I need estimated MTBF for a list of products

Our system customer has requested estimated MTBF.  I therefore need estimated MTBF for the following PXI products: PXI-6509, PXI-6542, PXI-7813R, PXI-8431/8, PXI-8432/4, PXI-7953R.
It is understood these are estimates only and will be accompanied by disclaimers.  A full 217 calculation is not expected or desired.  I have obtained estimates from other system component suppliers.  How do I obtain these estimates from NI?
Solved!
Go to Solution.

I did some more research on how our MTBF figures are calculated. Generally, including this card, our MTBFs are calculated based on design, not field fail rates. The method used to determine this particular card's MTBF was Bellcore Issue Level II. 
Dominik E.
Applications Engineer
National Instruments

Similar Messages

  • Need a Report for a List of PO's against a Sales Order

    Need a Report for a List of PO's against a Sales Order

    Hi
    We can get through Me2n, with selection parameters with account assignment as C (Sales Order)
    Regards
    Prasanna

  • How to get Operation wise Time for a list of Production Orders

    Dear Sir,
    We have a list of Production Orders numbers and need to know the operation wise time duration for these production orers (off course the desired time is same as mentioned in the routing for the relevant component)
    Kindly guide us as how can we get these timing details .
    Rgds
    Sonia agarwal

    Sonia,
    I hope your are refering to setup time, process time, teardown time in the production order.
    use report COOIS for it.
    In the 'List choose operation.
    Give input for the production orders in the slection scren. Execute.
    In the report select the columns as per your requirement.
    Hope this helps you.
    SmanS

  • What do i need to know for remote purchase Adobe products?

    I will be purchasing CS6 Master Collection from the USA and will be using it in Europe. I would like to know what things must i be careful of when purchasing such a product and what should i ask the seller of, so that i will avoid to encounter any bad surprises for eg. activation, hyphenation or any other things that would a product from a foreign country would cause me!

    blue sky,
    I will assume you are running a version of OSX later than 10.3. If this is the case, adding wireless could not be easier.
    - If you want 54Mbps "extreme" speed, then just pop in one of the below PC cards; they use the Broadcom chipset which AirPort software fully supports.
    http://www.sonnettech.com/product/aria_extreme.html
    http://www.macsense.com/product/broadband/WPE800.html
    http://www.asante.com/products/productsLvl3/AL5403_XG.asp
    http://www.buffalotech.com/wireless/products/airstation/WLICBG54A.html
    - If speed (or price) is no concern, you can install the original AirPort card (11Mbps) under the keyboard. This is the only card that works in that slot, is fully supported by AirPort, and offers an always-present, hidden wireless card. It is no longer made so your source will be the secondary market with high prices.
    http://docs.info.apple.com/article.html?artnum=50028
    Airport 11Mbps Card Kit
    M7600LL/E

  • Need the report  for staged materials in production order

    Hi
    My user is staging the materials multiple times for the one production order.Due this reason multiple TR were generated .Because of Multiple TR , user is generating  multiple TO for issuing the material to a production order.
    Is there any way to stop the  staging process for the materials already staged.I would like to know whether there is any report which give the details of staged materials and corresponding TR & TO for a production order.
    Thanks
    Sankar

    Hi
    Warehouse activity Monitor is best tool/ report , which give the details of staged materials and corresponding TRs & TOs, to stop/cancle you have to use related WM transactions.
    To setup WM moniter user below document
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/LEWM/MMWM.pdf
    Thanks
    Madhu

  • Info needed on how to get list price for a given MATNR and pricing Conditio

    Hi All,
    Can some one help me in finding List price for a given MATNR and pricing condition type.
    Basically, i need info regarding the tables that i need to use for this purpose.
    Thanks in advance.
    Regards,
    Udaya.
    PS: All helpful answers will be rewarded.

    Hi Udaya,
    A simple solution to all these kind of problems:
    Goto  Transation SE16
    Table :TSTC
    in Tcode :Give A* or V*  or anything...and find the relevant transctions and data.
    if found useful...reward points.
    Regards,
    Nisha

  • Info needed on how to get list price for a given MATNR and pricing Conditi

    Hi All,
    Can some one help me in finding List price for a given MATNR and pricing condition type.
    Basically, i need info regarding the tables that i need to use for this purpose.
    Thanks in advance.
    Regards,
    Udaya.
    PS: All helpful answers will be rewarded.

    Hi,
    I moved your topic to this forum
    Mario

  • Need a complete list of products for students plan

    Hi, I need a complete list of products for the student's plan.
    Thanks!

    Hi Mio,
    Here is the link for Creative Cloud pricing and membership plans | Adobe Creative Cloud
    Thanks,
    Atul Saini

  • HT201209 How to get an itunes gift card code, no need to wait for shipping

    Good day to all,
    I want to get an itunes gift card just to download whatsapp on my iphone 3gs. I have my credit card but the billing address is in Haiti, unfortunately Haiti is not in your list of  countries. How can I get itunes gift card code immediately in order to download that application? No need to wait for shipping, just want to have the code to add it to my apple account.
    If you have a better solution, it's welcome.
    Thank you in advance for your reply

    Sorry, but you can't, if you live in Haiti. As you say yourself, there is no iTunes Store for Haiti and you are not allowed to use the iTunes Store of any other country.
    If you live in a country where there is an iTunes Store, check to see if Apple sells physical gift cards in your country and if so purchase and redeem one of those. There is no way to purchase an electronic gift certificate from Apple without a credit card from the country whose iTunes Store you wish to use.
    Regards.

  • How to Create a Dynamic http address that opens the Explorer Window for a List Item When a Button Is Clicked--Currently Trying to Make this Work with Javascript

    I have created a button (via Content Editor) that uses JavaScript to open the Attachments folder of a list item in the Explorer Window in SharePoint 2010. The purpose is to have drag and drop functionality for each list item, having multiple attachments.
    The button works but opens the "Attachments" folder containing all of the other folders for each list item (one folder per item). It seems that when you add an attachment to a list item, SharePoint numbers the folder based on the item's ID. What
    I'm trying to do is take the JavaScript I have and have it run when a button is clicked in a custom form. When it runs, I'm trying to get it to open the "specific" folder for the list item. I have had success creating a hyperlink in the list that
    does this; however, the link WILL NOT work until I use the Content Editor created button that runs JavaScript, that prompts me to click OK to my profile certificate, and then opens the Attachment folder. After that occurs, I can use my hyperlinks without issue
    because I'm no longer prompted to click OK for my cert.
    So I'm trying to take the JavaScript I have and place it in a list item form (custom form) and have it run when a form button is clicked. The problem is I have very little knowledge of JavaScript (did I mention little?) and
    "don't know how to take the "http:" address I have in the script and append to it the list item ID, according to the record I have open."
    So that for any record I open, the script will grab the corresponding record ID (or list item ID) and append it.
    Here's the script I'm working with (which I didn't create but am grateful for):
    <style>
    .httpFolder {behavior:url(#default#httpFolder);}
    </style>
    <script text = "javascript">
       function fnOpenFolderView(){
       oDAV.navigateFrame("https://server/collection/site/subsite/Lists/Sublist/Attachments","_self");
    </script>
    <div id = "oDAV" class = "httpFolder"/>
    <input type = "button" value = "Open Attachment Folder" onclick = "fnOpenFolderView()"/>
    The above script, in the Content Editor, creates a button that opens the Attachments folder for the corresponding SharePoint list.
    JackSki123

    Hello Thriggle,
    Thank you for pointing that out. I appended your "GetUrlKeyValue" to the end and it worked. That said, I noticed it doesn't run as smoothly as when I simply click on the Content Editor button I created that resides on the SharePoint List
    ASPX page (not the form). The Content Editor button has the same code, minus the "GetUrlKeyValue". I click it; I get prompted to choose my cert; it opens right up.
    Now go to the ASPX Display form where I dump the code in a table cell. Button appears in cell; I click it; wait; wait; I get prompted for cert; it opens. Do I need some sort of "throttle" for the JavaScript? For instance, I thought before running
    JavaScript, you reference the library first. This code doesn't do that. I'm wondering if there's something more I need to make this run smoothly. Thank you both for getting me this far. 
    JackSki123

  • How can I set the Reminders app so that it does not shown my AppleID password as the header for my lists on my desktop or laptop screen?!?

    My Reminders app which I sync with iPad shows my AppleID password as a heading for my lists when I have it open on my screen of my laptop or desktop. The iPad does not reveal the password the same way. Desktop is not so worrisome, but I don't understand why this would happen and is especially weird if I have the app open in public on my laptop.  Is this a default? What do I do to make sure the list does not show by password?  I understand that sharing the Reminders via the iCloud may cause a need to show what Reminder lists are being shared between a device and laptop, but why not a user name instead of the PASSWORD!!!?

    Where in the Reminder's window are you seeing the password.  Here's what my Reminder's window looks like?
    That's Reminders V2.0 on 10.9.4.

  • Need WXP drivers for Satellite A100 (PSAA9)

    Hiya,
    I've had to re-install Windows XP on my laptop. I don't have the Toshiba drivers CD though.
    So I came here to get the drivers but I've no idea which driver goes with which hardware in my Device Manager.
    Here's what I need the drivers for under Device Manager...
    Ethernet Controller
    Mass Storage Controller
    Network Controller
    PCI Device
    PCI Device (again)
    SM Bus Controller
    Can anyone advise which specific driver I need for each?
    Many thanks,
    James

    Thanks for you replies. I'd already come across that file, but it didn't give many clues. Here's the contents of it...
    Component List Satellite A100; Satellite Pro A100; Equium A100
    Contents and Installation order
    for Windows XPH
    Windows XP Home - Windows XP HE/Pro(English) Service Pack2(RTM)
    - VALUEADD folder Service Pack2(RTM)
    - SUPPORT folder Service Pack2(RTM)
    1 Microsoft Internet Explorer V6.0(SP2)
    2 DirectX V9.0c(SP2)
    3 Windows Media Player 10 V10.00.00.3646
    4 Windows Movie Maker V2.1.4026.0
    5 Step by Step Interactive Training(HE/Pro) 3.5.25/3.5.23
    6 SLP Module OEMSLP2.0 (523759)
    7 Microsoft .NET Framework V1.1.4322(SR1)
    8 Microsoft Office(R) OneNote(TM) 2003 V11.6360.6360 SP1
    9 Hotfix for OLE and COM could allow remote code execution KB873333
    10 Hotfix for Issue in HyperTerminal Could Allow Code Execution KB873339
    11 Hotfix for Cannot add Windows components in Windows XP KB884018
    12 Hotfix for Server Message Block Vulnerability KB885250
    13 Hotfix for Issue in Windows Kernel and LSASS KB885835
    14 Hotfix for Issue in WordPad Could Allow Code Execution KB885836
    15 Hotfix for Cannot use infrared port to transfer data KB885855
    16 Hotfix for Windows Firewall My Network (subnet) only KB886185
    17 Hotfix for ASP.NET Path Validation Vulnerability KB886903
    18 Hotfix for Security Update for Windows Messenger KB887472
    19 Hotfix for Vulnerability in Hyperlink Object Library KB888113
    20 Hotfix for Windows Could Allow Information Disclosure KB888302
    21 Hotfix for Hardware (DEP)-enabled computer KB889673
    22 Hotfix for Vulnerability in Microsoft agent KB890046
    24 Hotfix for Issue in HTML Help Could Allow Code Execution KB890175
    25 Hotfix for Vulnerabilities in Windows kernel KB890859
    26 Hotfix for The DHTML Editing Component ActiveX Control KB891781
    27 Hotfix for adding the Hibernate button KB893056
    28 Hotfix for Issues in TCP/IP Could Allow Remote Code Execution KB893066(V2)
    30 Hotfix for Wi-Fi Protected Access 2 (WPA2) KB893357
    31 Hotfix for Vulnerability in Telephony service KB893756
    32 Hotfix for The Microsoft Windows Installer 3.1 KB893803(V2)
    33 Hotfix for DBCS file names are not displayed KB894391
    34 Hotfix for File Signature Verification tool reports KB894871
    35 Hotfix for Availability of Windows XP COM KB895200
    36 Hotfix for A Windows XP SP2 computer with multiple processors KB896256(V3)
    37 Hotfix for Issue in HTML Help Could Allow Remote Code Execution KB896358
    38 Hotfix for Issue in Server Message Block KB896422
    39 Hotfix for Vulnerability in Print Spooler service KB896423
    40 Hotfix for Vulnerabilities in Graphics Rendering Engine KB896424
    41 Hotfix for Vulnerability in Telnet client KB896428
    42 Hotfix for Cumulative security update for Internet Explorer KB896688
    44 Hotfix for Vulnerability in step-by-step interactive training KB898458
    45 Hotfix for Vulnerabilities in Kerberos KB899587
    47 Hotfix for Vulnerability in the Client Service for NetWare KB899589
    48 Hotfix for Vulnerability in Remote Desktop Protocol KB899591
    49 Hotfix for Vulnerabilities in the Windows shell KB900725
    50 Hotfix for Vulnerability in the Microsoft Collaboration Data Objects KB901017(KB907245)
    51 Hotfix for Vulnerability in Microsoft Color Management Module KB901214
    52 Hotfix for Vulnerability in DirectShow KB904706
    53 Hotfix for Vulnerability in Network Connection Manager KB905414
    54 Hotfix for Vulnerability in Plug and Play KB905749
    55 Sun Java 2 Runtime Environment V1.5.0_04
    56 Intel(R) Chipset Software Installation Utility V7.2.1.1006
    57 Intel 945GM/940GML Display Driver V14.18.2.4436
    58 ATI ATI M52P/M54P/M56P Display Driver V8.204-051220a1-029876C
    59 Nvidia G72M/G72MV/G73M Display Driver V83.02
    60 TI PCI7411(6-in-1) Driver V2.0.0.4
    61 Synaptics Luxpad & TouchPad Driver V8.2.9_2
    62 Realtek Audio Driver with UAA Bus driver V5.10.0.5200
    63 TOSHIBA Software Modem SM2162ALD04
    64 Intel 10/100(Ekron)/GbE(Vidaria/Tekoa) Wired LAN Driver V8.0.21.101/V9.2.24
    65 Intel 802.11a/g Golan Driver V10.1.0.13a
    66 Atheros WirelessLAN 802.11a/g.g Driver V4.1.2.111.i129
    67 Intel PRoset Utility for Golan V10.1.0.2w61
    68 Atheros Client Utility for WirelessLAN 802.11a/g.g V4.1.1.231.i153
    69 Bluetooth Stack for Windows by Toshiba V4.00.23(T)
    70 Bluetooth Monitor V2.12
    71 UPEK Finger Print Utility V5.4.0 Build 2688
    72 TOSHIBA Common Modules V1.00.18ST
    73 TOSHIBA Hotkey Utility V1.00.01ST
    74 TOSHIBA Touchpad ON/OFF Utility V1.00.01ST
    75 TOSHIBA Utilities V1.00.07ST
    76 TOSHIBA Power Saver V7.03.07.I
    77 TPS init V1.0.4.0
    78 TOSHIBA SD Memory Card Format V2.1.0.0
    79 SD Secure Module V1.0.3
    80 TOSHIBA Assist V1.03.00
    81 TOSHIBA ConfigFree V5.90.05
    82 ConfigFree Demo Screen Saver V1.00.07
    83 TOSHIBA Virtual Sound V1.02.01
    84 TOSHIBA Speech System V1.00.2511
    85 TOSHIBA Zooming Utility V2.0.0.23c
    86 TOSHIBA Controls V3.22.2700
    87 TOSHIBA PC Diagnostic Tool V3.1.5
    88 Recovery Disc Creator for ExpressPlayer-Presto V1.1.0.5
    89 CD/DVD Acoustic Silencer V1.00.008
    90 DVD-RAM Driver V5.0.2.5
    91 InterVideo WinDVD V5.0B11.533-A1222 for ATI
    92 WinDVD Creator2 Platinum V2.0B014.376C33-NEN01
    93 Record Now! Basic for TOSHIBA V7.31 Build 731B20E
    94 DLA for TOSHIBA V5.20 Build 520B11C
    95 Adobe Reader V7.0.5
    96 TOSHIBA Skins for Windows Media Player V1.00.1121
    98 Norton AntiVirus 2006 V12.0.3
    99 TOSHIBA Offer(OEM Link) 10/26/2004
    100 TOSHIBA User's Manual V1.0
    101 TBIOS Driver V2.5USB1
    102 TOSHIBA SMBIOS ActiveX Control V1.3
    103 Microsoft and Toshiba Product Registration TCL_BC_WinXP_enu_09162004
    104 AOL V9.0 Update
    105 TOSHIBA Solutions V1.0
    106 Talk-2-Toshiba V1.0
    107 EULA file of Presto V1.0
    108 ISO file of Presto V1.0.020-202821
    109 Text file of Presto V1.0.020-202821
    110 NiHelper V2.0.0.0
    - ProtonPack Master Create Tool V3.01.00
    - ProtonPack Recovery Tool V3.01.00
    ...that 114 different items! And I can see a lot of those items are not mandatory and/or are not drivers. More to point though, it does not solve my problem of needing to know the names of the drivers I should download (as presented on the downloads page) in order to fix my Driver Manager problems?
    Cheers,
    James

  • I am trying to use a site that i have to do homework on but my security settings keep blobking some applet in needs to run for it to work.

    I am trying to use a site that i have to do homework on but my security settings keep blocking some applet in needs to run for it to work. I have tried to make exceptions in the security settings but it has not worked.

    There are other things that need your attention.
    Your System Details List shows multiple Flash plugins.
    * Shockwave Flash 14.0 r0
    *Shockwave Flash 11.6 r602
    You can find the installation path of all plugins on the <b>about:plugins</b> page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
    *(32 bit Windows) C:\Windows\System32\Macromed\Flash\
    *(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

  • Start a workflow for a list item that was created by someone else

    What settings do I need to change so that I can start a workflow for a list item created by another user?
    I have a SharePoint 2013 workflow (let's call it LSR Status Workflow) that is associated with a list (called
    LSR List). When a user creates an item in the LSR List, it automatically starts the
    LSR Status Workflow. That is what I wanted, but sometimes I make changes to the workflow (via SharePoint designer) and then I would want to terminate the existing workflows that are running and restart them.
    When I try to start a workflow for anyone other than a list item that I created, I get the following error:
    Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to https://publishing.web.company.com/sites/mysite/_vti_bin/client.svc/web/lists/getbyid(guid'1f844b8f-19aa-4587-bcc2-dfb7085f36b5')/Items(31)
    Correlation Id: 8efc5304-f0a3-90f6-8ece-6875bf811869 Instance Id:
    60c83aae-5c25-4ee8-9c85-c64958ba701e
    Then when the workflow is finally suspended after it keeps retrying, it reports the following error:
    RequestorId: 8efc5304-f0a3-90f6-0000-000000000000. Details: An unhandled
    exception occurred during the execution of the workflow instance.
    Exception details: System.ApplicationException: HTTP 404
    {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["36"],"SPRequestGuid":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"request-id":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue,
    10 Feb 2015 22:36:44
    GMT"],"Set-Cookie":["BIGipServerpublishing-blv-80-pool=2825582466.20480.0000;
    path=/"],"Server":["Microsoft-IIS/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
    at
    Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
    context) at
    System.Activities.CodeActivity.InternalExecute(ActivityInstance
    instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
    System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
    executor, BookmarkManager bookmarkManager, Location resultLocation)
    If I created the list item, I can stop it and restart it without any problems, but this is not the case for list items created by someone else.
    What settings do I need to change so that I can start a workflow for a list item created by another user? I am the owner of the SharePoint site and am able to make changes to permissions if needed.

    You don't need to re-do the fields. If you create a new version of the PDF
    file just open the old one and use the Replace Pages command to insert the
    pages from the new version over the old ones. This will give you a new
    version of the file, with the existing form fields still in tact. Of
    course, you might need to adjust their location and/or size, but at least
    you won't have to start all over again...
    On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

  • Variable for Substitution for IN list

    Helllo all
    I have a problem... My query contains an IN list... eg.
    select *
    from table
    where product in (1, 2, 3, 4)The problem is, I need the same query to be able to process thing based on different product lists.
    eg. (1, 2, 3, 4)
    or
    (1, 5, 33, 87, 299)
    etc.
    How can I do this?
    Normally you could just use a variable, but that would only work for a single value.
    Is there any way to make a variable of the type of 'list' that IN uses?
    Thanks!
    Sam

    I've read the above solution by Tome Kyte (great place for answers:) for doing this and was wondering if someone could give me reasons/suggestions as to
    why the solution below is good or bad....
    Using the example from question above.
    select *
    from table
    where product in (1, 2, 3, 4);
    We accomplish this by doing the following:
    First build your list into a variable and make it a string with no quotes, even if it is a number as in this case.
    You can do this with various looping methods. Also, use a separator. Here we use a tilda ~ .
    So the above product list would look like the following:
    Declare
    v_Product_List := '~1~2~3~4~';
    Begin
    select *
    from table
    where INSTR(v_Product_List, '~'||to_char(product)||'~') &gt; 0;
    End;
    I know this isn't comlete but I think you can make it work for what ever case you need.
    Thanks for any feedback,
    Whitney

Maybe you are looking for