I NEED DLT support, can I install only Encore 5.5 along side CS6??

I need DLT support (dropped from CS6 thru some brain-fart by Adobe), can I install only Encore 5.5 and not the rest of the Creative Suite without interfering with CS6? I need to master dual-layer DVDs to DLT tapes and CS6 does not support DLT anymore. For single layer DVDs I can create them in CS6 and master the ISO out to tape on another computer running Encore CS2, but that method doesn't support dual-layer ISOs, they have to be mastered to DLT directly from Encore.
I do not use dynamic link and am fine with using CS6 to get the video ready for conversion to MPEG and AC3. I just don't want to mess up CS6 and don't want a lot of crap I won't be using (the rest of CS5.5) laying around on my hard disk waiting to foul me up in some way in the future.
Anyone done this, heard of it being done, etc?
If I need to I'll revert entirely back to CS5.5, but I REALLY like CS6 except for the one disaster where DLT mastering support was dropped out (a move which may truly be a deal breaker on CS6 for me).
Thanks,
James

No problem installing CS6 over CS5 and/or CS5.5.
I did not find anything in the PR forum right off to give us an example of CS5.5 over CS6. CS4 over CS5 was a problem, and I developed the general belief that one should not install a lower version after a higher. It is not always a problem, but I don't trust it.
I have CS5, CS5.5, and CS6 installed together with no problems. But I installed in that order.
If I were you, I'd consider biting the bullet, uninstalling CS6 (with all the cleaning etc), and then install CS5.5 and then CS6.
Alternatively, do a fresh install of your whole system.
If either of those two reinstalls, you could install CS5.5 over CS6, and let us know how you fare!

Similar Messages

Need help I can't install windows 7 to my SATA HD

need help I can't install windows 7 to my SATA hard drive, when it gets to the part of selecting a drive partition to install windows it tells me my hardware does not support booting to this disk check that the disk's controller is enabled in the bios settings, I can't find any AHCI mode to switch to and RAID also did not solve my problem, bios version 786F1 v01.04

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can I install only iPhoto 7 and continue to use my other iLife '06 apps?

My mac Mini does not meet all of the system requirements for iLife '08. Can I install only iPhoto 7 and still use my old iLife apps like iMovie?

Here's a link to the iPhoto support page http://www.apple.com/support/iphoto/. At the bottom left you'll find the system requirements for IP 6. It looks like you're within range as far as the OS requirement and computer model. IP 6 should just upgrade your older version. If you want to install just iPhoto, there should be a "Custom Install" option in a drop-down menu. Choose that (instead of the default "Easy Install") and select what you want to install.

Hi, how can I install only iTunes movie watcher when only iTune is installed ?

Hi, how can I install only iTunes movie watcher when only iTune is installed ?

Please stop being impatient.
What do you mean "iTunes movie watcher"?

Can still install PS CC on 2 computers like CS6.

Hello,
Can I install PS CC on 2 computers like CS6. Under the old CS6 agreement I could install PS CS6 on my main desktop computer and have another copy on my laptop computer for use when I travel. Is this still possible with PS CC??
Thanks
David

Is this still possible with PS CC??
Yes, still possible.
Refer Getting Started section at http://www.adobe.com/products/creativecloud/faq.html
"Can I use the software I download from Creative Cloud on multiple computers?
Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information."
One extra advantage with Cloud software over perpetual licenses is that the Cloud license is not operating system dependent. So you can install it on Mac/Mac, Win/Win and/or Win/Mac.

I have just bought an iBook G4 and need to know can I install iWorks 09?

SOS Helpppppppp
I have just purchased iBook G4 and really need to have iWorks on this machine, can I install iWorks09 on it??? plus any handy tips for the iBook would be much appreciated.
Thanks in advance

Mac computer with an Intel, PowerPC G5, or PowerPC G4 (500MHz or faster) processor
512MB of RAM; 1GB recommended
32MB of video memory
Mac OS X v10.4.11 or Mac OS X v10.5.6 or later
QuickTime 7.5.5 or later
1.2GB of available disk space
DVD drive required for installation
If you Mac meets these specs then yes.
Allan

How can I install only OS on SSD and have the HDD only for apps?

I am looking to buy an SSD and install it in my CD area of the macbook pro with an adapter. But I wanted to know if it's possible to instal only my OS on the SSD and have the HDD only for Apps/Software....Is this possible and if so how can I do this?

I suppose you could do this by just installing Mountain Lion onto your SSD, and then move your applications folder and documents to the HDD.
But I would be wary of doing this because:
It seems like it would defeat the purpose of having a SSD, that is to make your computer fast. The computer would have to switch back and forth between the SSD and the HDD. Sounds like that would unnecessarily complicate things.
I like to keep things simple. I think the software engineers at Apple know what they are doing and I just keep things installed simply and the way they intend them. Then they seem to work. I put a SSD in my laptop about a year ago and it works perfectly. I haven't had a problem with my computer in a very, very long time.
This doesn't mean that you can't have a lot of files stored on a secondary drive somewhere, whether it is on an internal or external drive. But I'd keep the system software and apps where they belong, on the drive where the installer puts them.
And this doesn't mean that you can't try your plan and see how it works.

Qosmio G30: How can I install only Ulead Dvd movie factory from Recovery image

Hi everybody
I have question about Ulead dvd movie factory.
First, I bought my G30 with XP when it was the moment of the offer "vista for a few euros".
So, I installed Vista with the official CD from Toshiba. But there was no longer Ulead Dvd movie Factory. As the XP's restoration CD is only an image disk, I can't install from it.
Has anybody a solution for me?
Thank's.
BR.

I think there is a solution!
I found the Ulead DVD Movie Factory utility on the Toshiba page.
I searched in the Qosmio G30 area but without to be successful.
But I checked other sections and selected Satellite Satellite A series Satellite A200 (PSAEC) Vista and found the Ulead DVD Movie Factory 5.51.0147.03 version
Download it a try to install this tool.
Should works!

K8N Diamond Plus, Vista needs SATA Drivers, Can't install

I'm trying to install Vista, but it is asking for the Silicon Image SiI 3132 SATALink Controller Drivers. I'm having no luck find this driver, and as such I can't install Vista. Anyone able to help me out with this ?

use those.

Problem installing ONLY Encore CS6 alongside CC

With the new 2014 CC apps alongside the original CC apps, I decided I finally wanted to purge my CS6 collection. However, I still want and use Encore from time to time.
I used first the "uninstall" option to remove ALL of my CS6 apps - including Encore. I even used the Cleaner tool to further "clean up" CS6. All seemed well.
I then followed these instruction precisely to install Encore, which involves installing the "previous version" of Premiere Pro CS6 through the CC desktop app, and then using "uninstall" to remove only Premiere Pro CS6. http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
Everything seemed perfect. I had only Encore CS6 appearing in my Application folder (Mac). However, in the CC desktop app drop down window (after logging out and then back in), there was a listing for Premiere Pro CS6 and a big blue button saying "update". "What's this" revealed bundled updates for not only Encore, but CS6 Bridge, Media Encoder and Extension Manager.
So - my choice, stare at an unresolved "Premiere Pro CS6" update for the rest of time, or hit the button. I hit the button, and got CS6 Media Encoder, Extension Manager and Bridge reinstalled back on my computer. Right back where I started.
The instructions at the link above are INCOMPLETE. What do I do to resolve this problem? I just want Encore - and not the gigabytes of CS6 programs I no longer need.
Thank you.

I do not know the real answer, which is can you uninstall ALL CS6 except for Encore.
My guess is that you must live with the "update" flag staring at you. The update did NOT put Premiere back in, so I assume that those 3 programs are considered "essentials" for the CS6 family. Even though we don't know how, they may be essential for some part of Encore's functioning. My guess is that the PR CS6 install put them in, the uninstall does not remove them unless you remove everything, and that they had updates.
You may have needed the update to get Encore to 6.0.1 (the only Mac update for Encore CS6). Or you may be able to manually update with an update file. Adobe - Encore : For Macintosh : Encore CS6 update
In any event, these are small programs. Well, hm, 3/4 of a gig. You should really transcode assets to DVD/BD spec before bringing into Encore, so it doesn't matter, but for some projects I will use the dynamic link with AME to transcode ahead of the build. Slight advantage to keeping it.
But for your interests, my bottom line is to live with the "update button."

I'm user Adobe CC. Can I install Adobe Encore CS6 for free?

I've a license Adobe Creative Cloud since August 2013.
I want to install adobe encore but I don't know how...
I read in the Adobe site that I can download and install CS6 without a license problems. My CC license is valid to download and install CS6
In principle only need Adobe encore, it's only in CS6 Pack, in CC it's no longer...
How I can do?, what I need to do?
Thanks in advance and sorry for my bad english

CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
-a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-also http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
CS6 Stuff Plug-ins
http://blogs.adobe.com/premiereprotraining/2012/05/plug-ins-and-third-party-hardware-for-p remiere-pro-cs6.html
You also need to download the content
-link in http://forums.adobe.com/thread/1276002
-more on folder structure http://forums.adobe.com/thread/1065117
-and Cloud confusion http://forums.adobe.com/thread/1029098
-How to Extract the Library content to the Library folder
-Extract the zip file that you just downloaded. This will create a .7z file
-Extract the .7z file to create a folder based on the language you selected.
-Copy the contents of the language folder (eg. en-US) to the following location:
-Windows: C:\Program Files\Adobe\Adobe Encore CS6\
--Library folders will replace the existing Library Folders & Files
--Place into Windows: C:\Program Files\Adobe\Adobe Encore CS6\Library
--you will now see "many" sub-folders under the Library folder

Can I install only Windows on my Macbook Pro 2009?

Hello All,
For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
However, my question is - will this work?
Thanks
Craig

As TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp. BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere). Virtualization runs in OS X, so that should be a non-issue. Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X.

Can I install ONLY Compressor 1.2.1 without reinstalling FCP 4.5?

I need to reinstall Compressor 1.2.1 (the earlier version before I update) because of the dreaded "cannot connect to background process" (paraphrase) error. I can get to the custom install screen and uncheck everything except Compressor, but I can't uncheck the FCP app itself. Do I have to reinstall FCP, too, just to reinstall Compressor?!?!
I have 4.5 HD and am using a G5 dual 2 (NOT Intel) with 1.5GB of RAM, and am running OS X 10.4.8.
Thanks in advance...
Lloyd

Thanks... just one more quick question:
After I re-installed Compressor 1.2.1 and restarted, I got an error message saying "An item in the Startup Items folder ("/Library/StartupItems/Qmaster") does not have the proper security settings." and then the rest of the message... My question is, do I need to have Qmaster running if I'm not using a cluster? It seems like no matter what I do now, I can't get Compressor to work (reinstall it without my Ethernet cable attached, reinstalling only the Compressor .pkg file/bundle, etc.). Do you have any idea what I might be doing wrong or what I have to do to get this to work? I tried to bypass Compressor and let DVDSP 3.0.2 handle all the encoding, but no matter how low I make the MbPs, I still get an error message that it's too high. I also have chapter markers, so I'm not sure of a work-around.
Again, I'm using the FCP 4.5 HD package. Is this common? I'm thinking of using iDVD...it's not as professional, but at least it works.
Thanks,
Lloyd

IPod Nano 6g not syncing - Apple Mobile Device Support can't install

i recently got iTunes working again on my computer. my grandfather wanted me to sync his old iPod Nano, so i did that and it worked fine. i then tried to sync my own iPod Nano 6g, and it gave me the error:
"An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again.
If the problem persists, uninstall iTunes, then install iTunes again."
i tried reconnecting the iPod, of course, and then tried reinstalling iTunes, but the same error kept coming up. if i closed iTunes, then connected the iPod, i could find it in My Computer, but after opening iTunes it would give me the error and eject itself. i then tried all the stuff outlined here:
http://www.apple.com/support/itunes/ituneshelp/?kbase=TS1363&viewlocale=en_US
but that didn't help. i tried plugging the iPod into the USB ports at the back of the computer, but nope.
i soon discovered that Apple Mobile Device Support wasn't running or installed on the computer, and that that may be the source of the problem. however, i looked in my C:\Program Files\Common Files\Apple folder and there was a Apple Mobile Device folder. it didn't appear complete, though, as there wasn't the 'bin' folder needed to run AMDS properly. i renamed this Apple Mobile Device folder, adding an 'OLD' at the end, so as to not interrupt any times i would try to install AMDS in this folder properly.
i first tried a simple complete uninstall then reinstall of iTunes, but i noticed during the install that when the installer got to the stage of installing Apple Mobile Device Support, it would stop and then say 'rolling back action' and the loading bar would move backwards, before installing the rest of iTunes as normal. hence, AMDS was still uninstalled and my iPod still wasn't being recognized by iTunes.
i tried extracting the iTunesSetup.exe file, and then running the AppleMobileDeviceSupport.msi file separately, but it would give me the same rolling back action thing and it would end in 'installation interrupted, system was not modified, please try again later'. tried disabling my anti-virus then installing iTunes, then disabling my anti-virus and running the AppleMobileDeviceSupport.msi separately but nothing was different.
please help. why is Apple Mobile Device Support not installing? and is this actually the reason why my iPod is not syncing with iTunes? any insight would be appreciated. thanks.

i first tried a simple complete uninstall then reinstall of iTunes, but i noticed during the install that when the installer got to the stage of installing Apple Mobile Device Support, it would stop and then say 'rolling back action' and the loading bar would move backwards, before installing the rest of iTunes as normal. hence, AMDS was still uninstalled and my iPod still wasn't being recognized by iTunes.
On rare occasions on Windows XP systems, I've seen that effect produced when there are old files/folders for the netaapl.sys and usbaapl.sys drivers stuck down in your Windows Operating system folders. If that's afoot, the following (somewhat involved) procedure may be of some assistance:
http://discussions.apple.com/thread.jspa?messageID=11493765&#11493765

Love, need Photoshop, but can I install it? Can CS4 install on 64bit OS?

Please, please help... This past year I have had a tough time with the installers for SC4 working on my new computer at the time. I paid a programmer to custom write new installer... which worked!!!
Now however, my PC sound isn't working and need to do a system resore... don't want to pay this guy to do rework on the installer drivers again... does anyone know if CS4 has new - working install drivers (Adobe support was not able to help)?
I ask first because installing the CS4 without my tech guru the partial install of CS4 would not uninstall - requiring a system restore at the time.

Hey there, I got a copy of System Requirements for both WINDOWS and MAC platform . . . . Hope this could help . . . .
Windows
1.8GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and 32-bit and 64-bit Windows Vista)
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
DVD-ROM drive
QuickTime 7.2 software required for multimedia features
Broadband Internet connection required for online services*
Windows 7 compatibility
Mac OS
PowerPC® G5 or multicore Intel® processor
Mac OS X v10.4.11–10.5.4
512MB of RAM (1GB recommended)
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
DVD-ROM drive
QuickTime 7.2 software required for multimedia features
Broadband Internet connection required for online services*
Mac OS X Snow Leopard 10.6 compatibility

I NEED DLT support, can I install only Encore 5.5 along side CS6??

Similar Messages

Maybe you are looking for