I need help ASAP, I can't access my router

I have a WGR614v7 . When I try to access it through 192.168.1.1, all I get is white screen that says "(192.168.1.2) is managing this device". When I try to put that into my browser, all it gives me is a "page cannot be displayed" error. Please help me ASAP, I really need to get in there and foward some ports.
Message Edited by DaneClark on 09-09-2008 05:48 PM

Check the IP address on the computer connected to the router also checked for default gate way address. and use the default gatewar address to access the UI

Similar Messages

Need help asap. Can't open project in PP CS6 Debug Event, Need help asap. Can't open project in PP CS6 Debug Event

I sat up all night, last night, editing a movie for a school project which is due Friday. I am extremely busy, and as i opened the file this morning to show the progress to a partner, Premiere, told me "Premiere pro has encountered an error" - "[c:\Mightykilt64\shared\adobe\mediacore\mediafoundation\api\inc\keyfra" - I click continue, and it says "The project could not be loaded, it may be damaged or contain outdated elements"
I am so frustrated as i'm super busy, and on top of that i'm no computer genious, i really really hope someone can help, i need it asap! I use windows 8 btw..

Gaps can be very small, and almost impossible to actually see.
First, I zoom in on the Timeline, to the Frame-level, and step through the Timeline, or play it, looking for a flash of black.
Next, I will hit Home, to get to the beginning of the Timeline, and then use the PageUP/PageDN keys to step through, Clip by Clip. I watch the CTI (Current Time Indicator w/ the red Edit Line) carefully. It should smoothly jump from Clip to Clip. With a tiny gap, say 1 Frame, the CTI will "hiccup," or "bounce." That is where the Gap is. How one fixes it will depend on where the gap is, and what one wants. Say that it's between two stills, I would then drag the Head of one, or the Tail of the other, to fill that gap. If it's between Video Clips, other choices might work best.
PrE has a "Close Gaps" function, but if one has Audio that covers that gap, it will not work.
One trick, that can get you to Transcoding is to add Transparent Video. Drag that to Video Track above all of your existing Video Clips, and extend it to "cover" the entire Timeline. The limitation of this method is that if there is a gap, there will be a black flash in the Video. If only 1 Frame, that might go undetected.
Usually, when one gets the ":Failure to Return Frame," there is a % of the Timeline, also listed. One can do the math to locate that on the Timeline. As PrE does a two-pass Transcode, then 100% of the Transcode is through two passes. The full Duration of the Timeline is at 50%, as that is the end of the first pass. That can be a bit confusing, as a glitch at 75% would mean that half-way through the second pass, there was an issue detected. Usually, if there is a glitch, it will be discovered in the first pass.
Good luck,
Hunt

Need help!! Can't access Photoshop files

I uploaded a number of PS files from a wedding I shot. I only get loading wheels in the folder view for the file previews and when I select a file the page never fully loads.

Thank you for the additional information you provided. It was quite helpful in investigating the problem. After working with various properties in my PSD file in Photoshop I am now able to reproduce the behavior you're seeing with a PSD having multiple layers and, in my particular repro case, a file greater than 250 MB in size.
Here's some additional information that I found during my exploration. I had better success with uploading a single file at a time rather than a selection of multiple files to upload at once. Also, I was not readily able to reproduce the issue if I had Maximum Compatability set to ON (Photoshop / Peferences / File Handling) for the file.
I have reported the issue internally to our developers and they are investigating further.
We appreciate your bringing this issue to Adobe's attention!

Need help ASAP! Can't print all pages to PDF!

I'm trying to print to PDF a 44-page document for client proofing in Indesign CS4. When selecting the print range I always click "All", and "Spreads".
Last week out of the blue it only printed to page 16, with the above settings. I don't have any sections or page numbers or anything that would cause it to not print certain pages.
There are no errors when it's generating the PDF, in fact it goes through the entire print dialogue box just fine; except the "finished" PDF will pop up early with only 16 of the pages, while the print dialogue box is still going. I have to go back afterwards and print range "17-44" to get it to print the rest, and even then it will only print to page 41, and I'll have to go again and print "42-44", so I end up with 3 documents.
It does it with multiple documents. It seems to be random, too, as today I was able to get it to print out a different document in it's entirety as I wasn't able to earlier.
What on earth could be going on? I haven't changed any settings since the problem appeared. Thanks for your help.

I think if there was a problem in the driver it would be obvious. You might want to try trashing the prefs before doing anything more drastic. See Replace Your Preferences
There are some scripts for doing imposition, but Print Booklet is the built-in choice. That said, unless your printer specifiacally told you to make spreads, or you are the printer yourself, DON'T DO IT. It is the printer's job to impose your file to fit his equipment and you'll just make more work for everyone, or even make your job impossible to print, if you try to do his job for him.

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

Hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

Go here.
Good luck,
Clinton

IPad deactivated. Need help asap!!!

My daughter deactivated my husband's iPad. The screen says that it's deactivated and that I need to connect it to iTunes. The problem is, that it's connected and a little box appears saying "To allow access, please respond on your iPad...". How am I going to respond if its not working?! Need help asap!!!!

Is that the computer that it's normally synced to ? With iOS 7 you need to need 'trust' computer that it's connected to, if the iPad is disabled you won't be able to trust it, you will need to put the iPad into recovery mode in order to be able to reset the iPad - there are instructions towards the bottom of this page : http://support.apple.com/kb/HT1212 . You can then restore/resync the content to it.

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

My ipod says i have no music on it, but when i plug it into itunes, and look under music on my ipod, its all there. NEED HELP ASAP!!!!! all the music came from a computer which i no longer have, so my ipod is the only place where that music is.

This morning, i downloaded about 16 songs to put on my ipod, and i manually dragged them over to my ipod to sync that way (like i always do because the music on my ipod came from a different computer which I no longer have) and on my way to work, i realized my ipod says "no content" under Music. However, when I plug my ipod into itunes and click on the music tab under my ipod name, all of my music is there. What happened and how do i get that music back on my ipod? I need help asap.

You had a glitch and the music files got corrupted. I know of no way to uncorrupt them.
You can try using a computer app like iFunbox
http://dl.i-funbox.com/
to see if yo can get them from the iPod in a usable file.
Otherwise you will have to re import them to your computer and sync
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My pages document wont open NEED HELP ASAP

when I go to open a pages document on my mac book pro, the document I'm trying to open is pale and i can't open it. I NEED HELP ASAP.

How did you install Pages & what version? What model of Mac are you using & what version of OS X?
The answers to those questions will help anyone trying to answer.

Objects outside of workspace show in SWF... Need help ASAP!

When I export a flash movie (.swf file)And play it on full screen, the objects that are outside of the workspace show. Can anyone tell me how to fish this problem? need help ASAP! Thanks :]

If what follows isn't sufficient for you to figure out, you'll have to spend some time learning how to work with Flash. While you'll often get help solving problems in these forums, it's less likely you will get tutoring services. Google is a very good resource for tutorials.
To create a mask you draw a shape to the size you want and place it on a layer above all the content you want to mask. A mask is actually not well named because masks normally hide things, while in the graphics world, masks define the are where things are shown... so when you apply a mask to something, only what is under the mask shows. To finalize, you right click on the label area of the mask's layer and select Mask from the menu that appears. You may have to drag lower layers up towards the mask layer to get them included, whicxh is why I mentioned creating the rest of the content as a movieclip (a single layer object).
To control the visibility of objects you set their visibility to true or false (AS2: mcName._visible = true (or false), AS3:mcName.visible = true (or false)).
To create a frame around the stage, add a new layer atop everything and draw a rectangle big enough to hide all the content you don't want showing that is off the stage. Then draw a rectangle that is the same size as the stage on top of that first rectangle, placing it over the stage, and then deselect anything that is selected. Then reselect the smaller rectangle you just drew and delete it. The larger rectangle is now framing your stage.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

How do you overlap PDF's and finish with one PDF file? Need help ASAP

how do you overlap PDF's and finish with one PDF file?
Need help ASAP

I'm not sure if you can do that with CreatePDF. Try it; you got one free use when you sign up with Acrobat.com
If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

I'm restoring my iPhone right now, need help ASAP

So I've had a corrupt file that's been taking up 7GB in my 'other' stuff on my iPhone 5 so I'm finally restoring it right now, but I'm guessing the backup data with have saved whatever that corrupt file is in it.
So 3 questions: • If I don't want to backup now but for some reason decide I want to in a say a day or so what would I do?
• Can I restore my phone from my iCloud backup, if so how?
• After restoring my iPhone will it create new backup data that will wipe over the already existing data with the corrupt file in it or what?
Thanks for any help/advice, I'm in the middle of doing this so need help asap if anyone can help.

1. make a backup any time you want.
2. Yes, if you have a iCloud backup
Settings > General > Reset > Erase All Content and Settings
3.Yes on computer it will replace the old backup. (I suggest you manually delete the backup first)
iTunes > Preferences... > Devices > select backup and click the Delete button.

I need help ASAP, I can't access my router

Similar Messages

Maybe you are looking for