I need either a stock control system or spread sheet.

Hi
I'm a mobile business using 3gs with OS4.
I Would like either a stock control system or a spread sheet that I can view and and update on both my Mac and my Iphone.
Could any of you wonderful people recommend anything please.
Thanks in advance
Michael

Similar Messages

Newbie needs help! Jail Control System

Hi
I have an application for a jail control system I.E. control doors,lights,cameras,and intercom system. My question I think is fairly simple but I have not found a good way to do this using lookout.
I have doors that all have an open sensor on them for feedback. That if certain doors are open certain other doors cannot be opened until they are closed. But my client wants to be able to override this feature by clicking on an override button prompting them for a password to allow the door to be opened for a few seconds regaurdless of the other door being opened. Anyone that has any ideas on how I could acomplish this it would be greatly appreciated as I am very new to lookout.
Thank You
Rob
P.S. I am using DirectLogic DL20
5 series PLC's

I would recommend using the built in security level system: Assign the override pushbutton a security level sufficiently high- say 8 or 9 (at my site 10 is for developers only). Then each user has a login name, password, and security level. Only users with a security level at or greater than the override pushbutton security level can depress the button. With this method the event logging system can also track who pushed the button when.
Just one idea- there are many, many different ways to do the same thing with Lookout.
Regards,
Tommy Scharmann

Help needed to design Greenhouse control system

Has anyone designed a complete system with weather station, nutrient mixing etc

Kahlid,
I would appreciate some help with my greenhouse. I'm just getting ready to design a small facility to learn on. I have a lot of LV experience and want to use that to build an automated greenhouse for house plants. Any help or info on where to obtain some help would be greatly appreciated.
Thanks,
Hal Curling

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

Need help with control system that reduces a flat output signal every time a certain input exceeds given value

I'm having difficulty setting up a closed loop control system that reduces one of my voltage outputs (connected to a high voltage system) by 30% every time a measured voltage exceeds a certain threshold value. I'm using a USB 6229 DAQ. I've been trying to create a waveform that looks like a DC signal, but the only waveforms that I can seem to manipulate while my VI is running are the stock waveform types. Also, I've tried to use a formula node or conditional structure to update the output value every time the measured voltage exceeds a given value, but everything I do reinitializes the output value every time it runs or won't store the previous signal value. I'm using LabVIEW 8.6 and don't have the PID or similar express VI's. I've attached the mess I've got working right now. Can anyone help? I'm really stuck!
Thanks!
Attachments:
HiV step down.vi ‏40 KB
output control.vi ‏100 KB

I'm sorry it's such a mess; I'm still pretty new at this. These are both little driver programs for a larger overall control program.
Output control is meant to send a flat signal to the DAQ whose value can be manipulated while the VI is running. I have the second activated segment merely to check the values being output. I didn't realize I attached a version with a meaningless control...I had a control where the user would put in the stating voltage (the high voltage source has a 1V-100V setting for external control). I've attached this slightly different but equally dysfunctional version. Ideally, I would have liked something like the analog signal generator vi to come with an input wiring for offset on the DC signal. Most of the code was diabled because it is copied from an example; it is largely rubbish. I initially used the DAQ Assistant, but when things weren't working out I switched to putting in each step manually to try to troubleshoot.
As far as HiV step down is concerned, I've tried something different with a nested case structure (if that's the right terminology?), and I've attached that file. I think this problem has been solved, but you never know!
Attachments:
output control slightly different.vi ‏100 KB
HiV step down w case structures.vi ‏44 KB

Help needed to use Source code control system

Hi all
I am working on Suse 9.2 and I use JSP and Servlet in my project.I like to use Source Code Control System (SCCS) . But I have no idea about that.I need some help to initiate my project.
Thanks in advance.
-jegan

I don't know this "SCCS" but I advice you to use Subversion as it is widely used open source standard.

Cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

Full programmable control system

hiii
i want a full programmable controlling system of NI to control operation of testing some materials in three dimensions X,Y and Z from a personal computer ...
so i think that what i need is programmable controlling board and three stepper motors for each direction and i dont know if its necessary anything else ...
so what can u suggest to me a system to buy and do i need anything else ??
thanx ...
Ahmed
Granada University
Spain

Ahmed,
with the information that you have provided, I suggest the following components:
1 PCI-7334 (motion control device)
A stepper drive (either a single four-axis stepper drive or 3 one-axis stepper drives)
3 stepper motors (you will have to select the type that fits best to your application requirements).
This is one possible option, but depending on your needs there are also completely different potential solutions (e. g. a real-time controller or an FPGA based system with the NI SoftMotion development module).
If you provide more information about your requirements, I can help you more specifically, but an even better option would be to talk to an NI sales representative in Spain.
Kind regards,
Jochen Klier
National Instruments

Budget Control System Configuration

Hi,
Please let me know how to configer Purchasing Budget, Overheads budget, sales budget, production budget and capital budget.
Regards
SAPCO

Dear NRSAPCO,
We can create budget either for cost centers or internal orders, generally. But if you wants to get more as Budgetory control system u must go to Fund management.
Even in Cost center budgeting u can only create Budgets and at the end of the period u can get Actual Vs budgetted figures report. but u cont get any "Trigger" if u r actual figure (of a cost center) exceeds Budget figure.
Where as in internal order u get get this trigger and u need to create subsequent budget (increasing the amont of budget) to get entry posted.
Thank you

Prime network control system appliance (NCS)

Hi,
i have a new cisco prime network control system appliance (NCS)
I completed the initial installation however post installation it performed a reboot and is now stuck at Init Level 3.
I have restarted the machine several time but the same result.

Umm a new appliance should have had the application pre-installed. Were you upgrading?
In either case, you'll probably need to open a TAC case. Even without Smartnet you should have at least 90-day warranty support

Out of Stock Control available in Turbo Lister

Hi Turbo Lister Users,
The option to use the Out of Stock Control feature in Turbo Lister is now available in the Beta version of the program.
When deciding whether or not to be a Beta user, please keep in mind that the beta versions aren't free of bugs, nor are they fully supported. Everyone is welcome to join the Beta Program, but experienced users will benefit most from using Turbo Lister beta software.
If you would like to opt into the Beta version, please follow these steps:
1. Open Turbo Lister
2. Click on Tools->Options
3. Expand Advanced Options
4. Click on Program Updates
5. Click the Join Beta Program button
Once you accept the terms, click on Tools->Check For Program Updates and install any updates found, if you are not automatically prompted to do so.
After the updates are installed, the program will need to be closed and re-opened.
To use the Out of Stock Control feature, you must do the following:
Turn on the feature in your My eBay. This can be accomplished by logging into your My eBay account, hovering over the Account tab and selecting Site Preferences. From there, expand the Sell Your Item form and listings section and check the box "Use Out of Stock Control option". Please note that this will activate the Out Of Stock Control option for all your Active Fixed Price Good Til Canceled Listings. The time it takes for Turbo Lister to recognize the change to your account can take a few minutes to a few hours.
Turbo Lister will then allow new Fixed Price GTC listings to be uploaded with a Qty of 0 as well as editing Active items in the Listing Activity section to set the Qty to 0.
For sellers that use File Exchange or the eBay API to set the Out Of Stock Control feature for specific listings, you only need to make sure the OutOfStockControl field is set to TRUE. (The only restriction for this option is that you will only be able to edit active items to depleat or increase the Quantity count. Creating new items would need to be done through File Exchange or the API).
For more information on the Out Of Stock Control feature, please review the following Help Page:
http://pages.ebay.com/help/sell/multiple.html#outofstock
Regards,
Draex
eBay Turbo Lister Support

Hi jerxa10,
The error you are receiving was corrected in a previous update of the program.
To correct this issue, we suggest that you reset the data within the Turbo Lister program by following the directions below:
-Open Turbo Lister
-Click on Tools->Install Complete Version Update
-Click Ok
Once the updates are installed, check to see if you are able to Edit Int'l items in bulk.
Also, please feel free to create a new post instead of posting to an informational eBay post related to new features of the program.
Regards,
Draex
eBay Turbo Lister Support

Control Systems Engineer

Control Systems Engineer
Seattle Safety – Kent, WA 98032
Seattle Safety is looking for a qualified individual to fill an opening for Control Systems Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Control Systems Engineer include:
• Experience designing, testing, and optimizing industrial automation and control systems utilizing modern and classic control methodologies such as PID. Experience with neural networks.
• Strong background in mathematics, physics, and signal analysis.
• Electrical / Electronic design experience including automation.
• Design, troubleshoot, and test software written in LabVIEW 8.6 & 2012 and C.
• Help customers diagnosing electrical, software, and mechanical problems with their systems. This will sometimes involve working odd hours for customers on the other side of the planet.
• Support installations of crash test equipment at on-site locations worldwide.
• Provide round the clock technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
• Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
• Work with current team members to restructure existing crash test software.
• Supports all aspects of software application design, development, testing, deployment, and support.
• Perform software testing at a unit and integration level to ensure expected behavior.
• Comment code clearly and consistently throughout the development process.
• Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
• Candidates must be located in the US, the northwest would be ideal.
Furthermore, the ideal candidate would possess the following skills:
• Advanced or expert knowledge of LabVIEW.
• Advanced or expert knowledge of C.
• Expert knowledge of industrial controls.
• Familiarity with a minimum one low-level programming language (C#, VB, Ladder, etc)
• Familiarity with data acquisition concepts and hardware.
• Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
• Experience with sophisticated feedback control systems.
• BSEE, BS Physics, and BSME are preferred but not required depending on experience.
• Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.

Dear Sir/Mam,
I’m particularly interested in the position of Control System Engineer, which relates strongly to my more than six years of experience in designing various applications for testing and automation. I am Certified LabVIEW Associate Developer & prepared for CLD also. Currently I am leading a team for the project for Machine Automation and remote diagnostics, and I believe I meet all the essential criteria of the position. My work at my current organization has been rewarding and productive. However, I wish to expand my career further, into the application designing and development role. The position also has a definite correlation with my practical knowledge and experience. You’ll see from my CV that I have been deeply involved in designing and development of various applications based on Programming techniques, hardware and network designing. I feel that I am well qualified to make an effective and useful contribution to design good application which will be market acceptable.
I’m enthusiastic about the chance to participate in a meaningful role with an industry leader in the field.
Thank you for your consideration of my application. Please contact me should you require any further information,
Yours sincerely,
Mohit Monga
Mohit Monga
Attachments:
Mohit Monga_CV.doc ‏159 KB

User SM_EFWK stock the system

HI to all,
I have a problem in Solution Manager 7.1 SP06
user SM_EFWK is stock the system
I attached screen shot
need your help
and i have a Dump "time out"
Category               ABAP Programming Error
Runtime Errors         TIME_OUT
ABAP Program           CL_E2EEFWK_LOGGING============CP
Application Component SV-SMG-DIA
Date and Time          24.09.2012 09:11:04
Best Regards
Naor

Dear Jagadish
I checked SMGW
and the user SM_EFWK work very hard for the same system
maybe it's the problem
Please checked the attached
thanks
Naor

Integrating with external access control system

Hi,
I am new at the network but have read a lot recently about the above subject as much as I could. However, I am a bit mixed up at something. I understand in order to update SAP HR module with employees time and attendance logs I need to interface with a certified PDC interface => (SAP ECC - PLANT DATA COLLECTION - TIME & ATTENDANCE AND EMPLOYEE EXPENDITURES (HR-PDC)
I wish to develop a system that updates the the SAP HR with employee attendance logs. In addition I also wish enroll new employees into my access control system database by polling the SAP HR database.
Now my question is if I use .NET connector:
1. Does the connector it include functions that can help with the above requirements?
2. Is the use of PDC interface here still a must?
Thanks

For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
I hope this answer will help.

Cisco wireless control system

we are using cisco wireless control system i need block some MAC address or devices how can i do it

Hi,
Yes you can block the specific client using MAC Address filtering option in WCS
This option is avialbe in Configure> Security >MAC Filtering
here you can create new template as per your requirement
Go through below link for detail knowledge.
http://www.cisco.com/c/en/us/td/docs/wireless/wcs/7-0/configuration/guide/WCS70cg/7_0temp.html#wp1095263

I need either a stock control system or spread sheet.

Similar Messages

Maybe you are looking for