I need drivers for the X-Fi XtremeMu

I need Windows ME drivers cause that's the OS I have and I can't seem to find any. If they arent, Any workarounds? I really want sound.

Not gonna work. I tried softmodding Audigy 2 drivers to make my Audigy 4 work on WinME but to no avail, it was futile. The X-fi drivers were built on the emphasis of Windows Xp and XP 64bit.
Just upgrade to XP, it's only like $99. Or find a copy of Windows 2000 on ebay and return your x-fi and get an Audigy 4. Or if you really want a good sound card with WinME you should get your hands on an Audigy 2 ZS which has good drivers for WinME, better than the 2K/XP drivers.Message Edited by SquealOfDeath on 02-4-200704:48 PM
Message Edited by SquealOfDeath on 02-4-200704:49 PM

Similar Messages

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

I need drivers for the "Emagic AMT-8" midi interface

I just bought the AMT-8 interface, but the guy I bought it from did not include the drivers for the interface.
Does anabody know how I get my hands on the drivers? My setup is a Macbook with Mac OS X (version 10.5.4) and I use Logic Express 8...
Thanks - Jens Sejersen

Jens,
Keep going with the installation until you can't go any further without installing the entire program. If you get to that point and still do not see the "Custom" installation choice, start over and, this time, press the OPTION key (keep holding it down!), then double-click on the "Install Logic" like you did before. Go through the installation to see if the "Custom" install shows up. (If the CONTROL key does not work then try the COMMAND key, if that does not work, try the Shift key).
Good luck
Anyse

URGENT PLEASE!! Need drivers for the Extigy external soundcard - S80

Hi, could anyone help me please? I lost my drivers CD and now I need those to configure it for a party tomorrow!
Thanks in advance!
Mauricio

Sorry dude, search and you'll see....you are screwed! They never posted even a mixer for download! Maybe you'll get one of those cut & paste messages from that moderator who can't accept Private Messages saying "We do support our product...if you call sales and buy ( another product ) a driver CD..." isn't that support? What a joke, 'eh!
Joe "Dreamcyfer" J.

I need drivers for the Diamond Speedstar A90 vers. 5060 Adapter.

I am trying to install solaris7 on intel and it's failing because my video adapters/card's (Diamond Speedstar A90 version 5060) drivers are not included on the CD. Does anyone know where I could I find "Supplemental Drivers"?
I also tried the installation with an S3 Savage4 card (16M) and did not succeed; any help with this?
If I have to buy a new card with is the best card used by solaris on intel?
Thank you,
Mathias.

CArds supported by Solaris are listed in the applicable HCL at
soldc.sun.com/support
Solaris 8, for which the media kit can be obtained for $75, has a little additional graphics support (for HCL see above).
Finally, third party drivers are available e.g. from www.xig.com or xfree86.org

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

HP deskjet 1220c prints perfectly on WIN 98... BUT need drivers for WIN XP

HP deskjet 1220c prints perfectly on WIN 98... YES I have a new computer with WIN XP...
BUT... can not find any printer drivers for the HP1220c... NEED HELP... THANKS...
ALSO... is there a way to just print TEST PAGE when the printer come on... without computer.
[email protected]

Is this what you are looking for:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=se&prodNameId=19142&pr...
Message Edited by C0mdrData on 05-25-2009 07:44 AM

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

Need drivers for SB 4.1 Digital in linux platf

I have Recently got a SB PCI 4. Digital. I want to use in in Linux system. I have Fedora Core 2 in my system and it detected the sound card as Ensoniq 5882.
It is producing a lot of Hiss noise which sounds like Gas comming out of a cylinder.Somebody please provide me with the Right Drivers to use the card in Linux.
It would be really of a great Help.
-Siva kumar reddy.CH.V

First please donot skip reading because it is a long message : PLEASE HELP!!!
The chipset in the card i am having is emu0k, and it is producing a lot of noise like gas comming out of a leaked cylinder. I donot know the reason why it is producing that but then i thought it would be a driver fault because it detected a wrong chipset.
The specifications for the card is in the link
http://www.in.creative.com/products/product.asp?category=&subcategory=207&product=68&n av=2
Then i got the alsa drivers V .0.8 for emu0k from alsa-project site because i didnot find the drivers for the model name but i found them for the chipset.i tried to install them as per the instructions provide in the following link of alsa.
http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labs&card=Sound+Blas ter+Li've+Value.&chip=emu0k&module=emu0k[/url]
but when i type command /sbin/modprobe snd-emu0k it is giving eroor message. Then i restarted my system and again tried to execute the same same command it worked!!! but then no mixers are working to unmute.
whether i am using the right drivers ? if not please tell me which one to use.if yes then please help me to install the drivers in linux. I am a beguiner of using linux but need to work in it for my project.
-Siva Kumar Reddy.CH.V

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit

I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.

Hi, For the printer: http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards.

I am looking for pre-NI-DAQ drivers for the NI 455x DSA cards.

I have inherited an older piece of production equipment, and I need to find the older drivers for the NI455x DSA card. Is there an archive directory that contains the install information for the NIDSA fp's, dll's, etc.

The NI 445x DSA cards are supported by the NI-DAQ 6.9.1 driver currently available on the web at www.ni.com and follow the downloads link. You will also want to use the NI-DSA driver to program the NI-445x board which is also available at the download site.
Some older drivers are available at the download site by choosing all Drivers instead of current.

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

Need drivers for built in iSight for Windows XP Parallel Desktop

I'm trying to get my iSight built into my MacBook Pro to work in my virtual computer run on my Mac using Parallels Desktop 4 on and the virtual operating system is Windows XP. So the drivers need to be Windows compatible. I don't want to have to use a third party external camera when I have a built in one. The iSight will not work on Windows Messenger for Mac so I have to use my Windows operating system to make it work. I have not seen any downloadable drivers for the iSight on the Apple sight that would work for Windows. I would appreciate someone directing me to some if they exist.

Thank you so much for the help. I'm running Snow Leopard, so the specific references did not match exactly, but I was able to find my way. I had to finagle trying to get the drivers to load and be recognized by Windows XP, but it eventually did after a couple restarts and a few choice cuss words! Thanks again.

Drivers for the Westell 6100 modem for my DSL?

Does anyone know where I can get the proper driver for my 6100 Westell modem? I have a yellow question mark in my device manager and i keep getting a no driver found for ethernet connection message.

If you are using ethernet, no drivers for the modem are needed.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I need drivers for the X-Fi XtremeMu

Similar Messages

Maybe you are looking for