I need file "com.sap.km.cm.par" for EP6 SP 19

Hello all:
I need file "com.sap.km.cm.par" for EP6 SP 19. By error, I overwrote the original com.sap.km.cm.par and the com.sap.km.cm.par.bak into the deployment folder.
Could someone indicate me where could I donwload it from?
Thanks in advance,
Alejandro Gómez.
P.D.: Excuse my bad English.

Hi Alejando,
I will send it to you in some minutes.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers / actions on SDN. Thanks in advance!

Similar Messages

Location of com.sap.portal.dsm.par in SP23 of NW2004

Hi all,
For an issue discovered in SP22(SAP Note 1235253), SAP has provided a work around. Thats to take a file com.sap.portal.dsm.par from SP23 and deploy using SDM.
But i am not sure in which SDA/SCA this particular file is present.
Please let me know the SDA/SCA file where i can find com.sap.portal.dsm.par.
Regards
Venkatesh

Hello,
What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
Please help me on this and will give rewarding points.
Thanks
Luis

After deploying a customized com.sap.layouts.framework.par

Hi all,
after we deployed a customized com.sap.layouts.framework.par to our portal we got blank portal pages after login. Now we want to upload the SAP standard layout par file. How we can reload it? Or is it possible to deploy a patched SCA file via SDM? If this works how we can identify which software components needs to be redeployed.
Thanks in advance for your support.
Best regards.
Mike

Hi Mike,
It is not recommended to modify directly in SAP namespace. You must always copy the standard PAR file and rename to com.<clientname>.layouts.framework.par -> customize -> upload on Portal so that standard is not affected.
Now to recover from your current problem - do you have another Portal instance eg - QUALITY or PROD portal?,
if so you can navigate in that system to System Admin - Support - Portal Runtime - Browse Deployment - Download the com.sap.portal.layouts.framework.par.bak
In the problematic system - go to System Admin - Support - Administrator Console - Archive uploader - Upload the downloaded working PAR. (You have to remove the .BAK extension before uploading)
Hope this helps.

Please help me 2 find a Document for this jar file com.sap.workflow_api

HI,
I want to create a task in UWL using web dynpro application. For this I need to import the specified com.sap.workflow_api.jar jar file.
This jar file is in our WEB AS Server
path=
server\c\usr\sap\W01\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.workflow.apps\lib
I have browsed all over for a good document , i got just one link :
http://help.sap.com/saphelp_nw70/helpdata/EN/46/94b9b2b321581ce10000000a1553f7/frameset.htm
Could you help me out with a better document for This task and I want the complete document for this particular jar file com.sap.workflow_api.jar.
It wolud be very helpful if I could get it at the earliest.
Regards,
Boopathi M

HI Ayyapparaj,
I have converted my project to javadoc,but i don't get any document for specific class. only I got what ever method is avilable in our controller that corssponding method come over in the java doc.
How can i get the document for specified IWorkflow interface ? this com.sap.workflow_api jar file has IWorkflow interface. I need to know how to use this IWorkflow interface.
How to use javadoc tool ?
Regards,
Boopathi M

JAR file "com.sap.tc.logging"

If any one has this JAR file -- "com.sap.tc.logging.Category"
Please mail it to me-- [email protected]
Regards
pranay

Hi Pranay
When i try to create new DC it is giving me foolowing errors:
com.sap not resolved.
file_webdynpro_admin.jar etc.
how did u resolve it?please help me out
Thanks
Prasad

I need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training

i need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training from authorised center.how good it it to do prepare from unauthorised center and take exam in any country like australia ,US ?please help understand .

Hi Preeti,
please first understand the difference between a subject (your header) and its body line, please never write so long subject matter.
Now coming to your queries , what you thinks being at Australia or US is free of Cost. The first thing is that i don't understand your mission for taking Certifications, Are you a working proffesional because for more than 2 yrs. of working experience, you don't need any training , you can take direct examinations.
And if you are not a working professional, i don't thing taking any certification will serve any purpose in your job hunt, although it will enrich your Resume only, you will nothing get out of this from just taking a vertification
So, please tell us that you are a fresher or having real time working exposure in SAP SD module, then any one will guide you well.

Par file com.sap.portal.support.browse.par overwritten - where is original?

This is a bit embarrassing to admit but I had some serious finger trouble here and managed to deploy a new par file with name com.sap.portal.support.browse.par. This of course fu..ed up my browsing functionality in the support area and I need to deploy the original.
I tried to find it in my production portal, but I can't seem to be able to find the right location to download it from. Can anyone help.
I am on portal 7.0 sps 15.
Henning

Hi,
You can find com.sap.portal.support.browse.par par at ROOT/WEB-INF/deployment/temp on the portal production server. Then you can deploy it to the development system.
Regards,
Nikhil

Par file "com.sap.portal.navigation.detailedtree.DetailedNavigationTree"

hi,
can any one tell me where this par file is present.
"com.sap.portal.navigation.detailedtree.DetailedNavigationTree"
i have to modify delailed navigation ..i got iview for delailed navigation but i am not able to get code link for that.
please help me in that.
good ans will be rewarded.

cant we get from portal.
i mean all par file we can download from portal.
path is
system admin/support/portal_runtime/browse_deployment....
is it present there.?
thanks
jayesh talreja

Masthead logo changes thru PAR file(com.sap.portal.navigation.masthead.par)

Hi all
now i am customizing the Masthead par file by downloading the relevant par file from the server. after i intergrated the code into NWDS then i started to change the code in the headerIview.jsp in masthead.
now i removed the design bar as well as standard SAP logo(right end) sucessfully.
now i want to place our client in the place of design bar in the masthead.if i want to do the same where will i copy our client logo i mean in which folder in the workspace??
and also let me know where can i change the background color of welcome area and functional areas in the masthead into white color.
if u send with sample code then it is useful.
always i will reward max points.
note: i am following the masthead customization thru par file not from theme .
dont answers to change the logo from theme in portal. i want to change thru par file.
Regards
Sunil

Hi steelman
can u also tell me how to change the background color of welcome and functional area in the masthead into white color.
it is useful if u send the sameple code on this??
for this color change can we change in the CSS file or in JSP file??
if in CSS can u tell me how to do that i mean how to add that
standard CSS file
.activeLink {
     font-family:verdana;
     font-size:0.7em;
     cursor:pointer;
     text-decoration:none;
     color:rgb(32,75,162);
.activeLink A:link
.activeLink A:visited
how to modify the above CSS code if i want to change the background color of welcome abd fucntional area into white color??
Regards
Sunil;

Runtime error.Java.lang.nullPointerException: null at com.sap.guid.GUID.par

Hi experts.
My scenario is File --> PI --> File.
During the message mapping there are a few RFC lockups.
I have configured an communication component for the RFC destination, and a Receiver communication channel to the RFC system.
When I am trying to check the message mapping and the operation mapping from the integration builder every thing works just fine.
In the interface determination i have configured the rfc parameter for the mapping.
When I am trying to run the hole process i receive an error saying:"Runtime exception from: java.lang.nullPointerException:
null at com.sap.guid.GUID.parsHEXguid(guid.java:1015)
reguars Max

Did you test your operation mapping??
Did you provide your RFC communication channel name and import parameters value in paramter tab of Operation mappi
Yes I did.
I have tested the operation mapping and it runs just fine.
Also all the parameters are specified.
And the communication channel is configured.
Just to make sure the communication channel is configured well.
Should it be configured as RFC adepter and connected to the system on which the RFCs are located?
If this is all of the configuration needed i have already done them.
Any suggestions?
Regards Max.

Experts needed! com.sap.aii.af.ra.ms.api.ConfigException

Hi everyone,
This error has taken away my two workdays now. When I activate any sender file adapter,
the audit log output is:
Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
and it won't pick up any files. Please help!

Hi Fatih,
you could try the following :
check for SLD inconsistencies, e.g. is the Adapter Engine registered
[#764176 Error in XI due to inconsistent SLD contents|http://service.sap.com/sap/support/notes/764176]
If you are using a central SLD then check
=======
XI 3.0
[#720717 Reduce the number of System Landscape Directories|http://service.sap.com/sap/support/notes/720717]
PI 7.0
[#939592 PI Usage Configuration versus Central SLD|http://service.sap.com/sap/support/notes/939592]
Also use FQHN and ensure that the user
XIAFUSER/PIAFUSER
exists on the SLD and is defined correctly, i.e.,. the same as in the XI system, e.g. as a service user and not a dialog user
========
[#1031321 Self-Registration of Adapter Engine and RWB fails|http://service.sap.com/sap/support/notes/1031321]
Regards
Kenny

How is the com.sap.runtime.logon.par implemented?

Hi all
I want to make some changes to the logon.par file such that if the user authentication fails, I have to fire a custom RFC to check if the user exists in that backend system.
First of all, I have no clue about how I am going to implement this. Before jumping deep, I'd like to understand how the existing authentication works. Where does the logon get information about the user credentials?
Any information would be very helpful.
Thanks
J

Hi J,
The logon process is implemented through two layers, of which the one you have referred to is just representing the user interface, whereas the real logon process is implemented through login modules; for the latter see http://help.sap.com/saphelp_sm32/helpdata/de/46/3ce9402f3f8031e10000000a1550b0/frameset.htm
On both layers, you can determin if the logon worked or failed (to be concrete, the login module determins this by its own, whereas in the logon PAR you can determin the result of this process). So both layers could be used to implement this. As the login module is more generic, I would advise to use this, as this is also documented and supported, whereas in the login module you would have to modify the implemented logic (by decompiling or putting your logic into some existing JSP). The internal logic of the logon PAR is not documented (but not hard to understand when checking the JSPs and/or decompiling the code).
Hope it helps
Detlev

Anonymous com.sap.km.cm.xmlformpreview - urgent (goinglive)

Hi gurus!
We are to publish some news in our NW2004s Portal. News considered to be available for anonymous users. We use com.sap.km.cm.navigation based ivew in NewsExplorer fromat and anonymous authetification type. News details are shown with application com.sap.km.cm.xmlformpreview. Please advise me how to make this application runnable under anonymous user.
Thanks.

Hi Ivan,
Maybe this helps you, I documented a few years ago when I had to create a EFP with KM news. It then implemented it on a NW2004...
But after looking at it it could still do the trick, So its worth looking at it I guess...
To allow full anonymous access to the KM News a custom setting needs to be made to this default SAP portal module. If this customized settings is not made the portal will give a logon screens for the KM News pop-ups that are located on every market overviewpage. We do this in 9 steps.
Step 1: Login to the portal as an administrator. When logged in go to:
System Administration>Support > Support Desk > Portal Runtime
Go to: Browse deployment
Step 2: Go to: root/web-inf/deployment/pcd and locate the file: com.sap.km.cm.par.bak
Click: download to download the file to your local computer.
Step 3: The file will not download with the .par.bak file-extension because the portal zips it first (so donu2019t wory on that). Accept the file download by pressing save. Select a location on you local computer where you want to put the file.
Step 4: Unpack the file with your WinZIP compatible zip-extractor.
Step 5: Start SAP NetWeaver Developer Studio (from now on short: NWDS) and import a file by: File > Import
Select Import Source PAR file, and confirm with Next
Browse for the file. Donu2019t forget to set the filter option to .par.bak. or you wonu2019t find the file.
Select it and confirm.
Copy the first part of the file name from u201Ccom.u201D Till u201C.par.baku201D and Paste it as the
Project Name. Select a folder where to create the project. Confirm by pressing Finish.
The .par.bak file is imported in to a newly made NWDS Project.
By default none of the libraries are imported into the NWDS Project so we have to copy them manually into the proper folder.
For that we need to open the Windows File Exploreru2026
Step 6: Browse to the folder that contains the .par.bak file that you unpacked under step 4.
Select the .par.bak file > RightClick > Open with > Choose Programu2026
Choose your WinZIP compatible extracter as the executable to open this file. In addition you can check the ckeckbox: u201CAlways use the selected program to open this kind of fileu201D. Confirm
After you confirmed a WinZIP window will pop-up. It shows the content of the .par.bak file.
Cascade the NWDS behind the WinZIP pop-up and start a Drag & Drop action on the *.jar file(s). Drag it to the /dist/PORTAL-INF/private/lib folder and Drop it
The Project is made and all files are imported. We can continue to the next step and Edit the moduleu2026
Step 7: Within NWDS browse to: com.sap.km.cm/dist/PORTAL-INF
Look for the file: portalapp.xml
DoubleClick it and open the tab u201CSourceu201D.
For the componentu2026
<component name="xmlformpreview">
We have to add the following tag inside the <component-profile> tag:
<property name="AuthScheme" value="anonymous"/>
Save the file.
Step 8: Within NWDS RightClick on: the project and Select: Export
This will initiate the Export Wizard. Go trough this steps:
u2022     Select Par File (selected by default) > Confirm with Next.
u2022     Select the project (selected by default) > Confirm with Next.
u2022     Export location will be the Module folder by default (leave it like it is) > Confirm with Finish
The module is exported as .par file and ready for re-deploymentu2026
Step 9: Again login to the portal as an administrator. When logged in go to:
System Administration>Support > Support Desk > Portal Runtime
Go to: Administration Console
Browse tot the NWDS Project directory and select the current Project folder.
Select the .par file and confirm this action.
Last but not least confirm the re-deployment by clicking Upload
The customized module is now re-deployed on the portal.
Good Luck!
Benjamin Houttuin

How to use transport and can u transport par files?(like runtime.logon.par)

Hi team,
I'm new to Portal and i need to move everything i made from DEV to PROD.
Can you please help me out where i have to start?
If i look at the transport (exporting) i see that i can only add iviews and pages, but i can't find my uploaded par file (com.sap.runtime.logon.par) within the content folder as it is in u2013 Support u2013 Portal runtime u2013 browse deployment -> com.sap.portal.runtime.logon.par.bak.
Regards!
Michael

Hi!
Oh yeh, its that simple :o thought i had to do this through transports but...
I think i was just stressing out at that time
A big thx,
Michael

Can't See com.sap.portal.runtime.logon in list of PAR Files in Iview Wizard

Hello All,
I am trying to create an iview from PAR file com.sap.portal.runtime.logon which is the logon par file that has the logon page. But when I right click a folder in the PCD and click on New From PAR Iview I try to find on the list of available par files and I don't find the one named com.sap.portal.runtime.logon
Can anyone tell me if this has to do with the portalapp.xml file from com.sap.porta.runtime.logon.par file.? or with the Security Zones defined in portalapp.xml? Or does someone know why this PAR file doesn't appear on the list and how can I make it appear on this list of par files?
Any helpful ideas to solve this issue will give rewarding points.
Thanks
Luis

Hello,
What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
Please help me on this and will give rewarding points.
Thanks
Luis

I need file "com.sap.km.cm.par" for EP6 SP 19

Similar Messages

Maybe you are looking for