I need an information about the Language in the Product Download Section

Hi,
I would like to ask the developers team to look into this. There are many indians using this product (You would have the count..) When you guys have included all other national languages, Why is that you have not included Hindi (The Indian National Language). Please consider this as a request and try building a Language File for Hindi.
Thanks and Regards,
Vivek Sampath

Thunderbird is a community project, so if your up for it you can undertake the Hindi translation or help form a team of volunteers to do it.
Perhaps you could join the localization team https://wiki.mozilla.org/L10n:Teams:hi-IN and work with them to see a Thunderbird translation released.

Similar Messages

Hello please i need some information about the blackberr...

hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alot

Hello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT5025 I need an information about the voiceover utility. In Israel the Iphone comes with the VoiceOver/Siri in hebrew? Would be possible to a blind israeli use the Iphone? How?

I need an information about VoiceOver/Siri in hebrew...
Would be possible to a blind israeli use the Iphone? How?
I ask you because the VoiceOver is not translated to hebrew...

If what you are asking is whether additional languages can be added to iPhone Voiceover, the answer is "no".
You can ask Apple to add Hebrew via
http://www.apple.com/feedback/iphone.html

Make information about the current user available in a managed bean

I've overridden prepareSession in an Application Module (AM) so that when a user logs into my application, it immediately uses the username as a bind variable to execute the query for a View Object (VO) that gets more information about the user, like full name, e-mail address ... This works fine and I'm able to bind the VO to a page and display the information.
But now I'm beginning to realize that I'm going to need this information about the user throughout the application. Do I have to include an iterator for the user info VO and associated attributeValues on every single pageDef, or is it possible to write a single managed bean that will expose the attributes of the single row of the VO as properties. The application I'm working on now is a "minor" upgrade of a JDeveloper 10.1.3 application, so I need a 10.1.3 solution, but I have a 11.1.2 application in the works that will probably do the same thing.
Oh, and sorry if this is an FAQ - I'm probably not using good search terms to find solutions that have already been posted.

Thank you Nick -
Your code didn't give me exactly the answer I needed, but it pointed me in the right direction. For one thing, I had a version of ADFUtils that didn't have the getApplicationModuleForDataControl method. However I was able to do a Google search and find working code for the missing method. And since the values I need to expose in the managed bean are from the VO, not the AM, I had to go one step further and get a reference to the VO from the AM, and then a reference to the first (and only) row of the VO.
For anyone else with this question, here's my version of the code:
public class UserInfo implements Serializable {
    private String eMail;
    private String stateCode;
    private String fullName;
    public UserInfo() {
        AppModuleImpl appModule =
            (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
        ContactInfoViewImpl contactInfoVO =
            (ContactInfoViewImpl)appModule.getContactInfoView1();
        contactInfoVO.reset();
        ContactInfoViewRow contactInfo =
            (ContactInfoViewRow)contactInfoVO.first();
        stateCode = contactInfo.getConStCode();
        System.out.println("At construct UserInfo stateCode=" + stateCode);
        eMail = contactInfo.getConInternetAddr();
        System.out.println("At construct UserInfo eMail=" + eMail);
        fullName =
                contactInfo.getConFname() + " " + (contactInfo.getConMi() != null ?
                                                   contactInfo.getConMi() +
                                                   " " : "") +
                contactInfo.getConLname();
        System.out.println("At construct UserInfo fullName=" + fullName);
    public String getStateCode() {
        return stateCode;
    public String getEMail() {
        return eMail;
    public String getFullName() {
        return fullName;
}

I need some info about the Document Class.

Hi,
I need some information about the Document Class, can anybody
tell me where I can find it.
thanks

Emad Zedan,
> I need some information about the Document Class, can
> anybody tell me where I can find it.
The concept of the document class was introduced in Flash
CS3. What it
does is allow you to optionally associate a custom AS3 class
with your FLA
in the Flash authoring tool. Your document class effectively
*becomes* the
main timeline. This is your chance to influence the
underlying behavior of
the MovieClip or Sprite instance that serves as the
foundation for your SWF.
If you don't associate a custom document class with your
FLA, the FLA is
associated automatically with a default document class called
MainTimeline,
which extends MovieClip.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

I need some information about jre 1.5 and jre 1.6.

Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.

In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said?

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

N unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have?

Gettting information about the processInstance from BPMObject

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

PCD Audit : What information about the PCD objects are stored in the PCD?

Folks,
Need some information on the information stored in the PCD for audit purposes.
Object = Any PCD object, typically iView, Page, Workset, Role, Group...
1. Creation of any object - Should definately be present in the PCD
2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
Thank you...

Hi,
>>1. Creation of any object - Should definately be present in the PCD
There is no doubt about this.
>>2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
AND
>>3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
There is no versioning concept in PCD right now, but ofcourse planned for future.
So you cannot track the history and deleted objects, but there exists PCD Repository Manager in KM on which you can activate versioning. Check if this suites your needs. Never tried but logically ever PCD change should get versioned here.
http://help.sap.com/saphelp_nw70/helpdata/en/76/a8934259a5cc6ae10000000a155106/frameset.htm
Greetings,
Praveen Gudapati

Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

Backup problem message: "no information about the ...

Hi my problem is I want to backup my phone, which I've never done in the past so the first time I try it comes up with the message "no information about the latest backup available..." and it says something about try restoring already made backups if I have any, however I've never done so. So I thought maybe it auto-backups? So I try restore but nothing is found (not surprised since I've NEVER made backups). And the phone is seen through the CA-53 USB cable.
Now I got a generic USB cable which driver for it is possibly different then the one for this newer version of PC Suite because the USB driver CD also included an older version of PC Suite (version 3.0 I believe) however I skipped that and just installed the driver, then went online and got the latest version of PC Suite for my phone. It said it had to change drivers, etc. And so I just let the online PC Suite's USB drivers write over the one that came with my cord. PC Suite connects fine, I think everything works. Music transfers, it is seen and connected. Haven't tried other things but I just want to make a backup. Which comes up with that wierd message. Anybody have any ideas? Cuz All I've found about backups are people who have already made ones and then errors occur. I can't even get to that stage. Now the whole talk about drivers for the USB cord might have nothing to do with it (since everything else works fine) but I just thought I'd mention it.\
Thanks so much and I know I've probably added some useless info but I really want the problem resolved.
Thanks in advanced!
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (Canadian)
Input language: English (United States)
Nokia PC Suite:
Version 6.81.13.0
Language: English
My USB Driver Version: 9.0.333.0
Connectivity Cable Drivers (With Nokia PC Suite from online):
Version 6.81.1.2

Sorry for double posting ONCE AGAIN but I just realized I'm on the Europe site instead of the Canada/US site...so sorry! But I think problems could be the same.

I need an information about the Language in the Product Download Section

Similar Messages

Maybe you are looking for