I need help: 2 problems on Premiere CS 5.5

Hello everyone, I'm working with Premiere CS5.5
I have a PC with 16G memory, video card, GTX570, I7 2600 processor
The problem is this:
1. When I work with computer M2TS files works smoothly, but when I work with three layers or more, Premier works very slowly.
I've set up the engine mercury still does not help.
2. When I work with 3 layers and over in MPEG (can be any format) Premier replicates the layers, for example: If I take three different layers, and places them one over the other and divide the total of the program equally, and I press PLAY, I see first layer as the third layer, although the layers are not identical, then when I click on the STOP and presses on program window one of the layers, the original image back, then I press PLAY again I have the layers replicates.
Hope I explained well.

In this picture we see the program window layers 1 and 4 the same even though the video sequence 1 and 4 are not same
Here you can see that the layers are not same.
But it shows me only if I click on Video 1 with the mouse and not in play mode

Similar Messages

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Need help: Problems with exported Dreamweaver html file in different browsers

I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded. For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook. Does anyone know how to help with this, or had to work around this problem in the past?
I've attached our html file as well.
We're an eco startup with limited time and budget - so any help you have would be so appreciated.
Thank you!!

 World Centric Monthly Newsletter August 2009
Palo Alto Joins the Ban Against
 Non-Recyclable Materials
 This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
 by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
 Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
 to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
 were not addressed in bill’s contents.
 Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers. There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
 are present in 100% of all human fat tissue in the
 United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
 PS is rarely recycled and does not biodegrade. Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
 to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010! For more information about polystyrene
 visit Earth Resource. For a partial energy, emissions and water analysis
 of polystyrene and its alternatives visit our website. World Centric Compostable
 Hot Cup Lid
 World Centric is pleased to announce we now offer a fully compostable hot cup lid that
 fits our 10oz, 12oz, 16oz,
 and 20oz paper hot cups.
 The lids can be ordered in cases of 1000 or packs of 100.
 For more information or to order, please visit our website. This Month
 We’d Like to Applaud
 Project Open Hand
 San Francisco's non-profit
 organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
 California’s San Francisco and Alameda counties.
 Programs include meals, groceries and nutrition information as well as education and referral programs
 for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
 and staying healthy.
 Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
 If you are interested in making a donation,
 please visit Project Open Hand.
 Help Project Open Hand continue to do what it
 does best – deliver quality food to those in need.
“World Centric has gone
 about every aspect of
 business in the most
 sustainable of ways.
 It is a model for socially
 responsible business.”
 Ari Patz
 Styrophobia
 Industry Trends
 Although PLA is a sustainable alternative to a petrochemical-
 derived product, its limitation has
 been not only its cost, but its inability
 to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
 However, researchers at Teijin
 (formerly in partnership with Cargill)
 have improved their plant-based
 ‘Biofront’ PLA polymer to be able
 to withstand higher temperatures –
 by modifying its hydrolytic resistance.
 Get more information here.
 Get Great Deals!
 Check out our clearence items.
 Did you know?
 Styrene can leach from polystyrene.
 Over the long term, this can act as
 a neurotoxin. Studies on animals
 report harmful effects of styrene
 on red-blood cells, the liver, kidney,
 and stomach organs.
 US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.
 Where to Find us:
 CRRA Conference
 August 2 - 5
 Palm Desert
 Western Foodservice
& Hospitality Expo
 August 30 - September 1
 Livable Green
 September 19
San Mateo
 Find us: World Centric
2121 Staunton Ct. Palo Alto, CA
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.

Need help opening Adobe Premiere Elements 11

I purchased a package deal with Adobe Photoshop Elements 11 and Premiere Elements 11. The photoshop portion is working fine, but I can't get the premiere to even open! I click on the icon on my dock and nothing happens. There is another icon on my desktop (main screen) but it only gives me an option to 'un-install'. Is there a phone number to call for Adobe support? I need real help!!??

Welcome to the forum.
As the biggest cause of PrE not launching is an obsolete video driver (PSE does not rely so heavily on the video driver), please answer these questions:
What is the make and model of your video card/chip?
Do you have a laptop, or desktop?
What is the installed version of the video driver?
Is that the latest from the nVidia, or AMD/ATI Web site? Do not trust your OS to tell if you have the latest.
For more detail, see this article: http://forums.adobe.com/thread/948651?tstart=0
Good luck,
Hunt

Needing help with Adobe Premiere Pro

Yes, I know it is ancient but I still use it. I use it for my school's daily news broadcast. We capture our students as if they are presenting a live news program and then assemble in the timeline. We use a miniDV camcorder and firewire. Once we have all of the elements in the timeline, we then are able to play the timeline via the firewire (hooked to the camcorder) through the play/edit mode through a VCR out via coaxial cable to all of the classrooms in our school.
My current problem is that I encountered an error while creating a movie. I have a preset that saves versions every 3 minutes. I tried opening each of them but it just keeps saying it's loading but that is it...nothing ever comes on the screen. I moved a title slide (in a folder outside of the project folder destination) right before I had decided to make the movie. I did get one version to open---finally but thought...well, let's try a later one...so I don't have to "recreate" everything I had just done....then none of them would open...not even the one I got open.
Also, if anyone has any suggestions on a different way to do what I am doing using newer technology...please share.
Finally, is there updates that maybe I need to download or something to continue to be able to use Premiere Pro???
Please share any and all suggestions...desperate in Missouri

John,
Take a trip in the WABAC Machine.
Now, I could be wrong, but when the OP said "Yes, I know it is ancient but I still use it." I assume they meant the original version. The one without a number. The one some people called Premiere Pro 7, or Premiere 7. Or whatever. The one right after Premiere 6.
I remember having to go through the numbering explanation in my tutorials on Premiere Pro 1.5 since confusion reigned. You can still watch the introductory video and get my explanation starting around the 40 second mark.
But, as I said, I could have it wrong. They might have a different version.

NEED HELP Problem PLEASE READ!!!!

*All I did was download this album because I wanna go for a run and wanted to quick throw these songs on I downloaded well they came in M4A files so I tried puting them on my ipod 2nd gen nano using Copy Trans Manger thats my ipod manager. They didn't show up so I downloaded a converter and converted all them to mp3 files now I put them on my Manager which is on my ipod.. and they acted as if they were M4A files and didn't show up.. But i converted them to regular mp3 files they shouldv'e shown up what is the problem did it not let me replace the mp3 files with the m4a already on it could that be the problem? Help please iwanna go for a run and I want these mp3's to show up on my ipod... I forgot to say it would of said do you want to replace these files so Idk if thats what happened or not*
Please help me i wanna go for a run and fix this problem
Message was edited by: DarkLegacy24
Message was edited by: DarkLegacy24

You need to be more specific as to what your problem is, that is why no one has responded.
Tell us step by step what you are trying to do, and then people like me can help you.

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Need Help: Problem with iTunes 8 and artwork.....

This is a weird issue. I'm trying to add album artwork for imported albums manually in itunes that it can't find or has incorrect. Every time I try (no matter which method) the artwork either doesn't take, iTunes freezes, or the album in question skips the first track until I delete the entire album and re-import. Any suggestions? I'm running 10.5.6. Any help would greatly appreciated

Hi,
Hope I can help. I had a similar problem. I could not update any information about the tracks album etc. I had checked permissions everything... finally I decided to go to ID3Tags and selected none and then the edits took. Strange don't know why, but in my case it has worked a number of times.
Hans

Need Help - Problem while having a panelformLayout inside a Region.

I have a jspx page which has some regions out of which one region has a panel form layout in it's corresponding jsff.
Below is my jspx
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:pe="http://xmlns.oracle.com/adf/pageeditor"
xmlns:cust="http://xmlns.oracle.com/adf/faces/customizable">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:pageTemplate viewId="/sdk/core/uifwk/template/templateDef.jspx"
value="#{bindings.pageTemplateBinding}" id="emT">
<f:facet name="emContent">
<af:panelStretchLayout id="psl1" topHeight="auto">

<f:facet name="center">
<pe:pageCustomizable id="pageCustomizable1"
toolbarLayout="message stretch addonpanels button">
<af:panelStretchLayout startWidth="40%" endWidth="60%"
id="ps12">
<f:facet name="start">
<af:panelGroupLayout layout="scroll" id="pgl1">
<cust:panelCustomizable id="panelCustomizable1" showEditAction="false">

<cust:showDetailFrame id="sdf1" text="General">
<af:region value="#{bindings.General1.regionModel}"
id="r1"/>
</cust:showDetailFrame>
<cust:showDetailFrame id="sdf2" text="Features">
<af:region value="#{bindings.Features1.regionModel}"
id="r2"/>
</cust:showDetailFrame>
</cust:panelCustomizable>
</af:panelGroupLayout>
</f:facet>
<f:facet name="end">
<af:panelGroupLayout layout="scroll" id="pgl2">
<cust:panelCustomizable id="panelCustomizable2" showEditAction="false">

<cust:showDetailFrame id="sdf4" text="Performance">
<af:region value="#{bindings.Performance1.regionModel}"
id="r4"/>
</cust:showDetailFrame>
</cust:panelCustomizable>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</pe:pageCustomizable>
</f:facet>
</af:panelStretchLayout>
</f:facet>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>
Below is my jsff
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">

<af:panelFormLayout id="pfl1">
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayDomain}"
id="plam2" label="Domain" for="aot2">
<af:activeOutputText value="#{pageFlowScope.PsGeneral.DOMAIN}" id="aot2"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayDbName}"
id="plam3" label="Database Name" for="aot3">
<af:activeOutputText value="#{pageFlowScope.PsGeneral.dbName}" id="aot3"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayDbType}"
id="plam4" label="Database Type" for="aot4">
<af:activeOutputText value="#{pageFlowScope.PsGeneral.dbType}" id="aot4"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayPsHome}"
id="plam5" label="PS_HOME" for="aot5">
<af:activeOutputText value="#{pageFlowScope.PsGeneral.PSHOME}" id="aot5"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayPsCfgHome}"
id="plam6" label="PS_CFG_HOME" for="aot6">
<af:activeOutputText value="#{pageFlowScope.PsGeneral.PSCFGHOME}"
id="aot6"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage rendered="#{pageFlowScope.PsGeneral.isDisplayAppDb}"
id="plam7" label="PS Application Database"
for="gl1">
<af:goLink rendered="#{pageFlowScope.PsGeneral.isDisplayAppDb}"
destination="#{pageFlowScope.PsGeneral.appDbURL}"
shortDesc="#{pageFlowScope.PsGeneral.appDbToolTip}"
text="#{pageFlowScope.PsGeneral.appDbName}" id="gl1"/>
</af:panelLabelAndMessage>
Like this there are 23 Panel Label and Message components .
<af:panelLabelAndMessage id="plam23" label="Host" for="gl3">
<af:goLink destination="#{pageFlowScope.PsGeneral.hostURL}"
text="#{pageFlowScope.PsGeneral.hostName}" id="gl3"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</jsp:root>
When the page is rendered in the browser only the first 5 panelLabelAndMessage elements are rendered and the page is broken after that. There is no problem in the code behind, in whatever order you place the pLAM elements the first five rows are rendered and the page is broken with the following log
Caused by: java.lang.IndexOutOfBoundsException: Index: 5, Size: 5
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1425)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1410)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:352)
at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:187)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1431)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
If i remove the "panelFormLayout" from the jsff and try, all the elements are appearing but without the alignment. So clearly the problem is in 'panelFormLayout'.
Is there anything wrong in the jspx violationg the layout rules. Can someone help me in resolving this issue?
Regards,
Balakrishnan

Thanks Timo for the reply.
JDev Version : JDev 11.1.1.6
Yes this is a Webcenter page.
I don't understand what is that plain ADF. Because in all the pages we build, we use these kind of tags. I have used the same panelFormLayout in the jspx and it work's fine for any number of rows. Only when used inside the region the problem occured.
Regards,
Balakrishnan

NEED HELP: Problem with Canvas Size in Crystal design/report.

Hello,
I am having some trouble with one of my reports, the canvas size is so much bigger than my design/report, which is causing it to preview really small. I have gone into the document properties and tried to change those settings, I have also used the tools to try to make the canvas size smaller, it seems as thought nothing is really working. When I use those tools it cuts off part of my report and also adds huge scroll bars into my design... Does anyone have any insight on this? It would be a great help.
Thank you,
Kerry Jenkins
Harte-Hanks Analyst

Hi Kerry,
Are you using Crystal Reports Designer or BusinessObjects designer ( what ever it was called ) Crysstal Reports 5 was released in the summer of 1997 and definitely did not support a flash file.
Need more info and details on the versions you are using and info on the Clients portal, Is it Businessobjects Enterprise 5.1?
Thank you
Don

Need Help - Problem: Cannot rename the file

I hv three type of file, which is original file, processed file and edited file. Then, my goal is change all the three type of filename after i edit and save the document...
My problem is sometime it can be changed, but sometime it just change either one or two type of filename only.....
Can somebody to help me........10s first....
Below is my coding.....
String nfilename = tokenString[0] + "_edited";
File original = new File(directoryname + "\\" + "original" + "\\" + tokenString[0] + ".txt");
File noriginal = new File (directoryname + "\\" + "original" + "\\" + nfilename + ".txt");
boolean success1 = original.renameTo(noriginal);
File process = new File(directoryname + "\\" + "process" + "\\" + tokenString[0] + ".xml");
File nprocess = new File (directoryname + "\\" + "process" + "\\" + nfilename + ".xml");
boolean success2 = process.renameTo(nprocess);
File edit = new File(directoryname + "\\" + "edit" + "\\" + tokenString[0] + ".xml");
File nedit = new File(directoryname + "\\" + "edit" + "\\" + nfilename + ".xml");
boolean success3 = edit.renameTo(nedit);

I have some problem when I rename file that have filename in thai language.
I think may be it's depend on locale, I changed locale to TH but it's not work yet.
some body help me

Need Help On Adobe Premiere elements 12

I have made a recording on my DVR and captured it onto my laptop with the Hauppauge capture device without a problem I have edited it with the Premiere elements but upon reviewing it it looks a little more pixilated than the original.
What are the correct settings to finalize it without it seeming so pixilated Im looking to save it to a external hard drive Thanks

YouTube won't allow you to upload a video that long directly from Premiere Elements.
If you've got a modified YouTube account that allows longer videos, you can do so by manually uploading a video you output using Publish & Share/Computer/AVCHD with the YouTube HD preset.

Need help with saving Premiere files to work with any update

Hey everybody,
I've been editing with Premiere for a while now and I haven't really had too many issues until now. I live on campus at school and they just opened up a new Library with extensive Mac Pro editing stations, some with 4K monitors! The problem is that the school is not updating the software. So I am running the latest version on my Macbook Pro, but when I try and open the files on the library computers, it tells me something like, "Cannot open file because file was saved on a newer version." Now I know it seems obvious that I should just stick to my computer, but it's nice having a much faster editing station with 27"+ screens. Because the library is so new, they are having trouble keeping up with all the updates and they don't seem to plan on updating them except every semester. So, are there any workarounds? Can I save my files as a more multi-platform file?

I would take your computer back to the earlier version the college uses, there are workarounds to go back versions but they are not perfect.

Need Help: Problem with JSP setProperty to Bean

Hi,
This is my first time posting to this forum so I am not completely aware how Duke dollars work but if anybody can help me I will be happy to give some... whats normal for solving a problem?? 10??
Anyway... the problem...
I have a simple JSP with a simple HTML <form> that has a text field and a Submit button. Submit takes the user to the next JSP page however the setter method for property 'user' is never called. I can verify this through an attached debugger.
I am using Tomcat 5.5, and I never had a problem like this in previous versions of Tomcat.
I have tried changing the scope of the bean to request however nothing changed. I excluded all my business logic and tested this one more time just to make sure I wasn't inadvertadely screwing with something however this still does not work.
I am sure I am missing something small but for the life of me I can't figure out what.
Here is my code:
index.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
 "http://www.w3.org/TR/html4/loose.dtd">
<html>
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
 <title>JSP Page</title>
 </head>
 <body>
 <jsp:useBean id="something" scope="session" class="com.db.servlet.UserBean">
 <jsp:setProperty name="something" property="*"/>
 </jsp:useBean>
 Select
 <form id="Form1" method="post" action="multi.jsp">
 User: 
 <input type="text" name="user" size="20"> 
 <input type="submit" value="Submit">
 </form>
 Or select Single mode. 
 <a href="tris.html">tris</a>
 </body>
</html>UserBean:
package com.db.servlet;
public class UserBean {
 private String user = null;
 public UserBean() {
 public void setUser(String user) {
 this.user = user;
 public String getUser() {
 return user;
}

Oops!
I not only realized my mistake, I also accidentally posted this in the wrong forum. I meant to post in the JSP Forum.
For reference, what I did wrong was I placed my setProperty tag in index.jsp rather than placing it in multi.jsp (the file specified in the form action).
Everything works now.

Need HELP- Problems withmy MuVo TX FM 25

RE>I have problems with my MuVo TX FM 256MB. </PRE>RE>On one occasion, I opened the excel file from the USB flash dri've and closed the file. </PRE>RE>But after that, I was unable to reopen the excel file. Hence, I decided to put back to its port. </PRE>RE>But it seem to be malfunctioning and stated ?file system error? in USB port.Left with no choice, I tried to replug </PRE>RE>the flash USB dri've into the computer and the computer screen prompted me to format the disk in </PRE>RE>Toshiba Satellite 240 laptop. I did according to what the screen prompted me to do and format it in FAT in </PRE>RE>Window XP Professional. However, it is unable to resolve the problem. </PRE>RE> </PRE>RE>I have tried downloading the MuVo TX FM Firmware Upgrade .8.02 (.58 MB). However, there?s no </PRE>RE>pop-up stating that the computer can detect the new hardware.</PRE>RE>Next, I downloaded the driver- MStorage_PCDRV_LB__07_00_250.exe (MUVO-WBDRV-3-LB) and tried again,</PRE>RE>yet it still didn't work.</PRE>RE> </PRE>RE>So, for now, I can just able to use the MuVO TX-FM as a thumb dri've to save and open file, but the </PRE>RE>?file system error? remains whenever I on the USB flash dri'ves when in the port now. Can anyone </PRE>RE>please help me? :smileyindifferent: Your help is greatly appreciated. </PRE>

Thanks for your reply. I have already solved my problems. For those who experience similar problem, DO NOT DOWNLOAD THE LATEST VERSION. Please download the earlier version of the firmware. Please read the link for more information. http://forums.creative.com/creativel...id=2922#M94590

I need help with adobe premiere elements 12

I just bought premiere elements 12 and i tried to upload a video to youtube and it was longer than 15 minutes and it said it was to long to upload to youtube. I have uploaded a 22 minute video before how can i upload a longer video thanks.

YouTube won't allow you to upload a video that long directly from Premiere Elements.
If you've got a modified YouTube account that allows longer videos, you can do so by manually uploading a video you output using Publish & Share/Computer/AVCHD with the YouTube HD preset.

I need help: 2 problems on Premiere CS 5.5

Similar Messages

Maybe you are looking for