I need an iPad 2 to PC USB cable

I bought one a while back but it isn't compatible. The iPad connector will fit a cellphone.
So, could someone please recommend a few online links to order this quickly? Thanks

http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=3 0+pin+usb+cable
There you go, though as was said, they may or may not work. The apple one guarantees it will work.

Similar Messages

Tried to sync ipad2 with itunes and got an error and now ipad frozen with usb cable/arrow/itunes logo.

I'm trying to sync music from my itunes library on my PC to my ipad2. During process got an error(don't remember #) and then it went to backing up. Now the ipad is frozen with a usb cable coming up to a white arrow and then the itunes logo. The ipad will turn on and off but nothing else. Any ideas?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

How do i get an internet connection from my Mac to my iPad using a usb cable?

I have a Mac connected to the internet through a modem. However, i also want my iPad to share this connection through the usb cable. Is this possible? If not, is there any other way i can get my iPad to share the internet connection from my Mac?

It look like you can turn your mac into a hotspot and connect your ipad to it via wifi.
http://computers.tutsplus.com/tutorials/quick-tip-use-your-mac-as-a-wi-fi-hotspo t-and-more--mac-46462

Do I need to plug in both usb cables on a external HD?

Hi guys, I got a Comstar 500GB 2.5" USB powered external hard drive for Christmas. It came with a USB Y Cable and my question is do I have to plug in both USB cables to see maximum performance? Or is the Y cable for computers that provide lower bus power to their USB ports and so need 2 cables for the drive to function properly? Is the second USB cable necessary for the MBP (Late 2008)?
I realize I could easily test this myself but I don't want to open it yet because I am thinking about exchanging it for a WD passport instead (which only comes with 1 USB plug).
Thanks in advance for your help!

The second USB plug is there to provide an additional source of power for the drive. It does not have the data lines connected to the hard disk. The manufacturer felt that 0.5 ampere was a marginal power source for the hard disk so you should always plug both cables in so the drive has 1 ampere at it's disposal. With only one cable connected, you run the risk of the USB port being overloaded and shutting down which may corrupt the data on the hard disk.

HT1766 My Ipad shows a USB cable and Itunes logo. My Ipad will not work

My Ipadshows a Itunes logo and A picture of a USB cable and will not work. What do I do?

1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Air Play mrroring. 4.4 via USB and iTunes. This needs a type B micro USB cable.

as per heading.
It worked thanks to other posts but little thanks to Apple who cost me £1.05 by not answering my call.

I have now solved my tethering problem - I didnt need to use terminal.
I downloaded the kext utility, unzipped it and put the .app file into my applications folder, then I dragged the kext file from my laptop (AppleUSBEthernetHost.kext version 2.3.0)
The utility replaced the one that itunes 10.7 must have installed or modified into a backup folder and installs the one from my laptop where I was still on itunes 10.6.3 and it has the same permissions as the other files in that folder system/library/extensions
I rebooted and plugged my iphone in via the usb charger/data cable and immediatly the system put up a window stating:
A new interface has been detected
the "iphone USB" network interface has not been set up. To set up this interface use network preferences"
I then clicked the blue button NETWORK PREFERENCES
This showed the iphone in NOT CONNECTED status so I clicked on ASSIST me and just keep going, you will notice the red dot beside the iphone changing to orange (no IP address) then it changes to green and all is well!!
Thanks a million to Hibernian56 and whoever made kext-utility!!
No thanks to apple for not testing their software properly and wasting my time with hours of reading online!!!
Im on 10.6.8 on both machines
The problem with the kext file that was updated by itunes 10.7 was that the machine no longer detected the iphone thru the usb cable. Thanks to the other users on here its now fixed! ;-)

Hello , need help urgently regarding MIDI USB cable

hello ,
i recently bought a Midi to usb cable and i tried to connect my keyboard [ psr e303 ] to my macbook pro. When i went to the Midi Audio setup , I saw a USB2.0 icon instead of my keyboard's name. And when i went to garageband , it detected 1 midi input. However when clicked recording and i pressed the keys on my keyboard. Nothing was recorded. Can anyone help me please ? i've googled and been thru so many pages but i'm still stuck..
Thanks,
marc

mozarto wrote:
I saw a USB2.0 icon instead of my keyboard's name.
the computer has no way of retrieving the name of your keyboard through an interface.
Nothing was recorded.
first thing to check:
http://www.bulletsandbones.com/GB/GBFAQ.html#controllertointerface
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT1692 I just upgraded my pc to Windows 8. How can I sync my iPhone 5 and iPad using a USB cable with iTunes for Windows 8 ?

How do I sync my iPhone 5 and iPad using iTunes with my new Windows 8 computer? Windows support community implies it's an Apple problem.

chateaudrive wrote:
roaminggnome,
Windows Support says you cannot sync Calendar function for iPhones with Windows 8
You did not mention this in your 1st post.
Did you try the troubleshooting steps on the page you came from?

TS2634 How to replace my faulty week old iPad lighting to USB cable?

It's not working now. I bought my iPad online. Where do I claim my warranty or get it replaced?
I am in Kuala Lumpur, Malaysia.
Marvel

Thanks. It's Chrismas today and will try tomorrow.
The phone support is off today.

Hi my iPad 2 charger the one with the USB port and a USB cable doesn't work anymore I've changed fuses even tried a different cable no luck HELP!!!

HEEEELLLLLPPPP MEEE I'm going crazy!

Sounds like you need to restore your Apple TV to factory settings.
See this Apple document:
http://support.apple.com/kb/HT4367
You will need to use the "Micro USB Cable" to restore it to factory settings.
See the article shown above.
You must unplug the power cord before connecting the ATV to your computer....

IPAD connected via USB does not show in Windows

PC Specs : HP ProBook Windows 7 Professional 64 SP1 32 bit 4GB RAM 320GB HDD, Kaspersky ES 10.
I have a client with an iPhone which he connects to his laptop via the iPhone USB cable. He used to copy pictures from the device onto his laptop. Today that does not want to work any more for some reason. If he connects it, it simply does not even detect in
Windows. It doesn't even charge ! Before Windows, in the BIOS , there it charges. In Windows, in the device manager it does not even show anywhere. Also, it does make a one-time-connected-system-sound, when it is plugged in but that's all. In device manager,
there is no alert, no exclamation or error.
What was tried so far :
1.) Disabling anti-virus.
2.) Removing Upper Filter in HKLM/S/CCS/C/Class/[ID] for USB devices of Kaspersky driver association.
3.) Testing the iPad and the USB cable on other machines : Cable works fine.
What I still need to try :
1.) Installing Apple Mobile Device Drivers
What I do not want to do :
1.) Re-install Windows
2.) System Restore (restore points are very old, so unit will use many settings and programs if I do a restore).
What else might I try to get this working ?

Thanks for the responses !
@Milos Puchta :
No things I can see regarding the issue in the Event Logs. Updates were installed on the 15/08/2014... Maybe you can tell me which ones were problematic so I can see if they are installed (There are a lot). Maybe one of them was the culprit with other people
... a known update that was known to cause this
@SenneVL :
The USB are working perfectly. I tested my own USB drive, a USB hard drive, mouse etc and they work wonderful without issues. I must note that some or all of them also have the Upper filter installed. I installed ITunes (which comes with Apple Mobile Device
Driver) and confirmed the service is running. I will post on the Apple Forums too... when I do get time.
I checked with a resource monitor. If I connect the iPhone via USB, it throws out this (amongst million others) :
RegOpenKey, SUCCESS
HKLM\System\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8BC1B9352C1771F5E5981DE35FEE26E08E5DE63B
This relates to Apple inc (VID_05AC)
This is the registry key
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b]
"DeviceDesc"="iPhone"
"LocationInformation"="Port_#0002.Hub_#0004"
"Capabilities"=dword:00000014
"HardwareID"=hex(7):55,00,53,00,42,00,5c,00,56,00,49,00,44,00,5f,00,30,00,35,\
00,41,00,43,00,26,00,50,00,49,00,44,00,5f,00,31,00,32,00,41,00,30,00,26,00,\
52,00,45,00,56,00,5f,00,30,00,34,00,31,00,30,00,00,00,55,00,53,00,42,00,5c,\
00,56,00,49,00,44,00,5f,00,30,00,35,00,41,00,43,00,26,00,50,00,49,00,44,00,\
5f,00,31,00,32,00,41,00,30,00,00,00,00,00
"CompatibleIDs"=hex(7):55,00,53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,\
5f,00,30,00,36,00,26,00,53,00,75,00,62,00,43,00,6c,00,61,00,73,00,73,00,5f,\
00,30,00,31,00,26,00,50,00,72,00,6f,00,74,00,5f,00,30,00,31,00,00,00,55,00,\
53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,36,00,26,00,53,\
00,75,00,62,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,31,00,00,00,55,00,\
53,00,42,00,5c,00,43,00,6c,00,61,00,73,00,73,00,5f,00,30,00,36,00,00,00,00,\
00
"ContainerID"="{27b106ba-aa0b-5135-b303-213164031771}"
"ConfigFlags"=dword:00000000
"ClassGUID"="{eec5ad98-8080-425f-922a-dabf3de3f69a}"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\Device Parameters]
"ExtPropDescSemaphore"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\LogConf]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_05AC&PID_12A0\8bc1b9352c1771f5e5981de35fee26e08e5de63b\Control]
can you see anything wrong with this key ?

Black screen with apple tv icon and usb cable going into itunes logo

Unable to get apple tv to play--never happened before.
I upgraded iTunes and still no response. I did note that airplay feature not showing in iTunes.

You need to grab a micro usb cable and restore via iTunes
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Does Apple TV use a regular USB cable?

Do you need to ur chase the USB cable separately and is it a regular USB or a micro USB cable?

The USB cable is only needed if it becomes necessary to restore the ATV from a computer.
Any micro USB cable will work, it does not need to be specifically purchased from Apple or for the ATV.

HT4367 I don't think I have an open outlet for a micro USB cable on my apple tv

I understand that I need to connect a micro usb cable from my apple tv to my computer to restore, but i don't have an outlet on the back of my apple tv to do so. Am i missing something?

Welcome to the Apple Community.
Take it to the nearest Apple Store, they'll be more than happy to restore it for you. If the nearest store isn't all that near, take it to a friends house that iTunes on their computer.

What USB cable for in car use?

I have just received my brand new car & it has a USB dock to plug your Iphone 4 in to use through the Stereo/Screen but have been told it needs to be a particular USB cable for it to work?
Can anyone inform me what USB cable i am actually looking for as a standard USB charging one does not work?
Thanks

What kind of car? I use a stock Apple in my 10' Acura TL and it charges and connects fine.

Ipad 2 has usb icon and frozen screen

Trying to install itunes so that I can sync my gmail contacts with my new iPad2. Now I have a frozen iPad screen with usb cable showing on the screen.

Install iTunes on your pc.
Plug the iPad into the pc.
If iTunes does not start on it's own, open it.

I need an iPad 2 to PC USB cable

Similar Messages

Maybe you are looking for