I need assistance if anyone can help please do!

I have got a product from a retailer that needs a serial number can anyone find out or tell me where I need to go? I get so far and I get referred to something completely different to what I need.

Here is a helpdoc. Follow the instructions. Then contact Adobe if you still need assistance.
Find your serial number quickly
We are forum volunteers and not Adobe Staff, so we have nothing to do with serial numbers.

Similar Messages

My itunes deletes all of my apps, music and movies every time i go on it and i have to recover it, its such a painand if anyone can help please dont hesitate to comment

Every time i go on my itunes its as if i have just got it and i have never used it before it's as if it resets over night and the next day i have to load all my apps, music and movies back on to it. if anyone can help or if anyone knows someone who can please say something because its a right pain in the neck. My operating system is Windows Vista and my Itunes version is 10.2.2.12
please help

Your problem is normally caused by a program locking the iTunes library so that iTunes can't close properly. There have been a number of causes fro this.
There is a problem with media management software Vaio xml library Manager, the Vaio content manager and the Vaio Music Box software
http://discussions.apple.com/message.jspa?messageID=8537277#8537277
Work around:
In Control Panel, turn off Vaio Content Folder Watcher and VAIO Content Metadata Intelligent Analyzing Manager.
Also see:
http://support.apple.com/kb/ts2715
Sony has issued upgrades for some models, check you Sony download site to see if there is one available.
I would check the work around first.
If that's not it, try temporarily disabling you continuous backup to see if that is the cause.

I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please

I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please

Right click the hard drive icon and select Get Info. In the new pane, on the bottom, do this:
1. click the padlock, and authenticate with your password.
2. change Privilege to Read & Write - just click what is there and options will appear.
3. close the pane.

I need to fix this problem! every time I put a cd it says: " You've inserted a blank CD. It's not readbale! anyone can help please?

im struggling since last year. I need to listen the cd's they are not copies. They come in a pocket ( course.) IDK what to do..:(

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***

Please Help!!! My iPod Touch 5th gen will not turn on!!! If anyone can help, please do so!!!

I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on at all!!! Can anyone please help me with this problem?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
ChrisAllen109 wrote:
I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on ...
But it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

Since I updated to Yosemite, I can't export my slideshows to VDO. Anyone can help, please?

Since I upgraded my Macbook Air to Yosemite, I can't export any of my slideshows which I used to be able to do before the upgrade. Please help or any suggestion.

                   Fault report by Gordon Thomas 28/10/2014
iPhoto (on my Computer Described below) performs most operations with the exception of the Export of generated slideshows :
I click on the export icon and get a widow offering me a destination for that slideshow. Neither iTunes or a nominated location receive the slideshow.
                           System Details
V        Version of iPhoto I am using?        Version 9.6
• S    System version I am u running?    Version 10.10
•        What I see in the iPhoto window when iPhoto opens?
           Normal index of contents and associated images
•       What fixes have I tried?    None
•M     My PhotoLibrary is located in
          Macintosh HD ▸ Users ▸ gordonthomas ▸ Pictures
• I      I applied updates just prior to the problem occurring?
      i   Photo Version 9.6 installed Oct 17, 2014
          OSX Version 10.10 installedOct 17, 2014
• I     I am running a
        Managed Library
•      My Mac is a
         Mac mini Late 2012
• T   The free space on my boot drive is
          132.83 GB
   H                             Help Please

I'm having an issue. if anyone can help please respond.

I have a WRT400N router, I have my ps3 and my desktop computer hooked up wired to this router. As far as I know the wired connections randomly disconnect and reconnect. My ps3 and desktop disconnect from the internet and moments after reconnects by itself. I have no idea what is causing this issue. The wireless seems to not have the problem. Its not my ISP my modem lights remain on and internet access for the wireless connections seems to have no problem. What is going on with this? i'm at a lost and it is very annoying to lose connections 2-3 times a day like this.
Does anyone have any idea whats going on?
BTW I have brighthouse's Road runner cable connection.

On your Router under the wireless tab click on the "Advance Wireless Settings" tab and below change the Beacon Interval to 50,Change the Fragmentation Threshold to 2201,Change the RTS Threshold to 2202 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

HT1766 i have ann error (-1) when restoring my phone in itunes anyone can help please

i dont know what i need to do? i have iphone 5 i always have a msg from itune whenever i am restoring my phone it says error (-1) please help

http://support.apple.com/kb/TS3694#error1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
If you have already tried this several times with no change, the iPhone includes a one year warranty.

CATW data disappear. Anyone can help please?

Dear all,
I actually use the standard CATW for the employee to record their overtime. It works fine until last Friday the check entries button in the portal seem like does not work.
The scenario is where after the employee key in the overtime in the time sheet, they will have to click on the check entries button before saving it. Now the problem is after the employee click on check entries and save the data, the data disappear from the timesheet and no workflow trigger for the employees manager to approve the OT.
Anyone got ideas about this problem?
Thanks
Regards,
Bryan

I don't think this has anything to do with the java version because Oracle 8.1.6 comes with jre 1.1.8. I believe that the install process sets up its CLASSPATH to use only those jars which come with the distribution.
Read the other posts on this bboard about installing Oracle on a RedHat 7 platform

Ps3 and ps vita had a poor connection with airport express but it works well with my macbook air and iPad and my iPhone , anyone can help please?

please advice!
i am using the 802.11n (2nd generation)

I have already tried this but still the same. I have also tried un-pairing my speakers and re-pairing! Still get broken playback at times. This even happens when I am close to the bluetooth receiver.

ISync SyncServer crash report. - if anyone can help, please do.

Nov 26 18:21:39 metallic-hydrogen-com crashdump[875]: SyncServer crashed
Nov 26 18:21:40 metallic-hydrogen-com crashdump[875]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log
Nov 26 18:22:32 metallic-hydrogen-com crashdump[900]: SyncServer crashed
Nov 26 18:22:32 metallic-hydrogen-com crashdump[900]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log
Nov 26 18:23:31 metallic-hydrogen-com crashdump[905]: SyncServer crashed
Nov 26 18:23:32 metallic-hydrogen-com crashdump[905]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log
Nov 26 18:23:33 metallic-hydrogen-com crashdump[908]: SyncServer crashed
Nov 26 18:23:33 metallic-hydrogen-com crashdump[908]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log
Nov 26 18:27:18 metallic-hydrogen-com crashdump[951]: SyncServer crashed
Nov 26 18:27:18 metallic-hydrogen-com crashdump[951]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log
Nov 26 19:13:12 metallic-hydrogen-com ntpd[187]: time set -0.113096 s
Nov 26 19:13:41 metallic-hydrogen-com crashdump[1023]: SyncServer crashed
Nov 26 19:13:52 metallic-hydrogen-com crashdump[1023]: crash report written to: /Users/eroche/Library/Logs/CrashReporter/SyncServer.crash.log

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
ChrisAllen109 wrote:
I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on ...
But it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

Urgent..please anyone can help me??????

<b>Hi all..
please anyone can help me.for this issue....
My Requirements is first need to MR11 tarnsaction and create zmr11 transaction and also the copy the corresponding MR11 program create Z program, which i did it.
but now i have create a POPUP window, which contain
Account:           Cost Centre:
                   Internal Order:
                  Profit Centre:
We need to copy the program for MR11 and inside it, refer to a copy of MR_ACCOUNT_ASSIGNMENT, which would contain the logic for replacing the account number picked up from configuration with that entered by the user.
The code that needs to be added here would generate a popup, accept the account number from the user, and replace the value of KONTO with this number, which is the export parameter for the Function Module.
At some point before the call to this FM we would need to write code to generate a pop-up, which would be populated by the user with G/L account at run-time.
i need to modiy this internal table::::
Call function' CKMLGRIR_BUILD_GRIR_MAINTAIN'
   tables
      lt_grirpos = t_grirpos_package
The internal table t_grirpos_package would need to be modified at this point and populated with the values populated by the user in the pop-up screen.</b>

<logic:iterate id="dtoi" name="ages"
collection="ages.keySet()" indexId="dtoi">
<% interfaz.GenericDto dtoEA =
(interfaz.GenericDto)dtoi; %>
<% if (dtoEA != null){ %>
<% }; %>
</logic:iterate> Try the following (assuming "ages" is the HashMap - adjust as necessary):
<logic:iterate id="dtoi" name="ages">
<tr>
<td><bean:write name="dtoi" property="value.edad"/></td>
<td><bean:write name="dtoi" property="value.ctotal"/></td>
</tr>
</logic:iterate>

I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Please help error -9808 when downloading apps in itunes store anyone can help me out

please help error -9808 when downloading apps in itunes store anyone can help me out

Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808

I need assistance if anyone can help please do!

Similar Messages

Maybe you are looking for