I need help converting existing logo to transparent?

I have a logo that want to put into a PowerPoint which uses colored backgrounds. The logo comes out in a white box.
How do I convert the logo to a "Transparent Logo" so that when it overprints the graphics blend in?
Suggestions please, I have Elements 8. The manual says go to the Blending Options panel of the the Layer Style dialog box and turn off the first check box, "Blend Interior Effects as a Group" and should do the trick. I cannot find or Elements is too basic?
Thanks if anyone can help.

If you will post the logo here, we can probably advise you how to get rid of the white background. If you save it as a JPEG file, it will retain a white background, as that format will not support transparency.
I do not know which file format you can import into PowerPoint. Probably someone will come along with that information
You refer to a manual ----which manual?

Similar Messages

Need help converting from 4.0 to 2011

hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi ‏73 KB
8673D.vi ‏30 KB
8970 FREQ.vi ‏26 KB

attached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi ‏13 KB
8970 FREQ.vi ‏11 KB
noise source.vi ‏24 KB

Need help converting a PDF to excel

Need help converting a PDF to excel, the icon to convert dissappeared suggestions?

Open the file in Acrobat, use File --> Save As... --> Microsoft Word.
Mylenium

I am a beginner at Final Cut Pro. Need help converting MPEG-2 to use.

I am a beginner at Final Cut Pro. I have mpeg-2 video footage that I am trying to import the footage into Final cut, but can't. I understand I need to convert the file format. I am unfamiliar with how to go about the converding file formats and the codec what is the best way to go about converting the file format so I can edit it on Final cut pro?

Where did the files originate? (How were they created?)
Some formats can be brought in with the help of plug-ins.
MPEG Streamclip can usually convert them to Quick Time.
Russ

I need help converting a PDF to a word file. I purchased Acrobat for this purpose?

I need help using this download. I purchased Acrobat because I need to convert a PDF file to a word file. Can you give me instruction on how to do this.
Thank you,

Open the file in Acrobat, use File --> Save As... --> Microsoft Word.
Mylenium

Need help converting quicktime movies into Flash files

I need to convert a QT, PhotoJPEG compressed, movie file into a .flv format. I have AE 6.5 Standard and it keeps quitting on exporting a SWV file which would could probably get me by with my client. But, again, it errors out saying something like a JPG is busy, or a file is busy.
I have FlipforMac,a purchased version. But I'm not sure if converting it into a .wmv and then a Flash file is the best route or is even possible.
Any suggestions or ideas of software that I could purchase??
~reicko

i don't think you have read up on the use of flash video
(FLV). there's nothing you need that you do
not already have (except maybe quicktime pro or some other
video editing program). the FLV exporter
comes FREE with flash 8. You should be able to open your
quicktime movie in QT PRO and export to FLV
format - then use any of the flash playback components for
FLV files - best bet is to read the help
docs on this subject and go to the devnet section of
adobe.com where there are several in-depth
articles about implementing flash video into your site.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
rhian wrote:
> Hi,
> Thanks for your reply. I am using Flash 8. I've been
looking into streaming
> and it's very expensive with quicktime movies, however
I've found a company
> that will stream flash movies much more cheaply which is
why I want to convert
> it to a flash movie.
>
> Sorry are you say that Quicktime Pro allows you convert
files into flash
> formats?
> Rhian
>

Need Help Converting Video

Hello - I have a couple of separate questions that I need help with. I know basic FCP. I have FCP7. I recently shot a wedding with 2 different cameras. Both are HiDef Cameras. 1 Camera is a Prosumer Camera where the files were taking off the camera and imported by Final Cut. The second is a new, home camcorder which saved the files into a hard drive in MPEG 4 format.
I need to marry the two. I can import the all the files (from both cameras) directly into the timeline. But the ones from the camcorder (the mpeg4s) seem to have that "hitchy" feel to them when I play them back. Also, both types of files (even the ones that were directly imported into Final Cut from the Prosumer Camera) have the "render" lines when they are in the timeline, so I constantly have to render which takes forever.
The files that were imported directly into FCP from the ProSumer camera were imported on a different computer with a different version of FCP, so when I drag them into my timeline it tells me that they were from a different version and asks me if I want to update for my version. If I click YES then it stretches the files from 16:9 to 4:3. If I say NO then it keeps the 16:9 aspect ratio, but adds yet another layer of render I need to do.
Normally I do simple, Standard Def edits where I import things into the timeline via FCP7 with firewire from a deck and edit directly from there, then firewire back to the deck. Simple - no rendering, etc. My questions are as follows:
1 - Do I need to reset my timeline settings because I am now working with HiDef? Or does FCP automatically know that it is HD and it doesnt matter how I drag it into the timeline?
2 - Do I need to convert the MPEG 4 files to quicktime format, or does it not make a difference
3 - When I export, what settings would I use to keep it in HiDef. I am only going to make DVDs with it.
4 - Is there a way to do it so that I do not have to render constantly while editing
5 - To view, I am firewiring out to a deck which is then going into a Standard Def monitor. Is that the reason the footage appears "hitchy"?
Any help is greatly appreciated. If you have any help, please drop me a note at [email protected]
Thanks

YOu need to learn how to use FCP. Sorry, no offense needed, and I know it sounds harsh. But from reading that I can tell you have no idea about how to properly import tapeless media into FCP...and don't know what formats FCP works with...nor know what formats the cameras record. This is all basic stuff you need to know before you edit. Editing isn't only creative, but lately highly technical as well...you need to know what your software is capable of doing, and how to get the footage into it properly.
You cannot do what you did...directly drag from the cameras into FCP. No...it needs to be imported, typically with LOG AND TRANSFER...and converted from the shooting format, which typically isn't natively editable in FCP (want native, use Adobe Premiere...). It needs to be converted to ProRes. And yes, the file sizes of ProRes are a LOT bigger than the camera originals. 4-5 times larger. That's how FCP works.
Here's a quick tutorial to get you started. But then I suggest getting to know the editing system better.
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1

Need Help Converting AVI Home Movies to Mpeg without audio and Video Delay.

I have lots of home movies of my new baby i want to take with me while in Navy training and need help. I have tried 7 movie conversion software programs and it have cost me a lot, but none of them work. Any suggestions please? I leave soon and would like to know as soon as possible please. Thank you so much
Converting AVI to MPEG on Windows XP OS

YOu need to learn how to use FCP. Sorry, no offense needed, and I know it sounds harsh. But from reading that I can tell you have no idea about how to properly import tapeless media into FCP...and don't know what formats FCP works with...nor know what formats the cameras record. This is all basic stuff you need to know before you edit. Editing isn't only creative, but lately highly technical as well...you need to know what your software is capable of doing, and how to get the footage into it properly.
You cannot do what you did...directly drag from the cameras into FCP. No...it needs to be imported, typically with LOG AND TRANSFER...and converted from the shooting format, which typically isn't natively editable in FCP (want native, use Adobe Premiere...). It needs to be converted to ProRes. And yes, the file sizes of ProRes are a LOT bigger than the camera originals. 4-5 times larger. That's how FCP works.
Here's a quick tutorial to get you started. But then I suggest getting to know the editing system better.
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1

Need help converting photo jpg to a video file.

So I have a 6 minute animation that was sent to me as a series of photo-jpgs. I need to convert them to a video file rather than a huge sequence of stills so I can add some transitions. The images are 1920 by 1080. I don't want to compress them at all until the final render. What sequence settings should I use and how should I export? I know there a billion and two different ways to do this but for some reason I keep screwing it up.
Jon

As long as the images are sequentially numbered, 001, 002 etc,
1. open up QT Pro and import as a still image sequence and save is as an animation codec.
2. create a sequence using the animation codec as the basis, import all the images and drop them into the timeline.
Recognize that the animation codec requires a huge bit of horsepower and disk throughput to edit in real time.
x

Need help converting a varchar to a date

The following select displays a horizontal column vertically. I need to convert the varchar horizontal column to a date column.
SELECT raso.SRC_SUPL_CD,
case numbers.n
when 1 then
case instr(raso.DT_TM_PHASE_DT,':',1,1)
when 0 then raso.DT_TM_PHASE_DT
else substr(raso.DT_TM_PHASE_DT,1,instr(raso.DT_TM_PHASE_DT,':',1,1)-1)
end
else substr
(raso.DT_TM_PHASE_DT
,1 + instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1)
,case instr(raso.DT_TM_PHASE_DT,':',1,numbers.n)
when 0 then length(raso.DT_TM_PHASE_DT)
- instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1) +1
else instr(raso.DT_TM_PHASE_DT,':',1,numbers.n)
- instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1) - 1
end
end PHASE_DT
from RSSP_API_SELECT_OVERRIDE raso
, (select level n from dual connect by level <= 38) numbers
where length (raso.DT_TM_PHASE_DT) - length (replace(raso.DT_TM_PHASE_DT,':')) + 1
>= numbers.n

An example wouldn't hurt.
As it is now, my reply would be:
SQL> create table rssp_api_select_override
2 as
3 select 1 src_supl_cd, '01:12:2006:14:55:00' dt_tm_phase_dt from dual
4 /
Tabel is aangemaakt.
SQL> SELECT raso.SRC_SUPL_CD
2       , case numbers.n
3         when 1 then
4           case instr(raso.DT_TM_PHASE_DT,':',1,1)
5           when 0 then raso.DT_TM_PHASE_DT
6           else substr(raso.DT_TM_PHASE_DT,1,instr(raso.DT_TM_PHASE_DT,':',1,1)-1)
7           end
8         else
9           substr
10           ( raso.DT_TM_PHASE_DT
11           , 1 + instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1)
12           , case instr(raso.DT_TM_PHASE_DT,':',1,numbers.n)
13             when 0 then length(raso.DT_TM_PHASE_DT)
14                         - instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1) +1
15             else instr(raso.DT_TM_PHASE_DT,':',1,numbers.n)
16                  - instr(raso.DT_TM_PHASE_DT,':',1,numbers.n-1) - 1
17             end
18           )
19         end PHASE_DT
20    from RSSP_API_SELECT_OVERRIDE raso
21       , (select level n from dual connect by level <= 38) numbers
22   where length (raso.DT_TM_PHASE_DT) - length (replace(raso.DT_TM_PHASE_DT,':')) + 1 >= numbers.n
23 /
                           SRC_SUPL_CD PHASE_DT
                                     1 01
                                     1 12
                                     1 2006
                                     1 14
                                     1 55
                                     1 00
6 rijen zijn geselecteerd.
SQL> select to_date(dt_tm_phase_dt,'dd:mm:yyyy:hh24:mi:ss') from rssp_api_select_override
2 /
TO_DATE(DT_TM_PHASE
01-12-2006 14:55:00
1 rij is geselecteerd.Regards,
Rob.

Need help converting Client-Server to JSP

Hi;
I have a purely data driven, dynamic, meta driven program
in Java 1.4. Runs on almost any SQL database, and the
systems analysts can do most of the programming just by
entering the data. All screens and sql are auto-genned
at runtime.
I was wondering if there was anyone interested in helping
convert to JSP. I would be willing to give part of the
company profits. It is better then me asking a million
questions here, although there are lots of great experts here.
-Trent
Thanks.

My personal email address is [email protected] I would love to contact you if you drop me your phone number.
Manohar

Adobe Illustrator Logo on Transparent Background-Need Help with Altering Logo

Hello all!
I have a logo that was provided to me in Illustrator, but I need it on a completely transparent background. When I place it on a file, it's mostly transparent, except for the white area in the "A" and two "O"s. Do you know how I can make this 100% transparent? I've attached a screenshot to show you what I'm talking about. Any advice/help you can give would be great! Thanks! (Also, I'm using CS6)

Thank you so much Kris!
Jennifer Lydon
Keenan Motor Group
215-933-1177 Ext. 2106

Need Help To Extract Logo from Flash File .swf

I have an attached Flash file that is in
.swf format. There is a N64 logo within this file that I'm
trying to extract as a
.png with a transparent background. I've been able to open
it in a program called
Flash Decompiler Trillix and in the sub-menus it has the
logo listed as a frame.
This is about as far as I have gotten and I'm stuck. Perhaps
someone else knows how to do this a little easier. I just need to
find a way to extra the logo that already has a transparent
background and save it in
.png format.
Any help here would be hot." ;)
Logo Flash
File .swf

Hello,
I ran into a similar problem a few months ago. I have the
Sothink Flash Decompiler and what I did was turn the SWF back into
a FLA. I then opened it in Flash and then exported what I wanted as
a PNG image.
Decompilers can extract the actual image whether it be jpeg,
gif, png, etc. But when it's listed as a frame(as you mentioned
above) then the method above is probably the best way to get it.
Good luck

Need help converting project file from Creative Cloud to CS6

Hello.
I started a project file on the Adobe Creative Cloud and I am trying to convert the file to CS6 (as that is what all my editors have). I have all of my time codes generated in Creative Cloud and I need the easiest solution to share the file across platforms with out corrupting it. Any help is appreciated. Thank you.
-A*

I am the director of the project- so I am not very technically inclined to answer these questions, but will try my best. My lead editor dropped out of the project leaving me very confused and I am trying to establish a new workflow based off of her existing project file.
The original project was started in Adobe Creative Cloud. I am now trying to use Adobe CS6 and I am trying to figure out if we can convert a file from Creative Cloud > CS6. If you can provide a list of questions for me to ask my previous editor I can direct them to her and try to provide a more concise answer. Thanks for your help.

Need help converting PDF to a word document!

I paid to have the ability to convert a PDF document to a Word document. When I click on "convert" the area turns gray, and nothing happens. Once before, the document converted, but it did not come out the same. For example, the charts did not convert at all. Any help will be appreciated.

You need the ExportPDF Forum

I need help converting existing logo to transparent?

Similar Messages

Maybe you are looking for