I NEED HELP BAD

ok..i had a account on my laptop..but it got takein off..so i never pluged my ipod back in my laptop..well than i did..and i read the ipod name and stuff..but not the songs..i can only update it with new songs..,but how do i take whats on my ipod and put in my itunes??!
i have the same cd on my ipod 2 times it takes up 2 much room..so i want to take 1 off but with out takeing everything off u no what im saying??!

there are two ways to get the stuff from your ipod into itunes.
one is to enable ipod for disk use copy the music folder onto your desk tp and add the folder to the itunes library
the second way is to use a software called yamipod to get all your stuff from your ipod into itunes.
for more info on your problem go to the link below
http://discussions.apple.com/thread.jspa?threadID=765937&tstart=15

Similar Messages

Adobe reader not working. Needs help badly!!

I get this error message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
do I fix this. Not happy!!
My error messge I get. I need help badly to fox this !!
Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Can anybody Please help me !!!!!!!!!!!!!!!!!!!!!!!!!!
Michael Ladd and email is [removed]

Adobe Reader cannot open ZIP files. It only opens PDF files.

I need help badly with my ibook and palm pilot

Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA

HT4009 Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Portege M900 cannot detect/read from DVD drive - Need help badly!

I have this problem with Portege M900. My laptop cannot read from the DVD drive.
Does any one has similar problem? Need help badly as I cannot play my game from the CD.

Test if the dvd drive is seated correctly in the compuer, I had a computer the dvd drive did not work until I removed one of the on back of the laptop (machine was a Toshiba different model) and then I was able to seat the dvd drive correctly.

Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

Hi watanabei,
Please see Countries where ExportPDF is available for purchase. - Adobe Community. It's necessary to have a credit card billing address in one of the countries listed in this document. If ExportPDF is unavailable to you, you may want to consider an Acrobat subscription, which would also allow you to convert PDF files to Word and other format. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

My ipad can't connect to itunes store.. need help badly :(

my ipad can't connect to itunes store.. need help badly :(

have you tried quiting the app, ie removing it from the multitasking bar also, and then retrying it? Failing that, flick the ipad into airplane mode for a minute, then flick it back, wait for your wifi to connect then try again.

Need help badly!! how can i use the front camera i...

guys, i need help with the front camera of my device
how can i enable the front camera of nokia N900 to shoot photos or videos,
this problem is really bugging me...
need help badly...

You can't.. it is terrible..
the only app that really uses it is mirror
Open this link on your phone to install mirror
http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

Need Help Badly on Shopping Cart Using JSP And Java Servlet

Hi All,
This is the 1st time i am trying to create a shopping cart using JSP and Servlet.
I have read through a few acticles but i still do not get the whole idea of how it works.
Please guide me as i need help very badly.
Thanks.
This is one of the jsp page which displays the category of products user would like to buy : Products.jsp
<html>
<head>
<title>Purchase Order</title>
</head>
<body topmargin="30">
<table border="0" width="100%" id="table1" cellpadding="2">
 <tr>
 <td bgcolor="#990000" width="96">
 
 Code</td>
 <td bgcolor="#990000" width="260">
 
 Description </td>
 <td bgcolor="#990000" width="130">
 Brand
 </td>
 <td bgcolor="#990000" width="146">
 UOM
 </td>
 <td bgcolor="#990000" width="57">
 Unit 
 Price </td>
 <td bgcolor="#990000" width="62">
 
 Carton 
 Price </td>
 <td bgcolor="#990000" width="36">
 
 Qty</td>
 <td bgcolor="#990000" width="65">
 Add 
 To Cart</td>
 </tr>
<tr>
<td align="center" width="96" bgcolor="#CCCCCC">
123
</td>
<td align="center" width="260" bgcolor="#CCCCCC">
Tom Yam
</td>
<td align="center" width="130" bgcolor="#CCCCCC">
Nissin
</td>
<td align="center" width="146" bgcolor="#CCCCCC">
12 x 10's
</td>
<td align="center" width="57" bgcolor="#CCCCCC">
$3.85
</td>
<td align="center" width="62" bgcolor="#CCCCCC">
$46.2
</td>
<td align="center" width="36" bgcolor="#CCCCCC">

<input type="Integer" name="Q10005" size="1">
</td>
<td align="center" width="65" bgcolor="#CCCCCC">
<input type="checkbox" name="checkbox" value="123">
</tr>
<tr>
</table>
<table border="0" width="100%" id="table2">
 <tr>
 <td>
 <div align="right">
 <input type="hidden" name="hAction" value="AddToCart"/>
 <input type=submit name="submit" value="Add To Cart"/>
</div>
</td>
 </tr>
</table>
</body>
</html>
After user has make his selection by entering the qty and ticking on the check box, he would click the "Add To Cart" button ... and this would call my servlet : AddToAddControlSerlvet.java
import javax.servlet.http.*;
import javax.servlet.*;
import java.io.*;
import java.util.*;
import java.util.ArrayList;
public class AddToCartControlServlet extends HttpServlet
 public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException,IOException
 String action = req.getParameter("hAction");
 if (action.equals("AddToCart"))
 addToCart(req,res);
 public void addToCart(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
 try
 String url = "";
 String[] addList = req.getParameterValues("checkbox");
 HttpSession sess = req.getSession(true);
 //String sessionID = sess.getId();
 DBClass dbClass = new DBClass();
 ArrayList cartList = new ArrayList();
 for (int i = 0; i < addList.length; i++)
 String productCode = (String)addList;
 int qty = Integer.parseInt(req.getParameter("Q"+productCode));
 Products product = dbClass.getProductDetail(productCode);
 double totalUnitAmt = qty * product.getUnitPrice();
 double totalCartonAmt = qty * product.getCartonPrice();
 Order order = new Order(product.getProductCode(),product.getProductDesc(),product.getBrandName(),product.getUom(),qty,product.getUnitPrice(),product.getCartonPrice(),totalUnitAmt,totalCartonAmt);
 cartList.add(order);
 sess.setAttribute("cartList", cartList);
 url = "/Cart/CartDetails.jsp";
 ServletContext sc = getServletContext();
 RequestDispatcher rd = sc.getRequestDispatcher(url);
 rd.forward(req, res);
 catch (Exception e)
 System.out.println(e);
From here, i would get the list of items which user has selected and add to the cartList, then i would direct the user to CartDetails.jsp which displayed the items user has selected.
From there, user would be able to remove or to continue shopping by selecting other category.
How i do store all the items user has selected ... everytime he would wan to view his cart ...
As i would be calling from jsp to servlet .. or jsp to servlet ... and i do not know how i should go about in creating the shopping cart.

Hi !
Yon can use a data structure as vector and store the items selected by the user into the vector . Keep the vector in session using session object , so the user can access the entire shopping cart from anywhere in the application .
Then , you can change the cart accordingly .
Hope this works.
Cheers ,
Pranav

IMAC NOT STARTING! I NEED HELP BADLY!

so one day i had left with my imac G5 on, maybe some programs open, and while i was away our power went out, so the imac was turned off without correctly powering down obviously, when i turned it back on it took forever and never even reached the screen where you sign into an account...
it stays on this blue screen forever and never starts up all the way. i tried putting the install disk in and it ignores it, it runs or atleast i can hear it trying to, but nothing happens. ive correctly turned it off, pushing the button until it shuts down, but ntohing works. i cant get on my mac! this *****! i need help and asap.
HELP ME PLEASE!
-Hayley
Message title was edited by: Host

So i have the back off now, and i see how that button works, i pressed it once with the power cord out, just messing around, so now i dont know what im suppose to do...
i put the power cord in and this green light shows up inside, but then i dont know how to power it up with the back off, while pressing that button, i dont even know, i need help!
please help!
lol
-Hayley

Another Infinite Login Loop Problem - need help badly

Hello. I need help.
When I start up my iMac (24 inch last generation model) I can't log into the OS. When I enter my password I see the default OS wallpaper (nothing else) then it kicks me to a blue screen then right back to the login. Same thing over and over. I've already ran disk utility off of the install CD to repair permissions, etc... but no luck. This even happens when I enter into safe mode. I'm running the latest version of the OS.
Can anyone help me?

Restore the bootable backup/clone or Time Machine backup. Without one, you have a difficult situation. First thing to try is boot with your install disc, run Disk Utility, and repair the disk.

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

Hi, I'm new. Need help bad!

Fixed myself.
Edited by: jpechart on Oct 17, 2009 7:16 PM

no body can help me,not with the way you are posting your questions, no. You first say you need help "urgently". If you've spent any time on these forums, you should know that the only thing "urgently" does is piss off many of the smarter programmers, greatly diminishing your chances of getting any help whatsoever. Your second problem is that you are expecting us to drop everything and help you, to put in tremendous and prompt effort, and yet you show no effort to help us. You don't use code tags, so we really can't read your code, you say a constructor "doesn't work" and yet you don't say how it doesn't work, how it's supposed to work, what error messages you've gotten,....
I mean come on here. If you want help from us, you have to put in some work on this post first. We are volunteers, and your job is to make our job of helping you as easily as possible. You've failed that. Please try again, and we'll see.

NEED HELP BADLY ON SOME FUNNY ERROR

"This installation package could not be opened. Verify that the package exits and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
I NEED HELP! I TRY TO INSTALL BUT CANT! what happen anyone noe? can anyone pls help me out with this problem? this is what happen when i try to open the file and install. it just cant open and it will show me that msg on top

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT1926?viewlocale=en_US

Need Help Badly Fast

i really need help this is first ipod its an ipod nano 2nd generation so i have no idea what im doin lol but my problem is when i open i tunes and try to go to my device it keeps on saying your regestration session timed-out i tried everything peoples please help

It is not an error. With Reader, the form has to have Reader Rights added to allow the save of the data. However, you should read section 15 of the EULA to be sure you are abiding by the limitations imposed on Reader Rights. The number of 500 uses shows up, but it depends on the form of use.

Site won't display in IE, need help BAD...

Heya,
My website
http://www.firetree.us is not
displaying at all in IE7 (possibly IE6 too) but unfortunately I
don't have a machine I can test it in. I'm really in need of some
help because it works perfectly in Safari, FF PC & Mac but IE
doesn't displaying anything at all. I really need some support on
this one, thanks guys.

> Thanks for pointing out the improperly closed script
attributes, I
> have
> been a little confused with when XHTML wants me to close
them like that
> versus
> />
Your usage is not XHTML vs HTML - it's just bad code.
<script> is always
paired with </script>. XHTML doesn't affect such tags.
It's only the self
closing tags that are affected by XHTML - <hr />,
 , etc.
> Unwise application of the onclick.... I know that's not
the way most
> people do it, but I don't understand why one would
include the <a> tag
> around
> the image element except to get the browser to turn the
mouse into a hand
> to
> signify it's a link... ?
That's why.
> don't ask why just an old habit I guess
Seems like a habit that is out of date to me!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Spencer Hill" <[email protected]> wrote in
message
news:[email protected]...
> Hey Murray,
> Thanks for your reply. Because this project isn't
complete I assumed
> anyone helping would know that's why I haven't put the
Doctype, encoding
> etc...
> That's usually the last thing I do (don't ask why just
an old habit I
> guess :p)
> Thanks for pointing out the improperly closed script
attributes, I
> have
> been a little confused with when XHTML wants me to close
them like that
> versus
> /> but I didn't think to run the site through the
validator til after your
> post. So thanks!
>
> Unwise application of the onclick.... I know that's not
the way most
> people do it, but I don't understand why one would
include the <a> tag
> around
> the image element except to get the browser to turn the
mouse into a hand
> to
> signify it's a link... ?
>
> I think it was the improperly closed script tags that
broke it in IE.
> That was the only thing I changed before it stopped
displaying in it.
>
> Thanks man!
>

I NEED HELP BAD

Similar Messages

Maybe you are looking for