I NEED FLASH HELP/ NOT SEEING SOME SITES
I have a dell computer with a ati2400 video card. I
have three browsers, IE7, firefox3.0, k-meleon. I had Opera,but had
to unistall it because it would play only 80% of the flash videos
yet fiefox and k-meleon played them all I installed k-meleon after
uninstalling opera. I installed flash player 10.0123 for mozilla
browsers on saturday and everything was fine. Today I found that
all my browsers would only show about 85% of flash videos. I'm
freaking out because IE7 is a different flash plugin than firefox.
This is what i found when I scanned flash players. I have the
upgrade plugin for mozilla browsers 10.0,0.12, then I have two
flash plugins 9.0.124, one flash player Helper 9.0.115, and two
NPSWF32_FLASHUTIL.
I am at a loss when it comes to flash players. I upgrade
when I get a notice, but I know your not supposed to have more than
one player for mozilla browsers and one for microsoft browsers?
Right? Is this why now i have the same problem as i did with my
opera browser? I tried a system restore to before the flash upgrade
10.012 was installed and nothing changed, i still had the same
problem. HELP, What gets uninstalled, what stays and will this take
care of my flash problems? I spent months with the Opera problem
and read on opera and firefox forums people who had flash problems
say they uninstalled and reinstalled flash and no change. Sorry
about the long post, I'm very sick and this is the best i can
do.
Hi. The actionscript is from a Flash Mask Effect template
that I was asked to make image and text changes to. I don't know
what the repetitive aa and bb does. The clip works well except that
I can not get it to Stop after the last image, it just keep going
and going...
Thanks.
Similar Messages
-
DW 4 not seeing GoLive .site file!
I have several sites created in GoLive 7. I downloaded the GoLive 9 free trial, brought them over into GL9. Then I did the "Convert Site to New Structure" command as I have seen suggested. Downloaded the GoLive to DW migration extension and installed it. So far so good.
But when I go to Import GoLive Site, and navigate to the folder where the site file is (there are actually several, only one is the current one), Dreamweaver does not "see" the .site files, even though when I look in the window in explorer, they are there. All I see are the web-content, web-data, and web-settings folders, but no .site files at all.rich.leach wrote:
> no, the file was not open, and I tried all of the
various search options
> available in the DW Find feature, especially after this
issue was discovered.
> And if DW customers are required to register particular
file types with DW in
> order to have the application successfully search those
files, that would
> warrant a special instruction set or at least a dialog
box somewhere in DW,
> wouldn't you agree???
This is an issue that I have never come across before. You're
using a
non-standard filename extension, so it doesn't particularly
surprise me
that Dreamweaver ignored it. Have you tried entering
.properties in the
list of filename extensions, as I suggested? If that works,
your problem
is solved. All that's needed is for the documentation to be
made more
explicit.
On the other hand, if your filename extension is likely to be
in
widespread use, perhaps it's something that should be added
to the
standard list of files that Dreamweaver handles. Submit a
feature
request to the Dreamweaver team.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Why i can't see some sites that before i use to see it
Why I can?t see some sites that before I use to see it?
What sites aren't you able to see? They may have changed their web design to not be so accessible. See my FAQ* for alternative browsers:
http://www.macmaps.com/browser.html -
Elements does not see some files
I have folders in which Elements shows fewer files than Windows Explorer, and I can open the files with Explorer that don't show up in Elements, and Elements does not see them when I try to reconnect or find them. Why does Elements not see some files, even when you try reconnecting?
I think I may have moved these files with Elements into a different folder, and then copied them back into the original folder with Explorer, so there are now two copies of the same files with the same names in different folders,
In this situation, PSE is most likely saying (in its very unhelpful way) that the file you're trying to import is a duplicate of one that already exists in the catalog. PSE considers a file to be a duplicate if it has the same name, size, and last-modified date/time.
If you want a duplicate of a photo in the catalog, select one or more thumbnails and do File > Duplicate.
What's the reason for wanting the duplicate photos in the catalog? There may be other ways of accomplishing your goal without making duplicates. -
Hi!
I very rarely happens, I have an iMac 27 "and I can not see some pages.
On the contrary I can see all the pages on my MacBook Pro.
Both computers are in the same table with the same wifi.
In Safari "I think" have the same configuration but it has to be no.
How I can see the pages on my iMac if I look at the MacBook Pro?
Thank you!
PS: sorry my englishPower cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212 -
I can not see some dvd films .. couldn t open dvd films..
i can not see some dvd films .. couldn t open dvd films..
so you inserted dvd and couldn t open them .. got to be more specific .. which films, what else is happening ..
-
Firefox can not open some sites but no error is reported
== URL of affected sites ==
http://www.aol.comyea, that has happenend to me as well.
Well this is what has happenend to me anyway.
I will go to the apple site and enter the discussions forum, and the blue bar in the url box will jsut hang for minutes sometimes. THen the page will finally open as well as the blue bar will show up all the way.
But then i will click on say , the safari forum, and the blue bar will open just alittle, though the page will not, and ill wait anoither 2 minue and it finally open.
is this what they call, "hung up", or "hanging?"
but mine doesnt time out, i get no error message. Just th spinning ball , and sometimes no spinning ball.
lol, whoes post is this?
sorry -
Safari not opening some site addresses - highlights only partially & then will not open.
Safari is not opening some site addresses - only partial address is highlighted, then stops. I am new to Mac.
Thanks,
KMGo step by step and test.
1. Power cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
2 Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
3. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions -
I'm running Acrobat 8.1.2 on a G5 1.8 Dual with OS 10.4.11. I have Enfocus PitStop Professional 7.22 installed.
When I add comments or open a file with comments, I do not see them displayed. They are in the comments list; and if I summarize comments, I see them in the summary pdf/printout. It's almost as if I have something switched off, but I can't find it. It's possible this is related to PitStop install, since that's what's unique on this machine. Other machines display the comments just fine.
Any help would be appreciated.In RoboHelp 7 tables were created using inline styles. Things changed in RoboHelp 8 when CSS driven tables were introduced. You can use one of the supplied styles, you can edit one of them to create your own style or you can create a new one. There is some more information about this in the RoboHelp Tour on my site.
Once you have a style set up, you can change your existing inline tables to CSS driven tables. Right click in a table and select Table Styles. You will then get a dialog enabling you to pick a table. Tick the box to clear the old inline styling. Note that you will need to reapply any table / column widths. They will look good in the Design Editor but not in a browser.
I suggest you make a copy of the project and play around with that until you have got things working as you want.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Can not see some videos, Can not install Activex 9.o47
My name is Alex, I have been working on getting flash to play
for about 3 weeks.
I have uninstalled both shockwave and flash many many times
using all different sites. I have turned off my firewall,
anti spy, and antivirus when downloading. I have shut
everything down that was running. I have closed everything.
I have restarted each time between downloads. I have then
downloaded the install from many many sites. Closed everything, and
installed.
I have uninstalled from ADD/Remove. I have reinstalled. Now,
when I go to ADD/Remove programs it shows that both Flash and
Shockwave are there.
Seriously, I have downloaded and uninstalled and installed so
many times from so many sites.
Each time the screen shows I have done it successfully. But I
cannot get it to play. I have turned off all popup blockers that I
know of.
I still run my anti virus, firewall spyware etc. But says
there is nothing to prevent Flash from playing some of the pages I
use to see.
I have done a Reg clean. And I have installed after all that
and still does not work.
I am the admin on the computer and I am the only one who runs
it. I use firefox for my browser but I tried to get it in IE and
still nothing.
Everything was going absolutely fine till I done the stupid
mistake of updating my Flash player,
seen then my computer is going banana, I don't understand why
is that,
I can actually see U tube videos, but I can not see other
videos like trailers from IMDB, <Your browser is blocking
display of our video player. If you would like to see the video,
please turn off any ad-blocking or Flash-blocking software that you
are using>.
That's what he said on the screen where the video suppose to
play, I can only see advertising, It should be the other way
around,
and even the news on yahoo I can not see them, only ads.
I had no problems before, no pop up I could see the videos
absolutely fine and especially no ADS and then that days,
I wish I could cancel that day, I'm try to fix this problems
all ready 3 weeks and nothing, I did try everything but nothing.
I have download flash Player 9.0.47.0 manage to install but
found impossible to install Activex 9.0.47.0 seems to be impossible
I do know why. disinstall everything reinstall but nothing,
# Select Start.
# Select Run.
# Type cmd
# In the command window, type the following:
uninstall_flash_player.exe /clean
The answer is: uninstall_flash_player.exe is not recognised
as an internal or external command,
operable program or batch file.
does not work, try million of time, does not work.
Does anybody know why?You are not the first one to notice..................
http://forums.adobe.com/thread/748720?tstart=0
Please do submit a request for it to be changed www.adobe.com/go/wish -
Flash Help Not Updating on Web
I've uploaded a Flash help project to our web site. But the
latest information is NOT showing up, no matter how many times I
click refresh or clear out the associated cached files. I've even
deleted all the items on the server and re-uploaded the entire
project. I've verified that the file sizes and dates are
identical...
Yet the browser is showing an older version.
Any else experienced this? And how do I fix it? It's
happening in both IE and FF.
Thanks in advance.Hi Jared
Are you certain that the server has been updated? I've been
in a few development environments where you uploaded initially to a
staging server. Then after a certain period of time, the staging
server would update to one or more production servers. So depending
on the timing as well as the server you are accessing at the time
(Important to note that, as load balancing and whatnot can present
different servers depending on the load) you may see that help has
updated properly on one server and the next page refresh shows it
hasn't yet updated to the other.
Things to ponder... Rick -
I can not see some parts of web pages, some things are visible others not.
In my mail program most of everything is viewable but the different styles that are available to use above the body of the message are not able to be seen. I can run my mouse over the different spots in the cell to see what that space is but you cant see it. On some web pages that I shop on all the details are available but the buy now button may be doubled and overlapped or just not visible. If I scroll with my mouse over the open areas I can usually find it but not see it. The screen also looks very bright, I've tried to change the colors to try to get the missing data to show but it's been no help. Oh, even now the button to submit this is not visible and the troubleshoot information box is only visible when scrolling over it. Thanks for any help
See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong -
Safari not loading some sites.
I don't believe I have changed anything in Safari, but this problem has recently started occuring.
Half the sites I go to won't load properly. It seems to try, as the progress bar begins to fill, but after a couple of seconds it gives up and leaves me with a white page. The activity window shows the page as being 1 byte in size.
This seems to happen more often on some sites than others, whereas some will not be affected at all and will work fine. Some of the offending sites will also load if I copy/paste the link into a new tab, but not if I reload.
It also occurs in the latest Webkit build (34130) but not in Firefox (3.0RC1) or Camino (1.6.1).
I've tried resetting Safari, but to no avail.
Any help would be greatly appreciated.RainbowWarrior1 wrote:
Half the sites I go to won't load properly. It seems to try, as the progress bar begins to fill, but after a couple of seconds it gives up and leaves me with a white page. The activity window shows the page as being 1 byte in size.
This seems to happen more often on some sites than others, whereas some will not be affected at all and will work fine. Some of the offending sites will also load if I copy/paste the link into a new tab, but not if I reload.
I have the same problem, and often end up going back to Firefox as a result.
Also, Safari will very often not load www.hotmail.com. I get the following message -
"Windows Live ID is unavailable from this site for one of the following reasons:
This site may be experiencing a problem.
The site may not be a member of Windows Live ID.
If I clean out all the hotmail related cookies, it then does usually load, but what a pain. I recently made Safari my preferred browser, but now regret having done so. Since this seems to be an Apple problem, hope they resolve it soon. -
Unity does not see some Lotus accounts...
Good Afternoon. We are having a problem with Unity and Lotus. Last week we had an issue come up and had to restore our Lotus Domino address book from the previous day backup. After doing this and getting Unity and Lotus stable again, there are some users that their voicemail doesn't work. Although the user is in the Domino address book and has a mailfile, Unity does not see them in the list so that we can try to recreate voicemail box. We have about 2000 users and only about 50 are not showing up now. I checked the person documents and they still have all the hidden AVP fields and fields on the ucprofile in their Domino mailbox. Not sure what to do now... Any help would be greatly appreciated.
Thanks,
JasonI think I may have moved these files with Elements into a different folder, and then copied them back into the original folder with Explorer, so there are now two copies of the same files with the same names in different folders,
In this situation, PSE is most likely saying (in its very unhelpful way) that the file you're trying to import is a duplicate of one that already exists in the catalog. PSE considers a file to be a duplicate if it has the same name, size, and last-modified date/time.
If you want a duplicate of a photo in the catalog, select one or more thumbnails and do File > Duplicate.
What's the reason for wanting the duplicate photos in the catalog? There may be other ways of accomplishing your goal without making duplicates. -
Iweb 06 firefox not seeing some images
i am working with iweb 06 and when i put my website on my .mac people running firefox cant see some of the images on the page. I took the site down for now but hear is the link to the page that is up with is one having the trouble. http://www.eclipse-vision.com/
went to dreamweaver
Maybe you are looking for
-
Sync in PSE 9 for Mac Not Working
I'm using PSE 9 on a MacBook Pro with Lion. Although my initial sync worked, now my Catalogue shows sync pending for numerous Albums I have just cleaned up, but won't sync after many tries. When I go to Organizer Sync Preferences I repeatedly get
-
when i open my wimax program appear "SDK Init or open fail " my program is ( mada xenon CM) it was work but next week when i open it show me "sdk init or open fail "
-
How do I install plugins for PSE 11
Cant find tutorials, cant find nuthing on getting my Topaz and Perfect Effects 4 to show up.
-
Laptop will not power on even after hard reset
hello, this laptop had a problem with the keys not typing, it was working fine the other day, then it suddenly would not type, i had to use on screen keyboard to log on , i had done a few thing like check filter keys were not on etc, when i was googl
-
How to do application failover?
I'm using weblogic cluster and oracle http server as loadbalancer. As we know: "mod_wl_ohs only support container level failover and NOT application level failover. mod_wl_ohs continues to route requests to a down application as long as the managed s