I need an encrypt a xml settings file.

Hey all,
I'm new to this post, so bare with me.
I have a XML file that has some setting of the program,
and also user name and password to a database.
hence i would like to encrypt this file, so no one can read the user name and password.
so my question is what should i use?
and do
any help will be greatly appreciated.
thanks

so user name and password to a database.
>
hence i would like to encrypt this file, so no one
can read the user name and password.
so my question is what should i use?
and do
You need to re-think your design. One cannot securely encrypt the XML file because your program must be able to decrypt it so it must contain the key needed for the decryption. The key can therefor be extracted by any half competent hacker.

Similar Messages

Help needed in encrypting and decrypting a file

Hello,
I just started looking into the Java Security.I need to encrypt a file using any popular alogrithm like RSA or DES and write it to disk.and again decrypt this file at a later time when needed.
I was checking out with different ways of doing so,but found it difficult to persist the key some where.
Could some one help me in this regard,with a tutorial or a sample program where I will be able to give cleartext file as an input and get a ciphered text file as output and vice versa?

Probably the simplest solution is to use password-based encryption (PBE). See http://java.sun.com/j2se/1.5.0/docs/guide/security/CryptoSpec.html#PBEEx
for an example.

Need help with reading XML using File Adapter

I have created a simple BPEL process that uses a file adapter to read files containing XML messages of a simple xsd schema. But when reading the xml, I get the following error message:
[2010/03/01 23:43:13] Invalid data: The value for variable "Receive_1_Read_InputVariable", part "revision-report" does not match the schema definition for this part.The invalid xml document is shown below: More...
[2010/03/01 23:43:13] "{http://schemas.oracle.com/bpel/extension}invalidVariables" has been thrown. less
-<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>
9710
</code>
</part>
-<part name="summary">
<summary>
Invalid xml document.
According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.4: Attribute 'doc' must appear on element 'revision-report'.
Error::cvc-complex-type.4: Attribute 'model' must appear on element 'revision-report'.
Error::cvc-complex-type.4: Attribute 'pubdate' must appear on element 'revision-report'.
Error::cvc-complex-type.2.4.b: The content of element 'revision-report' is not complete. One of '{"http://xmlns.oracle.com/xmlfile":alternategroup}' is expected.
Please make sure that the xml document is valid against your schemas.
</summary>
</part>
</invalidVariables>
It seems that there is some issue with the namespace, but even after trying out various combinations, I am not able to resolve this.
Here the message schema (xsd):
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/xmlfile"
xmlns:tns="http://xmlns.oracle.com/xmlfile"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="revision-report">
<xs:complexType>
<xs:sequence maxOccurs="unbounded">
<xs:element name="alternategroup">
<xs:complexType>
<xs:attribute name="name" use="required" type="xs:string"/>
<xs:attribute name="Desc" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="doc" use="required" type="xs:string"/>
<xs:attribute name="model" use="required" type="xs:string"/>
<xs:attribute name="pubdate" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:schema>
And here is the xml file to be read by the file adapter:
<?xml version="1.0" encoding="UTF-8" ?>
<revision-report doc="doc2" model="model4" pubdate="pubdate5">
<alternategroup Name="ABC" Desc="ABC-Desc">
</alternategroup>
<alternategroup Name="DEF" Desc="DEF-Desc">
</alternategroup>
<alternategroup Name="GHI" Desc="GHI-Desc">
</alternategroup>
</revision-report>
Appreciate any help.
Thanks in advance for your attention.
Jay

Thanks for your response.
I am not sure if there is any easier way, but I tried out the following tool available on the net to check an xml against a xsd:
http://tools.decisionsoft.com/schemaValidate/
There were a few issues, that I corrected and finally had a xsd and xml that were matching and valid. I tried this out in my file reading BPEL process, but the error still remained the same!
Here is my updated/simplified xsd and xml:
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema targetNamespace="http://xmlns.oracle.com/xmlfile"
xmlns:tns="http://xmlns.oracle.com/xmlfile"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://xmlns.oracle.com/xmlfile">
<xs:element name="revision-report">
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs="unbounded" ref="alternategroup"/>
</xs:sequence>
<xs:attribute name="doc" use="required" type="xs:string"/>
<xs:attribute name="model" use="required" type="xs:string"/>
<xs:attribute name="pubdate" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="alternategroup">
<xs:complexType>
<xs:attribute name="Name" use="required" type="xs:string"/>
<xs:attribute name="Desc" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:schema>
<?xml version="1.0" encoding="UTF-8" ?>
<revision-report doc="doc2" model="model4" pubdate="pubdate5" xmlns="http://xmlns.oracle.com/xmlfile">
<alternategroup Name="ABC" Desc="ABC-Desc"/>
<alternategroup Name="DEF" Desc="DEF-Desc"/>
<alternategroup Name="GHI" Desc="GHI-Desc"/>
</revision-report>
I even tried the option that is available in JDeveloper to generate a sample xml from a xsd (when in the context of a Transformation activity). The xml generated by this also seems exactly like the one above.
So, I am not able to figure out why my BPEL process errors out with the message Invalid xml document.

How to Edit a XML data file from AS3 class...

Hi...
 I need to edit an XML data file I have at the exit of application.... I have a demo code which is not working....
This is the code :
public function UpdateData():void
 trace("Closing....");
 var FileData:XML=<Hello>Hai</Hello>
 var urlLdr:URLLoader = new URLLoader();
 var urlRqst:URLRequest = new URLRequest ("AppData.xml");
 urlRqst.data=FileData;
 urlRqst.contentType = "text/xml";
 urlRqst.method = URLRequestMethod.POST;
 urlLdr.load(urlRqst);
This AppData file already exist and has some data in it.
 Plus :
 How to find the application is exiting.

use: fscommand('Quit');
to exit your app.
and this is how you would use the urlloader class to save data:
public function UpdateData():void
 trace("Closing....");
 var FileData:XML=<Hello>Hai</Hello>
var urlVar:URLVariables=new URLVariables();
urlVar.fileData=FileData;
 var urlLdr:URLLoader = new URLLoader();
 var urlRqst:URLRequest = new URLRequest ("this must be an executable to parse and write data");
 urlRqst.data=urlVar;
 urlRqst.contentType = "text/xml";
 urlRqst.method = URLRequestMethod.POST;
 urlLdr.load(urlRqst);
but i don't think you can use an executable on a fl4 device so you will need to use a different class. i don' know how you're storing an xml file on a fl4 device but you should be able to use the sharedobject to read and store xml.

How to generate an XML Configuration File for EBS Source Type

Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
Thanks

Hi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan

About the exporting and importing xml data file in the pdf form

Hi all,
I need help for importing xml data file in the pdf form. When I write some thing in the text field with fill color and typeface (font) and exported xml data using email button. When I imported that xml file in the same pdf file that is used for exporting the xml data then all the data are shown in the control but not color and font typeface. Anyone has suggestion for solving this problem. Please help me for solving this problem.
Thank you
Saroj Neupane

Can you post a sample form and data to [email protected] and I will have a look.

Loading XML Configuration File into Java

I have a stored procedure wrapper to a Java method (within a jar file) that has been loaded into the database. I need to load an XML configuration file in this method and parse it but get the following error.
<Line 2, Column 192>: XML-24538: (Error) Can not find definition for element 'LODConfigs'
When I run the method standalone through netbeans it parses fine and is able to load the file. I've confirmed that it is able to read the file but I am lost as to what could be the problem. Any suggestions would be welcome.
The header of the file is
<?xml version="1.0" encoding="UTF-8" ?>
<LODConfigs xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/spatial/network/lodLODConfigs.xsd"
xmlns="http://xmlns.oracle.com/spatial/network">
<LODConfig globalNetworkName="$DEFAULT$" networkName="$DEFAULT$">
<networkIO>
</networkIO>
</LODConfig>
</LODConfigs>

Just a guess really, (and this is an old question now - so you may have moved on).. is your XML parser attempting to use the schema location to pull the XML schema from the internet?
If so, that might run fine in netbeans, but hit java permission limits in Oracle. Have you tried running it in netbeans with the network cable unplugged.
If that fails with the same error as the Oracle JVM, that might give a clue as to the problem and you can troubleshoot the permissions from there.

Error while encrypting the xml file using asymmetric cipher...pls help

i am encryption the xml file using asymmetric cyper....
in one class , i am generating private key and public key using "RSA" algorithm..using 1024 byte initialization...
it is generating properly...
and after that in second class i am encrypting the xml file using "DESede" algorithm and i am using public key of above class..
but i am getting exceptione :
java.security.InvalidKeyException: Invalid key length: 162 bytes
at com.sun.crypto.provider.DESedeCipher.engineGetKeySize(DashoA6275)
at javax.crypto.Cipher.init(DashoA6275)
at XmlEncryption.getEncryptedData(XmlEncryption.java:147)
at XmlEncryption.encryptCompleteXmlFile(XmlEncryption.java:123)
at demoXmlEncApp.simulateBookSellersEnd(demoXmlEncApp.java:72)
at demoXmlEncApp.main(demoXmlEncApp.java:29)
so, what is that ?
i want to use RSA algo for key generatiion and DESede for cipher initialization .
is there any site for where source code of xml file encryption using asymmetric cipher is available?
pls, help me.....

Sachin,
What sabre150 is trying to explain to you, is that encrypting data (such as an XML file) is a 2-step process. In the first step, you generate a symmetric key (such as DES, 3DES, AES) and encrypt your file with this key (and the appropriate mode and padding).
In order to ensure that your encrypted data cannot be decrypted by unauthorized individuals, you now need to protect the symmetric key. Encrypting your symmetric key with another symmetric key does not solve the problem, since you have a chain of symmetric keys that need to be encrypted into infinity.
Cryptographers solve this problem by encrypting the symmetric key with an asymmetric key, such as as RSA. To perform this second step, you generate an RSA key-pair, encrypt the symmetric key you generated in step 1 with the Public key of the RSA key-pair, and give the recipient of the encrypted XML file, access to the Private key of the RSA key-pair as well as the encrypted symmetric key.
The recipient, then uses the RSA Private key to decrypt the symmetric key first, and then uses the "plaintext" symmetric key to decrypt the XML file.
What sabre150 was also attempting to explain to you, is the traditional way of transporting an encrypted "blob" that consists of data + symmetric key. With a modern key-management system, combining the two would be unnecessary.

Encrypting an XML file data

Hi All
I am new to Java security. I am stuck where i need to write the handler for the webservice.
I need to encrypt/sign the XML data using the some certificate.
I am having the certificate (pfx) and JKS file with me which i got from the web service producer.
Could some one let me know how can i encrypt this XML with above certificate.
Please let me know if you need some more information.
Thanks
Navneet

Navneet_Nigam wrote:
In the means while could you please answer my one question what is the differecne between sign the xml and encrypting the xml.Sign - to indicate that the XML has not be tampered with.
Encrypt - to hide the content from prying eyes.
I want XMl to be signed and encryptedOK.
If you are serious about doing this work then you should learn a good bit more about cryptography. A good starting point is
"Beginning Cryptography with Java" written by David Hook and published by Wrox.

Need Jsp file to parse xml dom file

Hai SDN member,
I am new to jsp. I am having one xml dom file with follwing content,
My XMLDOM file
<root>
<dir>
<dirname>Mydir1</dirname>
<file>
<filename>f1</filename>
</file>
<file>
<filename>f2</filename>
</file>
<dir>
<dirname>mydir2</dirname>
<file>
<filename>f1</filename>
</file>
</dir>
</dir>
</root>
This is my XML dom file. I need a sample jsp file which shoule parse the above content.
Pls help me

JSTL has an <x:parse> element, doesn't it? At any rate "I need JSP code" sounds very much like a JSP question to me. There's a JSP forum.

The XML data file - I need to add an XSL reference line

Help Appreciated !! Using Lifecycle 8, with out Reader Extensions, the email submit button generates an XML output file such as the following; <?xml version="1.0" encoding="UTF-8"?> <FormName> <Position>thwrth</Position> <Division>arthar</Division> <DepartmentUnit>rthqrth</DepartmentUnit> </FormName> How can I get the following reference included as line 2 of the output xml file ? <?xml-stylesheet type="text/xsl" href="SR.xsl"?> Thanks a lot

If I understand correctly, Sonic Kaboom.swf needs to be edited in a separate Flash authoring program and then reinserted into your HTML document.
As Murray said, Flash is dead. Nobody uses it anymore. We use HTML5, CSS3 and JavaScript animations which have universal support from Smartphones, Tablets and other web devices that can't support Flash. Look at Edge Animate.
HTML animation | Download free Adobe Edge Animate CC trial
Nancy O.

Need HELP!! Where I have to place an web.xml(servlet) file on server

I'm using E-business suite for oracle HR version 11.
On localhost i have developed an servlet file with using web.xml. On web.xml i have customized the file that can load a class for my servlet.But when I deploy on the server i had a cnfused wher do i have to place web.xml and my servlet.
I have made an servlet file for my custom. Where do I have to place an xml(servlet) file on server?
Would you give me know forsolving my problem.Please give me know,I really appreciated if you want to give some solution.
Regards,
Dany Fauzi

Copy web.xml to WEB-INF directory of the web application.

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
 ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
 <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
 <config-property name="dataSourceName" value=""/>
 <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
 <config-property name="usesNativeSequencing" value="true"/>
 <config-property name="sequencePreallocationSize" value="50"/>
 <config-property name="defaultNChar" value="false"/>
 <config-property name="usesBatchWriting" value="true"/>
 <connection-pooling use="none">
 </connection-pooling>
 <security-config use="none">
 </security-config>
 </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
 ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

How to change the colors in Keynote 6.1 globally using the xml presentation file?

Hi ,
When I used keynote 5.3 in the "show package contents" I could find an Index.apxl.gz file. With that XML like file, I changed the color of a scheme globaly by replacing the color that I had with another one. However in new Keynote 6.1 there is no such Index.apxl file. There are a bunch of binary .iwa files that are unreadable and of course of no use to us.
Anyone has solved this problem? Its really bad, and slowing my work down like a lot :/
I wonder what kind of developers thought of this "amazing" change from XML to IWA (whatever that is)....
Anyway thanks a lot!

Hello Gary,
I'm having the same problem as mshefiti, and I don't think that using a Custom Theme could be the solution, at least I could not see it.
What we need is the possibility of replacing a specific colour through the all presentation instead of having to go through each single element in each slide that is a lot time consuming. Basically what you can do when you tie a color scheme into the theme colors in PowerPoint.
With the theme, as far as I know, you can have specific color and settings for the titles, the text, the background etc, but not on the single elements you put in the slides, like icons, graphs etc.
May be I'm missing something in the potential of the Custom Theme, or I'm not using it properly, if that's the case can you give a link to a tutorial that explain that ?
Thanks

Urgent: UWL XML Config file

Hi all!
I copied the business object EXTSRV to ZEXTSRV and created a new method zprocess that is mainly a copy of the Process method of the EXTSRV BO just that the creation part of the url is diffirent. I kept the call_browser function.
Then, I assigned this method to a task in the workflow this task is copy of the standard task TS50000075. I added the itemtype to the UWL XML config file and uploaded it to the system successfuly then i cleared the cash.
When i double click on the item in the UWL it partially works. I see the text written in the task but it is supposed to pop up a window. This window doesn't appear.
Can anyone help with that?
Thank you in advance,
Hajar

Hi
Just check this out Please do not forget to give points
User Roles Restricts who can get work items via the user role. For example, you can assign a portal role here, such as buyer. Only users with the role buyer will see items from the provider system in UWL.You can have multiple user roles separated by semi-colon. By specifying user roles for the portal users, it can be restricted as to who gets the work items in UWL. For example, you can assign a portal role to a user, such as buyer. Only users with the role buyer will see items from a system, for example, B7QCLNT000 in UWL.
Pull Channel Delta Refresh Period (in Seconds) Delta Pull mechanism of UWL enables new items to be fetched from the back end SAP systems every minute by default every 60 seconds, and every 30 seconds for alerts. However, this can be configured. The user does not need to use the refresh function to update the inbox. Once items are retrieved, timestamps are updated for the users whose items are successfully retrieved. These retrieved items are updated in the UWL cache. Setup necessary from Business Workflow to enable Delta Pull MechanismSome configuration settings are required if you use the UWL and the Extended Notifications for SAP Business Workflow. Define the following two batch jobs:...● Background job (for example UWL_DELTA_PULL_1), consisting of a single step of ABAP report RSWNUWLSEL in FULL mode, using a report variant.Run the job once a day.1. ● A background job (for example UWL_DELTA_PULL_2), consisting of a single step of ABAP report RSWNUWLSEL in DELTA mode (default mode is delta, so report variant is optional).Run the job every one to three minutes (depending on the performance of the back end SAP system).Setup necessary from UWL to enable Delta Pull Mechanism The UWL service user in portal, with user id uwl_service, has to be granted access to the corresponding back end systems. This is a predefined service user provided by UWL. When the back end system is configured in the UWL administration page, an automated process is triggered to create a corresponding UWL service user in the back end system.Check role assignments and profiles status of this automated generated UWL service user and perform user comparison if necessary.● If SAPLogon ticket is used (without using user mapping), you first create the system entry. A message about uwl_service user appears. Then in the back-end system give the uwl_service user an initial password. Now edit the system entry.● If user mapping is used, you can first configure the back end system in the UWL administration page. Then access the respective back end system to initialize the password for the user uwl_service. Then, do user mapping in the portal as usual for service user uwl_service.In case uwl_service fails to be created in the back end and does not exist, you can manually create a back end user with the id uwl_service and assign the role SAP_BC_UWL_SERVICE and the rights as other end users.ORMap uwl_service to an existing back end user. Make sure that there is no multiple user mapping (there must not be two portal users mapped to the same back end user). This back end user must have the role SAP_BC_UWL_SERVICE.
Snapshot Refresh Period (in minutes) All items at the current time are fetched from the backend (for example from the SAP Business Workflow). The cache is synchronized thereafter. New / modified / deleted / updated items are fetched every session (every log on) if you leave the field value empty or enter a negative number.To specify a particular time frame for which the refresh occurs, enter the number of minutes
The above registration procedure is usually sufficient to use a UWL iView. Item type retrieval and registration requires a connection to the systems and may take a couple of minutes.
For each system, they are generated as the configuration named uwl.webflow.<system_alias> or uwl.alert.<system_alias>.
In Manager Self-Service (MSS), the Universal Worklist groups together in Workset: Work
Overview the various workflow tasks and alerts that are relevant for a manager.
The standard MSS delivery includes the configuration file com.sap.pct.erp.mss.001.xml for the universal worklist.
1. In the portal, choose System Administration →System Configuration →Universal
Worklist and Workflow →Universal Worklist →UWL Systems Configuration.
2. Create the following system connections:
If you have already registered a suitable connector to the system connected to
the system alias, the existing connector is sufficient and you do not have to
register an additional one.
○ System alias: SAP_ECC_Financials
Connection types:
■ WebFlowConnector
■ AlertConnector
○ System alias: SAP_ECC_HumanResources
Connection type WebFlowConnector
○ System alias: SAP_SRM
Connection type WebFlowConnector
Leave the Web Dynpro Launch System field blank for all system connections.
with regards
subrato

I need an encrypt a xml settings file.

Similar Messages

Maybe you are looking for