I need HELP configuring SanOs 203 and syslog server Please!

I have a kiwi syslog server on a windows 2003 server to which i can not get my switches to send messages to it.
can someone please help.
I tried to configure from the cli and from the DUI without any luck.

You say it does not configure or that it does not send messages when it is configured? Can you port a show log info. I do not have Kiwi syslog on my network but do run 3CDaemon with no problems with SAN/OS 2.0.3
Is syslog server ping-able from switch?

Similar Messages

  • Need Help Configure SQLSERVER 2005 and Eclipse

    I just installed eclipse 3.4.1, sqljdbc_1.2.28, and server 2005, and sqlexplorer version 3.5. I am trying to configure them, and I am having a really hard time. I would really appreciate it if someone could help me out. I have installed sqlexplorer in the eclipse plugin folder, I placed the jdbc in program file folder.
    Here is what I have done so far:
    I start eclipse and click on window->show view ->connection
    Name :Gagouche
    Drive: jdbc odbc bridge
    url: jdbc:sqlserver://localhost:1433/test
    auto logon = check
    username = gagouche
    password = test01
    auto commit = check
    I see the following message “Could not connect to bitbit\gagouche. The exact message is please check the url. “
    bitbit is the name of my computer. When I login to sqlserver 2005, it usually looks like this bitbit\SQLSERVER\gagouche. Where gagouche is my username and enter my password and it works fine.

    Sorry, I meant to say that it is not working. It gives me the following error message now:
    Ping Failed!
    Details:
    com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
         at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
         at org.eclipse.datatools.connectivity.drivers.jdbc.JDBCConnection.createConnection(JDBCConnection.java:89)
         at org.eclipse.datatools.connectivity.DriverConnectionBase.internalCreateConnection(DriverConnectionBase.java:104)
         at org.eclipse.datatools.connectivity.DriverConnectionBase.open(DriverConnectionBase.java:53)
         at org.eclipse.datatools.enablement.msft.internal.sqlserver.connection.JDBCSQLServerConnectionFactory.createConnection(JDBCSQLServerConnectionFactory.java:27)
         at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(ConnectionFactoryProvider.java:83)
         at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(ConnectionProfile.java:355)
         at org.eclipse.datatools.connectivity.ui.PingJob.createTestConnection(PingJob.java:76)
         at org.eclipse.datatools.connectivity.ui.PingJob.run(PingJob.java:59)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Edited by: gagouche on Feb 9, 2009 8:08 PM

  • Need help configuring multiple VLANs and SSIDs

    Hi,
    We bought a Cisco SGE2000P 24Port switch and 10 WAP4410N access points. Our intent is to provide a secure network to our LAN, and a guest network to the Internet.
    We are thinking 3 VLANs would be best for this: VLAN 100 connected to the LAN, VLAN 1000 for the Internet Router and Filter, and VLAN 1100 for the Guest Wireless access.
    We have the switch configured for all three of these, and 1 initial access point configured for the VLANS, too.
    We have not yet moved the current Internet connection to VLAN 1000 because we aren't sure how to setup routing between VLANS.
    Here are some specifics on how the traffic needs to route:
    1. We have the DHCP server, which is the PDC, handling both scopes for the LAN and Guest VLAN.
    2. The web filter in VLAN 1100 needs to authenticate with the DHCP server as there are different filter rules based on authenticated user. Any users coming from VLAN 1100 will have a default filter rule without requiring any authentication.
    3. Certain traffic coming in from the Internet needs to be able to get to VLAN 100. The router has a built-in firewall that handles NAT and port forwarding, so as long as traffic can be forwarded to VLAN 100 we should be good.
    4. Traffic on VLAN 1100 (guest Wireless network) should only be allowed to go to Internet (VLAN 1000).
    Right now I have the VLANs configured and the ports assigned to the Access Points are set for TAGGED and on VLAN 100 and VLAN 1100.
    The SGE2000P has the following IP addresses assigned to the VLANS:
    10.7.3.252 - VLAN 100
    10.7.40.254 - VLAN 1000
    192.168.254.254 - VLAN 1100
    Has anyone been able to setup a similar configuration? We have scoured the Internet for documentation but it seems to be very difficult to find!
    Thank you!
    Gary Smith

    Based on your description of a 'Hybrid Port' this sounds like Cisco's 'Multi-VLAN Port' that was a feature of the 2900XL/3500XL series switches. This feature has however long since gone......
    With a Cisco switch an access port supporting an Access VLAN & a Voice VLAN is effectively a Trunk with only one Tagged VLAN and the Native VLAN:
    interface FastEthernet0/1
    switchport mode access
    switchport access vlan 10
    switchport voice vlan 100
    This results in the same configuration as:
    interface FastEthernet0/1
    switchport mode trunk
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 10
    switchport trunk allowed vlan 100
    With the exception of CDP packets being sent advertising the Voice VLAN.
    With regards to other IP Phone vendors and DHCP Vendor Options - the answer is it depends....
    Nortel use Vendor Option 144 to inform the IP Phone of the Voice VLAN and Option 128 for the Server (PBX) to use. Ericsson uses Vendor Option 43 that can be configured to tell the IP Phone the VLAN and the Web server to read the config file from.
    I don't think you will get this working automatically with your 3Com switches, you can however manually configure the VLAN on the Cisco IP Phones.
    HTH
    Andy

  • New user needs help with time machine and mac server.

    I am a new mac user and got a new mac mini running server.  I have time machine enabled on the server and a back up folder created.  My macbook will not see the server when trying to set up time machine from the macbook.  What am I missing?  Thanks.

    Unfortunately even though Apple had touted the AEBS USB2 HD use with TimeMachine (TM) they pulled it from the Leopard TM feature list about 1 week before releasing Leopard GNBuild 9A581.
    At this time Apple does not support use of the AEBS USB HD for use TM.
    I strongly suspect we will see this feature return in one of the next two updates Apple releases for Leopard.
    In the meantime be patient and I don't recommend you use a hack to circumvent the current TM limitation.

  • I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

    I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
    Can you help? thank

    revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • I need help importing navigation bars and rollover buttons from fireworks?

    I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
    Thanks

    In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons. 
    #1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing.  After 2-3 times of this, it gets old in a hurry.
    #2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
    #3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
    That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
    Nancy O.

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • HT4199 I need help with getting my printer to print, PLEASE.

    I need help with getting my printer to print, Please.

    What have you done so far?
    I suggest you connect it via a usb  cable first.  Once you get the printer working, move to wifi.  You will have to use an existing printer usb cable or purchase a cable.  Be sure to get the correct cable.  Ask for help.
    The warrenty indicates there is phone support.  Give HP a call.
    Warranty
    One-year limited hardware warranty; 24-hour, 7 days a week phone support
    Robert

  • MOVED: need help with my k7n2 delta series motherboard please

    This topic has been moved to AMD SocketA based board.
    need help with my k7n2 delta series motherboard please

    "...the other memory ive been using is  memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.

  • I need help configuring three products: WRVS4400N, WAG325N and WVC200

    Hello,
    I want your help in three linksys products as mentioned below:
    WAG325N ADSL2+ Router
    WVC200 PTZ CAMERA
    WRVS4400N VPN Router
    The computer connections and configuration of above linksys products which I am working with and which are connected with the above three linksys products at present are as follows:
    1) I have one server and one laptop.
    2) Laptop has two wireless adapters which I use to connect to the routers.
    3) The server is connected to the WRVS4400N Router through one of the four ethernet ports mentioned on backside of the WRVS4400N Router. The DHCP of this router is disabled by me and the router's default IP 192.168.1.1 was changed to 192.168.1.12
    4) The WRVS4400N router is connected to the Wag325N router for internet access to the server and server is connected to WRVS4400N Router as mentioned in point number 3 above.
    5) The WAG325N router is setup as per the instructions mentioned that came with the CD of this router. The only change that I have modified is the router's default IP. I have changed the default IP of WAG325N from 192.168.1.1 to 192.168.1.13 and DHCP is enabled on this router.
    The help that I want is step by step as follows:
    1) I want to configure the both routers in such a way so that I can access them from anywhere across the world i.e. remotely using internet.
    2) I have WVC200 Camera which I setup according to instructions mentioned in the CD and also configured the DDNS service. But when the " RJ45 Cable is connected " to my WAG325N router and Camera, then only the camera works properly. What I want is that after the setup is completed, I want to remove the RJ45 Cable connected from my camera to router and use the camera wirelessly from any location within the range of my above mentioned WAG325N router. I need flexibility to use my camera without cable connections from any location and any rooms of my house. I also configured the port forwarding and DDNS properly. The only problem is that if I remove the Cable after the setup of camera is finished, then the camera access is not working on LAN or internet(through DDNS). Whereas the same works on LAN and internet using the DDNS service, when the cable is physically connected to the WAG325N router. Also I want one more thing additionally other then this. I want to use this camera wirelessly by configuring the port forwarding options on both routers at a same time(i.e. simultaneously at once on WRVS4400N and WAG325N).
    3) Now as two DHCP cannot work at a same time and as my routers are connected with each other, So I have disabled the DHCP on WRVS4400N. Here I need help so that DHCP can be enabled on both at a same time. Because if the DHCP is not enabled on WRVS4400N then I have to give IP to the server which is connected with server. If I enable the DHCP then there are two DHCP's at a same time on same network and thus problems occurs in internet access to the server. So, what should I do in such a way so that I do not have to give any IP to my server and set it to automatic.
    4) This question is just for my knowledge so that I can use the above mentioned linksys purchases upto full extent possible in future. I want to know what is VPN and how is it usefull? What is the difference between VPN and VPN tunnel? How can VPN be used to access all my network resources connected with my server  in the above situation where my server is connected to WRVS4400N which in turn is connected to WAG325N?
    Thanks !
    Sincerely
    Kalpesh Sharma
    +91-79-25351208
    +919227435453
    Ahmedabad, India.

    for question number 1:
    you said that your main router is WAG325N, for you to remotely access the 2nd router is for you to forward the IP addr [192.168.1.12] on your first router and change its management port of your second router that is located on either the security tab or the administration tab on its User Interface
    to access your first router open and Internet Explorer and enter
    http://[public IP addr]:[management port]
    the PUBLIC IP or INTERNET IP is located on the status page of your router
    to access your second router just change the management port to
    ex.
    http://66.77.88.99:8080 first router
    http://66.77.88.99:8081 second router
    for question number 2:
    make sure that you have configured all wireless settings on both your camera and your main router WAG235N, once done save settings and power down your camera and power it back up.
    for question number 3:
    for you to enable DHCP on both routers your connection can go like so...
    from a regular port of your main router going to the INTERNET port of your second router [this way you can enable DHCP on both routers]. INTERNET is no problem, your cesond router will be able to get connection
    for question number 4:
    VPN - Virtual Private Network
    VPN tunnel -is/are connections from router to router [gateway to gateway]
    VPN is used to connect a diff network on a diff location for you to have access to the shared filed [it is like a file sharing through the internet]
    for you to be able to use VPN tunnel you have to connect to a different VPN router on a diff location. In that way you can get access to the other network 

  • Need Help in Remote Manager and OIM Configuration

    Guys,
    I am using OIM9.1.01 with Exchange 2010 , currently i have installed my remote manager on Exchange server, and its working fine. Now client want to remove Remote Manager from exchange server , and to be get install on some other server.
    will it possible to install Remote Manager on some other server than OIM and Exchange , if yes , how do i proceed with that.
    Thanks.

    Thanks Nishith Sirji,
    I am confuse about one thing , how do remote manager will understand "which database server is he going to create mailbox"? because currently I am executing powershell on exechange system only ,so no problem. but when i will installl it on some other system, how do my RM will know , where to create Maiilbox (which machine).
    do i need to configure my exchange box details anywhr in Remote Manager?
    Thanks.

  • Need help configuring Excel Services

    I've configured both the Excel Serives and Secure Store Target applications and continually receive the following error message when trying to view the Simple Projects List sample report:
    An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
    Project Server - Simple Projects List
    The Server Logs show the following errors:
    Access Denied: Claims stored in the credentials did not match with the group claim for a group app.
    The Microsoft Secure Store Services application Secure Store Service failed to retrieve credentials.  The error returned was 'Access Denied.' ...
    Access is denied. (Fault Detail is equal to Microsoft.Office.SecureStoreService.Server.SecureStoreServiceFault)
    SSS has failed with the following exception: Access is denied.
    Unable to esablish a connection using credentials retrieved from SSS.  This could be because the Unattended Service Account is not configured or because the credentials retrieved from SSS are not valid. 
    I've repeated the steps to create these configurations a few times, and continue to get the same errors.  Any help would be appreciated!
    Thanks

    Hello,
    I need help setting up excel services.
    Excel service is already running on sharepoint server.
    I have one reporting file which is generated by DBA with database connection. i want to upload that file under document library and i want whenever user open it through document library, it gets updated through database connection 
    This is my first time, so pls guide me
    Reporting file has authentication set to --> None 
    Do i require any specific settings for authentication? like unattended account ? which username should i use
    Connection String -->
    Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=True;User ID=ExcelServices;Initial Catalog=SurveyData;Data Source=jdb1;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RSTKW7W-06709;Use Encryption for Data=False;Tag
    with column collation when possible=False
    http://../training/sptestsite/Medication_Audit_Report
    http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
    Trusted File Location - is this place do i need to upload that reporting file? 
    Trusted Data Connection Libraries - is this place do i need to save connection file .odc ?
    If i am not wrong, should i put
    Trusted File Location = http://../training/sptestsite/Medication_Audit_Report
    Trusted Data Connection Libraries = http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
    http://../training/sptestsite/Medication_Audit_Report -- Here only reporting file will be uploaded right?
    http://../training/sptestsite/Medication_Audit_Data_Connection_Library/ -- Here only database connection .odc file will be uploaded?
    what other settings are required. please correct me
    my email address - [email protected]
    Harsh

  • Need help connecting to 360 and pc with internet

    im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
    thanks in advance

    Hi....
             A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
                There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

Maybe you are looking for