I need badly to keyframe Color effect parameters. I don't see the way to do it in FCPx. Will I ever be able to do it?

A very common situation is a lighting change within a single clip. In previous versions of FCP it could be easily handled by keyframing exposition and color effects. There is no such feature in FCPx. I need it, and I need it badly! Blading the clip and adding cross-disolve, as it is advised, gives disgusting result - leave that for iMovie users. I would also appreciate if the following features will be added to color effect: 1. The possibility to edit not only using color board, but also numerical input. 2. The color pickers for neutral colors. 3. The possibility to fine-tune the automatic color balance parameters and saving them to use for other clips.

I believe we are expected to use Effects for things like your lighting change. There are several in the Effects browser under Lighting that may accomplish what you are after; Bloom, Glow, Aura, etc. I presume the theory is that these should give you greater control and a richer effect than a simple exposure control.
And if they don't do what you need, it is not difficult to whip up your own in Motion. Creating a simple exposure control should be ... simple. That is, if you are into Motion. Which with Final Cut Pro X seems to be an increasingly valuable skill.
Regarding requests 2 and 3, they do not seem approachable in Motion.

Similar Messages

HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white.

How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white. I have an Epson Workforce 845 printer.

There is no option to force black and white ouput.
You can request the feature here:
http://www.apple.com/feedback/ipad.html

I need help with Apple iCloud verification. I don't have the email and I can't figure out how to get Apple to send me a new one.

So, in order to back up my music and stuff to the cloud I need to verify my Apple ID and I don't have the verification e-mail. If someone out there could help me out by telling me how to get Apple to send another one, or if they can, I would appreciate it alot. Thank you!!!!!

Apple ID: Associating and verifying email addresses with your Apple ID

I need jre version 1.6 u53. I don't see this version listed on download pages. Where can i download it from?

I need jre version 1.6 u53. I don't see this version listed on download pages. Where can i download it from?

Do you have specific problems with Flash that you needed to visit the Adobe help pages?
Make sure that you allow the plugin-container.exe process in the firewall.<br />
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Need to cancel an auto renewal subscription but don't have the device. can i do it fron itunes.

need to cancel an auto renewal subscription but don't have the device. can i cancel from itunes?

Yes, see that topic of:
iTunes Store: Purchasing and managing auto-renewing subscriptions

So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you aren't getting the link then that implies that you don't have one and you won't be able to add one until you can answer 2 of your questions - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been resetyou can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

I added icloud to my ipad 2 what will i need to do with my mac in order to start seeing the video and pictures on my mac onceI take them on my ipad

I added icloud to my ipad 2 what will I need to do with my mac in order to start seeing the video and pictures on my mac once I take them on my ipad ?

See Here
Apple - iCloud - Learn how to set up iCloud on all your devices.

HT1918 Hi, I need help. I would like to change religion. By the way it say on the screen like this; you still have credit, so you can't not change your reigion. Please spend up your credit and then change your reigion.

I need help!
Would you answer me, please?
I would like to change my region. By the way, it says that I should spend up all my credit ($0.29) unless I can't change my region.
I am staying in South Korea temporary and I would be in Australia in several months. So I didn't change my account. I asked my friend to send me iTunes cards number to recharge credit. But I would like to change the region this time. I want to use debit card here in South Korea.
Does anyone could help me? Thanks !!

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

I am trying to do a clean install of Snow Leopard on an Intel Macbook Pro. (Need to partition for Boot Camp) I have done it in the past so I know it works but whenever I select the install disk as the boot device it gets stuck on the Apple logo/pinwheel.

Prety much what the question says. HELP!

stephenfromlynchburg wrote:
No the mac had come with Leopard. Then I bought the snow leopard DVD and did a clean install of snow leopard.
If you just stuck the disk into the Leopard Mac and run the upgrader, you didn't do a "fresh install" you basically upgraded from 10.5 to 10.6 leaving all the programs and files intact.
The white Snow Leopard disk was the right one for that machine as it had Leopard (10.5) on it previously.
So you already have Snow Leopard installed, if you want to erase the entire drive (along with all your programs, files and OS X) and want to install Snow Leopard again, you hold the c or option/alt key down and boot the machine off the disk. Then use Disk Utiltiy to erase the entire drive, then quit and install Snow Leopard.
How to erase and install Snow Leopard 10.6
Once Snow Leopard is installed you log in and use Apple Menu > Software Update until clear to get to 10.6.8 and fix security issues.
Now I can't get it to do the install again.
To install Windows into BootCamp, you read and run the BootCamp Assistant located in the Applications > Utiltiies folder
It's important to change the drive format from FAT32 to NTFS before installing Windows using the Windows disk.
Windows is rather complicated to install, if you boot to a blinking line with "press any key to continue" you need to press and hold the power button down and reboot holding the Option/Alt key down to get back into OS X.
https://www.apple.com/support/bootcamp/
If your Windows programs are not going to be as CPU/GPU demanding, you may rather prefer to use a virtual machine instead
Windows in BootCamp or Virtual Machine?

HT4623 Need to update from 4.3.3 to ios 5 or 6 but don't see the 'Software update' on my General settings please help

I have tried everything I can think of to update my iPad folloowing online instructions but am stumped at the 1st hurdle with the settings - general - there is no Update software anywhere in the various lists.

Assuming you have iOS 4.3 as your tagline suggests. You'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
In the article you came from scroll down to the section titled: Update your device using iTunes

Will Lightroom ever be able to match the color/contrast of DPP?

Disclaimer, I'm a current 3.4 user and I've been using LR since version 2, it's my goto program for 98% of my work. What i've noticed is that it never quite renders the raw files as well as DPP and in certain high contrast scenes, DPP does a better job overall. I know or assume, Adobe reverse engineers the Canon raw file format and they do a great job at it, but I wonder if there's a reason Adobe doesn't attempt to license Canon's raw file specs for a perfect match with Canon's raw conversion software. I spend quite a bit of time making LR conversions look as good as my Canon jpgs opened and simply exported from DPP. Make no mistake, I have no intention of giving up the flexibility I have using LR, just wondering if they will ever nail it perfectly or is there some technique I might have overlooked that get's me much closer to DPP's output.

I used to feel the same way when I compared the results from LR to those from CaptureNX for Nikon raw files. I used to shoot raw+JPEG which meant I could effectively compre the default output of CaptureNX (which was exacty the same as the JPEG image out of the camera) to what ACR was doing in LR. Note that I'm not saying the CaptureNX/JPEG images were "correct" but just that they were different from what LR propduced. There was quite a lot of difference and I found the CaptureNX/JPEG images more pleasing.
Then along came Camera Profiles in LR. Once I used the Camera Profile which matched the settings I had in the camera (Neutral), I could not tell the difference between CaptureNX and LR in almost all cases. The few where I could tell ther difference, it was so subtle that I couldn't even say which I prefered.
I don't know how good the Camera Profiles are for Canon gear, but they work a treat for Nikon.

Are there any ill effects for turning up brightness all the way?

Are there are any ill effects or long term effects if you turn up and leave the monitor's brightness at full? I'm not worried about the battery draining or anything, I'm just wondering if it wouldn't be as bright two years down the road compared to if just always left the brightness at it's automatic setting. Thanks for your help,
Tom

Having your display at full brightness does speed up the natural decay of your display's maximum brightness over time. So, someone who has their display at 50% all of the time will have a better maximum brightness after two years than someone who had their display at 100% over the same period.
However, I would suggest you just use your display as you want to. I normally have mine at 75% as 100% is actually too bright for me.

I need to override a certificate error in version 31 - I don't see the old choice to add exception. How can I do this?

I work in a test environment and need to override the security error in new version 31, but it does not seem to be available. How can I do this?
Secure Connection Failed
An error occurred during a connection to shopdeluxe-bnb.uat.deluxe.com. Issuer certificate is invalid. (Error code: sec_error_ca_cert_invalid)

Options/Preferences > Advanced > Certificates > "Add Exception" is where you can add a local cert. There was also a new ca cert [https://blog.mozilla.org/security/2014/04/24/exciting-updates-to-certificate-verification-in-gecko/] If there are any issues please file a bug.
[Self-signed certificates make your data safe from eavesdroppers, but say nothing about who the recipient of the data is. This is common for intranet websites that aren't available publicly. ] via [https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message].
This may be helpful as well: [https://support.mozilla.org/en-US/questions/1002237]

How can I change scrollbar colors? It's hard to see the menu selection/color when scrolling through bookmarks, for example.

How can I make clearer the menu highlight selections, for example when scrolling through my bookmarks. The light blue color is hard to see in Windows 7. How do I change that color?? Running FF 3.6.6
== This happened ==
Every time Firefox opened

" Is there anyway I can define individually as to what color should be related to each text in ring menu?"
Well not with a ring and not programatically.
The best I can suggest is a picture ring, see below.
Ben
Message Edited by Ben on 11-18-2005 02:16 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Picture Ring.JPG ‏5 KB

Need to accept the general conditions, but don't see the 'accept' button

Hello, I am trying to download an application and I receive a message indicating that the iTunes general conditions have changed. Once I access the general conditions, I am suppose to see a 'accept' button, but don't find it. Can you please assist? thank you

MacBook Pro, Mac OS X (10.6.8)
Eric....
Install the Mac OS X 10.6.8 Update Combo v1.1
That will reinstall the App Store for you and may help the "conditions" dialog.
Restart your Mac after the combo is installed, try the App Store.
It's ok to do this even though you are already running v10.6.8.
If that doesn't help, try this...
Quit the App Store.
Launch iTunes.
From the iTunes menu bar click iTunes > Preferences then select the Advanced tab.
Click: Reset warnings and Reset cache
Click OK.
Quit iTunes. Launch the App Store, try again.

I need badly to keyframe Color effect parameters. I don't see the way to do it in FCPx. Will I ever be able to do it?

Similar Messages

Maybe you are looking for