I need driver XP on Macbook pro

I installed XP on Macbook Pro By Parallels Desktop so how can i get the driver ?
Help me !

What driver? You have Parallels. You have Windows XP disk.

Similar Messages

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7.  I need it for my MacBook Pro 13", 2012, running Mountain Lion

    Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7.  I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp.  I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..?  I'd like it to work with both operating systems, using the built in hardware encryption.  Thanks

    This article may help: A flashing question mark appears when you start your Mac.

  • I just changed the hard drive on my macbook pro 13" and it won't turn on. I need to put the latest operating system on it.

    i just changed the hard drive on my macbook pro 13" and it won't turn on. I need to put the latest operating system on it. It had OS8 on it

    dtrewitt wrote:
    It had OS8 on it
    Ummmm no it didn't.  iOS only runs on iPhones, iPads and iPods.

  • Do I need to install virus protection for the windows portion of the partitioned hard drive on the MacBook Pro?

    Do I need to install virus protection for the windows portion of the partitioned hard drive on the MacBook Pro?

    You are running Windows, so yes. I like Microsoft's built in protection and how 8.1 is 'hardened' but I also install Malwarebytes. I will not use Kaspersky anymore. But you do need something. And 8.1 is more secure than prior versions definitely but there were some major zero-day security updates on this month's "Patch Tuesday."
    The forum for you is "Boot Camp" and this if you look above: Communities / Desktop / Mac Pro is not for MacBook Pro
    MacBook Pro
    Boot Camp

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

  • I need to have my macbook pro repaired how can I hide passwords and banking info?

    I need to have my macbook pro repaired how can I hide passwords and banking info?

    Create a new admin account named repair and only give them the password for that account. Alternately you could back up or clone your system, erase the hard drive and then reinstall OS X with one admin account that has no personal information.

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • Disc Drive problems on Macbook Pro

    My disc drive on my macbook pro has recently been skipping over certain parts of movies, telling me that it's "refreshing the disc drive", and is now not responding when I insert a disc. I get the dreaded color wheel as a mouse, and i have to force quit DVD Drive. Any suggestions would be greatly appreciated!!

    Take it in for service. The drive may need adjustment.

  • I have a Lacie hard drive which my Macbook pro doesn't recognise any ideas why and can I solve this problem?

    I have a Lacie external hard drive which my Macbook Pro doesn't recognise is there a soloution to this as I have work files that I need to access?  Thanks

    Hi..
    Open the Finder. From the Finder menu bar top of your screen click Finder > Preferences > General
    Make sure:  External disks   is selecteed.

  • Trying to install a SSD Hard Drive on a MacBook Pro.

    I'm trying to install a SSD Hard Drive on a MacBook Pro as the original one has failed. How do I install the Operating System onto it?
    I've read that you have do it through System Recovery

    New disks Do Not contain Recovery partitions for OSX, your advice is incorrect. Check before you post next time.
    The OP's machine may need to be reinstalled from discs rather than recovery, but without knowing the age of the Mac that is a guess.

  • I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

    i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.

  • Can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid".

    Hi, anyone know. can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid". any compatibility issues?

    "In addition to TRIM, I just stumbled on this discussion. One of the posters is having some odd difficulties with that combination."
    Yup and that's why I've avoided any 3rd party SSDs.
    I only deal with:
    http://eshop.macsales.com/shop/SSD/OWC
    I've done 6 so far and no problems at all; formatting, installing nothing. Total no brainer. I did have a small formatting problem on my last one but I called them and solved the problem before the guy got on the phone. He immediately offered a return sticker (RMA) but I didn't need it and the MBP is running fine.

  • Installing a better Hard Drive in my MacBook Pro

    Hey guys,
    I'm looking to install a better hard drive into my MacBook Pro (15.4" Intel Core 2 Duo 2.2 Ghz) that I bought last September, and I'm strictly a software guy: I know little to nothing about hardware.
    I'm hoping to upgrade from a 120 GB to a 320 and hopefully from 5400 rpm to 7200 rpm. Is there any other specifications I need to follow, other than it needs to be a notebook hard drive and it needs to be SATA?
    I have these picked out from a previous post:
    http://www.ifixit.com/Apple-Parts/320-GB-7200-RPM-Hitachi-SATA-Hard-Drive-New/IF 107-063
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145228
    Is there any difference besides the price? Will both work in my computer?
    Also, I have the AppleCare protection plan. Is there someone who can install a hard drive for me that won't void the protection plan?
    I tried calling an apple store, and they want me to come in to the apple store and talk to a genius, which is too difficult for me at the moment.
    Thanks,
    - Keith

    Yeah I'm more of a speed freak, I admit it. 7200 RPM sounds good even sacrificing the size, because I already have an external and intend to get a huge desktop in the next few years. Also, my laptop is much more powerful than any of my computers could ever be upgraded to be.
    Also, I talked to my brother who says compared to my 5400 rpm hard drive, a 7200 rpm hard drive will run *significantly hotter* and get *significantly less battery life* (~30 minutes depending). Has anyone here upgraded a 5400 rpm notebook hard drive to a 7200 rpm hard drive before? Can you say anything about these claims?
    I'm pretty sure I'm getting one of these two:
    http://eshop.macsales.com/item/Hitachi/0A57547/
    http://eshop.macsales.com/item/Western%20Digital/WD3200BEKT/
    Any advice of comparison, brand loyalty, or how these specific hard drives will compare when it comes to heating up or battery life would be appreciated (for example, the Hitachi one claims to use less energy and user reviews claim to get better battery life).
    Thanks,
    - Keith
    Message was edited by: Keith A.

  • How do I split my hard drive on my macbook pro to add windows7 proffessional

    Where do I find info on how to split/partition my hard drive on my macbook pro so I can add windows7 pro. ?
    my wife is taking an intro to computers course and needs to be able to access windows programs.

    Hi,
    the BootCamp support site http://www.apple.com/support/bootcamp/ and the BootCamp Installation Guide to be found there.
    Read the Guide carefully and make sure to have/make a backup of your OSX before starting.
    Regards
    Stefan

Maybe you are looking for

  • How to configure Oracle HTTP server

    Hi, I installed APEX 3.0 in Oracle 10.2.0.2 database. I installed HTTP server from Oracle 10.2.0 database companion CD. The problem is I am not sure which conf file I need to modify as in the installation document, it only shows steps for how to conf

  • Unable to see Planning Classic Application Administration 11.1.1.3

    Hi Gurus, I successfully installed full suit of Hyperion 11.1.1.3 When I go to workspace I can see Classic Application Administration for Consolidation, but I cannot see Classic Application Administration for Planning. I re-configured planning as wel

  • How to add JPanel in  JComboBox?

    Hi. How to add JPanel in JComboBox...? Regards Bilal

  • File Sharing from 10.3 to 10.4

    Word is on the BigBox running 10.4. On the OldBox running 10.3 system are Word documents. Now there are two problems 1) minor, 2) aggravating. 1) Is that on OldBox pulling down the Go menu; Connect to Server.... the BigBox is listed, but selecting it

  • Adobe Illustrator CS6 (Windows 7 64 Pro) File Save Anomaly - video link included - HELP?!

    When I save a Illustrator file, all my toolbars blink, flash, and turn 'black'.... and the files take an unusual amount of time to save.  I have inlcuded a video link so you can see exactly what it is doing... Wondering what is causing this, and how