I need help. Earphone won't work on stereo
I have late 2012 macbook pro, upgraded to mavericks, and when i plug my earphone it won't work on stereo. the left earphone doesn't produce sound. I thought it was my earphone but apparently my earphone is fine when i plug it into my phone. Fortunately the internal speaker still works on stereo. Has anyone ever experienced this ? I can't work if there's no music.. please help!
Go to Applications > Utilities > Audio MIDI setup and see what the settings look like for built in output. Maybe the left channel is muted.
I'd try another pair of earphones too. Maybe it's the earphone jack on the computer.
Similar Messages
-
Need help, system won't start up
Need help, system won't start up
When I turn on the system I hear a loud squeaking noise that could be coming from the hard drive, it does it for moment then a blank white screen appears w/ a tiny folder in the middle of the screen with a "?" blinking on and off on the folder. I never had any problems until now. What can I do, any suggestions.hi capitala1,
+When I try to install the operating system to the internal drive, I don't see a destination option for that drive like I did for the external+
Do you mean that it doesn't show up when you try to startup holding down the option key, or that it doesn't show up in Disk Utility when started up on the external disk?
+...You think the drive is bad, if so, what can I do to retrieve some of the data off of it.+
Yes, it sounds like your hard drive is bad. Do you have access to techtools or Disk Warrior? either of these may be able to repair the drive enough to extract your info from it, if disk utility can't.
I know that there are shops that specialize in extracting info from bad hard drives, but they tend to be pretty expensive. I am sure others on this forum will be able to help you find one if you are interested.
PB
PS it isn't going to help this time, but remember in the future, backup, everything important to you regularly! -
Need help getting I Pod Classic to turn on and run, I Tunes shows error 1601.
Troubleshooting: My computer won't turn on
BTW, this is the Mac Pro desktop forum -
Please help - iMessage won't work
So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work. I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
Someone please help ... What do I do? My date & time thing is already set to on as I previously read.If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.
-
Need help setting up my work email
I'm new to Blackberry and need help with setting up my device to receive my work email (we use Outlook). They use BES but since I purchased my Verizon Blackberry on my own, my workplace IT department will not assist me in setting it up. Since the desktop redirector does not allow me to get attachments, that is pretty much not a great option.
We can obtain email through Outlook Web Access, so I tried setting it up through BIS based on other postings. I've tried every combination of user/mailbox names, with and without the full domain name attached, but still getting the error, "A connection could not be established..." I don't believe we have Microsoft Internet Security and Acceleration Server (no /CookieAuth.dll added to web address). On the Web Access log-in page, I do have to select a domain from a drop-down menu, if that somehow plays a role in how I configure things??
Tried setting up a forwarding rule in Outlook, but it seems annoying that all the emails received from the device are from ME, and makes replying a bit painful.
Any suggestions would be great.
Thanks!you can try integrating using POP or IMAP access if available.
and chk this fot typicak OWA integration issues:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02858
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved. -
I need help understanding how this works. AS 2.0
Its my first time here and i only started learning flash today. I aint too great with maths and i was showed this piece of code that makes a triangles point follow the cursor. It involved mathimatical things ( which i aint so great at) and the guy said "You dont need to know how it works, just how to use it." well i copied his code and it worked, but i have no idea how to use it in other rotation apart from the one he taught us. I dont even understand how to redo his code i saved it to a word document and anytime i wanted to make something rotate something in that fashion i would refer to that. But i dont want to have to do that, i want to know how to use it, dont have to understand it, but use it for other rotation matters. If you are going to help, please try to be a bit simmple i explaining it, cause im new. Dont get me wrong i aint thick but i can find it a bit hard to follow some things, that is i my current problem.
here is the rotation code:
onEnterFrame = function()
hero._rotation = getmouse(hero);
getmouse = function(mc:MovieClip):Number
dy = _ymouse-mc._y;
dx = _xmouse-mc._x;
rad = Math.atan2(dy,dx);
rotate = rad*180/Math.PI
return rotate+90
also if it helps, here is the video i was watching: http://www.youtube.com/watch?v=w3OfrpbNhHs
please if you can, explain how the entire thing works.
thanks for any help given in advance.Hi,
Here's a short primer. It may not be sufficient but here goes.
1st, move the closing bracket at the end and put it on the third line. This makes the code more efficient
onEnterFrame = function(){ // this causes Flash to repeatedly
execute the next line at the
frame rate you selected
for your document
hero._rotation = getmouse(hero); // this tells Flash to rotate a
movie clip (named hero) based
on the function getmouse()
}; // putting the }; here makes the
code more efficient and readable
getmouse = function(mc:MovieClip):Number{ // This is the function called with
mc referring to hero that was
passed from the second line.
dy = _ymouse-mc._y; // dy means delta y which subtracts
the y position of the movieclip
from the mouses y position
dx = _xmouse-mc._x; // dx = delta x (same as above line
but on the x axis)
// once you have the x and y sides
you male a triangle.
Now use trig to find the angle
rad = Math.atan2(dy,dx); // the computer works in radians
the arc tangent atan2 will give the
angle in radians
rotate = rad*180/Math.PI // you want to convert the radians to
degrees, that's what this line does
return rotate+90 // this returns the value of rotate back
to the calling function in line 2.
the +90 determines which part
// of the hero movie clip is facing the
mouse.
If you put the mouse cursor over any of the green reserved words above in the Actions panel you will get a desctription of what these do.
hope that helps. -
Flash help, still won't work
I am trying to put a flash video on my website. I tried to
follow all the directions from start to finish, but somewhere along
the way I went wrong. I have a video I made in Final Cut Pro,
exported in QT format. I used the Adobe Flash Encoder to convert
the .mov to a .flv file. Then I imported the .flv file into Flash
CS3 Pro and put a skin to it and saved the .fla and exported as
.swf. Then I went into Dreamweaver CS3 and used the "insert media"
function to insert the .swf file. I got it positioned correctly and
go to view it in the broswer - looks great, autoplay works, skin
appears, etc. So then I upload / "put" to the server and click
"yes" to include dependent elements. But then when I navigate to
the site from the brower, the video doesn't work. In fact, it
doesnt show up at all. All you see is a blank spot where the video
should be. Its probably obvious by now that Im not too terribly
knowledgeable about DW or web design or HTML, but I feel like I got
pretty close and Im frustrated that it won't work. Since it works
perfectly in the "preview in browser" function in DW, I feel that I
am getting close. But my guess is that the error is somewhere in
the upload to server process since it works locally but not
remotely. Any help would be much appreciated as Im getting
frustrated. Below is the URL. The problem could be anywhere in the
process. I tried creating the .fla file with both a local reference
to the .flv file (and then uploading all to server) as well as
creating with a reference to the .flv file after already uploading
to server. Still no cigar. I can look at the remote view and see
that the .html file, the .swf file, the .fla file, the .flv file,
and the script file are all uploaded. Maybe the referencing is
incorrect...just not sure. Thanks !
http://www.spottedtailproductions.com/upstream_flash.html>
http://www.spottedtailproductions.com/upstream_flash.html
Bad link.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"STPfilms" <[email protected]> wrote in
message
news:[email protected]...
>I am trying to put a flash video on my website. I tried
to follow all the
> directions from start to finish, but somewhere along the
way I went wrong.
> I
> have a video I made in Final Cut Pro, exported in QT
format. I used the
> Adobe
> Flash Encoder to convert the .mov to a .flv file. Then I
imported the .flv
> file
> into Flash CS3 Pro and put a skin to it and saved the
.fla and exported as
> .swf. Then I went into Dreamweaver CS3 and used the
"insert media"
> function to
> insert the .swf file. I got it positioned correctly and
go to view it in
> the
> broswer - looks great, autoplay works, skin appears,
etc. So then I upload
> /
> "put" to the server and click "yes" to include dependent
elements. But
> then
> when I navigate to the site from the brower, the video
doesn't work. In
> fact,
> it doesnt show up at all. All you see is a blank spot
where the video
> should
> be. Its probably obvious by now that Im not too terribly
knowledgeable
> about DW
> or web design or HTML, but I feel like I got pretty
close and Im
> frustrated
> that it won't work. Since it works perfectly in the
"preview in browser"
> function in DW, I feel that I am getting close. But my
guess is that the
> error
> is somewhere in the upload to server process since it
works locally but
> not
> remotely. Any help would be much appreciated as Im
getting frustrated.
> Below is
> the URL. The problem could be anywhere in the process. I
tried creating
> the
> .fla file with both a local reference to the .flv file
(and then uploading
> all
> to server) as well as creating with a reference to the
.flv file after
> already
> uploading to server. Still no cigar. I can look at the
remote view and see
> that
> the .html file, the .swf file, the .fla file, the .flv
file, and the
> script
> file are all uploaded. Maybe the referencing is
incorrect...just not sure.
> Thanks !
>
>
http://www.spottedtailproductions.com/upstream_flash.html
> -
Help Ipod won't work with my computer anymore!
I have a 5th gen Ipod and it has been working fine for the first month I've had it but recently I can't seem to get it to work with Itunes or even be detected on my computer. I've already tried all the things it says to do on the support page and none of it seems to be working. I've reinstalled everything and tried the Ipod updater but it won't work. Has anyone else had this problem and if so what should I do? Is there any way I can just get a new Ipod since I've only had this one for a month?
Try putting your iPod into disk mode...
Putting iPod into Disk Mode
Now try to restore it...
Restore the iPod
btabz -
Disc that needs flash player won't work
I have a disc that goes with my textbook for class that
requires the use of the flash player. I bought a new computer for
school that has Windows Vista. I installed the flash player 9, but
the disc still won't play. The flash player works for sites on the
internet, but not for the disc. I tried it on an older computer
that had flash player 7 and it worked fine. But, I heard the Flash
Player 7 won't work with Vista. Is there anything that I can do
about this. Buying a computer was a waste of money if I can't use
it for school - which is why I bought it.Hi Andy, that is correct, they don't support PPC Macs anymore.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
Download this if you haven't...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
Once downloaded if it doesn't unzip automatically the double click on that file.
Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
Or smaller here...
http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
Stand alone player...
http://dl.dropbox.com/u/450421/LastFlashPPC.zip
Or free 3rd party...
http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html -
Help needed. Ipod won't work and won't format.
Hi,
everytime i connect my ipod, it says i need to format. (It shows the folder with exclamation point picture). I used the updater to format, but it doesn't work. "Can't connect the Ipod".
What should I do?
Thnx,
JoyceSee if this helps;
http://docs.info.apple.com/article.html?artnum=61003
Cheers!
-Bryan -
Desperately Need Help: Why won't remote desktop work w/VPN to a PC?
I am seriously losing my mind and the IT people at my job are clueless. I am not that sophisticated but, when it comes to macs, I might as well be a genius in comparison to them. At work I have a PC running Windows Vista. I have installed on my Mac (running Mavericks) VPN through Netextender. I can connect to VPN with no problems. However, when I try to login thru remote desktop, it tells me my work computer cannot be reached. My work computer is most certainly on and reachable. I desperately need to figure this out!! Please help!
Hi Gailkav,
Welcome to the Forums
As per the query we understood that you are facing issue with USB in your Lenovo B50-30 laptop.
Try to connect other USB devices like pen drive, external HDD and check if that is been recognized,
Try to boot the system into safe mode and check for the issue.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Help - i've just got an ipod won't work thru stereo/tv with av cable
ok - so i've bought the ipod and av cable. have funky new tv with red,white yellow audio/video input. nothing happening. playing music on ipod(checked using earphones) but nothing coming thru amp. HELP ... it's for husband's birthday who is computer/ipod illiterate. what do I do to get sound thru?
ok - i'm replying to myself, but just incase anyone else has a similar question, ALL YOU NEED TO DO IS (READ THE DISCUSSION BOARDS FIRST) but if you don't do that then, in main menu, go into Video, Video Settings, TV Out and set TV out to on not off. Then it works a treat with the av (Ryw) cable that apple supplies.
phew! -
Please Help--It Won't Work At All!!!
Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
KellieQuicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows). -
BT Desktop Help still won't work with Windows 7 64...
THis has been going on for a while now. It just won't launch. Emails and screen sharing sessions have produced nothing. One phone call to a representative resuilted in them telling me that the 64 bit Windows 7 version was not available yet - but wait a week or so. I've tried the latests versions and still doesn't work althougth it works fine on Vista. Anyone else still having problems?
Waiting for a call now from level 2 support but i'm not hopeful.Its only a diagnostic tool and has nothing to do with getting the best speed.
It can diagnose simple problems and fix them if possible, reducing the number of calls to the helpdesk
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Need help getting sRGB settings working right.
After reading lots of input from all kinds of sources I decided for my purposes it is best to set my Photoshop CS4 to sRGB. The problem I'm having is that quite often if I drag and drop an image as a new layer on another image I get a warning asking me if I'm sure I "want to convert colors to a destination document with a color profile that does not match the current RGB working space?" It then goes on to tell me that my source is sRGB IEC61966-2.1 and that my destination is Adobe RGB (1998) and that the working is sRGB IEC61966-2.1. Since I have set my Photoshop under Edit>Color Settings to sRGB IEC61966-2.1 and I have my camera's color setting at sRGB I'm wondering why the window is telling me that my destination is Adobe RGB (1998). I initially shoot in RAW and then open my photos in Camera Raw in Bridge and when I'm done with whatever changes I want to make there I simply "Open Image" which, of course, opens it in CS4 where the color setting, again, is sRGB. What else do I need to change to get everything operating under color setting sRGB?
Thanks for any help you can give.The camera color setting only applies to jpegs that you shoot.
If you are shooting in RAW then your image doesn't have a color space applied to it until you open it in Photoshop.
At the bottom of your Camera Raw window is a blue hot link. Click on this to open the Workflow Options.
There you can change the Color Space, Bit Depth. Size and Resolution that your image will open as in Photoshop.
These settings in ACR will override any settings you have for your default color space in Photoshop
Message was edited by: Bo LeBeau
changed color mode to color space,
Maybe you are looking for
-
Burn Purchased Music CD No Track Names
I'm upgrading a few purchased songs to iTunes + and want to copy them to a second authorized PC. The track names show up on the CD when I burn them on the first PC but when I insert the CD into the second PC, I get the msg "Could not find track names
-
Blue Box with White Question Mark
All of a sudden, I started receiving the Blue Box with a White Question Mark in my Safari Internet. I test the site with two other browsers and the behavior was the same. I have not plug-ins recently installed and did clean my cache. Any suggestions?
-
Accept terms and sign in each time a product is used?
Why do we all have to "Accept Terms" and sign in every time we use the CC products. The "Accept Terms" appears every time I use a product. It's not like I haven't already accepted terms and it's an interruption in workflow. So Adobe, why are you maki
-
Video clips from Canon camcorder have wrong aspect ratio in Premiere Elements 11
I recently purchased Adobe Premiere Elements 11 and I'm having trouble importing clips from my Canon FS300 camcorder.The camcorder records widescreen video at 720 x 480 pixels with a 16:9 aspect ratio (presumably using non-square pixels) The clips pl
-
Checking Essbase service state
Hi, Sometimes happens that you can not start any Essbase app which normally starts. The reason could be there is orphaned Essbase process :) and to run app you must kill this process. I would like to automate this process for administrator task. Have