I NEED BIOS MODDED MSI K7N2 DELTA 2 LSR

I HAVE A i have a MSI K7N2 DELTA 2 LSR V1 0C --and i want to mod my bios to some version that i can overclock my motherboard can you send the bios please..thanks U
because is too inestable
it will working?
where i can download it ?
my mail
[Removed by moderator]
This is!!
http://cgi.ebay.com/MSI-K7N2-Delta2-NF2-SATA-Socket-A-462-MOTHERBOARD-EMS_W0QQitemZ160296847492QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item160296847492&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318
http://www.overclockers.cl/foros/index.php?showtopic=162946&st=20&gopid=1061544082&#entry1061544082

Please don't keep posting the same question in multiple topics.
Before you even consider overclocking, you should ensure your system is stable at stock settings. Also you'd be foolish to attempt a BIOS update on an unstable system.
Please read the >>Posting Guide<<, describe your problem in detail, and then we can help you better.

Similar Messages

MSI K72N Delta LSR - windows XP keeps stop codes and serious errors Puzzled why

hi,
System specs
AMD sempron 2400
512mb DDR PC3200 ( 2 x 256nb Matrix module brand memory written on chips )
MSI K7N2 Delta LSR ( lastest Bios )
Onboard sound - Enabled
Onboard lan - Disabled
Liteon DVD Rom
CD-RW 52x
ATI Radeon 9550 ( installed at moment )
before was a Nvidia FX5700 LE took back faulty as tried radeon 9800 pro and was ok for a couple hours
got Nvidia FX 5500 - faulty fan making noise on boot.
Ive built a System up and its been running fine for a few months and then 1 day system crashed and got windows recovered from serious error and and wound't shut down but only restart.
Replaced memory that was in and checked with mem99 and said it was faults so replaced memory and shutdown problem vanished.
Few days later windows xp started saying recovered from serious error again with stop codes
0x0000050
Bccode 10000050
Bccode 1000008e
Bccode 1000000a
Stop Code D1
They was the stop codes been getting since, some said Page_fault_in_nonpaged_area, IRQL_not_less or Equal
Im puzzled what the problem can be know, even tried reformatting and reinstalling windows twice and not solved it, tried a another cdrom drive and still same.
Im puzzled what the problem can be.

Temps are fine running about 45'c in windows and max about 52'c when in full load ive got motherboard monitor on all time monitering temps and also recording and save out log file when turned off for temps.
Its a retail boxed AMD Sempron which i dont think much to the stock heatsink and fan ( Athlon 64bit ones are loads better copper base and heat compound instead of sticky pad )
The new memory is only think is got whats wrote on the memory modules is called Matrix, I know from past experience's when u reinstall windows and files cant copy across ok and keeps saying cant read file etc or cant copy file during installation thats indication bad memory strip, ive even got a memory thats fault ( i only use for testing and diagnostic ) as 1 of the memory modules comes up fault in memtest96 and even tried that and still same, thats how i found out in first place memory was causing system not to shutdown properly.
What i can try is my memory as ive got 1.5gig in Elixir branded and i know thats ok 100% with nforce 2 boards as i had a MSI K7N2 Delta ILSR and ran elixir memory with np, before i got a Gigabyte KT880 board.
Antivirus ive got running on system at the moment is AVG and always used it all time, it dont use any cpu usage and also saved my system loads from virus as it caught them as they tried to run and stop them, something norton's dont seem to do very well.
I give modem a try on a USB hub but its strange when u unplug USB its ok and NTL recommends when modem stops working to unplug power from back modem and leave it a while and it comes back on, done this in past successfully but this time its blue screening, Which could be part of windows main files are corrupted. The USB Modem is running of its own PSU so shound't be using USB power at all, if it was that explain blue screen when taking power off as it do it when taking usb out.
Error codes ive watched a Microsoft web broadcast ( over a hour long ) about error codes and 40% of them are software + hardware related combined they make it sound so easy to diagnose them but in reality unless u know windows 100% its hard to.
Harddrive seems to copy files ok across and back, i have to try another Harddrive and see but from past experiences when Harddrives are about to fail windows seems to stall, lockup and also just stop responding when accessing certain programs or files.
Its a confusing 1 as u solve 1 piece of puzzle another comes up and throws u off track again.
Looking that all parts ive replaced so far have solved 1 or another problem to only reveal another hidden, PC's who have them lol
If i solve it i post my finding np it keep me busy for a couple days testing things, u learn something new every day with pc's new faults and problems and how to solve them, try too lol
And most of time its compatibility problems but odd times hardware or software.

Kate needs HELP!!! MSI K7N2 Delta ILSR

Guys...
pls help me...
I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
I installed everything assembled it... booted and loaded fine for about 3 times...
and suddenly....
>power on
>no video
>no beeps
>after checking hard nothing happens...
>only thing I can tell is that the d bracket is indicating "memory section"
....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
Why woudl a memory suddenly not work?
I know I was adjusting bios for this and that....
I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
COuld it be the mobo or memory or the video card???
pls help....
My email is [email protected]...
please please help...
and guys in MSI what is your expert opinion? mobo? or memory?
Heeeeeeeeeeeeeeeellllp...
thanks...
Kate x

hi and welcome to this forum.
nice to se a girl here for a change
clear cmos jumper jbat1.
also try safe mode jumper j10 ans j11.
also try to reseat memory and dont trust the dbracket to 100%.
it can show wrong sometimes.
Quote
COuld it be the mobo or memory or the video card???
when you got it running then run http://www.memtest86.com to check memory,
also what psu do you have ?
post max amps on 3.3v 5v and 12v rails.
minimum is 28 35 16.recommended is higher.

MSI K7N2 Delta-ILSR Wont boot up (no display no bios)

Hi
i bought a AMD Athlon XP 3200+ & MSI K7N2 Delta-ILSR.
unfortuntly i can't boot it. it wont show anything on screen.
i have tried anything i red in this forum (clear cmos... safe mode jumper...strip all parts...)
all i get is :
blank black display, no beeps and keyboard lights flashes over and over (when connected to a KVM hub), when conected directly to keboard the lights flashes only once but stil black display and no beeps (i hear on speake,when powering up PSU, a silent short noise, no beep).
power suply turns on (new one 500w), i tried agp video card and replaced with pci video card.
memory is kingstone 512mb pc3200 400MHz x2, i tried only one of them and both in diferent sockets.
cpu: AMD xp 3200+ 400fsb.
i did succed to go into bios only once, after lots of resets and shutdowns and bios clear (after ouers)
i choosed in the bios: load bios defaults, and thats it. i hoped it starts up but nothing.
i did all testing i know (checked all pins, cables, clear cmos...all, you name it)
all parts are brand new (except motherbord. it's seconds hand from eBay. i've bean talled that it works fine)
i also e-mailed MSI support that question. (2 days ago. no answer yet)
oh...and i have a pci POST diagnostic card and its 7seg display don't shows any numbers, only when once i succed to get into bios. i don't have the msi original D-Breket addon diag.
can you help me?

hi guys
here is my PSU specs:
Colors-It 500w-Max Silent ATX Power Supply
Voltage 115/230V
Current 10A/5A
Frequency 60/50Hz
+3.3 +5 +12 -12 -5 +5SB BLK GRN GRY
30A 50A 15A 1.0A 1.0A 2.5A COM P-ON PG
connectors:
ATX-2.03 Connector: 1
ATX-12V Connector: 1
CD-Rom/HD 4 Pin connector: 6
Floppy 4 Pin Connector: 2
Serial ATA Connector : 1
cpu: AMD Athlon XP 3200+
MotherBoard: MSI K7N2 Delta-ILSR More: http://www.msicomputer.com/product/p_spec.asp?model=K7N2_Delta-ILSR&class=mb
Memory: kingstone 512mb pc3200 400MHz x2 More: http://www.ec.kingston.com/ecom/configurator/PartsInfo.asp?ktcpartno=KVR400X64C3A/512
i have other brand of memory moduls (micron pc2300) i tried them too. no go.
i tried other PSU, i pulled from my brothers pc (amd xp 1400+).
as i said before, i have pci POST diagnostic card so it could tell me any problem. iguss it's the mobo, posibly bios upgrade.
but if mobo not showing bios, i can't update bios from floppy.
and the tested the mobo out side the case on a antistatic mat and i useed an antistatic strip.
as i said i could get into the bios once, after many resets....choosed 'load bios defaults..', restarted and.....no go.

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

MSI K7N2 Delta-ILSR MB Problems, Need Help ASAP!! PLEASE

Ok I just got this motherboard (MSI K7N2 Delta) Yesterday and after getting it setup I began overclocking the Processor (an AMD Athlon XP Barton Mobile 2500+) I was at 11x 215 1.750V Perfectly. I moved to 216 it started to seem unstable so I pushed the VCORE up to 1.775 and tried 217. It couldn't boot so I dropped it back down and decided ok 208 and a 11.5 multi might get me past the 2.4 mark which I was looking for. Well when I changed the Multi. to 11.5 and said save the system just sate as the flashing y for save. I could not change it to n I had already pushed enter So i firgured great and left it alone for a few minutes, nothing so I reset it. Now it refuses to boot/post. It spinds the fans the HD's the Network port is going but I get no picture. I have cleared the CMOS using the jumper I have removed the battery and power for over an hour and I still get nothing. I am assuming this is a BIOS error but I am not sure what to do to fix it. Does anyone here kno maybe, something I have yet to try something I can do? I would hate to RMA it and have to wait on newegg. Hell the thing is a day old. So please any idea's are welcome I have this posted on the Hard Forums as well but I am hopinh this forum may be more popular with getting help as no one is helping over there. Thanks!

Hi,
Cross: Just in case you are doing something wrong there's a clear CMOS guide here, follow it to the letter (and don't forget to put the FSB jumper to SAFE beforehand - there's a note about it in the guide).
How To Clear the CMOS
Your system board or CPU maybe not be dead yet - I had a similar problem with one of my boards and I tried everything - to cut a long story short I eventually got it working!!!
Btw, If you can't boot or get into the BIOS put your other CPU in (clear BIOS again after fitting!), so that you can prove whether your motherboard is working correctly!
Good luck! I'm off ta bed!
Axel

MSI K7N2 Delta-ILSR Nforce2 (Socket A) Motherboard (MB-003-MS) Features NF2 chip

I tried to install 3 of the Crucial Ballistix Tracer (1 Gig Each) in this motherboard (MSI K7N2 Delta-ILSR Nforce2 (Socket A) Motherboard (MB-003-MS) Features NF2 chipset) and it will not run stabilly no matter what I tried. Is this a bios conflict with the memory? If so, are there any new bios updates? I have tried cas settings and voltage settings but nothing works. It will how ever run perfectly with only 2 sticks in single channel mode. It will not run same 2 sticks in dual channel mode. Anyone have any ideas? Anyone know of any new motherboards with maybe NFORCE 4 Chipset that support all 3 sticks of this memory and an AGP graphics card? Im thinking of a new motherboard but I still need to have AGP and SATA.
Barton 3200 core proc.
System has ran fine for a solid year until I tried new memory. Please help!

Quote from: freakytiki4u on 07-November-06, 23:42:33
Ok I tried to use relaxed FSB by -10 and relaxed mem timings but still unstable due to the motherboard trying to use dual channel memory. If you can modify the bios to where it will not have the capability of dual channel memory I truly believe it will work. Will u try this for me? I would greatly appreciate it as I am really not ready to spend all the money on new equipemtn when this suits my needs for now.
sure but as i said before this is gona be experimental and risky. Here we go:
MSI K7N2 Delta ILSR Experimental MOD E1(Disable Dual CH ability)
Procedure is automated in best possible safest way to BIOS update.
Prepare a blank diskette in a good condition(newest one etc.)
]execute file under XP will make bootdisk with automated BIOS update procedure. when diskette is ready, reboot PC and boot from FDD(floppy), wait a bit, then you will be asked for final confirmation about BIOS update process, press a key to proceed, after BIOS update is complete, ensure that you got successfully output message from flash program. then power down your PC, remove power cord from the PSU, hit power button several time to drain caps electrify, touch with hands some metal for ES discharge, and Clear CMOS.
pull back power cord, power up your PC, when you see CMOS checksum error,(expected msg) hit F1 to continue to re-build DMI pool data, then reboot and enter in BIOS, LOAD BIOS DEFAULT, and SAFE AND EXIT.
NOTE: Ensure your PC is stable before proceed with BIOS update.
NOTE: Use it at own risk, chance of failure is big, cannot guarantee results and safest as provisional mode which can guarantee it will work stable with features. also cannot test it personally before give you. (don't have mobo anymore)
Using it may end with dead mainboard (BIOS chip re-flash will be required, if somethink goes wrong)

MSI K7N2 DELTA -L (601-6570-020) nFORCE 2 DUAL 400 , RANDOM RESTART PROBLEM (WinXP,Win98)

Machine Specs:
- AMD Athlon XP 2600+ With L2 512 KB (Model 10)
- MSI K7N2 Delta -L nFORCE 2 Ultra 400 (601-670-020) (My AwardBios is updated to v5.7, Using nVIDIA`s O/B Audio and Ethernet Controllers)
- TwinMOS PC3200(CL2.5) 512 MB DDR400 RAM (Desktop Series)
- Samsung SpinPoint (SP0411N) 40 GB 7200 Rpm HDD
- GeForce2 MX400 64MB AGP 4x (Oem Manufacturer)
- Samsung SyncMaster 753s 17" Monitor
- Sony 52x Cd-Rom
- Philips Stereo Headphones
- Windows XP Home Edition Turkish (Service Pack 1 Turkish) , I did all of critical and other updates ,Totally up to date.Device drivers are too...(nForce 3.13 whql International,Forceware 56.72 whql International)
Problem :
- ERROR EVENT : 1003 ERROR NAME : IRQL_NOT_LESS_OR_EQUAL
Original Error Texts:
A problem has been detected & Windows has been shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this Stop error screen, restart the computer. If this screen appears again follow these steps.
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If the problem continues, disable or remove any newly installed hardware or software.
Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components restart your computer, Press F8 to select Advanced Start-up options & select Safe Mode.
Technical Information :
*** STOP: 0x0000000A (0x00000004, 0x00000002, 0x00000001, 0x804F1473)
Beginning dump of physical memory
Physical memory dump complete. Contact your system Administrator or technical support group for further assistance.
After restarting manually from the PC. I get the following message
The system has recovered from a serious error.
BCCode : a BCP1 : 00000004 BCP2 : 00000002 BCP3 : 00000000
BCP4 : 804F1ADA OSVer : 5_1_2600 SP : 0_0 Product : 256_1
C:\WINDOWS\Minidump\Mini042202-01.dmp
C:\DOCUME~1\DANIEL~1\LOCALS~1\Temp\WER3.tmp.dir00\sysdata.xml
And when I check EVENT VIEWER
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 22/04/2002
Time: 5:55:03 PM
User: N/A
Computer: XXX-BOX
Description:
Error code 0000000a, parameter1 00000004, parameter2 00000002, parameter3 00000000, parameter4 804f1ada.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 30 0000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 34 66 00, 804f
0050: 31 61 64 61 1ada
I installed 6 operating systems on my pc (WinXp Home Edition Turkish/English,WinXP Pro Turkish/English,Win98 Turkish/English) and tested it, but every time i meet the same thing (MS Blue Screen Of Death Sux...).I checked the WinXP`s logs and searched for error code`s meaning from microsoft knowledge database. They are saying nothing about this problem but the problem`s root is coming from a bad device driver. It seems to be a generic problem for all operating systems cuz all of them were restarting themselves randomly, before i close "auto-restart on critical errors" option.After i saw some messages on forums , i searched for my RAM maker`s home page then i learned that my RAM is assembled with VIA KT Series and SIS chips & optimized for them. I think nForce is too picky about rams.But i aint sure about where the hell is this problem coming from. If you guys are sure about that is an unsupported ram problem and knew the list of ram marks&models that supported by MSI K7N2 Delta -L ,please help me about this damn problem. Thanks for your help.
Note : I tried Asus Ati Radeon 9200SE 64mb g.adapter (some peoples told me thats about g.adapter), but problem continued.

If I read correctly in your specs I see only 11 Amps on the +12v Rail. Is this correct?
If so, I'd advise a PSU that has at least 18 amps on the +12v Rail, perhaps as low as 16 with the other rails to match as shown currently in your spec.
11 Amps is just way too underpowered for that rig. I am surprised it even boots.
At what point does the BSOD occur?

Msi k7n2 delta vs GIGABYTE nFORCE2 CHIPSET ULTRA400/8XAGP

Is the MSI k7n2 delta a better board the GIGABYTE nFORCE2 CHIPSET ULTRA400/8XAGP
So far i have personally tested the msi k7n2 delta and have had nothing but trouble out of it first i overclocked the amd 3200 and it ran stable and just fine but the odd thing is when i went to restart the computer some time the bio would not beep. so i shut it down and put a volcano 11 on the cpu and not it will not do anything at all
the tried to reset cmos no luck noved the jumper to safe mode no luck and even moved the 133/166 jumper and still nothing
MSI the device you gave me for problem shooting said processor damaged or not put in correct
Tested processor on another computer works just fine
Tested Geil ram pc3200 256 works fine
So i believe the board is shoot
I need to know what to do to fix it if anybody can help or if i should get the GIGABYTE nFORCE2 CHIPSET ULTRA400/8XAGP
thank you

Quote
Originally posted by msi_ole
vicks
I don't agree with your reasoning that 3200+ is "overclocked". It is the faster AMD chip but it has been tested by the hunderds of hardware engineers in the AMD labs to work NORMALLY at this speed.
It was designed and optimized to work at this speed.
In fact its real speed is 2.2G and its performance is comparable with the P4 3.2G (you know the story).
AthlonXP3000+ real speed is 2.15G. This chip has two versions, FSB333 and FSB400.
I know what it is :D
What Im saying is he is having troubles booting because he overclocked it, the 3200+ isnt a good overclocker to begin with, Im not saying its something less and it was overclocked, he did the overclock himself and he may have pushed it too far since it isnt a good overclocker...

K7n2 delta lsr + 3000XP prob

i just bought:
msi kt7n2 delta lsr
512 pc2900
3000XP
450w power supply
winXP
i cannot run the processr at 166mhz otherwise windows either brings up the error send report where it closses the application OR windows just restarts without warning.
my brother just bought the same set up aswell (he had his for crimbo) and hes got the same prob, except when he turns the speed to 166mhz, when windows goes to start he gets a BSOD, so i figure no biggy, just repair windows, as i go to do this before the installation or any questons are asked, he gets yet another BSOD and this happens everytime.
ive been ****ing round with bios options for a while but i aint very good at that ****.
and im running a ti4800 nVidia
i dont know wether to upgrade the bios because
A: i have never upgraded a bios before
and
B: if i were to take the board back hed probaly blame it on me for pratting around with it
so, what you guys reckon, i noticed in one of the topics that 400mhz ram would be needed for a 3000XP upgrade ?

The problems your having can be caused by power supply, memory compatiblitly and a few outer things.
List your power supply amps for 3.3 volt, 5 volt and 12 volt.
The ram is PC2700 it is 333 FSB ram your processor is a 400 FSB processor.
So you have created one problem there. Try running ram as single channel to see if it helps with stablity. Set ram speed to 333 FSB.
Or better yet buy some ram that is on the list of compatible ram 2-256 of PC3200 DDR is plenty of ram for games and programs and will keep price down.
Memory that is matched for Dual Channel will also help.
The newest Bios for the K7N2 Delta ILSR is 7.6 it may help with some ram problems but will not fix the FSB difference.

MSI K7N2 Delta-ILSR Nforce2

A friend on Mine is having problem with his setting up of MSI K7N2 Delta-ILSR Nforce2 mobo. Everthing is installed however, on powering up pc monitor goes into stand by, please note new windows Xp not installed on yet due to no screen cmos output. Any ideas , inorder to get screen working and beginiing installtion process of operating system.
Warmest regards,
PS bit late in UK so i cant come up with any suggestions to my PAL for possible solutions.
Thanks Again
Dr Goosey

What type of video card does he have, what bios is he running. Need details of his components. MOAN GUIDE

HD or Booting problem on MSI K7N2 Delta 2 Platinum

Hi all,
Ive a weird issue which i cant figure out myself. I've 2 HD's..lets call them A and B where A = 60Gb (Master) and B = 80Gb (Slave)
It's is like this:
A and B are connected to the primary IDE-slot. A will boot when set as Master and B wont start booting when set as Slave mode (i mean, it wont show/appear in the first hardware (detection) bootscreen of yer BIOS where it says its present or the so called POST-screen), but if I set B as Master only (A turned off) it will boot.
What also happens is if I disconnect the power of drive B..drive A will boot..and while OS is loaded...I turn on the powercable from drive B and reboot..suddenly out of the blue it detects both HD's and reboots like it should do normally...but when i reboot from than..the same thing happens again..(it wont recognize B anymore)
Sumtime it regonizes both drives and sumtime it just won't and sumtimes just 1 drive..
Another thing, when it won't recognize one or sumtime both drives...the POST-screen gets stuck at the name and version of the BIOS...and where it says: 'detecting IDE drives...' when it is at this stage..and I press on the DEL-key for example..it's loading damn too slow..I've to wait about 10min before it enters the BIOS-setup..
I am 100% sure I set the jumper correctly for Master or Slave mode on my HD..I know there's sumthing wrong..but don't know where...Ive changed the jumper with a new one ..switched IDE-cables...switched HD's (set B as Master and A as Slave and vice versa, knowing there is no active partition on B..but only to check if it recognizes the drive)..in all cases..the BIOS settings are set as default!
any1 can help me out with this?
It worked smoothly on my system till i noticed my second MEM bank of my mobo broke (Asus A7N8X-E)..so i had to change it quickly (and went to the store with my warranty to fix this board..it was only 3 months old) ..since I've seen/had enough Asus mobo's in my life I went this time for an MSI which looks better in my opinion...so now i have an MSI K7N2 Delta 2 Platinum..it works fine...except that HD issue mentioned above
any help would be appreciated..thnx in advance!
cheers!

Hi,
I've done that already several times...it doesnt work..any other suggestions?
Now I can boot normally when I disconnect the power of the 2nd HD (or just any HD)...when the os is loaded...I turn back on the power of the 2nd drive and reboot...than it will run/boot/restart etc..normally...this is the only workaround I have at the moment...this only works when the system is turned a long time...
My power supply is 400W..so I don't think Ive any prob with that
cheers

How to reduce from 5º to 8ºC CPU Temp on your MSI K7N2 Delta!

I've installed this tweak last week and it is working very stable since then. It decreased my Idle CPU Temp from 42º to 36º and Overload from 54º to 48º:
Just go: http://forums.pcper.com/showindex.php?t=280137
AMD ATHLON XP 2600+ 12.5x333mhz 1.65V ~OC 11.5x400mhz 1.55V
Thermaltake Volcano 9
MSI K7N2 Delta L
MSI GF4 4200-8X graphics Card
160GB Maxtor HDD 7200rpm
768MB Samsung DDR3200
LG 48x24x48x/16x CDROM/DVD Reader
Dual Fan 450W Troni Power Suppy

It seems that the link to the tweak is broken, I've found another one:
http://ftp://ftp.vector.co.jp/pack/win95/hardware/other/wpcre14.exe
This is what the article say:
Just tried it for the first time..It works GREAT
My idle temps are now 26c, down from 34c. That's 8C. I can have Winamp, IE and messenger running and CPU temps don't get by 29c. Once i fire up, SETI though...I get back my regular Load temps at 39c.
Some of you probably know about it, already....here's for thousand others that don't.
This tweak can drop your idle CPU temps down as much as 8c, maybe more...depending on your system.
First thing you need to do is download WPCRSET & WPCREDIT.
They're both in this zip.
- Extract to a directory.
- Run "INSTDD.EXE". Click Install. When done, you will be prompted for restart. Hit Yes! -
- Then go back to the folder with extracted files, and open "WPCREDIT.EXE"
- A ms-dos like window will pop-up. Move the blinking block (with arrow keys or your mouse pointer) until it says Offset 6F at the buttom. Now, click on the two digit number where it says "HEX", and change it to 1F (The Hex for Offset 6F would have previously been 9F, 8F or something else). Hit Set.
Your idle temps should now start falling.
You would have to do this hack/tweak everytime you rebooted your computer if it wasn't for WPCRSET.
- Go to directory and run "WPCRSET.EXE"
- Look at the top of the window: Enable select "Start" and make sure Device is on "enable"
- Then click Add. Enter 6F for the register, and 1F for the data
- Click Ok and you'll be prompted to restart.
Once, you rebooted, open WCREDIT again and see if the 6F register is still on 1F. If it is, then that's it..You're all done.
Here's a Screenie of how it should be:
This only brings your idle temps down, and not your full load temps
It should work for all nforce2s, and use at your own risk
Check your nf7-s for CPU Disconnect. Most other nforce2 motherboards do not have this feature in the bios...so this tweak might prove useful.
READ THE WHOLE THREAD BEFORE TRYING THIS!
If you run a Distributed Computing project...then obviously this would be of no use to you
Quote:
Originally posted by Abducted on 12-16-2003 at 03:43 PM
It activates the C1 (and maybe the C2) function Athlon XP CPU's support. Most mainboard brands have this feature as an option in the bios you can enable and disable. I just found out that EPoX doesn't have that feature. So what you're doing is just using a direct reg tweak to activate it. It's not like you're forcing anything, the Athlon XP chips are made to support this feature so it shouldn't do any damage.
When the CPU is idle the mainboard will send a command to the CPU that will cause a part of the CPU to be deactivated (and therefore not produce any heat). That's why this tweak only works on the idle temp and doesn't change anything on the load temp. Ofcourse as soon as the CPU power is needed the deactivated part will become active again, so it should have any influence on the performance of the CPU.
Strangely, my full load temp has decreased 6º C degrees too.

MOVED: MSI K7N2 DELTA Motherboard

This topic has been moved to Overclockers & Modding Corner.
MSI K7N2 DELTA Motherboard

Hi
Yes, you can overclock the processor and ram but the best combination is running the ram at the same speed as the processor.
Go into the profile section at the top of the page and list all of your system info like I have mine listed.
Your questions would receive a lot more answers in our overclocking and modding section since there is a lot more info that is needed to help you achieve a good stable overclock.

MSI K7N2 DELTA Motherboard

hi i just got a msi k7n2 delta motherboard from a good friend of mine few days ago and got me 2 sticks of Corsair XMS Twinx 1024-3200Pro ram and a amd xp 2400 + processor and i was wondering if it would be safe to over clock the ram and processor i have on this board.

Hi
Yes, you can overclock the processor and ram but the best combination is running the ram at the same speed as the processor.
Go into the profile section at the top of the page and list all of your system info like I have mine listed.
Your questions would receive a lot more answers in our overclocking and modding section since there is a lot more info that is needed to help you achieve a good stable overclock.

I NEED BIOS MODDED MSI K7N2 DELTA 2 LSR

Similar Messages

Maybe you are looking for