I need create a lof of files with the same password with Acrobat Standard 9
Good Morning:
I need create a lot of pdf files with password. After I put all files in a directory and with the Acrobat Writer Version 4 selected this directory and the program Acrobat automaticly put the same password in all the files. After as well, I could select files with the same password and changed the password automaticly of this files.
Now with the Acrobat Standard 9, I don't know make this taskes. My cuestion is "Can I make this things with acrobat Standard 9 or I need other version?"
Thank you
Thank you for your help
Your solution is different from the other members' opinion. ¿Is This option available in the Adobe Standard ? Because I have not found it in Adobe Standard.
Your option is with Edit > Preferences > Batch Processing Security Method "Password Security" and the option of the other members is with Advance > Batch Process.
I have tried to change some pdf files that had password with Adobe Pro, so I tried to remove the security password from the pdf files, with Advance > Batch Process.
I created a new secuence with security through the Option "Whithout Password" but when I executed the secuence, the program showed me a window with this message "OPERATION NO AVAILABLE".
¿Can you help me? I don't kown how I can remove the password of this pdfs, yet.
Thank you in advance.
Similar Messages
-
Do XI service users have to exist in the SLD with the same password?
Hi All,
Do XI service users have to exist in the SLD with the same password?
We have a 3 system(development, QA and production) XI landscape with a single SLD. All systems are NW04s with support stack 9.
We are required to change XI service user passwords. I have found OSS note 936093 for changing these passwords. What I am not sure of is if I can change XI service user passwords one system at a time. I am under the impression that XI service users must exist in the SLD with the same password as the XI system. If this is correct, I have to change service user passwords in all three systems at the same time which is not very feasible.
Thanks,
Hamid LashgariCreation and Maintain Users
For the transport of Integration Server content, it is a good idea to install CMS on an
existing Integration Server. In this double-stack scenario, where an ABAP and J2EE
stack is used, user management is different from a J2EE only installation.
Note: For more information about using CMS on a J2EE only installation, see the
CMS documentation.
The following section describes the double-stack user management settings required
when CMS is running on the Integration Server in the development environment. See
Figure 2. The description we provide starts with ABAP user management and is followed
by the maintenance in J2EE User Management Engine (UME). You proceed as follows:
Create the service user LSADMIN using transaction SU01.
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user.
Create the ABAP role SAP_CMS_ADMINISTRATOR and assign this role to the
ABAP dialog user(s) responsible for CMS administration.
In UME, create the role CMSDeveloper with the actions CMS.Display and
CMS.Export.
In UME, create the role CMSAdministrator with the action CMS.Administrate.
In UME, assign the users representing xirepuser and xidiruser to the role
CMSDeveloper.
In UME, assign the group SAP_CMS_ ADMINISTRATOR to the role
CMSAdministrator.
Log on to CMS with the ABAP dialog user responsible for CMS administration.
Maintain the CMS service user (LSADMIN) for the domain.
Task XI Dev
With CMS XI Test XI Prod
Create the service user LSADMIN in TA using transaction
SU01. Yes Yes Yes
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user. Yes Yes Yes
Create the ABAP role SAP_CMS_ADMINISTRATOR and
assign this role to the ABAP dialog user(s) responsible for
CMS administration.
Yes No No
In UME, create the role CMSDeveloper with the action
CMS.Display and CMS.Export.
Yes No No
In UME, create the role CMSAdministrator with the action
CMS.Administrate.
Yes No No
In UME, assign the group SAP_CMS_ ADMINISTRATOR to
the role CMSAdministrator
Yes No No
Log on to CMS with the ABAP dialog user responsible for
CMS administration.
Yes No No
Maintain the CMS service user (LSADMIN) for the domain. Yes No No
Figure 4: Overview of User Management Tasks in Different Systems -
for some reason everytime i got to my membership for pet insurance it says wrong password then i go back to IE 11 and it lets me sign in with the same password...What gives..do I have to have 8 different browsers to get into certain accounts...lol...help
Hi vikadelic,
Do you store your passwords in the browser? If so, you may want to update them to make sure that they are trying to login with the right credentials: [[Password manager - Remember, delete and change saved passwords in Firefox]]
If that is not the case, it may be an old stored cookie: [[Delete cookies to remove the information websites have stored on your computer]] -
Can you delete an iCloud account but then make a new account with the same password?
Me and my mum share the same iCloud account with her email address, but I can't make my own unless I delete my mum's account that I share with her. If I delete the account, will my mum be able to make a new account with the same password?
Thank you!Yes. You can use the same password for all your accounts (although it's less secure to do so). You just have to use a different Apple ID to set up a new account.
-
Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.
-
I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?
Suggest you try the password for the Macbook, not the previous one.
-
I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?
Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps
-
Query 0: Runtime error There is already a line with the same key. with para
Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps! -
We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
Same location. Signal strength is good.Since I couldn't figure out a way to edit our original post, here's another potential clue.
Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not. -
Two users opened the same file at the same time with file on Win2K Server
I just had a problem with a file that could not be saved. After a little investigation I discovered that two users had the same file open at the same time. This is with both users using InDesign CS2 and saving to a Windows 2000 Server. Any ideas how this even happened? The only thing I can think of is if they both opened the file at the exact same time but even that I doubt. I guess the more likely possibility is that the user on 10.5 (which we have had a lot of problems with, it's hard to tell how many of them are CS3 problems (yes CS3) and how many are Windows 2003 Server problems) had InDesign CS2 flake out and not tell her the file was open. Has anybody else seen this? The other user was using 10.4. Both computers have the most recent updates for the OS and for their various adobe products.
I have videos on mov file and my quick time player does not play them.
The MOV file container is the generic QT file container. Any audio and video data compatible with the computer system used to create the file can be placed in the MOV file container. Unfortunate, other systems cannot play the file unless they too are configured with the same components as those used to create the file. The normal procedure here is to use the Finder "Info" or alternative media play "Inspector" window to determine what codecs were used to create the original file and, if they are available for your Mac, install them on your system for playback use. Also be advised that some "legacy" codecs may require playback in the QT 7 Player for proper QT support.
I opened with other players, there is no sound. Then I opened the same file on my windows 7, it plays perfectly with the sound and everything? What is the problem?
This would indicate these players either access your QT codec component configuration which does not include the required codec or the app has its own built-in codec support which does not include the required audio codec but you Windows 7 media player is configured with the required codec support. This may incidate the use of a really old codecs that may or may not be available/supported on a Mac any longer. -
How to get a file in the same dir with the jar-executable
Hi,
I need to read/write a file that exists in the same directory with the jar-executable. How can i do that? I think that when i specify no path for the file, the file has to be in current path. (Is that right?)
Note: I do not know in which directory the jar and the file are.
Thanx in advanceHi,
I need to read/write a file that exists in the same
directory with the jar-executable. How can i do that?
I think that when i specify no path for the file, the
file has to be in current path. (Is that right?)
Note: I do not know in which directory the jar and
the file are.
Thanx in advance
When you specify no path for the file, the file has to be in the directory where the virtual machine was started. ( the directory the java command was invoked in .)
If you can't control the directory in which the vm is started, but you know the name of the .jar file you can do the following. This trick takes advantage of the fact that if you are using classes in a jar file, the name of the jar file must be in your classpath.
public static String getPathOfJar( String nameOfJar )
throws Exception
StringTokenizer st = new StringTokenizer(
System.getProperty( "java.class.path" ) ,
System.getProperty( "path.separator" ) );
String jarfile = "";
while ( st.hasMoreTokens() )
String token = st.nextToken();
if ( token.indexOf( nameOfJar ) > -1 )
jarfile = token;
break;
if ( jarfile.equals("") ) throw new Exception( "Jar not found in classpath" );
String path = jarfile.substring( 0 , jarfile.indexOf( nameOfJar ) );
return path;
//To open a file in the same directory as the sun archive tools.jar
File f = new File( getPathofJar( "tools.jar" ) + "someFile.txt" ); -
How to create links to different files on the same page?
Good day to all again,
can someone please guide me through creating several links to different files on the same page. In other words, I am creating a photo page where my links are called Gallery 1, Gallery 2, etc... I would like to create links so when the User clicks on Gallery 1, they see Gallery 1 slide show in the frame; when the user then clicks Gallery 2, then they see Gallery 2 slide show in the window.
My slide show files are done and I am using GoLive CS2. I have no knowledge of JavaScript or ActionScript/Flash.
Any suggestions are highly appreciated.
Thank you
AlekHi Diana,
I'm a professional photographer and in the process of getting
my finished site published. I used Coffeecup Photo Gallery. You can
create multiple albums on the same page. Do a Google search for the
address. It's easy, inexpensive, and it works. I tried to do this
with the Photo Gallery in DW and FireWorks--but couldn't get it
right. CC uses Flash and Javascript.
Good Luck -
Can we generate the same key with the same password???
Hi everyone,
Is it at all possible to generate the same key? I have a program that takes a user password, creates a key. And this is done in a loop for 5 times. I just wanted to see if the keys that are generated will be the same for the same password. But the keys that are generated are different.
Does anyone have any idea why this would happen?
My Environment
jdk1.2.2
jce1.2.1
My class is very simple as is as follows
import java.security.*;
public class SecureStuff {
static
Security.addProvider(new com.sun.crypto.provider.SunJCE());
public SecureStuff()
try {
Key secretKey = null;
for (int i = 0; i < 6; i++){
javax.crypto.spec.DESedeKeySpec spec = new javax.crypto.spec.DESedeKeySpec("PASSWORDPASSWORDPASSWORD".getBytes());
javax.crypto.SecretKeyFactory desFactory = javax.crypto.SecretKeyFactory.getInstance("DESede");
secretKey = desFactory.generateSecret(spec);
System.out.println("key generated:"+secretKey.getEncoded());
} catch (Exception e){
e.printStackTrace();
public static void main(String[] args) {
SecureStuff securestuff = new SecureStuff();
The Output
C:\> java SecureStuff
key generated:[B@eb7989c5
key generated:[B@e96189c5
key generated:[B@e99589c5
key generated:[B@e8d989c5
key generated:[B@ef4189c5
key generated:[B@eff589c5
Please can anyone help me..
Thank you very very much.
...geethaHi,
I was wondering if you have found a solution to your question.. I justed started working with JCE and have to implement the same functionality. basically I am trying to Encrypt passwords stored in the DB and then when a user logs in, I encrypt his password and compare with the stored password in the DB. For me to do this I have to be sure I can get the same key generated for each encryption.
Also, do you have any examples I can look at or any recommendation on books that explain this subject (JCE) well.
Thanks
Chi -
I signed up for Softcard while i was with T-mobile but now have left and want to use the same account with my Verizon account but i get some Error message. Cant MNO or something
It is a bit annoying when Verizon , ATT and T mobile are all using the same service with Softcard. But if Google wallet is working for you keep it.
-
Create values for analogous periods in the same table with DS
Hi,
in the course of a pilot we want to create additional columns with data for analogous periods.
We have values for a month and need to create new columns for values for last month and last year in order to compare.
Attached youu2019ll find a few sample rows resembling the basic concept of what we have
Region Country Year Month Value
Europe Spain 2009 1 285
Europe Spain 2009 2 129
Europe Spain 2009 3 153
Europe Spain 2008 1 288
Europe Spain 2008 2 284
Europe Spain 2008 3 125
Europe France 2009 1 135
Europe France 2009 2 125
Europe France 2009 3 284
Europe France 2008 1 208
Europe France 2008 2 221
Europe France 2008 3 220
In this case, new columns would be
LastMonth (125 for Spain month 1 year 2009, since this is the value for month 3 year 2008)
LastYear (288 for Spain month 1 year 2009, since this is the value for month 1 year 2008).
Can you help on what function to use in the DS query transformation?
thanks everybody, and enjoy!Hi David,
Probably the easiest way of resolving this would be to add extra columns which show the projected date each row should be shown on e.g.
Region Country Year Month Value LM_Year LM_Month LY_Year LY_Month
Europe France 2008 1 208 2008 2 2009 1
Europe France 2008 2 221 2008 3 2009 2
Europe France 2008 3 220 2008 4 2009 3
Europe France 2009 1 135 2009 2 2010 1
Europe France 2009 2 125 2009 3 2010 2
Europe France 2009 3 284 2009 4 2010 3
This would be written to a staging table then used as a source with the original source file to produce the target table. I've illustrated an example of how this could be achieved below:
Create two dataflows; DF 1 and 2.
In DF 1 read source, add additional columns to show the date (year, month, etc) this should be projected as. This would need to be done for both the last month and last year. Load staging table.
In DF 2 Read the source and outer join to the new staging table twice. Use the region, Country, Year, Month, to join and use the new additional projected date columns. Ensure the last month date fields are used on one staging table and last year date fields are used on the next staging table. The value from the two staging tables is then used in the last month and last year value.
Load into target table.
To calculate the projected date columns you would probably want to format the source fields into a date then add the required number of months. e.g. to_date('01' || month || year, 'DDMMYYYY') + 12
Obviously this would need the stage table to be truncated before each load and you would need to assess your load strategy. When doing these calculated fields if you have any retrospective updates on the source then these would then need recalculating, therefore this assumes it's a complete reload each time.
Edited by: Richard Saltern on Jul 16, 2010 2:01 PM
Edited by: Richard Saltern on Jul 19, 2010 10:10 AM
Maybe you are looking for
-
My iPad just states no printer found with air print. Is this an app that I need and will work with my wireless jet pro 8500
-
Ok...My Ipod is frozen, what next???
My Ipod is frozen. I've tried resetting it. I've tried downloading the updater. I've hooked up to both my computer and USB adapter. I'm out of answers. I only have questions. This Ipod is not that old. It's a 20gb with only 1600 songs on it. What tri
-
Hii, I am using Oracle 11g version 11.2.0.2.0 From last few days i am getting the error ORA-12012: error on auto execute of job 179297 ORA-01403: no data found ORA-06512: at line 1 in my alert log. The trace file details are : Trace file C:\APP\MANAG
-
How do I set Firefox so it opens to my yahoo mail site when I click opening icon??
When I click firefox opening page shows a big google search screen. I want the opening page to show my bellsouth (yahoo) mail. How do I do this? I'm weaning myself from Safari.
-
Hi All, Need some advice here. I have a Adobe interactive form (this is the first step of the process) and i need to prefill it's content from an external service. I have created an external service Callable Object which calls my backend RFC. This is