I need effective perspective correction.

I I take architectural in Sony's .SR2 Raw format. One of my photos does not seem to be correctable in LR 3 - there are no horizontals.
I think it needs a 'Force parallel' plugin such in DxO Optics and the Altostorm one I use in CS2. Any suggestions?

So how good are LR's perspective controls at correcting both vertical and horizontal perspective? The below image is the original 17mm image corrected using LRs controls, Vertical +20, Horizontal +27, Rotate +.3, and Scale 87. The second image was shot at a much further distance using 40mm focal length with no LR perspective correction. Interestingly I obtained the best results (i.e. closest match to the 40mm image) using NO lens distortion correction. With Lens Distortion correction applied in the 17mm image, elongation is increased and the roof to the right slanted downward when all other lines were parallel. From past experience I have found most images shot at extreme wide angle look more natural without applying lens distortion correction (i.e. barrel distortion), for this very reason. I rarely use it and leave the default at 0% for all my lenses. I only apply it on images with visible distortion, which are very few.
17mm with LR corrections
40mm with NO LR corrections
The LR corrected 17mm image is virtually identical to the flat perspective 40mm image. Their is of course visible elongation in the light at the upper left and other areas of the 17mm image, but you're not going to be able to change that with PC2 or C1 either! If you would like to try the below picture is a fully uncorrected image exported outof LR with the same size and settings as the above pictures:
Original 17mm image LR Export without corrections

Similar Messages

Perspective correction and Lens distortion removal tools

Hi,
as a photographer who aspires to create pictures with best possible quality available to me I am very bothered that my primary image editing tool is lacking Perspective correction and Lens distortion removal tools. I believe that there should be no questions if such tools are necessity or so to speak additional enhancements. It is eating the disk space as well having multiple copies clutters the projects if these functions are available only via plug-ins or additional external tools.
How are you guys handling such issues?
For a moment I was thinking to convert all the files through Nikon Capture NX2 before importing to Aperture but that again is counter effective in long run. Aperture is built to work with Raw files and large tif files take longer to process between various programs and I would loose all the benefits of having Raw file at all.

It would be nice to have those functions added to the next version.
I always use the following page to select the product I want to provide feedback on:
http://www.apple.com/feedback/
Note - due to the number of lenses and cameras, this would be a huge task and the end result may not include a lot of older lenses which really need the correction.
I use PT Lens as a plug-in inside of Aperture for the most part (although I do have PS CS5 and DxO Pro 6 for situations where I want something different).
As you said, the downside is that you end up with a TIFF (from inside Aperture) or a processed file needing to be import into Aperture.

I want to ask about changing perspective and perspective correction in photoshop. Obviously, we can tilt and straighten buildings and other monuments, which are leaning in any direction. Now, what I want to know is whether we can change perspective for hu

I want to ask about changing perspective and perspective correction in photoshop. Obviously, we can tilt and straighten buildings and other monuments, which are leaning in any direction. Now, what I want to know is whether we can change perspective for human faces. For example, if there is a human face, where one part of the face is facing the camera and the other part of the face is only partially facing the camera, can we make this face look totally at the camera? I mean, look straight in front, and I am talking about the whole face here. I am attaching an image as an example of what I am talking about. @

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Our EFFECT COLOUR CORRECTION COLOUR BALANCE feature doesn't work on solids. Any clues?

Hi, I'm trying to help a friend troubleshoot a light sabre effect. He has followed a series of instructions from the net, but no matter what we try the solid will not change colour using the EFFECT > COLOUR CORRECTION > COLOUR BALANCE feature on the layer.
On the linked page is the file + full instructions:
http://beyondthewallmedia.com/?q=aftereffectsproblem
Could someone more experienced with After Effects please help us out and tell us why this feature isn't working in this project?
"Using your mouse to slide the numbers, drag the 3 “Blue Balance” labels to the right, up to 100 is you wish. This should start to change your glowing white lightsabre into a blue one. Play around with it, till you have the colour you want. You can slide the “Red” and “Green” Balance labels to the left to lessen their effect too."
Would really value someone taking a look at this for us. Thanks.

I agree with Mylenium. There are some serious flaws in the instructions. With no colour in the solid, Color Balance will have no effect.
But your project is also incorrectly built, according to the instructions: you've duplicated the mask 5 times, rather than the layer.
In the precomp, make your solid blue, with just one feathered mask, duplicate the layer 3-5 times, switch all to Add transfer mode.

I have sent files several times now and when the recipient clicks the link to open. it says page cannot be found. This just started happening. what needs to be corrected?

In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found. This just started happening. What needs to be corrected?

I can think of a couple of reasons for this behavior.
You inadvertently turned off the sharing for the files.
The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
Some things to try.
Have the user send the link back to you so that you can test it. Does it work for you?
If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
If you could get back to me with answers, perhaps we can get to the bottom of this.

Item category 003 needs to be corrected

Hi,
While simulating vendor / customer invoice I am getting error as 'Item category 003 needs to be corrected'.
Could anyone help me to understand why this error occurred and how to go through it?
Thank you,

Hi ,
The error is sometimes experienced when you dont fill in the mandatory fields for input .
Like the text tab , simply double click the line item which is shown as error and fill in the text tab with details .
hope this suffices .
Rgrds ,
Dewang.

PSE 8 and ACR 6.1 perspective correction?

After reading about the perspective correction that is supposed to be available in ACR 6.1, I downloaded it and installed it into PSE 8 (Windows 7 64bit). Installation seemed to work. It does say 6.1 when I open Camera Raw. However, I don't see any of the cool new features like lens correction, or
perspective correction. Do they not work with Elements 8?

PSE has limited access to many of the ACR adjustments. The ACR you have with PSE8 will actually perform the adjustments if they are in the sidecar or embedded in the image, but only Photoshop or Lightroom have the user-interface to specify those adjustments and place them in the sidecar or embed them in the image metadata.

Wish to update to 7.1.2 need to backup correct? I select settings iCloud sroage

wish to update to 7.1.2 need to backup correct? I select settings>iCloud>storage & backup and my iCloud backup switch is gray. why?

If you're phone was provided by your employer, or if you have added your employer's exchange email account to you phone, you employer may have pushed a security profile to your phone preventing it from backing up to iCloud. You would have to confirm this with your employer's IT department.
Back up to your computer instead by going connecting it to your computer, opening iTunes and going to File>Devices>Back Up and choosing Transfer Purchases if prompted.

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Help. I Can't Get Flash Player Installed on Windows 7 32 bit. The subinacl permissions need to be corrected. How Do I Do This?

Help. I Can't Get Flash Player Installed on Windows 7 32 bit. The subinacl permissions need to be corrected. How Do I Do This? The error message says I do not have sufficient permissions to install flash player. I have full administrative permissions.

Hi Paul,
Instructions (including video) for resetting permissions using SubInACL are available here How do I fix Windows permission problems with Flash Player?.
Maria

If we use the $495 DPS service we don't really need the cloud correct?

If we use the $495 DPS service we don't really need the cloud, correct?

The 495 covers a pro account which allows for subscription apps as well as single edition. If all you’re interested in is single edition then Creative Cloud is the way to go.
Bob

Wrong Auc Settled and depreciation need to be corrected

Hi,
Issue is our end user created asset called A with 15000 in June 2008.
Based on that 2 months depreciation was posted properly.
After that one wrong Auc was settled to this asset with the amount of 10000. (T Code : AIAB)
So after that based on this amount system calculated depreciation.
Today only we got identified that error.
Now we need to the correct the all the wrong postings.
Please guide me the full process to rectify with T codes.
Sateesh

Hi,
Steps to be followed
1. Reverse the Capitalisation done (in AIBU) using T code AB08. give the Auc Asset number and select the capitalisation Line item.
2. Do the capitalisation with correct asset number and asset value date.
3. Run Depreciation in AFAB.
If the depreciation is already posted, the system would calculated the differential amount to be posted. But execute the AFAB for the wrong asset in the repeat mode. Adjustment amount will be reversed in the GL account
4. IF depreciation is not run for that asset with wrong amount, then just execute AFAB for the current period.
Initially try this in the test run mode.. so check the amount to be posted.
Hope this helps
Regards
Seshadri

Perspective correction app recommendations?

Can anyone recommend a perspective correction app? Preferably one that works well with iPhoto?
There is DxO Perspective and CorrectPerspective on the App Store, both with very little or no reviews.
Thanks,
Rob.

That is one i'd love to have!

Perspective correction and scaling in y direction only

Nach einer starken vertikalen Perspektivkorrektur werden Gebaeude "zu hoch".
Wie skaliere ich das Bild nur in y-Richtung ?
After applying vertical perspective correction for tall buildings, the buildings get "too tall".
How do I down-scale the vertical extent of the "corrected" image ? (no global scaling) ?

That is not possible in Lr, only in Photoshop CSxx.
Also, in Photoshop CSxx you can extend the canvas at the top, so that he top of the building does not go beyond the image top margin.

Perspective correction

Hi,
I know that LR does not have perspective correction and that it has been requested as a feature, but in the meantime I would like to know what people recommend for such correction.
I have Photoshop Elements v4.0 for Mac which I can use to host a plugin, but if people think a standalone program is better then I could use that.
Looking forward to your suggestions.
Andrew.
Mac mini 2GB RAM, Mac OSX 10.4.10, PSE v4.0 and LR1.1

Check out
DxO. If you know what you are doing, you can try the free
Hugin or the (not so free) lens correction tool in photoshop.

I need effective perspective correction.

Similar Messages

Maybe you are looking for