I need code for this requirement

Hi,
I want to write a program to get personal data and employee address of an employee between two dates.
on selectionscreen i want to display personal number,from date,to date.
Early reply is highly appreciable.
Thanks,
ram.
<LOCKED BY MODERATOR - USE APPROPRIATE TITLES>
Edited by: Alvaro Tejada Galindo on Aug 18, 2008 1:04 PM

by default those buttons will come disable mode .....
u can check any ALV grid programs.....those buttons r in disable mode...
if d user is asking u to enable, then convey him(by showing some existing Grid reports) it is not possible, and show outout by clicking print privew button -> then the output will come in list display,,,those buttons in enable mode...
Note: those buttons r come default enable mode for ALV -LIST display, & diable mode for ALV -GRID display.
ok
Ramesh.

Similar Messages

Need Code for this requirement for generating report

1) Creating interactive reports for sales orders, vendors, customers, and stock available In each type for a particular material, list of purchase documents and vendor performance report that lists vendor name, materials Supplied and actual delivery times, payments terms and prices.
2) Classical Report to display a list of Purchase
Requisitions with details like MRP controller, release date, unit to
Measure along with the standard details, Table used EBAN.
3) Create a list of customer number, Credit limit
To the given Customer. Tables used KNA1, KNKKF1 (Customer Credit table)
Plz help me i need it very urgently....

I always put code in the when-validate-RECORD trigger to ensure fields are entered, rather than setting the property. That way, the user can enter other fields within the record, and then gets a message that the field is required only when leaving the record.
...of course, if the date item is the only field in the block, then the when-validate triggers will not run unless the user at least types a space in the date. In that case, you need to check in the key-commit trigger.

Please provide the abap code for this requirement

note : if the below mentioned user exit is not suitable please find the suitable user exit and provide the code for this requirement.
     The User-exit MEFLD004 is only to be used at PO level (ME21N/ME22N).
     When PO is create or changed (ekko-ebeln) user exit MEFLD004 is triggered which check for the business requirement of the PO check for PO doc types (ekko-bsart) :z4,z6,z11,z12 from the table ekko and Account Assignment Category (knttp) is either N or K then stock process follows.
     When an PO is cancelled, all entries will have to be reversed
     The Buffer table for the PO will have the following fields:
Purchase order Number                     EKKO-EBELN
Line item number of the PO               EKPO-EBELP
Vendor Number                                  EKKO-LIFNR
PO Quantity                                        EKPO-MENGE
PO Nett Price                                     EKPO-NETPR
Base Unit of Measure                  EKPO-LMEIN
Account Assignment Category          EKPO-KNTTP
PO Doc type                       EKPO-BSART
Plant                            EKPO-WERKS
Purchase Org                                  EKKO-EKORG
Purchase Group                    EKKO-EKGRP
Company code                                EKPO-WAERS
Item category                     EKPO-PSTYP
PO Doc Date                     EKKO-BEDAT
     No duplications are allowed for any created, changed or cancelled purchase orders. If such a case occurs, the record will be updated with the latest update time stamp. This custom table will be keyed by purchase order number.

Cross-post: http://forum.java.sun.com/thread.jspa?threadID=763485

Need code for this Small validation on when-validate-item

Hi All,
I have a text item(date datatype) in forms 4.5 I need to do a small validation want to write on when-validate-item. When I enter a date in that text item (Ex 10-JUN-2005) it has to check
1) It Cannot be "blank"
2) It cannot be "Not older than today"
can you please put me code for this small validation. I am new to Forms.
Thanks in Advance,
Reddy

I always put code in the when-validate-RECORD trigger to ensure fields are entered, rather than setting the property. That way, the user can enter other fields within the record, and then gets a message that the field is required only when leaving the record.
...of course, if the date item is the only field in the block, then the when-validate triggers will not run unless the user at least types a space in the date. In that case, you need to check in the key-commit trigger.

Need code for this checkbox trigger...please

Hi All,
I have a checkbox in detail block where block is having No. of records displayed is 3(Three) so Checkbox and all other items are displaying thrice. I am inserting the records 1 by 1 using the following code
Declare
Begin
     Loop
          First_Record;
          Insert into Veri_Test values(:PNo,:c1);
          Exit When :System.Last_Record='TRUE';
          Next_Record;
     End Loop;
     COMMIT;
End;
Its inserting properly. no problem. But what I want is
when i checked on 1st row of checkbox remaining two(2nd,3rd row) checkboxes should be disabled. If i uncheck 1st row checkbox then
remaining two should be enabled. As same way
If i click on 3rd row of checkbox remaining two(1,2) should be disabled. If i uncheck 3rd row checkbox then remaining two(1,2) should be enabled.
Hope its clear. is it possible ? if yes can anyboxy give the code for this checkbox trigger ?
Thanks in Advacne
Devender

Hello,
Apply this in a When-Checkbox-Changed trigger:
Declare
   -- Record being modified --
   LN$CurRec pls_integer := :system.cursor_record ;
   LN$Rec    pls_integer := 1 ;
Begin
   If :BLOC.CB1 = 'O' Then
      -- Goto first record --
      First_record ;
      Loop
         If LN$Rec <> LN$CurRec Then
            -- record <> current record --
            :BLOC.CB1 := 'N' ;
         End if ;
         If :system.last_record = 'TRUE' Then
            Exit ;
         End if ;
         -- Goto next record --
         Next_record ;
         LN$Rec := LN$Rec + 1 ;
      End loop ;
      -- Jump to current record --
      Go_Record( LN$CurRec );
   End if ;
End ;Francois

Need code for this program in pl/sql

Hi,
was looking for a pl/sql code for the following case
If there are two employees from the EMP table. i want all the names of the managers common to the two employees....
to explain in detail : if employee1 and employee2 have the same manager mgr1....mgr1 should be displayed.
else if employee 1 and employee2 have no immediate manager in common...meaning team leader of employee 1 and employee2 are different but the project managers for both the employee is same..in this case the project manager's name should be displayed......
else in worst case when there are no managers common between these two employees.........the CEO who is at the highest level is common....then display CEO's name
it's hierchiacal structure......
thanks,
Preethi

Why PL/SQL? Why not look at if this can be done using SQL firstly? SQL is the preferred language for crunching Oracle data. Not PL/SQL.
Think data sets.
One method to do this in SQL would be to build a hierarchical list of managers for each employee. E.g.
LEVEL MANAGER
1     Jack
2     John
10     Dan the CEOOnce you have such a list for each employee, you can join these two lists on matching names. Then you simply need to find the matching join that has the lowest level.
I'm sure there are other approaches. But unless you put together some test data, put together some SQLs and play around with this problem, you are not going to learn anything.
And no, copying and pasting an answer that someone is inevitable to post in response is NOT learning anything new.
So why not try and solve this problem yourself? Gain some new knowledge. That will only do your career well as your employer is after all expecting you to write the code to solve this problem - and not for members of this forum to supply the code for you.

Need code for this checkbox validation

There are 3 checkboxes on my form cb1,cb2,cb3.I need the code for the below validations..
if I check the checkbox cb1 then cb2,cb3 should be disabled(grayed, should not allow to
check). when i unchecked cb1 all 3 boxes should be enabled and then if i check cb2
then cb1,cb3 should be disabled.
At any point of time only one checkbox should be checked and
remaining 2 will be disabled/grayed.
hope its clear.
thanks in advance
Devender

Hello,
You can enable/disable your check box items with the:
Set_Item_Property( 'item_name', ENABLED, PROPERTY_TRUE | PROPERTY_FALSE ) Built-in.
If Checkbox_Checked( 'chk1' ) Then
Set_Item_Property( 'chk2', ENABLED, PROPERTY_FALSE ) ;
Set_Item_Property( 'chk3', ENABLED, PROPERTY_FALSE ) ;
End if ;
...Francois

Need input for this requirement?

Hi All,
I got new requirement. In this i need to display one world map on that map i have so show blinking star for the customer countries.
if the user click on perticular blinking star i need to display some data.
How to achive this? please help me out.
Thanks and Regards,
Phani Kumar.

Phani,
You can also use Google Maps API .You can find help in below links:
http://code.google.com/apis/maps/documentation/reference.html
http://net.tutsplus.com/javascript-ajax/this-is-how-you-use-the-google-maps-api/
-Suresh

Need Code For This Scenerio

Good Evening,
i am Srinivas V,
My actual requirement is that in a JSP Page I had a Link when i click the link in the new page A Text Box to be there if the word pre defined entered the web page content to be viewed else nothing should be displayed .
Can anyone suggest me regarding this.
Regards
Srinivas V

<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<html>
<head>
<title>Validator</title>
<script language="javascript">
     function test(){
          var value=document.getElementById('t').value;
          if(value=="Hello")
               getFile();
          else
               document.getElementById('t').focus();
     function getFile(){
          var req;
          if (window.XMLHttpRequest){
          req = new XMLHttpRequest();
          }else if (window.ActiveXObject) {
          req = new ActiveXObject("Microsoft.XMLHTTP");
     req.onreadystatechange = function(){
     if (req.readyState == 4){
     if (req.status == 200){
                    document.getElementById('t').style.display='none';
                    document.getElementById('displayDiv').innerText=req.responseText;
req.open("POST", "http://localhost:8080/heloapp/fileupload.html", true);
req.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
     req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
function f()
     document.f1.t1.focus();
</script>
</head>
<body onLoad="f()">
<form name=f1>
     <input type="text" onblur="test()" name=t1 id='t' />
     <Div id='displayDiv'></Div>
</form>
</body>
</html>
this is working BUT not executing the .jsp but just opening the file

Need exact code for this

In the transformation between 0FIGL_O02(table1) and ZSPM_D01(table2), delete records in 0FIGL_O02(table1), if 0AC_DOC_NO AND 0FISCPER AND 0COMP_CODE do not exists in 0FIAP_O03(table 3).
need code for this...i have to implement it in BW.pls give me necessary code.
Moderator message: please do more research before asking, show what you have done when posting, use meaningful titles when posting, read the rules of engagement.
Edited by: Thomas Zloch on Feb 24, 2012

Hai Pavan
Check the following Code
tables : mara.
data : begin of itab occurs 0,
       matnr like mara-matnr,
       mbrsh like mara-mbrsh,
       mtart like mara-mtart,
       meins like mara-meins,
       end of itab.
select-options : S_matnr for mara-matnr.
initialization.
clear s_matnr.
refresh : s_matnr.
s_matnr-low    = '0001'.
s_matnr-high   = '0010'.
s_matnr-Sign   = 'I'.
s_matnr-Option = 'BT'.
append s_matnr.
start-of-selection.
select matnr
       mbrsh
       mtart
       meins
       from mara
       into table itab
       where matnr in s_matnr.
if sy-subrc = 0.
   sort itab by matnr.
endif.
if not itab[] is initial.
loop at itab.
      if itab-matnr NOT BETWEEN s_matnr-high AND s_matnr-low.
     if sy-subrc = 0.
       write :/ 'OK'.
     else.
       write :/ 'Not OK'.
     endif.
   endif.
endloop.
endif.
Thanks & regards
Sreenivasulu P
Message was edited by: Sreenivasulu Ponnadi

Need PL/SQL code for this

Hi,
I need a PL/SQL code for this one...
Let me know if something is not clear...
1) The table CLOB_CLOBJECT_CDA has the columns described below...
Explaining only those fields which are important in this context
-- CDA_STEP_ID : Basically a Sequence
-- CLOBJECT_SOURCE1_ID : Every id has got a set of records
-- CLOBJECT_SOURCE2_ID : Every id has got a set of records
-- LVL : There are total 8 levels..
This is the main aim :
1) There are total 16 million rows..(limited to 10 rows here)
2) We need to go through level by level (LVL column) & insert the intersection records (CLOBJECT_SOURCE1_ID intersect CLOBJECT_SOURCE2_ID)
into another table...but this is how it goes..
Level (LVL column) 3's basically have CLOBJECT_SOURCE1_ID as level (LVL column) 2 CDA_STEP_ID's..
(consider the statement --** where CLOBJECT_SOURCE1_ID = 285 which is same as 1st insert statement step id)..
The above process goes for next levels until 8..(so have to use loops)
So for ex :
We go through the first insert statement and insert the insertion records only when both CLOBJECT_SOURCE1_ID & CLOBJECT_SOURCE2_ID has got records ..
If we don't find any records for both of them we should skip the corresponding step id when we go to the next levels...
Let's go through the 1st insert statement...
-- We have CDA_STEP_ID = 285 & two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 74...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 74 ..(In fact we insert counts into this table only if they have records)
-- If so, we insert the intersection records into CDA_MRN_RESULTS ( we do have counts for both of them..) with CDA_STEP_ID 285...
-- Then we insert the step id which is 285 along with the count into CLOBJECT_COUNTS..
Let's go through another insert statement...
-- Consider CDA_STEP_ID = 288 which has two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 92...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 92 ..(we have records for 19 but not for 92)
-- So we should not proceed with this..& also skip all those records (future records with increasing levels..basically level 3's) which have got 288 as CLOBJECT_SOURCE1_ID..
(As said earlier that the present CDA_STEP_ID will always be CLOBJECT_SOURCE1_ID in the next level)...
I wrote the following code which is after the statement...
Let me have the create & insert statements here..
create table CLOB_CLOBJECT_CDA
    CDA_STEP_ID           NUMBER,
    CDA_ID                NUMBER,
    CDA_SEQ_NUMBER        NUMBER,
    CLOBJECT_SOURCE1_TYPE VARCHAR2(3000),
    CLOBJECT_SOURCE1_ID   NUMBER,
    CLOBJECT_OPERATOR     VARCHAR2(3000),
    CLOBJECT_SOURCE2_TYPE VARCHAR2(3000),
    CLOBJECT_SOURCE2_ID   NUMBER,
    LVL                   NUMBER
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (285, 285, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 74, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (286, 286, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 75, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (287, 287, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 91, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (288, 288, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 92, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4869, 4869, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 91, 3); -- **
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4870, 4870, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4871, 4871, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 93, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4880, 4880, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 91, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4881, 4881, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4882, 4882, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 93, 3);
create table CDA_MRN_RESULTS
   CDA_STEP_ID      NUMBER,
MRN              NUMBER,
INSERT_DATE_TIME DATE
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 4, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 6, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
create table CLOBJECT_COUNTS
CDA_STEP_ID    NUMBER,
CLOBJECT_COUNT NUMBER,
DATE_TIME      DATE
Insert into CLOBJECT_COUNTS values (19,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (74,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (75,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (91,2, to_date('19-10-2011', 'dd-mm-yyyy'));The output goes into two tables...
CDA_MRN_RESULTS : O/p of intersection records between source1 & source2 id
CLOBJECT_COUNTS : Step id with counts ...(useful for skipping next level step id's if either of source id has "0" counts)
Any help is appreciated..
Thanks..

I tried to code this..but looping takes a lot of time..I want to skip certain rows where source1_step_id & source_2_step_id are not in clobject_counts table as we proceed to the next levels..Not sure how to skip the rows..
declare
cursor c1 (p_level varchar2 ) is
Select * from clob_clobject_cda
    where lvl = p_level    ;
   TYPE V_TT IS TABLE OF C1%ROWTYPE INDEX BY PLS_INTEGER;
    L_TT V_TT;
    v1 number;
    v2 number;
    v_step_id number;
    v_operator varchar2(100) := '';
begin
for i in 2..8 loop
open c1(i);
LOOP
       FETCH C1 BULK COLLECT INTO L_TT LIMIT 500;
        FOR indx IN 1 .. L_TT.COUNT
         LOOP
           v1 := L_TT(indx).clobject_source1_id;
           v2 := L_TT(indx).clobject_source2_id;
           v_step_id := L_TT(indx).cda_step_id;
           v_operator := L_TT(indx).clobject_operator;
Execute Immediate ('Insert into cda_mrn_results Select --+ parallel (cm 128)
                                                  distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
                    where cda_step_id = ' || v1 || '
                    and   cda_step_id in (Select cda_step_id from clobject_counts) ' ||
     v_operator ||
                ' Select --+ parallel (cm 128)
                                                  distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
                    where cda_step_id = ' || v2 || '
                    and   cda_step_id in (Select cda_step_id from clobject_counts) ' );
Insert --+ Append
       into clobject_counts Select cda_step_id, count(distinct mrn),
                   insert_date_time dt from cda_mrn_results where cda_step_id = v_step_id   group by cda_step_id,insert_date_time;
   COMMIT;
         END LOOP;
       EXIT WHEN L_TT.COUNT = 0;
     END LOOP;
CLOSE C1;
End Loop;
Commit;
End;

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need code for sql update

HI All,
i have table with data like this
select '[email protected]' mgr, null mgr1,null mgr2,null mgr3,'[email protected]:[email protected]:[email protected]'mgrfull from dual;
1)mgrfull column have with : sepreated email ,here last email split and update to mgr1 column and like this mgr2, mgr3.. Finaly need updated date
required like this see below
----------------------FINAL OUTPUT REQUIRED----------
select '[email protected]' mgr, '[email protected]' mgr1,'[email protected]' mgr2,'[email protected]' mgr3,'[email protected]:[email protected]:[email protected]' mgrfull from dual;
Please give me the code for this...

set linesize 200;
with tab as
select '[email protected]' mgr, null mgr1,null mgr2,null mgr3,'[email protected]:[email protected]:[email protected]'mgrfull from dual
select mgr,
         regexp_substr(mgrfull,'[^:]+', 1, 3) mgr1,
         regexp_substr(mgrfull,'[^:]+', 1, 2) mgr2,
         regexp_substr(mgrfull,'[^:]+', 1, 1) mgr3,
         mgrfull
from tab;
MGR             MGR1                                          MGR2                                          MGR3                                          MGRFULL
[email protected] [email protected]                               [email protected]                                [email protected]                                [email protected]:[email protected]:[email protected]
1 row selected.
update table_name
set mgr1 = regexp_substr(mgrfull,'[^:]+', 1, 3),
     mgr2 = regexp_substr(mgrfull,'[^:]+', 1, 2),
     mgr3 = regexp_substr(mgrfull,'[^:]+', 1, 1);

"You must specify a value for this required field" in SharePoint list

HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinod

hi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Write code for this its urgent

hi its a alv bills of material report plz write code for this
Develop a report to high light the bom and/or master receipes fall into the constrained planning horizon those are not ready for porduction
this report will identity the items with a bom with a status other that 03(ready for production) and/or master receips witha a status other than 04(released). the items will be reveiwed in predefined horizon.
within a few weeks of entering the 18 th week constrained planning horizon.
for this report take bom tables stko,stpo,mast.
in sel-scren take mrp controller, plant, divison.
send immedialtly

Brother this is not the correct way to ask.
In your words you are commanding...
But we have to request the EXPERTS.
WE are in learning stage dont order or command.
Just request them in another way...... then only u get the required reply....
With regards,
Prasad.

I need code for this requirement

Similar Messages

Maybe you are looking for