I need boot disk for Mac mini

I accidentally must have formatted my hdd while trying it partition for win 7. Now I need a boot disk. How do I get it up and running again?

Hello,
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

Similar Messages

  • How to eject boot disk from mac mini

    I have a 1.66/duo mac mini on 10.4.11. I trying to upgrade to 1.5.4, but the installation procedure said that it was impossible on this computer. Now I cant eject de 10.5.4 installation disc

    Welcome to the Apple discussions.
    After you get the disk out of your computer, is the disk a grey disk from another Apple system? If yes, you won't be able to use it to upgrade, as you need a black retail disk. The grey disks are locked to the systems they are manufactured for and identified on the label.

  • External boot disc for MAc Mini

    Please forgive the naivety of this question but if some one could confirm this once and for all in simple terms I would be grateful.
    I want to have an external hardrive on which I can place OSX so that I can boot from it, rather than the Mini's built in drive, not least so that I can run the disc utility on the built in hardrive. My question is does this external hardrive have to be USB or Firewire or does it not matter? My Mini is an Intel Duo with 2GB RAM running 10.4.9.
    Thanks for any suggestions
    Matt.
    Mac Mini intel dual 2GB RAM OS10.4.9   Mac OS X (10.4.9)  

    Presumably this GUID thing also explains why my
    current Lacie 500Gb mini hub won't let me load OSX
    onto it as it isn't GUID partitioned just HFS+
    formatted straight out of the box?
    That's exactly right, yes. Since it's not a bootable volume as far as your mini is concerned, it won't give it as an option to install MacOS on it.
    Incidentally, once GUID partitioned, you don't have to actually INSTALL MacOS if you want to use it in place of your internal drive. You can use CarbonCopyCloner or SuperDuper! to clone the internal to the external as a complete single operation, which will leave you with a bootable external that is an exact duplicate of the internal drive. After that, once the external has been tested out, you can then remove whatever you wish from the internal drive, or use it as a backup for the external.
    Either/both CCC and SuperDuper! can be downloaded from www.versiontracker.com.

  • SSD or spinning disk for Mac Mini server?

    I'm using a Mac Mini 2cd as a media server (operating over wifi), and the hard drive is dying - I'm going to replace it, and was thinking of an ssd (the os is on this drive, the media is on a large external). Would this provide any real world speed increases?
    Thanks!

    I would just run with a standard hard drive then they are much cheaper. You can get a 1TB for about $84
    I have an old G4 Xserve that I use to use for that. But, it is just sitting somewhere collecting dust now.

  • Larger disk for Mac Mini 4.1 (mid 2010)?

    Hello,
    Just wondering if there any issues that might preclude replacing my original 500 Gb internal hard drive with, say, a 1 Tb drive?
    Thanks.

    That is fine. The only restriction is the the height of the drive has to be 9.5 cm or less.

  • OS disk lost for mac mini

    Hi
    I have lost my OS disk for mac mini 2007 10.4 and I need to erase the disk before getting rid of it from disk utility
    Is there anywhere I can download a copy from?

    No download, free or paid.
    You can call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a fee, a replacement set of system discs (if available), can be ordered.
    However, the discs will be for the original version of OS, that was pre-installed, when the Mac was manufactured.
     Cheers, Tom

  • I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
    BTW, this is the forum for Adobe Contribute.

  • New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    Hi Erwin,
    Please go through the below forum link and check.
    https://forums.adobe.com/thread/1079210
    Regards,
    Anand

  • I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    It does not look like the Canon driver has change from Mavericks to Yosemite.
    If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
    If you have a new or clean install of Yosemite, see  > OS X Mavericks: Set up a printer

  • For a Macbook Air will I need to buy a mac mini to run additional programs like photoshop and games

    As a graphic design student I wanted to own a laptop that was capable of running Adobe programs and games, but I bought a 2014 Macbook Air; 128GB of storage, 4GB of memory, and runs at 1.4 Ghz. With this information will I still be able to run programs with no problem or will I need to buy a Mac Mini to run all the programs and games that'll be too much for my Air.

    Your MacBook Air has turbo boost up to 2.7GHz >  http://store.apple.com/us/buy-mac/macbook-air?product=MD711LL/B&step=config
    Check Adobe's website for minimum requirements for the apps and games you want to use.
    Turbo boost is a technology integrated into Intel processors that temporarily increases the speed of the processor when needed.

  • After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

  • How to make boot disk for MacBook Pro with Mavericks pre-installed

    Hi -
    I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0).  I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion.  In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk.  In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed).  I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks.  Thanks very much for any help anyone can provide.
    Shelly

    Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
        2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
        3. Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • How to create a Lion boot disk for Lion on a MBPRD?

    I have a unique version of Lion on my MBPRD.  How do I create a Lion Boot Disk for this unique version?

    Why is it a Unique version of Lion? The only versions of Lion are ones for older Macs, Before the Mid 2012 models came out, and a version that includes the newer drivers for the newest model Macs, Current shipping Mid 2012 models.
    If you are talking about a version for the new Mid 2012 models then you will need to wait for Apple to update their Lion Download servers because right now they do not have the newest Lion version available on those servers.

  • How do I make a boot disk for my new iMac?

    How do I make a boot disk for my new iMac?

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

  • Slow boot up on mac mini

    Slow boot up on mac mini using mavericks

    Hello,
    First try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Then...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

Maybe you are looking for

  • How to define your own context in an EJB environment - possibly distributed

    I would like to setup a context (an object accissible per logical thread) in an EJB environment, but I am too unfamiliar with the options I may have. My objective is to create a context in which I may set a value, then invoke a method on an object (w

  • ICal Alarm Window Mostly Off Screen

    When an alarm window pops up I can barely see it. Only a little bit of the window is visible as the rest if off the screen. I can drag it into the screen. It will stay there. But every time a new alarm window pops up its in the same position mostly o

  • Baffled by date query

    It's been awhile since I've done any CF and I'm baffled by the results I'm getting. I want to select all the records where the date is greater than or equal to today. This is with CF8 and an Access database. There are records for 9/25 thru 9/30. I ca

  • Linked Servers Diff Domains server type SQL Server vs OLE

    Ok, we have two different servers ETL03 (2012) and SQL03 (2012 ent). Each on Separate domains SQL03 server has many instances. i have kerberos set up and it appears to be working fine (run SELECT auth_scheme FROM sys.dm_exec_connections WHERE session

  • Oracle VM Migrating virtual disk images to physical disks (block devices)

    Hi, For performance reasons, I'd like to migrate my .img file based virtual disks into physical partitions for VM's. What is the safest possible way to migrate all partitions (including / partition) from a virtual disk to a block device? Thanks, Onur