I need HELP connecting a M-Audio FastTrack Pro USB with a Behringer 1202!!!

i need some assistance wireing up my personal studio. Im running on a Mac Pro Tower Logic 8. I have a M-Audio FastTrack Pro USB interface and want to hook up a Behringer 1202fx mixer. How exactly do i do the wiring for this???what settings do i need to change in system preferences or in Logic.????? PLEASE HELP ME!!!!!

It depends what you want to do, and what gear you are hooking up and what you want to do with it.
How you hook it up really depends on your needs, which you don't specify.

Similar Messages

  • Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

    Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
    Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

    Anybody wants to help me ?I wait your answer for my question...!
    Thanks

  • Need help - connecting Monitor and TV at same time with component video

    I have a mac mini, connected via DVI to a monitor - I bought a DVI splitter to connect the monitor to one port and the tv to the other via a DVI to Video adapter, using component video. When I plug in the DVI to Video adapter, the primary monitor loses its connection and I cannot seem to get the TV to recognize the signal - what am I doing wrong?

    In my case, the Barco Cine7 CRT projector I would like to connect the new Mini to accepts a pretty wide variety of analog component video formats, but I cannot find a listing of what the Mini supports. Presuming I use a DVI to VGA adapter and then a VGA to RGB cable, can the mini video card output any one of the following analog component formats:
    RGBs or RGsB - R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync)
    RGB with tri level sync - R, G and B with separate tri level sync or with tri level sync on green.
    Component video - R-Y, Y and B-Y with separate sync or with compositesync.
    Component video with tri level sync - R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.

  • Need help regarding 5.1 audio on sblive va

    dear users,
    i m tight on budget thats y cant afford the audigy series or any new hifi cards.. i need help in activating 5. audio on my sbli've value card though old but i always love it.. theres a feature li've surround and when i activate it my surround mixer shows fi've speakers and sound comes from 4 speakers i wonder how can i connect the 5th speaker.. 2ndly there r two analog outputs on the card which connects front two and rear two speakers theres another spdif output now is that to connect 5th speaker? also plz guide me about the spdif cable which will connect with sbli've value cards and how can i get its output from ? i m really amauter in this stuff plz guide and help me thanks
    regards
    muddassar

    Muddassar,
    The SB Li've Value is only a 4/4. speaker system card and that does not support a 5. speaker as you would not have the available jack for such connection.
    Jason

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

    Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • Need help connecting to my home Wireless Network

    I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
    I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

    This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • I need help connecting my iPhone and computer together.

    I need help connecting my iPhone to computer

    Howdy sprinklemk,
    Welcome to Apple Support Communities.
    Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
    To use iPhone with your computer, you need:
    An Internet connection for your computer (broadband is recommended)
    A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
       OS X version 10.6.8 or later
       Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
    Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
    Cheers,
    -Jason

  • Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

    Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c.  I need assistance on connecting these together so I can run a report.  I am not an IT person so if someone could dumb it down it would be great.
    Thanks,
    NBGHealth

    Hello,
    I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
    Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
    Let them know CR is ANSII 92 ODBC 3 compliant.
    Thank you
    Don

  • Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

    Hi all,
    I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
    Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
    I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
    All help would be appreciated, looks like I'm going back to 10.5.1 though.

    Hi !
    Still no answer from M-Audio but it seems that they are not in cause.
    I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
    I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
    Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
    As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
    But two questions still remain :
    Why one USB port of the MacBook and not the other one ?
    Why since 10.5.2 ?
    Steve, if you hear me ;o)
    'Hope they will react quickly !

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • NEED HELP! - Installing Camera raw presets from USB Stick

    NEED HELP! -installing Camera raw presets from USB Stick.
    I am attempting to install the Camera Raw Presets. 
    It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings... 
    When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles. 
    I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one. 
    I have latest version of CameraRaw installed and still no settings folder. 
    I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where. 
    I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS  10.7.3
    Do I need to reinstall Camera Raw and how do you do that?
    Will I then lose my presets that I made in CameraRaw?  
    Thanks for your help

    Here is a note from the ACR 7.1 beta release.  http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
    Perhaps this answers question.
    Frequently Asked Questions
    Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
    The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

  • Needs help to know the different versions of forms with their compatibility

    Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
    Kindly give the details or any suitable link for the same.
    please consider it as on urgent basis.
    regards,
    rajesh

    Rajesh,
    the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
    Frank

Maybe you are looking for