I need all the drivers for HP 15-R074TU windows 7 32 bit
Please help me to find all the drivers for HP 15-R074TU notebook's windows 7 32 bit and any reference site where I can find if any driver or software is missing for my notebook.
Hi:
You should be able to use all of the W7 32 bit drivers and software from the HP Probook 450 g2.
Your model uses the Intel HD graphics driver.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=6943828&spf_p...
Similar Messages
-
I need all the drivers for Hp15 r007tx windows 7 32 bit
Dear Team,
I have purchased hp 15 r007tx and need all the drivers for it. I have installed windows 7 32 bit on it.Plz give me the link.
This question was solved.
View Solution.The above images are the sample of error message that i get once i update windows 7 or i reboot after installing a driver. The images are only sample not the actual error messages.
-
hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA
Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
On some models you need set Factory defaults to USER and turn on the RS-232.
Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
You must get this working before continuing.
You can set the COM port parameters by right clicking and selecting Properties.
(On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
On the left side, click on Devices and Hardware.
Click on Serial and Parallel.
Go to the COM port you found in Device Manager.
Open a VISA Test Panel.
Now I don't have one I can look at right now, so this is general idea:
Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
Go to the (I think) Input Output tab (you want to send a command)
The command string input should already have a *IDN? entered, if not, type it in.
Click on the Query button to send the command and check the response.
If you get an ID string back (Company name, Model, FW Version ...) then it works.
(Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?
No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use. -
Need all the drivers and cannot change the brightness with keys
my product name is hp 15-r250tu notebook i brought it a few days back all and the os i am useing is windows 7 ultimate all the drivers need to be installed but are not available on hp.com dont know why ? and i am not able to change the brightness with keys and cannot play games or videos video card off
Hello,
please have a look there: Adobe ID, sign in, and account help. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter -
Cant find all the drivers for windows 7 (32bit) will changeing to windows 8.1 help
i recently posted for drivers of hp 15-r250TU notebook with os windows 7 (32bit) to wich you replyd and some of the drivers were available and some were not . i wonder now if i switch to windows 8.1 then will i be able to have all the drivers from hp.com
Here is you drivers page, they all appear to be there. http://support.hp.com/us-en/drivers/selfservice/HP-15-r200-Notebook-PC-series/7486447/model/7748035#Z7_3054ICK0KGTE30AQO5O3KA30R1
-
Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.
Sorry my bad english..
See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad -
How can I capture and take screenshots of all the browser tabs and not only windows ?
This class identifies all minimized windows and take a snapshot (screenshot) of them. I want to take screenshots also of all the broswer for example chrome tabs windows that are open but not in the front. Same idea that it get now the minimized windows but
to get the screenshots of the broswer opened tabs ! What should I change in the WindowSnap class? Since both classes are a bit long I added them to pastebin.com
What i'm doing now is to get all the minimized windows i mean all the the windows in the back if it's chrome browser windows or open tabs if it's program games other windows. This is what i'm doing in form1 constructor:
this.listBoxSnap.Items.AddRange(WindowSnap.GetAllWindows(true, true).ToArray());
int numitems = this.listBoxSnap.Items.Count;
for (int i = listBoxSnap.Items.Count - 1; i >= 0; i--)
string tt = listBoxSnap.Items[i].ToString();
if (tt.Contains(" ,"))
listBoxSnap.Items.RemoveAt(i);
listBoxSnap is just a regular listBox1 in my form1 designer.
And this is the WindowSnap class code, it's a bit long code but it's all connected:
I'm not sure what to show here from this class what is the most important part so i added all the class code to a link to pastebin.com:
WindowSnap.cs
What i'm calling/using in form1 constructor from this WindowSnap.cs class is the GetAllWaindows method:
public static WindowSnapCollection GetAllWindows(bool minimized, bool specialCapturring)
windowSnaps = new WindowSnapCollection();
countMinimizedWindows = minimized;//set minimized flag capture
useSpecialCapturing = specialCapturring;//set specialcapturing flag
EnumWindowsCallbackHandler callback = new EnumWindowsCallbackHandler(EnumWindowsCallback);
EnumWindows(callback, IntPtr.Zero);
return new WindowSnapCollection(windowSnaps.ToArray(), true);
EnumWindowsCallBackHandler is:
private delegate bool EnumWindowsCallbackHandler(IntPtr hWnd, IntPtr lParam);
EnumWindows is:
[DllImport("user32.dll")]
[return: MarshalAs(UnmanagedType.Bool)]
private static extern bool EnumWindows(EnumWindowsCallbackHandler lpEnumFunc, IntPtr lParam);
Then i have the class called WindowSnapCollection:
WindowSnapCollection.cs
The problem is in form1 constructor i'm getting only 23-24 windows in the listBox1. When i'm doing this two lines:
this.listBoxSnap.Items.AddRange(WindowSnap.GetAllWindows(true, true).ToArray());
int numitems = this.listBoxSnap.Items.Count;
I see in numitems about 30 windows and after filtering i'm getting 20 windows and i checked that's the correct number of opened minmizied windows i have in this example 20.
Now what i want to do is somehow to get with all this windows in the listBox also all the opened tabs in chrome.
For exmaple i have only 4 opened chrome windows. But in one of the chrome windows i have almost 40 tabs opened !
I want somehow to add to the listBox all this opened tabs also as captured screenshots like i'm doing now with the windows.
This is a screenshot of my program showing what i'm doing and what i get:
So now i have 19 windows captured in the next refresh it will show 20.
My question is if there is any way to capture also all the chrome opened tabs in all the windows if any opened tabs are opened at all ? Now i'm getting only the chrome opened windows captured screenshot. But i want to get also the chrome tabs captured screenshots.Hi Chocolade1972,
Since this forum is discussing about Windows Forms general like winform controls, and your issue is related with Windows Desktop SDK, I will move this thread to the more related forum.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?
Support articles for things like this would be here:
http://www.apple.com/support/bootcamp -
First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.
Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here. -
My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller external drive?
50maz wrote:
Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in
Yes, it will do a full backup.
and if so, do I really need all the old backups on my smaller external drive?
Only if you want to be able to go back in time to those previous Time Machine backups. When you plug in the new larger external drive, you will only be able to go back as far as the first day you plugged it in and ran the first Time Machine backup on it. -
A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?
Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them
Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers. -
I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.
Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.
Maybe you are looking for
-
Are Distributed Forms created in Acrobat XI Pro compatible with Response Forms in Acrobat X Pro?
I want to be able to use distributed forms (created in Acrobat XI Pro) that I have received back through email with Acrobat X Pro. That is, I want to be able to import the form information that is being sent back to me into a response form in Acroba
-
Java and Display Issues in Plus
Hi everyone Please reply whether you have or have not seen any of the following: I'm working on a client site where we have some machines working just fine and others are giving corbaserver errors. Copying data from a worksheet into Excel using CTRL-
-
When I play back video, only audio plays back, and it shows the first frame of where i was playing back. When I stop it, the video jumps to the last frame that it passes. Please Help!!!
-
Multiple legal entities in one Request Set
Hi, I have a question that hopefully someone can help with. It will make life so much easier here! In our environment on 11.5.9, we have multiple legal entities each a separate set of books. We're trying to create a request set to run multiple financ
-
Set Validity period to internal catalogs.
Hi All, I am trying to assign a validity period for Internal catalog on the Supplier catalog CSV2 file. I have defined the characteristic Id as /CCM/VALID_TO and /CCM/VALID_FROM. I am unable to upload the supplier catalog. But if I remove this fields