I need desperate help with Itunes for the SLVR

I have a set playlist for Itunes to take songs from and put onto my phone when it is connected. That playlist has 56 songs, but when I click autofill, it only puts 31 songs down. As I add more songs to the playlist however, it only takes certain ones. For example, for every 7 songs I download into the playlist, it only takes 2 or 3. The phone has tons of space but I don't know, need desperate help, thanks in advance.

i know i have the same problem the only one thing i have noticed that is consistant along with this problem is that songs that will not go on it are all of them have a higher bit rate than songs that do go on the phone but thats the only real thing i can notice so if someone can show me how to lower the bit rate if its possible that might be the miracle cure

Similar Messages

Need desperate help with iTunes and now to report my issue

Hello,
I have just been cleared out of my £70 gift vouchers i received for Christmas by downloading an buying ingame things for something called "Kingdom Conquest"
I have never seen or heard of this game, I had an email saying it was downloaded onto another device that wasnt mine and i should change my password so i did.
Next thing i see is 2 emails saying i purchased 2 X £30.99 bundles. How do i get this refunded and reported. I am very frustrated about this.
Thank you.

Hi P3DR0X.
Don't worry, this sort of thing is easy to take care of. The iTunes Store can oftentimes refund you for purchases such as these. Just connect to them via https://expresslane.apple.com and ask about it.
Cheers.

I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?

I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

Help syncing itunes for the first time

I am trying to sync my iphone onto my itunes for the first time. I am signed into itunes, but when I plug my iphone into itunes, itunes does not recognize that there is a device

Before you connect your iPhone to your computer, go to iTunes > Preferences and check "Prevent iPods and iPhones from syncing automatically."
Or Prevent automatic syncing one time, without changing settings: Open iTunes. Then, as you connect iPhone to your computer, press and hold Shift-Control (on a PC) until you see iPhone appear in the sidebar.
Then, download this program: http://www.wideanglesoftware.com/touchcopy/index.php
It can retrieve your voice memo and there is a free demo.

I need help with itunes for windows 7.

wondering if any one can help? i am running windows 7 and i recently had trouble with itunes it used to open and work, when i recieved my new iphone itunes decided not to open any more i tried un-install and re-install and it didnt work i reset my laptop back to its factory settings and re-installed itunes it worked for that day then went wrong again. i have tried doing apple software update and it comes up with error and some numbers followed by cc. if i try and re-install itunes it says invalid right to use bonjour.
any help? thanks

I have absolutely no idea who Ari is
It appears you do not know how to use this forum
To reply back to Ari, you should have done that on the same thread so that he can see it
Yes, you can call Apple if you are willing to pay for it
Allan

I need help with firmware for the MS-8348 [48x16x48x CDRW]

Well, if Yall could help me I'd be happy.
Ive a 900 Athlon with a pcChip mobo, and an MSI MS-8348 48x16x48x cd-RW drive. HD is primary Master, CD-rw secondary master.
I run XP, but there is a large problem. when I try to install anything from CD, it crashes the system about 1/3 of the way through the install. Games like Sim City 3000 or NeverWinter Nights and such can't install.
I was told that it was a firmware problem, and I needed to update it.
How can I update, when i copy the two files included in the download to c:, run it, and it says my drive is not recognized? It told me to run in real DOS mode, but how can I get there in XP?
Thank you for you help.
Madruga
?(

Hi,
On-Board sound is enabled in bios?????
Also, you will need to update Direct-X for all features too work........
Del

Need serious help with quicktime for windows. PLEASE HELP!!! : (

So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Help getting help with iTunes (or, the elusive product registration number)

My almost brand-new iPOD classic is now useless because iTunes no longer works on my Vista 64. It was fine for a while. Now, when my computer starts up, I get an error message that reads:
iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 14003).
I tried all the obvious stuff, and then decided, what the heck, I'm a paying customer, I'll get some online help for Apple. But much to my frustration and rage, I can't get any help without my product registration number. I can't read the microscopic number on the back of my iPod, and because i can't open iTunes, I can't find my registration number that way. Do you know, you can't even call Apple without the product registration number? So I can't get any help. I'm so frustrated. I got my iPod on Airmiles, so I don't even have a bill.
Is there any other way to find my registration number?

hi dan,
i am using iWeb for a non .Mac account! the reason behind is that external hosters offer better online space and loading times than .Mac. Yet on the other hand, the iDisk, Web-Mail, Addressbook and iCal features that are offered with .Mac make the 99€ a year quite worthy!
i myself do not use .mac because my website is simply to large and the prices are not accepteable that .Mac offers for more space!
the next thing is that your .Mac account username will be in you URL and you cannot stay anonymous! your address will be something like this:
http://web.mac.com/USERNAME
so now you will share your username with the whole wide world! the other thing is that iWeb was designed to work hand in hand with .Mac. This means that some cool feature fall off when you publish externally, meaning to a different host, eg.: 1and1, godaddy, strato. These features include Slideshows, Password-Protection, Blod-Search and other small things!
yet when you still choose to go for .Mac - no one will get your address unless you tell them what the address is! it is extremely hard to find, if not impossible, your .mac address under Google or Yahoo! So your username is somewhat protected!
Here are some good hosters:
http://godaddy.com
http://1and1.com
http://strato.de (german)
you practically have to also see for your country what hosters offer. 1and1 is extremely cheap and is over the world! Yet when you choose to have a external host - then you have to pay extra and if you close your .Mac account you cannot buy music in the itunes store!
here is a very good FTP program to upload your files to a different host:
http://cyberduck.ch
http://karreth.com/iweb/Host%20To%20Other%20Than%20.Mac.html
i hope that helped!
max

Need some help with method for calendar

Hi all,
I've got to design a claendar for college but I'm not allowed use any one the Java calendar classes so I've but up a number of methods to get the start days of months etc.
At the moment I'm trying to get a method working tha will loop around 12 times and assign the days in the month to a string array for printing later in another function but to test I'm printing to screen.
At the moment when I get the days to print on screen It shows me the days for Janurary similar to below 12 times and I've been looking at it so long I can't see the wood for the trees and I was just wondering if someone can point out when I'm going wrong here.
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
The data for the start days and total number of days in a month are held in arrays in seperate methods as well.
With the following code I'm just getting the days for Jan to print out 12 times.
I thnik the the problem is with the first part of the while loop It does not appear to be looping throught the DaysIn and TopLeft arrays as if I manually change the value of the variable l = 1; I get the days for Feb to print out.
           static int [] DaysIn (int y) // return correct day in month
         int [] LDays = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; // leap year.
         int [] Days = {31, 28, 31, 30, 31, 31, 31, 30, 30, 31, 30, 31};
     if (y%4==0 && (y%100!=0 || y%400==0)) // test if y is a leap year. y is gotten from print cal.
         return LDays;
     else
        return Days;
static int [] TopLeft (int y) // find the starting position of the days in a month for printing
        int [] k = StartDay(y);
        int [] TopLeft = new int [12];
        int t = 0;
       while (t!=12)
     TopLeft[t] = 1- k[t];
     t++;
       return TopLeft;
static String [] DispMonthDays(int y) // Method to supply the days of a month in grid form needs work.
     int k = 0; // int to take the topleft value for each month
     int DIM = 0; // int to take the total days in each month
    String MonthD=""; // empty string
     String [] MonthDay = new String [6];
     int l= 0;
               While(l!=12)
          k = TopLeft(y)[l]; // Believe problem lies at these two lines
          DIM = DaysIn(y)[l]; //
            while (k != 42)
             if (k < 1){MonthD = MonthD + " "+" "+" ";}
                                  else if (k >=1 && k <=9){MonthD = MonthD + " "+ k +" ";}
                else if (k >= 10 && k <= DIM){MonthD = MonthD + k + " ";}
                else if(k > DIM){MonthD = MonthD +" ";}
                k++;
          MonthDay[0] = MonthD.substring(0,20);
          MonthDay[1] = MonthD.substring(21,41);
          MonthDay[2] = MonthD.substring(42,62);
          MonthDay[3] = MonthD.substring(63,83);
          MonthDay[4] = MonthD.substring(84,104);
          MonthDay[5] = MonthD.substring(105,106);
     l++;}
     return MonthDay;
static void PrintCal(int y) // function to hand off year and print cal
     int upstep=0;
    int count=0;
    while (count !=12)
          while (upstep!=6)
             System.out.print(DispMonthDays(y)[upstep]);System.out.println();
               upstep++;
          upstep=0;
          count++;
}Any help greatly appreciated

Given the previous valid comment here is my code again.
I'm running the code on the console
   // Months of year
                static final String [] MNames = {"January ", "February ", "March ",
                    "April ",   "May ",      "June ",
                    "July ",    "August ",   "September ",
                     "October ", "November ", "December "};
     static int [] daysIn (int y) // see if y is a leap year and return correct day in month
           int [] LDays = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; // leap year.
           int [] Days = {31, 28, 31, 30, 31, 31, 31, 30, 30, 31, 30, 31};
          if (y%4==0 && (y%100!=0 || y%400==0)) // test if y is a leap year. y is gotten from printCal.
          return LDays;
          else
          return Days;
                static int [] startDay(int y) // Find First Day of a month
          int [] z = daysIn(y);
          int firstDay =((y-1900)*365 +(y-1901)/4)%7;
          int x = 0;
         int [] startDay = new int [12];
         while (x!=12)
          if (x==0)
             {startDay[0] = firstDay; firstDay = (firstDay+z[0])%7;}
          else
             {startDay[x] = firstDay; firstDay = (firstDay+z[x])%7;}
          x++;
          return startDay;
       static int [] topLeft (int y) // find the starting position of the days in a month for printing
          int [] k = startDay(y);
          int [] topLeft = new int [12];
          int t = 0;
                                     while (t!=12)
                   topLeft[t] = 1- k[t];
                                          t++;
          return topLeft;
       static String [] dispMonthDays(int y) // Method to supply the days of a month in grid form needs work.
             int k = 0; // int to take the topleft value for each month
             int dim = 0; // int to take the total days in each month
                        String monthD=""; // empty string
             String [] monthDay = new String [6]; // String Array to take the results of MonthD and be returned 12 tmes
          int loopThrough= 0; // int variable to progress through the topLeft and daysIn arrays
          while(loopThrough !=12)
                 k = topLeft(y)[loopThrought]; // Not being moved through as far as I can see
                dim = daysIn(y)[loopThrough];
                      while (k != 42)
                 if (k < 1){monthD = monthD + " "+" "+" ";}
                    else if (k >=1 && k <=9){monthD = monthD + " "+ k +" ";}
                   else if (k >= 10 && k <= dim){monthD = monthD + k + " ";}
                   else if(k > dim){monthD = monthD +" ";}
                   k++;}
                 monthDay[0] = monthD.substring(0,20);
                 monthDay[1] = monthD.substring(21,41);
                 monthDay[2] = monthD.substring(42,62);
                 monthDay[3] = monthD.substring(63,83);
                 monthDay[4] = monthD.substring(84,104);
                 monthDay[5] = monthD.substring(105,106);
               l++;
          return monthDay;
   static void printCal(int y) // function to hand off year and print cal amended for testing to see if dispMonthDays is working
     int count=0;
     int upstep=0; // int variable to return the monthDay
                      while (count !=12)
          while (upstep!=6)
                  System.out.print(dispMonthDays(y)[upstep]);
                   upstep++;
           upstep=0;
          count++;
public static void main (String [] args)
     Scanner input = new Scanner (System.in);
     System.out.print("Enter a year: "); int year = input.nextInt();
         printCal(year);
              I still think the problem is with the first loop in dispMonthDays

Need some help with all of the jumper settings.

Wow, this has been some ordeal. I inherited a G4 iMac from a friend, which has been a great deal of trouble to me, particularly with the jumper settings. Anybody like dealing with that? Come on down...
So here's my situation. The hard drive in the iMac was dead. No big deal I'll just replace it, so I got a drive which I'm SURE is compatible. I plugged it in paying little attention to the jumper settings on it because until the beginning of this ordeal I knew nothing about jumper settings.
Now this is where it starts making no sense... I booted the computer while holding down the mouse button to eject, then put in a 10.2 OS disc, and then restarted holding C to boot from the install disc. It loaded fine but when I got to the installation step where I pick a drive to install it to, there were NO drives in the menu.
Maybe it needs to be formatted, right? WRONG. From the install screen I clicked open disc utility, and found the drive there in the list. It recognizes the drive, so why can't I install to it? I tried reformatting the drive as Mac os extended or whatever, and this made no difference.
This is where the jumpers come into play. I can't find jumper settings anywhere online for the DVD-RW Pioneer DVR-104PC Superdrive, so I've left the jumper on the optical drive alone and tried toying with the jumper settings on the HD instead, but I tried every possible setting and none of them worked to allow the installer to see my hard drive.
So what do you all think the deal is? If you know what the various jumper positions are for this particular optical drive, by all means let me know so I can toy around some more. Or if you know an alternate solution other than what I've suggested, please share. I've already invested money in a drive, some thermal paste, and Torx screwdrivers for this thing, so I really just want to get it working.... Let me know...

Hey Michael,
Here's the link to the WD support site:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=84
My experience with WDs is that when they need to be "Master single" I use no jumper. That's in most Mac setups including the iMac G4s. Which drove me nutz until I figured that out. All other manufactures I've run into need a jumper across the first pair on the left as you look at it from the back. WD is the odd man out.
Also if you Google:
"western digital jumpers" the 2nd response you get is from OWC (macsales.com) and they're telling you to use the slave setting. Don't know about that I've always used no jumpers but I see a lot of hard drives so next time..
Richard

Help with iTunes for other OS

Hello. I actually am not running this on Windows actually nothing running on atm. I have an Ubuntu machine. I really don't want to pay $100 to microsoft just to make my computer feel slow and get iTunes. Does anyone see iTunes coming out for Ubuntu in the near future? Is there a way to get it or an alternative? I really would love iTunes for Ubuntu and I think many people would. I'm tired of having to keep two operating systems I want to scrap Windows 7! Thanks.

i know i have the same problem the only one thing i have noticed that is consistant along with this problem is that songs that will not go on it are all of them have a higher bit rate than songs that do go on the phone but thats the only real thing i can notice so if someone can show me how to lower the bit rate if its possible that might be the miracle cure

I need some help with my ipod-the screen is frozen on do not disconnect

this morning i went to sync my ipod with itunes to update it but when i plugged it in to my computer it said do not disconnect but the screen froze before it even connected to itunes.... now the screen is frozen on do not disconnect and the ipod won't even turn off. anyone have any suggestions?

Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

HT4528 hello, i need some help with turning off the 'find my iphone'

I just traded in my iphone for the 5s and Verizon is having some problems deactivating the find my iphone thing on my old phone however it still has it linked up with my old email address that was stolen from me, how do I reset it so I can use my current email address to use my current password?

There is a link to download App Builder when you sign in to the DPS Dashboard (http://digitalpublishing.acrobat.com). There is also a link on the DPS install help page.
http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml

Connecting a used iPhone with iTunes for the first time

When i bought my 5s end of last year i switched it on coming out of the box, without connecting it to iTunes. I started making back-ups to iCloud.
Now i want to connect it to iTunes to make a back-up, but iTunes thinks it's a new device and only proposes me either to restore an old back-up, or to start using the device "as new".
I'm afraid of losing everything chosing that last option, and the last back-up on my iMac must be one of my iPhone 4 so i wouldn't want that either.
Now how can i make a back-up with iTunes in that case?

not sure if you read what i wrote..
iTunes only proposes me to either restore an old back-up, or to start using the device "as new".
So it's not possible to click any backup button in this case

Problem with iTunes for the mac

1. I can only see a small portion of the bar at the top. All of the buttons look messed up. I reinstalled but it didn't help.
2. the music section only shows a small portion of the songs in my library When I turn on the share option it shows all of the songs but most of them are in the cloud and it won't let me transfer any of them to my iPod nano.
3. How do I take all the songs out of the cloud and put them all back on my computer? when I turn off share it only shows the songs that are not in the cloud.
thanks I am using a new imac

You can't track your iPod through iTunes. If you enabled 'Find my iPod' then you can look for it from the iCloud website using your apple ID.

I need desperate help with Itunes for the SLVR

Similar Messages

Maybe you are looking for