves);
buf.append("\n");
for (int w=0; w<WIDTH; w++)
buf.append(" "+(w+1));
buf.append("\n");
for (int h=HEIGHT-1; h>=0; h--) {
for (int w=h; w<SIZE1; w+=H1) {
long mask = 1L<<w;
buf.append((color[0]&mask)!= 0 ? " @" :
(color[1]&mask)!= 0 ? " 0" : " .");
buf.append("\n");
if (haswon(color[0]))
buf.append("@ won\n");
if (haswon(color[1]))
buf.append("O won\n");
return buf.toString();
// return whether columns col has room
final boolean isplayable(int col)
return islegal(color[nplies&1] | (1L << height[col]));
// return whether newboard lacks overflowing column
final boolean islegal(long newboard)
return (newboard & TOP) == 0;
// return whether newboard is legal and includes a win
final boolean islegalhaswon(long newboard)
return islegal(newboard) && haswon(newboard);
// return whether newboard includes a win
final boolean haswon(long newboard)
long y = newboard & (newboard>>HEIGHT);
if ((y & (y >> 2*HEIGHT)) != 0) // check diagonal \
return true;
y = newboard & (newboard>>H1);
if ((y & (y >> 2*H1)) != 0) // check horizontal -
return true;
y = newboard & (newboard>>H2); // check diagonal /
if ((y & (y >> 2*H2)) != 0)
return true;
y = newboard & (newboard>>1); // check vertical |
return (y & (y >> 2)) != 0;
void backmove()
int n;
n = moves[--nplies];
color[nplies&1] ^= 1L<<--height[n];
void makemove(int n)
color[nplies&1] ^= 1L<<height[n]++;
moves[nplies++] = n;
public static void main(String argv[])
Connect4 c4;
String line;
int col=0, i, result;
long nodes, msecs;
c4 = new Connect4();
c4.reset();
BufferedReader dis = new BufferedReader(new InputStreamReader(System.in));
for (;;) {
System.out.println("position " + c4.positioncode() + " after moves " + c4 + "enter move(s):");
try {
line = dis.readLine();
} catch (IOException e) {
System.out.println(e);
System.exit(0);
return;
if (line == null)
break;
for (i=0; i < line.length(); i++) {
col = line.charAt(i) - '1';
if (col >= 0 && col < WIDTH && c4.isplayable(col))
c4.makemove(col);
By the way im using Ready to program for the programming.

You can't really believe that his brother did this
for him...I did miss that copyright line at the beginning when
I first looked it over, but you know, if it had been
his brother, I'd be kinda impressed. This wasn't a
25 line program. It actually would have required
SOME thought. I doubt my brother woulda done that
for me (notwithstanding the fact that I wouldn't need
help for that program, and my brother isn't a
programmer).I originally missed the comments at the top but when I saw the complexity of what was written then I knew that it was too advanced for a beginner and I relooked through the code and saw the comments.

I need 'Advanced Help' !important!

Similar Messages

Maybe you are looking for