I NEED HELP capturing HD on an External HD

OK, here's the deal.
I have already edited a 90 minute documentary on FCE and IMac G5 by down-converting from HD to DV on my external hard drive.(shot on a Sony FX-1 and using a Sony HVR-M15U deck for play back and down conversion) No Problems through out this process.
Having finished that project and having filled my hard drive I bought a new WD Pro edition hard drive, hooked it up via firewire (800 to 400 adapter cable for IMac G5)
When I try to capture HD footage it will act normally for about 10 minutes. The computer then still frames and locks up. The deck continues to play but nothing is being captured. The computer is completely locked up and the only thing left to power down and reboot, loosing anything I have captured. I have tried several different solutions but nothing works.
Any suggestions.

Tom:
Let me tell ya what I had to do to accomplish the daisy chain and you can tell me if I should proceed. Since my deck only has a 4 pin out, I daisy chained the deck to a WD Pro external hard drive which I had been using for SP video, then daisy chined that with the new WD studio edition hard drive, then to the IMac.
It still locked up the IMac after about 21 minutes of captured material. Do you think the two hard drives would make a difference. I doubt it. I need another cable to take it out of the mix but if you think that needs doing. . .
Most people would think 21 minutes is plenty but if something is supposed to do one thing and doesn't, it really irritates me. I could probably divide up the video tape into segments and capture it but the darn machinery is supposed to be better than that. Huh?
Thanks for all you help and suggestions.
Russ

Similar Messages

Need help on folders in thumbdrive, external harddisk become shortcut and original folder become hidden

hi
I would like to ask whether does Microsoft have a solution on this issue
need help on folders in thumbdrive, external harddisk become shortcut and original folder become hidden. and there will be a Recycler hidden folder, inside is a randomName.exe file(with a lady image as the program icon). Once the user click on the
shortcut of the folders, it will activate the .exe file and install onto Windows and with any pendrive, external harddisk plug to the infected machine all will be affected when plug to a clean machine and the cycle repeat itself.. by infect other
clean machine.
Please help as this is affecting my company of 400+ users! on window 7 pro x86 and x64
the problem is that we have a lot of pen drive, portable external harddisk using in the office..
thus is there 1 Microsoft patch to solve this issue once and for all... to prevent the autorun to activate?
Jaslena

the problem is that we have a lot of pen drive, portable external harddisk using in the office..
is there 1 Microsoft patch to solve this issue once and for all... to prevent the autorun to activate?
This is just because of infection is propagated.. As a result files are hidden.. attrib is great as it is suggested by S Guna . May be you can make a batch file or something like that? But there is a chance of reinfection if you don't clean your infected
systems as well as your pendrives..
Plug your infected flash drive and
Use one scanner at a time
Download hitman pro 3.7 (shareware and can be activated for 30 days free)and have a full system scan including your pendrive.. http://www.surfright.nl/en
And/or
use malwarebyte have a full system including your pendrivescan http://www.malwarebytes.org/products/malwarebytes_free/
And/or
Use Kaspersky Virus Removal Tool downloaded from uninfected pc and transfer to you pc and install and have a full system scan
http://www.kaspersky.com/antivirus-removal-tool?form=1
If everything fails, you can use offline bootable resccue cd and do a full system scan...
https://support.kaspersky.com/viruses/rescuedisk
http://windows.microsoft.com/en-us/windows/windows-defender-offline-faq
or hitman kickstart bootable pendrive
http://www.surfright.nl/en/kickstart
Then
(1)Check whether your files are hidden.. Most of the time files and folders are hidden as a result of pen drive malware infection..
It will change the attributes of the files/folders.
In that case u can use attrib command and
attrib -s -h -a -r
This is how it is used.. attrib method is common for windows
http://www.pcandtablet.com/windows-7-errors-and-crashes/191/i-cant-view-my-pendrive-contents-in-my-laptop-when-i-plug-pen-drive-and-open-it-it.html
(2)If data is deleted you can try recuva.. freeware to recover data.
http://www.pcandtablet.com/windows-8-1-software/1302/how-can-i-recover-shift-del-file-or-file-after-emptying-recycle-bin-in-windows-8-1-a.html
Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |

Need help with copying files onto external drive

I need help! Trying to copy downloaded movie files from Vuze (which have downloaded successfully) and copy onto external hard drive to view them but it wont let me copy over to the external device. Any ideas how to fix this please???

Can you explain the steps you used, and the error message (or symptom), that says the copy did not work?

Itunes wont open need help backing up music on external hard drive

My itunes wont open after upgraded to 8 , ive uninstalled and reinstalled itunes and quicktime and still wont work. i found a topic to possibly help me but i dont know how to tranfer my music to an external disk drive without being able to open itunes. i am getting so frustrated. please help

A usb hard drive that Windows sees doesn't need software for a simple back up.
Format the hard drive Disk Management, if it doesn't come already formatted, and then drag and drop the iTunes folder and whatever other data you want to back up to it.
What you're describing doesn't sound like something iTunes did. If you're having general install troubles you have another problem with your system and it's time for a little troubleshooting to find out what's really going on.

Need help with iMovie storage on external Hard drive

Is there any external HD that is fast enough to run iMovie? I just bought an 80gig ext. hard drive trying to solve that nasty memory problem that iMovie HD has... Well iMovie will not run because it's not fast enough, and the video clips play slow and choppy.. My question is does anyone know of a brand type or speed of ext. hd that is fast enough.. HELP!!! I need to finish this video pronto!
Thanks
ps.. the HD i bought was an iomega 80gig HD with usb 2 and 7200 rpm

Eric, for a few dollars/Euros more (..or whatever your currency is..) you could buy a FireWire enclosure ..that's just a box with a socket or two on the back. It's not a drive, but just a box to put the disc drive inside, and it's complete with FireWire connections.
Then unscrew the Iomega 80GB USB box, remove the 7200rpm 80GB disc drive, and insert it into the FireWire box, and connect up the multi-pin connector and power connector between the FW box and the hard drive. Connecting the drive is pretty simple. Look at "Mounting the drive into the bay", about halfway down this page.
Hey Presto! ..You've now got a working 80GB 7200rpm drive ..plenty fast enough for iMovie.. which can be connected to your iMac via FireWire!
Your disc drive is fast enough ..it's just your USB connection which is too slow; so just change the way that your drive is attached to the Mac, so that it uses FireWire.
Suitable boxes are this kind of thing.
It's simple: I have half a dozen assorted drives I've slotted into new bare-bones 'enclosures', and they all work fine by just plugging the enclosure (box) into a Mac FireWire port.
Quick 'n' simple, and cheap!
NOTE: Open up your Iomega box first, so that you can check what size of drive is inside, and thus what size of FireWire enclosure you need. A small 2.5" drive will certainly fit into a 5" enclosure, but a 5" drive obviously won't fit in a 2.5" enclosure! Though something like a WiebeTech DriveDock ..or the bigger and pricier ComboDock.. are open-ended, so they'll take any physical size of drive.

Need help on how to install external web cam on a macbook?????

Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.

Centaur3 wrote:
Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.
I can't advise on your Logitech webcam, but I am using [this webcam|http://www.bestbuy.com/site/Dynex%26%23174%3B-+1.3MPWebcam/8703094.p?id=1199495403693&skuId=8703094]. First used on a iMac G5, OSX 10.4, then later moved to a Mac Mini OSX 10.5 (and now OSX 10.6.2 on the Mini.) I got it not because it's the best webcam, but because it was one of the few that said it worked with OSX 10.4. (Other webcams I had needed 10.5.) I have tested it on my Macbook Pro (OSX 10.5 and upgraded to 10.6) and it works, but I don't normally use it there.

Need help capturing Video

Every time I try to capture video from my cancorder i receive this error message after a couple minutes.
"Premiere Elements has encountered an error.
[..\..\Src\PathUtils.cpp-178]
Can anyome help?

That was my first request. I'll try to be more detailed. I'm using a
Dell XPS 410 with two 500 gig internal hard drives and one external 500 gig
hard drive. Intel (R) Core (TM) 2 CPU, 6700 @ 2.66 GHz, 4.00 GB Ram & N
Vidia GeForce 7900 GS. I'm trying to download from a Sony Handicam Mini DV,
DCR-PC330 NTSC, using Premiere Elements, Version 9.00. During the middle of
capture, elements quits working and I get the error message " Premiere
Elements has encountered an error. ". Obviously
nothing is downloaded to the computer and the scenes are not split on the
timeline. Can anyone help?
In a message dated 5/31/2011 7:47:08 A.M. Eastern Daylight Time,
[email protected] writes:
Can you please elaborate more on the details of your camera? Is it DV,HDV
? What project settings are you using?

Need Help Configuring Membership Website with External Approval Process

I am working on configuring a membership website for a group of scientist. Here are the interesting requirements. Any brainstorming would be helpful.
1 - A prospective member applies online. Within the application the prospective member has to include a reference for previous work proving his qualifications and naming a reference to confirm the qualifications. The prospective member has to include the reference's name and email address. (Site visitor creats a new user-submitted webapp item, easy enough.)
2 - The application needs to kick off a workflow to an external site visitor (someone who doesn't have a site login). This reference needs to confirm of reject the prospective member's qualifications.
3 - If the external site visitor approves the reference, then the membership director needs to be emailed of the approval. This approval should then kickoff another approval process to ask the membership director for his approval.
4 - If the external site visitor rejects the reference, then the membership directory needs to be emailed the rejection notification. (If the reference rejects then there will be some sort of appeal process or ability to start over or submit a different reference.)
5 - If the reference approves and the membership director approves, then the prospective member is notified and submitted an invoice to pay. His memberhsip is not active until he pays.
6 - Once the member pays, then he appears in the online directory.
7 - The member will also be able to login and edit his profile as needed.
That about sums it up. Any ideas??
THANKS!

1. Do I need to connect the two base stations via an ethernet cable?
OR
Can I simply plug the second base station into a power outlet in any room, along with the external hard drive connected to it's USB port?
Airport Utility would not even recognize the second base station unless it is using an ethernet LAN-to-LAN connection. (It would not recognize the second base station with WAN-to-LAN connection.)
You basically have three choices here that will allow the second AEBSn to share the attached USB HDD:
Wired: Interconnect the two AEBSns by Ethernet; reconfigure both base stations into a roaming network.
Wireless: Configure both AEBSns for an extended network. Note: This is what Lowell Tuttman is referring to.
Wireless: Configure the second AEBSn as its own wireless network. This would work but would require network clients to switch network to access the drive or access the Internet. Not really practical and not recommended.
The following Apple Support link provides very detailed information on setting up either a roamng or extended network with multiple AirPorts.
2. Since I don't really care about the second base station utilizing the internet connection, do I set it up in Airport Utility as "create a new wireless network"?
This is the current setting and I have a steady green light. However, Time Machine does not recognize the disk.
In the first choice I provided, the second AEBSn would be configured to both "Wireless Mode = Create a wireless network" and "Connection Sharing = Off (Bridge Mode)."

Need help moving music collection from external hard drive to Macbook Pro

     I just bought a Macbook Pro today after my Windows desktop was bricked a few weeks ago. Luckily, I didn't lose the most important files on my pc, my music, because it was all on my Zune, as well. So, I borrowed an external hard drive, copied all of the music from my zune onto a friend's pc, and then copied it again from their pc to the external. Finally, I just plugged the external into my new mac, copied the folder within it holding my music, and hit "paste item" in the "Automatically Add to iTunes" folder. Initially, everything seemed to work perfectly, however, after transferring a little over 7 of my 54gb of music, an error message appeared saying that the operation was ending because it could not transfer all files.
     I then tried playing a file off of the hard drive, a wma, and received a prompt that the file was incompatible with Quicktime player, the default for no apparent reason. I tried then opening it with iTunes, and nothing happened, as far as I could see. Naturally, my next step was to google how one would transfer wma files to a mac, and, to make matters even more confusing, all of the results seemed to tell me that iTunes should automatically convert wma files to mp3, which does not seem to be happening in my case.
     I'm still not sure why this isn't working, as I'm sure more than 7gb of my music collection is non-wma, so that doesn't even seem to be the sole issue. Any help with importing my collection would be hugely appreciated, as I'm enjoying my mac so far, but will have to return it if I can't get music on here.
     Thanks.

One problem is that iTunes for Mac can't handle WMA files, iTunes for Windows will convert them, but not iTunes for Mac. When you add unprotected WMA files to your iTunes library (Windows only), iTunes converts them to new files that iTunes can play, based on your import settings. See if you can use your friend's PC to do this. If the borrowed PC has iTunes, create an alternate iTunes library so you don't mess up your friend's library. This explains how: http://support.apple.com/kb/HT1589
This support document might be helpful: iTunes: About the Add to Library, Import, and Convert functions, http://support.apple.com/kb/ht1347

Need help reinstalling Yosemite/Question about external hard drive

I have an early MacBook Pro and I have to reinstall Yosemite because I've been getting nothing but spinning beach balls, slow loading, lag in type showing up, and wi-fi issues. I took the laptop to the Genius Bar at the Apple store last week and they ran diagnostics on everything and all was perfectly OK. No hardware issues, no memory issue and he said my laptop was very clean. He saw the spinning beach ball many times while he was working on my laptop and suggested that I turn off File Vault as that could be causing the slowdown. He said if that didn't work (it didn't) to buy an external hard drive (which I received today) and to back up everything through Time Machine then reinstall Yosemite. I specifically bought an external HD that says "for Mac" and as soon as I connected it Time Machine opened and did the backup.
Now these are my questions. Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it? Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me? I know silly questions but I'm really worried about losing stuff.
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!

YoJoLo wrote:
Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it?
If you have taken the backup using the Time machine then there is nothing to worry as all your photos from iPhotos and Word for mac documents are backup safely by your time machine.
Only keep one thing in mind that the external HDD which you use for the time machine backup should have the capacity size of about 3-4 times that of your backup data size. Or else, the time machine external drive will start deleting the files if the external drive is about to be full.
YoJoLo wrote:
Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me?
You absolutely don’t have to reinstall the Word for mac if its install in the first place because Time machine will backup the system installed files of your MS Word which you had installed.
Word for mac is a one time install and you don’t have to call Microsoft for any authentication key after you have restored your Word backup files from the time machine drive. As I said before the time machine will backup your Word system installed files leaving you no chance to reinstall it again.
YoJoLo wrote:
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!
Here, Yosemite reinstall procedure......
Important: To reinstall OS X, you must be connected to the Internet. Make sure your power adapter is plugged in. Reinstall OS X using the built-in recovery disk.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command and R keys.
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
Important: Erasing the disk removes all the information from the disk. Be sure to back up the information you want to keep to an external device.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.
Hope this helps.....

Need help using music library on external hard drive

Here is my scenario. I am hoping some one can help me as I have been having a heck of time trying to figure this out. I am what you would call newbie to Mac(I just purchased macBook) so bear with me).
I have a iTunes library on an external hard drive that was created using Windows PC machine. I now would like to use the same library on my Mac. How can I get the Mac to connect to the iTunes Music on the external hard drive?
This is what I have done so far. I have been able to network the Mac with my current network so it does see the external hard drive.
BTW, I would like to achieve this without having iTunes open on Windows machine. I know about the sharing option in iTunes but I have discovered that it only works if I have iTunes open on the Windows machine. This may not always be the case so this is why i am hoping their is an alternative to get the mac to connect to the library on the external hard drive.
I look forward to help on this one.
...Bruce

Maybe I did not explain myself clearly. All I want to do is be able to listen to the music in my itunes library on external hard drive on my new MacBook. I am thinking all I will have to do is create the itunes database file on my Mac using the music in my library(on external HD).

Need help importing HD footage from external hard drive

I have an external hard drive with some footage from a friend. I cannot view the footage either in QT or through importing to FCP. I have version 4.5 of FCP HD. The audio works on the clips, but the video does not. Im guessing it might be a format issue, as the footage is HD footage shot at 24P. I've tried opening a separate timeline and changing the settings there, but that didnt seem to work. Any help would be greatly appreciated.

I'm guessing that the footage is HDV, and FCP 4.5 cannot work with HDV. That format came out over a year after FCP 4.5 was released. FCP 4.5 was dubbed FCP HD because it worked with DVCPRO HD footage natively. HDV support didn't hit FCP until 5.0.
You have options. Because HDV came out when FCP 4.5 was in use and didn't work with it, a couple companies made solutions to import this footage. www.lumierehd.com and www.hdvxdv.com.
BUT...that will get you the HDV footage at 29.97...60i. HDV 24p support didn't arrive until FCP 5.1.2. So you can try those solutions and see what happens, but most likely you'll have to upgrade to the latest version of FCP...6.0.2
Shane

Need help on connecting USB: 300GB external hard drive to wireless router

Hello,
I am trying to connect USB2.0 Maxtor 300GB external hard drive to my wireless router. Tried using Linksys new product NSLU2 which allows any USB cable external hard drive to NSLU2 device/network storage hub and then connect this NSLU2 directly to wireless router with the help of 10/100 Ethernet cable which allows to access external hard drive wirelessly.
Unfortunately Linksys NSLU2 is designed to supports USB external drives up to 250GB only.
Can any one advice me if there is any device I can use to connect my external hard drive to wireless router and access files without connecting/carrying USB external drive?
Any help is greatly appreciated.
Thanks in advance!
Arvind

Have a look at http://www.ximeta.com and their solutions. Especially
http://www.ximeta.com/web/products/ndenclosure1_en.php might be interesting, as you already have a HD.
Regards, Martin

Need help with pictures on an external HDD and windows labtop to Ipad3

Hallo everybody!
This week (I finally) bought an Ipad 3 and an Apple TV!
For the time being I still have a windows labtop and an external HDD full with photo's.
The ICloud software for windows has been installed because I would like to stream the pictures from this external HDD to my Ipad and then ofcourse on my flatscreen TV (via Apple TV). And ofcourse back, when I have taken a photo or a movie on the Ipad 3.
I would appreciate some help with the following questions:
do I have add all pictures from the HDD into a new map on the windows labtop. So that via Icloud the contain could become 'in the cloud'.
or do I have to add all the pictures from the HDD into the Itunes map on the windows labtop.
I have connected the Ipad to the windows labtop and via Itunes I have synchroniced a lot of pictures to the Ipad. I asume these are copies? And is it possible to remove them from the Ipad, because it will take a lot of memory (currently already 35 GB from the 64 GB).
Well I hope somebody could help me.
Many thanks in advance!
Ronald from the Netherland

I just found out that ICloud isen't really a storage place for photo's. Just a passing throw station to your other devices.

Need help capturing data via JavaPOS

I am new to JavaPOS. My requirement is to integrate our webapplication with a Hypercom optimum L4250. Users will use this device to enter sensitive numerical data like SSN, Phone number etc. The device is JavaPOS compatible. The idea is to run an applet to read the input from this device and fill the corresponding field on my webpage. I am not sure where to start. I have looked up javapos.com and couldn't find much help. Any one tried or implemented such requirement or can offer any direction?
Any help would be much appreciated.
Thanks
Sridhar

Thanks for you replies guys!
I need to use java because the ultimate reporting tool
is going to be a service developed in Jini.
The reason I believe the data seem to be wrapped
around after ftp transfer is because when I edited
(TSO FSE from MVS) all text data is aligned withing
the same column.
After data is transmitted via FTP (converted to ASCII
during trasmition) and edited with wordpad, text
characters do not seem to be on the same possition.
They are scattered all over the display area. Is
possible this could be a display affect from winword
but not sure.
The MVS job to FTP the file follows:
//STEP01 EXEC PGM=FTP,
// PARM='FTP.MIAMIDADE.GOV (EXIT'
//SYSPRINT DD SYSOUT=*
//OUTPUT DD SYSOUT=*
//SYSIN DD *
user-name/password
CD /storage
CD UAL
ASCII
PUT 'STORAGE.DCOLLECT.TYPV' 'DCOLLECT_TYPEV.TXT'
ls -l
close
quit
Words of advice appreciated
Ulises (arsi)
YES! 1st mistake ... don't use WordPad for this ... your NotePad, Dos, or some other pure text editor.

I NEED HELP capturing HD on an External HD

Similar Messages

Maybe you are looking for