I need an advice in full connectivity between IPV4-IPV6 network

Hi ,
i have a network topology as attached.
as you see it has both ipv4 & ipv6
i just need an ideas here about how let all pcs (ipv4 & ipv6) to talk together based on the topology attached.

Hello Ahmed,
You can use BGP with address-family ipv4 to provide routing for ipv4 and address-family ipv6 for ipv6.
This means between your router's you will have 2 BGP peerings, one for v4 one for v6.
If you use the ipv4 address for bgp address-family ipv6, you will have to apply a route-map on neighbor to change the next hop address to the relevant ipv6 interface address.
hth
Bilal
CCIE #45032

Similar Messages

Lose connection between computers on network through airport

Our connection between computers on network goes down every day or so. Connection to internet stays ok. We restablished computer connection by cycling airport extreme off and on again. Has been getting more frequent. Any suggestions or help? Faulty unit? Thanks.

As my magic crystal ball is on the shop for oil change, at the moment I'm not able to see your configuration or setup.
No info - no help

Need help in establishing the connection between BO federator and Oracle DB

Hi Experts,
I am working on BO federator and now I need to establish the connection between BO federator and the oracle db to use this as the source for the federator,
I know we need to download the respective oracle DB connect .jar file from the oracle web site and place it under the drivers section(folder) of the BO Federator.
Now I need to understand what is/are the next steps I need to follow and what are the values for the following parameters which are required during establishing the connectivity while creation of data sources from federator end.
Host Name:
Port:
SID:
Schema:
Please share the details, any help will be highly appreciated.
Thanks with regards,
Vinay

Hi,
Please find below details.
Host Name: Server Name or IP Address (Oracle)
Port: (oracle Server Port)
SID:SID is a unique name for an Oracle database instance. -> To switch between Oracle databases, users must specify the desired SID <-. The SID is included in the CONNECT DATA parts of the connect descriptors in a TNSNAMES.ORA file
Schema: no need to enter(Blank)
Thanks,
Amit

My WinXP needs the WEP key to connect to the AirPort network. Where do I g

I have a new iMac and Airport router. I have set up WEP on the airport and the iMac connects fine. The XP recognizes the airport network, but when I try to connect, it asks for the network key (wep key).
Where (how) do I get the encryption key?

I have a new iMac and Airport router. I have set up
WEP on the airport and the iMac connects fine. The
XP recognizes the airport network, but when I try to
connect, it asks for the network key (wep key).
Where (how) do I get the encryption key?
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Need Configuration example for DS-LITE ( Tunneling IPv4-IPv6)+NAT44.

Hi,
I need to understand DS-LITE with configuration example. Can anyone please help me out?
Regards,
RA

Hi Rahul,
DS-Lite is only supported on the CGSE in CRS and on the ISM in the ASR9k. Here is a sample config that might help you to understand.
RP/0/RSP0/CPU0:router(config)#
interface te0/0/0/0
ipv6 add 2001:db8:ff00::1/64
interface te0/1/0/0
ipv4 add 192.168.100.1/24
interface ServiceApp61
ipv6 address 2001:db8:1::1/64
service cgn demo service-type ds-lite
interface ServiceApp41
ipv4 address 192.168.1.1 255.255.255.252
service cgn demo service-type ds-lite
service cgn demo
service-type ds-lite dslite-1
map address-pool x.y.z.0/24
aftr-tunnel-endpoint-address 2001:db8:ffff::1
address-family ipv4
interface ServiceApp42
address-family ipv6
interface ServiceApp41
router static
address-family ipv4 unicast
x.y.z.0/24 ServiceApp42
address-family ipv6 unicast
2001:db8:ffff::1/128 ServiceApp41
regards

Need to establish Connection between CRM and   Virtual Directories.

Dear All,
I am working for Telecom project.
I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
This is existing in Access management system.( SAP EP environment )
The basic requirement is, with SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
Which is existing in Access management system .
   Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
Please let us know..Certainly there will be a reward points
Thanks & regards.
BNP

Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

Wireless connection between two macs.

I have a Intel iMac downstairs and a G4 power pc iMac upstairs. The downstairs iMac has an internet connection, upstairs does not. What do i need to have a wireless connection between the two and how do i go about connecting the two computers?

Hi widge-
What you need will depend on which Macs are already wireless and which you will have to add.
There is a lot more information available here: AirPort + Time Capsule
Luck-
-DP

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

Need some advice on the whole "Ill vs. Visio".

Long story short: Doctoral student (cancer cell biology) creating illustrations for my dissertation, manuscripts and posters for meetings. I am just starting so I have some options right now. So ran a test. Needed to make 2 illustrations for the first chapter of dissertation, did one in Illustrator CS3 (13.0.2) and one in Visio 2007. What I really want is Visillustrator CS2007. The "connection points" in Visio are the killer feature there, pretty much everything else is better in Illustrator (in fact I made some of the symbols I needed in Illustrator and then broght them into Visio). It's just those connections points make changes really easy but I layout all my stuff (manuscripts, posters, a dissertation) in InDesign. Using Illustrator makes for a nice workflow until my mentor wants to move things around on the illustration and then the issues begin with Illustrator.
Any advice, suggestions, musing? I need to pick one of them and go with it.
Thanks for your time,
Adrian.

What I really want is Visillustrator CS2007
Then try just about any mainstream drawing program other than Illustrator. Illustrator does not provide connector lines. It is "brain dead" when it comes to org charts, workflow charts, etc. You basically have to draw such things as individual objects and just deal with there being no live connectivity between them.
Much depends on the level of illustration work you are doing.
Assuming Windows (you didn't mention your platform):
If your drawing needs are modest (sounds like it) go to Sun microsystems and download OpenOffice.org. I actually find its drawing module less tedious to use for connector diagrams than Visio. It contains a full set of prebuilt diagram symbols and has a surprising amount of capability for that kind of program. Also exports to PDF.
If you need to create the org charts in a full-blown vector drawing environment, try Corel Draw. It includes connector lines (which can connect to specific path nodes, rather than only to bounding box handles). Canvas also provides connector lines. Both of those programs are more amenable to techish illustration than Illustrator, because they include dimensioning tools, custom ruler scales, connector lines, 2D extrudes, etc., etc.
JET

How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

Dear experts,
My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
I have some question below.
1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
2. Current Rack has LC type patch pannel from B-side to Rack A side.
But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
3. Old 6509 links use many MMF cable, and new Nexus use SMF.
Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
Please let me know in detail, Thanks in advance, I really appreciate for your help.
Jason.

Hi Leo,
Thanks of your reply.
Dear Experts,
I seek your expert's advice for another question urgently.
Please make you time and share your experiecce.
Thanks.
Jason

How to add connection between two Web Part Data Views in sharepoint designer 2013

Hi I have problems with connect two data view
I have a SQL server database named Mini
In Mini database I have two tables: dbo.Table_A and dbo.Table_B
Table_A design and Table_B design
In the internet browser it look like this after I add the connections, the problem is there is no connection when I click at the Blue link id 2 and 3 ??? John's and Jes's Lastname did not show up, the links is dead. that's my problem
The must strange is that, if I do the same below, in sharepoint 2010 designer it do well ?? so what in the .....
Here is my code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<%@ Page Language="C#" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="SharePoint" namespace="Microsoft.SharePoint.WebControls" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="WebPartPages" namespace="Microsoft.SharePoint.WebPartPages" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<html dir="ltr" xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta name="WebPartPageExpansion" content="full" />
<meta http-equiv="X-UA-Compatible" content="IE=10" />
<SharePoint:CssRegistration Name="default" runat="server"/>
</head>
<body>
<form id="form1" runat="server">
<table width="10%"><tr><td>
<WebPartPages:SPWebPartManager runat="server" id="SPWebPartManager">
<SPWebPartConnections>
<WebPartPages:spwebpartconnection ID="g_1660BB6ADC7243088A1BB7F5C196203A" ConsumerConnectionPointID="DFWP Filter Consumer ID" ConsumerID="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" ProviderConnectionPointID="DFWP Row Provider ID" ProviderID="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad">
<WebPartPages:sprowtoparameterstransformer ProviderFieldNames="@ID" ConsumerFieldNames="@ID" />
</WebPartPages:spwebpartconnection>
</SPWebPartConnections>
</WebPartPages:SPWebPartManager>
<asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_A on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{B70A05BB-A849-423D-8E53-C7AD9CCC18AD}" id="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_A_x0020_on_x0020_Mini2" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_A] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_curselkey" Location="Postback;Connection" DefaultValue="##init##"/>
</ParameterBindings>
<datafields>@ID,ID;@ForeName,ForeName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_curselkey">##init##</xsl:param>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">ForeName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="CurrentRowKey">
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" >
<xsl:with-param name="CurrentRowKey" select="$CurrentRowKey" />
</xsl:call-template>
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<xsl:param name="CurrentRowKey" />
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<a target="_self">
<xsl:attribute xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="href">
<xsl:variable name="cursel">dvt_curselkey={
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
}</xsl:variable>
<xsl:variable xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="fields">@ID=<xsl:value-of select="ddwrt:ConnEncode(string(@ID))" /></xsl:variable>
<xsl:text>javascript:</xsl:text>
<xsl:value-of select="ddwrt:GenFireConnection(concat('g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881*',$fields),string($cursel))"></xsl:value-of>
</xsl:attribute>
<xsl:attribute name="style">
<xsl:if test="$CurrentRowKey = $dvt_curselkey">font-weight: bold;</xsl:if>
</xsl:attribute>
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')" />
</a></td><td class="ms-vb">
<xsl:value-of select="@ForeName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
<xsl:template name="dvt.gencurselkey">
<xsl:param name="RowPath" />
<xsl:choose>
<xsl:when test="$dvt_curselkey = '##init##' and position() = $dvt_firstrow">##init##</xsl:when>
<xsl:otherwise><xsl:value-of select="ddwrt:ConnEncode(string($RowPath/@ID))" /></xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr><tr><td>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_B on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{2ABFC8F5-0EB3-4711-A5B0-7E7518F56881}" id="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_B_x0020_on_x0020_Mini1" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_B] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
</ParameterBindings>
<datafields>@ID,ID;@LastName,LastName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">LastName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" />
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')"/>
</td><td class="ms-vb">
<xsl:value-of select="@LastName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr></table>
</form>
</body>
</html>

Hey Bale
Yes I use sharepoint designer 2013, when I do the same in sharepoint designer 2010, it do well
No to your question 2, 3 and 4
See again my picture below her, when I open the internet browser
in the database you have a table with forename and another table with last name,
the link between this two table is the id, when I open it is ok, Bens lastname is
James, Ben James.
So when I try to click on the blue id number 2 beside John, Johns Last name
should show up, but it did not, the link is dead. that's my problem the funny about this when I
do the same procedure see above in sharepoint designer 2010, it do well ?
Here is my first steps, when you have uploaded the first datasource, you need to save, place your courser
behind the <asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager> x PLACE COURSER HER
THEN you can upload the next datasource, the sharepoint designer automatic generate the code for the grid.
When you have the two grids inside the aspx file, place your courser behind the first
<WebPartPages:DataFormWebPart X <---
then the tab "option" show up and inside here you can add the connections between the two grids.

Novice trying to connect between office and home MACs

Advice for system novice
trying to connect between office and home MACs
Office MAC OSX 10.2.8 (also runs classic mode)
G4 Computer in the office (only mac in office all others are PC)
I need to connect home computer
IMAC OSX 10.4 Tiger. Connecting via cable modem and have router
I do not have good networking skills, i this something that is doable myself or should I call in a pro?

It's doable.
But at home you need to find the "outside" IP that the Internet sees, not the one you see on that machine.
what's my ip...
http://www.whatsmyip.org/
Then you'll need to "Forward Ports" on the home router so incoming stuff knows where to go.
Then you'll need to enable the Services you wish to use on both machines.

Live/realtime connection between WebI and Xcelsius

Hi,
is it possible to have some kind of a live connection between WebI and Xcelsius for the following scenario...
I need to have my WebI report made availabe as an Xcelsius Dashboard and when I filter a value in the dashboard it should also get filtered in the WebI report. Is this possible and if so then how?
Pls help.
Thanks,
SD
Edited by: Sebastian D'Souza on Feb 22, 2011 11:39 AM

Hi Sebastian,
Yes this is very possible. Of the three connection methods (QaaWS, Live Office, BI Services) I would recommend BI Services for flexibility, speed to set up, and speed for query refresh times.
Check out this post for a step-by-step guide http://blog.davidg.com.au/2011/03/drill-down-in-xcelsius-using-bi.html
And refer to the Webi Rich Client guide in the section "Sharing Web Intelligence content with other Web applications" for the full details of how this works.
Hope this helps.

Connection between lightweight access point and switch?

Hello everybody,
I am a bit confused about cisco 1000 series access point connection. On wireless lan controller and lightweight access point basic configuration example document id 69719 (http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml), I understood the access point has two vlans associated with (vlan 3 and 4). Am I correct?
Why is connection between access point and catalyst port just access port rather 802.1q trunk? How vlan traffic can traverse from the access point to controller?
Please advice.
Many thanks,
Nitass

Nitass,
The AP itself does not need to be a trunked port, but the uplink to the controller does. When using a Lightweight enviroment, all the traffic passes thru an encrypted LWAPP tunnel from the AP to the controller, and then gets sent out the correct VLAN interface on the controller.

I need an advice in full connectivity between IPV4-IPV6 network

Similar Messages

Maybe you are looking for