I need good advices for a Nokia N95 please...

I'm going to buy a Nokia N95 from a GSM Store near me and I wish to check first if the phone it's original. I know that there are some things I must check ( The star *, the seventh and eighth digit from IMEI, the size of the camera, if there is written Nseries on the back of the phone,under the Nokia logo) but anything else I don't know....so is there anything that I can check which is only, and only for Nokia original phones....something that the replicas don't have? I'm asking this because I deeply want not to get hoaxed.
Thank you so much for your help,
David

look carefully under the battery where it was make if its not Hungary or Finland it might be fake...
look at the menu and touch the landscape menu and there you can see if it works good or its a fake..I had an N95 and it was made in finland at everything was ok it was original but before i bought it I payed attention at battery, production country, camera settings and qualitty, the slide and the quality of screen..If its fake you can observe pixels on the screen faster then at the original phone...
I hope this would help you

Similar Messages

Hi need good suggestion for future

hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advance

the future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think.

Facebook Client for the Nokia N95

Hi
I was wandering if that there will be a facebook client for the nokia n95.
I know they have released one for the nokia n96, which comes with the new update, but they don't seem to have one for the nokia n95.
Does anyone know when there will be one released?
Thanks

That is very strange. I am in Ireland and it is available to me. Try this. Goto to www.ovi.com, select store, set your phone type to N95 and search for Facebook. Even if it does not allow you to download the Facebook client, there are plenty more apps that also support Facebook.

HT201210 i try to do several times... to recovery my ipad 2 wifi...but it gone off mode..what i must do.. i'm university student ..i need my ipad for tomorrow lecture..please help me

i try to do several times... to recovery my ipad 2 wifi...but it gone off mode..what i must do.. i'm university student ..i need my ipad for tomorrow lecture..please help me

What version of ios do you have?
See Texas Mac Man's write up here.
My iPad won't connect to my home wifi - even though it has previously worked fine. It says it is unable to connect? - any ideas

Need good template for Artist - Must have GOOD instructions

Hi.
I'm not a total Newbie, but I'm looking for a nice template for artists. The important thing is that it has really good instructions for customizing it. I'm not totally new, but I don't have the time to learn right now so the instructions need to be really basic. No "assuming" I already know CSS.
It needs to have the ability to show lots of pictures and blow them up when clicked. I'm willing to pay for it as long as it's doable.
Thanks.

I haven't thought about using Wordpress. I know a lot of people use it. Would there be a steep learning curve going that route?
Any learning curve is subjective. Try it and see if it's a good fit for you.
Wordpress is widely used by novices and experts alike.
Actually, I remember now that I did look into it but found that being on a Mac there were some extra steps involved getting started and I couldn't find explanations or definitions for some of the terms.
There are no extra steps for a Mac compared to a PC that I'm aware of.
Ask specific questions about terms and you'll get specific answers.

PLEASE SOLUTION FOR MY NOKIA N95 8GB

Whenever i try installing or uninstalling any software on my nokia n95 8gb , it tells me 'unable to start operation, installer already in use'. please any help?

The N95 is quite an old phone now and if you've never done a reset on it, there may be a lot of bits of conflicting data hanging arround on it, Just back up your contacts, calendar and notes ONLY, then dial *#7370# followed by 12345, the phone will reset like new, but you'll have to reinstall all your apps and settings, it should however resolve your issues and leave the phone much quicker and more responsive.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Need good tutorial for J2EE

Hi All,
Can anyone help in out in finding a good tutorial for J2EE.
I wanted to have glimpses of this technology before delving deeply into it.
Also please suggest some good reference books on the same
Thanks
Ankush

I'm afraid there is no quick way of learning J2EE. Of all the people on this forum only a few have truly mastered the framework. I suggest you learn it step-by-step by following the tutorial. Read the introduction to give you a glimpse of the technology and then, dive in....
The way I learned it was by building a three-tier website based on Servlets, JSP and EJB. After a few days/weeks in hell, I had an overview of the technology. I suggest you do the same.
As for book suggestions : stick to the standards. You (almost) can't go wrong with Wrox or O'Reilly.
Success,
Mike

I need fm transmit for my nokia e72 :(

how can i get fm transmit for my nokia e72??

Hi,
FM Transmitter is a inbuilt hardware of the handset. So you would not be able to get a FM Transmitter for Nokia E72.
"If this post helped you solve your query, please do click the KUDOS tab."

Help with my nokia n95 please.

Hi all.
I am with 3g network, i had a free upgrade a few months ago, did not like the mobile they sent me ( nokia 6288 ).
So i bought a brand new nokia n95 from ebay, locked to vodafone network.
I had it unlocked saturday and put my 3g sim card in it.
The phone is working, but i could not send picture messages or brow,s the web.
I managed to sort those 2 probs out with the help of the nokia website, had to download 2 codes for my phone.
does anyone know how i can get my gps to work with the 3g network ?.
I did phone my network provider, and was told it will not work, becouse my n95 needs to be locked to the 3g network.
Can anyone help me please.
Regards
Ken.

Hi kenbo
Although "voice navigation" requires purchasing a license, GPS feature is not network dependent. You can however have a free "3 day trial"
Firstly if you are using v12.0.013 software on your N95 it is a lot quicker to obtain fix with A-GPS feature, although an active connection via WLAN or Network is needed.
Go outside away from buildings and tress with clear view of sky. Open slider and hold phone at 45degrees, don't cover "#" key as GPS antenna beneath it. Low cloud or rain will make satellite acquisition a lot longer.
If you go to Menu > Tools > GPS data > (searching for + calculating data) > Position > Options > Satellite status
This shows any number of satellites up to five - empty rectangle = not locked on - black filled rectangle = signal acquired; you need a minimum of 3 solid bars for lock-on and triangulation to work!
Depending upon which version of Nokia Maps is installed on your N95 you may either have satellite icon bottom right of your screen or satellite icon with three yellow or green lights.
Happy to have helped forum in a small way with a Support Ratio = 37.0

I need a solution for the security questions please ?? In the other hand i can't use the rescue email !! I need help .

I need help for those security questions please !! I don't have a rescue email and even i don't know how to add it ! Please help me

I didn't mean to give me an answer for the security questions i mean that i didn't remember the answers and i don't have a rescue email to send in it , i'm just ask for sloution to reset my security questions got it?

I need the password for BronzeZebra-guest. Please help asap

I need the password for BronzeZebra-guest. I don't know how you find this or get it but I need it now. Please reply to [email protected]

If you have Cisco Connect open it up & look around & it should show the passwords for both main & guest. At least mine did when I could access it.
Kathi

In need of advice for backing up HD Video

So we returned from a vacation,
where I shot all the video in HD 1080p.
We got back, and I used Final Cut Express to convert the AVCHD files from .mkv to .mov files.
All together, the total files come to a whopping 78.93 GB. Wow.
I need to back these up to DVD's or something
(My wife says she doesnt want them on an external hard drive, her last one died)
is there a way I could compress these?
or should I use quicktime/visualhub to bring down the quality a little?
any advice would be greatly appreciated
thanks

Solutions:
1) ignore the wife and backup to a good hard drive such as a LaCie quadra. usb or firewire.
2) Buy Time Capsule and backup to it.
3) what would i do? Use MPEGStreamClip to make mp4 files , to control the file size. The picture will still look very good but it does not do 5.1 channel sound. Handbrake does but since the file is HD probably will crash while encoding so will VisualHub. Another consideration, MPEGStreamClip on a 2 gig HD movie will take 15 hrs on a Mac pro let alone an iMac.
Currently not too many programs will do HD encoding.
4) backup to optical disc, I'd never do that ; too many compatibilty issues with different drives perceived for future usage.
5) back to the wife, user should alway have three backup stategies; ie main drive then backup # 1 then backup #2. I've backup to external and internal hard drives for over a decade without problems.
Message was edited by: Smokerz

Need quorum advice for production configuration...

I am trying to define a policy for how we will use the new Quorum feature when our project enters production. I have read the information in the manual but would like to confirm that I understand how it works as well as get some more advice!
We are running a cluster using a "cache beside" pattern where the cache is pre-loaded with the full dataset at start-up and after that kept in sync with the database using XA (2PC). No eviction or lazy loading is used. If we loose any data due to to few remaining nodes to hold the full data set we needs to stop service while we re-load the cluster from database (may take in excess of 20 minutes so this is quite bad!). We will run multiple Coherence nodes (probably like 4) on each storage server (they will be configured with the same machine-id) and the number of storage servers and application servers will most likely be 3 and 2 at our first very limited deployment. When at full capacity this may grow to perhaps 8 and 5 or even more. Due to the low number of storage servers (in particular in the initial deployment) we intend to keep spare memory capacity for only one server failure. We will use two "role names" lets call them "storage" (for the storage enabled nodes) and "app-server" (for the non-storage enabled nodes).
In the initial limited-deployment scenario (3 storage nodes) we will (if I understand Coherence properly) actually be able to handle a second server failure (if it occurs after re-balancing from the first is completed) but the cluster is then running in as vulnerable state since Coherence will not maintain backups when all remaining nodes have the same machine-id (this is good since we with a single server would not have room for both primaries and backups).
Q1. I would ideally like to be able to get the same effect in the larger cluster - i.e with say 8 storage servers (32 storage nodes) I would still like to drop all backups if a second server fail (after the first re-balancing has terminated) since this would allow the cluster to continue operating (in a vulnerable state) rather than break due to an out-of-memory state (if we loose more than one storage server there will not be room for both primaries and backups). Is it hoping for to much that this can be achieved using the Quorum settings?
Q2. Cluster Quorum - Ideally I would not like to loose more than one node (I could actually tolerate to loose all nodes on a single server but there is no way to specify that) due to a "temporary" network outage (since loosing more is very likely to result in lost data and a service outage while re-loading the cluster) but how far towards that goal does this setting take me? Or more generally what is the pros and cons of specifying a high value here?
Q3. Distribution/Restore Quorum - What scenarios are these settings intended for? Do they apply to my case outlined above in Q1 (to avoid new backups to be created when fewer than a specific servers are available) or?
Q4. Read/Write Quorum - Seems straight forward in our case. If the clusters drops below the number of nodes required to hold the full dataset both reads and writes should be blocked since writes are likely to fail (will be caught by our XA transactions but may as well be blocked out already by Quorum) and reads/queries may be incomplete. These values (at least write) should of course under all circumstances be set to a higher value than the number of nodes / 2 to avoid "split brain" ....
Any comments, corrections to my understanding of Coherence error recovery (or Quorum functionality) is warmly appreciated!
/Magnus
Edited by: MagnusE on Oct 12, 2010 11:02 AM

I'm currently using an older version of Final Cut Pro-- version 5.0.4.
That will not run properly on your iMac. Your iMac is an intel processor. You need at least 5.1 to run on an intel processor. There was an update available years ago but not currently. You need to upgrade your FCS to work with AVCHD. The cost is only $300 for the upgrade. You need it to use your camera and your iMac.

Need conceptual advice for 16:9/4:3 menus

Hi,
First off I should say that I am undertaking my most ambitious DVD project to date and I am in well over my head. I want to order a book(s) and would appreciate any advice regarding which book(s) might best deal with the type of issues I am about to explain. BTW I am still using DVD Studio Pro 2.
So here it is:
I have a 16:9 feature and 16:9 menus. My issue is their appearance in 4:3.
When displayed on a 4:3 monitor, I want the 16:9 menus cropped to full frame (pan and scan) and the feature to play 4:3 letterboxed. Since it seems like there might be some counter-intuitive aspects to this process, some general conceptual guidance on the authoring and menu design would be great. I am hoping that the authoring can be done with this sort of “mix and match” way and not pan and scan OR forced letter box for both menus AND video. Here is what I am sussing out so far:
1) I should set “force to pan and scan” in the disc inspector. I am assuming that this setting is ONLY for the menus (as they appear on 4:3). And if I am forcing a pan and scan crop of the menus I can just use the same overlay file for both 16:9 and 4:3. I just need to make sure my 16:9 menus are visible and can function once cropped to 4:3.
2) Regarding the video tracks: It looks like I might have to put the feature on two different tracks, one designated to play 4:3 and the other to play 16:9 letterbox in the track inspector? (why it is not labeled 4:3 letterbox and 16:9 is still a mystery to me). And it is at this point (that soon!) that things start to get cloudy. Because suddenly it seems that if I do that, I need two separate menus (rather than the 16:9 doubling as the 4:3), a16:9 one to point to the 16:9 video track and the 4:3 to point to the 4:3 letterboxed video track. Ideally a 16:9 the menu would point to track 1 and it would play 16:9, and when watching a 4:3 the 16:9 menu would automatically crop to 4:3 letterbox and point to track 1 which would then play 4:3 letterbox. Is that just some crazy dream or can it really work like that? So what is the story here?
3) If I am forced to use two separate menus, a whole other series of questions are raised. But I won’t go there just yet.
So you can easily see that I really have little idea of what I am doing in this regard and am in need of some expert advice. Thanks in advance.
-Thomas

Hi Thomas
If you are using DVD Stuido Pro 2 Force to Pan and Scan doesn't work. Not sure if it works in later version of DVD-SP (Don't think it did in V3 and not sure about V4). We do quite a few widescreen 16:9 movies and I'd do it like this: If you feature is 16:9 set that to 16:9 Letterbox. On the Disc Properties (i.e. click on the disc at the uppermost part of the disc layout set the Menus to Force to letterbox. Create your menus in 16:9 and set them to 16:9 Letterbox.
That way when the disc is played on a widescreen set the menus and track will display as widescreen (as they should) and when played on a 4:3 set they display with Letterbox - apart from the fact that the Force Pan and Scan doesn'y work properly (the highlights on your menus won't line up properly), I personally think this is preferable... especially when it comes to the movie itself. When a movie is Pan and Scanned on broadcast tv (which happens less and less these days) the film's action is "tracked" so that the most important info is displayed on screen and Pan and Scan Vectors are created. If you set your track so that it displays as 4:3 on a 4:3 set then basically you will only see the centre of the screen/action. Why would you want that? I thiunk most people with 4:3 sets are used to seeing widescreen letterboxed movies these days.
Hope that helps
Steve

Need a Advice for move from peoplesoft to SAP BI

Hi Experts,
I am working as a peoplesoft Technical consultant in a MNC past 2 yrs .
I want to change my domain to SAP BI. I need a suggestion.
SAP BI Training already completed. But in my it's not possible for change so please advice how i will highlight in Resume.
So that i will get calls for intv.
Please guide my Guy's.
Regards,
Mohanty.

Hi Yxu,
I see what you mean now. It sounds like you'll need to pull in the tables from various studio databases and also edit some of the native studio application tables to associate the new tables. Unfortunately I've never tried this and don't have any instructions I can share with you. In terms of the portlets, i'm not sure how easy it would be to migrate them. You could upgrade the various WCI instances to 10g then use the migration utility to move the studio portlets to your main wci 10g instance. Or like you said, create new portlets. Keep in mind direct manipulation of your databases can render your product unsupportible by technical support. The more supportable alternative may be to just build all the studio databases and portlets from scratch in the new instance.
Regards,
Ryan

I need good advices for a Nokia N95 please...

Similar Messages

Maybe you are looking for