I need help finding an external Thunderbolt drive enclosure that can handle 5 3.5" standard HD's.

I have several 3.5" hard drives that I have had in previous Mac Pro's all with various data on them. I would like help to point me to an external Thunderbolt enclosure to put these drives into. I have learned from a nice lady at Drobo that most enclosures are RAID and that if I were to use the Drobo 5D and place my drives in this device it would format (erase) them! I have also learned that what I'm looking for is something that allows Single/Independent use of the drives. I have a couple of single external enclosures that I could use but they are firewire 400 (not too much of a problem since my MBP has a firewire 800 port and I could use an adapter) however I could only access the data one drive at a time. That would be time consuming swapping out each drive.
The Drobo folks say that none of their products allows for a Single/Independent configuration and they say that most manufactures of multiple drive enclosures do not support Single/Independent use. I have 5 drives that I would like to put in to a single Thunderbolt enclosure. Any help is greatly appreciated.
Granddaie
Message was edited by: granddaie

They've top-notch service - even the owner can be found on some boards here.
I'm sure that OWC will be able to point you in the right direction.
Best of luck,
Clinton

Similar Messages

Need help finding correct external hard drive enclosure for a T61 hard drive

Hi, recently my lenovo T61's video card fizzled out right after the warranty expired. I have information on the laptop's hard drive that i need to get off of it. I have a hard drive enclosure for my old hp laptop's hard drive but the two drive have different connectors. I was hoping someone could point me in the right direction to find a lenovo T61 hard drive compatible external hard drive enclosure.
The hard drive is a 100 GB 7200 RPM drive
Model: HTS722010K9SA00
HDD: 7K200-100
LENOVO P/N: 42T1056
HITACHI P/N: 0A53257
MLC: DA2141

what model is your HP laptop? also how old is it?
Prior to SATA connector there is the PATA connector.
http://archmemory.mobi/index.asp?PageAction=Custom&ID=106&imz_s=4c80f54d8ae8704709fec3ff867052fe
have a look at this.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I need help finding this hp hard drive for dv6521eo

I need help finding this hp hard drive and memory for dv6521eo

Hi:
You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
Memory is PC2-6400.
Paul

I need help finding a replacement hard drive/IR sensor cable for my laptop.

I have a 17" Macbook Pro from September 2009, and the hard drive cable has ripped at the junction where the hard drive cable and the IR sensor cable meet.
My brother needed to use my comp to try to transfer stuff from the hard drive from his broken laptop to an external hard drive, and the cable ripped the second time he was fiddling with it.
Here are some pics:
http://i48.tinypic.com/2qmgjgx.jpg
http://i48.tinypic.com/2i1gq5v.jpg
http://i49.tinypic.com/wqx838.jpg
http://i48.tinypic.com/f03xbb.jpg
http://i48.tinypic.com/23r0j5t.jpg
http://i47.tinypic.com/f4r6gh.jpg
When searching for "macbook pro unibody 2009 17" hard drive/ir sensor cable" it doesn't come up with any for the 17" but it comes up with a bunch for 13" and 15" and it seems like the 15" ones would work for my computer.
(Like the one in the picture on this page: http://www.ifixit.com/Guide/Installing+MacBook+Pro+15-Inch+Unibody+2.53+GHz+Mid+ 2009+Hard+Drive-IR+Sensor+Cable/1520/1)
I'm having no success finding a cable that looks just like the one in my comp that's specifically for the 17" that goes to the hard drive AND the IR sensor. For example, all I've been able to find so far are things like this:
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-17-Inch-Unibody-Hard-Drive-Cable /IF162-015
which does not appear to be the cable I need, as it doesn't seem as though I could attach the IR sensor cable to it.
Any and all help would be greatly appreciated.
~Cass
[I don't remember the exact OS I was at, but I'm pretty sure it's 10.6.something]

The dv7 notebook Maintenence & Service guide has the information that you need. See the illustrated parts list for the part number.
From the manual:
Supports the following double hard drive
configurations:
● 2 TB: (1 TB, 5400 rpm, 12.5 mm × 2)
● 1500 GB: (750 GB, 7200 rpm, 9.5 mm × 2)
● 1500 GB: (750 GB, 5400 rpm, 9.5 mm × 2)
● 1 TB: (500 GB, 5400 rpm, 9.5 mm × 2)
Hard drive (2, 2.5-in, SATA, does not include bracket, connector cable, Mylar shield, or screws):
1-TB, 5400-rpm, 12.7-mm 638974-001
750-GB, 7200-rpm, 9.5-mm 633252-001
750-GB, 5400-rpm, 9.5-mm 634250-001
640-GB, 5400-rpm, 9.5-mm 603785-001
500-GB, 7200-rpm, 9.5-mm 608218-001
500-GB, 5400-rpm, 9.5-mm 634932-001
320-GB, 7200-rpm, 9.5-mm 634862-001
320-GB, 5400-rpm, 9.5-mm 622643-001
Hard Drive Hardware Kit (not illustrated, includes bracket, connector cable, Mylar
shield, and screws) 665597-001
You can order the parts through the HP Parts Store online. You can save quite a bit of money by ordering the identical parts from another online vendor.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help setting up external hard drive for FCE project

Hi folks,
Basically I am looking at making a 20-30 minute video this summer of my motocross adventures and what not and have equipped myself with an iMac (2.93 GHZ Core2Duo 640GB 4GB) and of course, FCE. I have tried smaller projects before (ranging in length between 20 seconds to upwards of a few minutes) but have noticed an overall decline in computer speed which I am under the impression is being caused by the 10s of GBs of video project files and what not that seem to be scrawled away within my computer. Before I made any videos, my computer was sitting around 560 GBs of free space. Since making maybe 3-4 videos (50/50 iMovie and FCE) its down below 400GBs. I'm not sure whether it's the raw video files or the projects themselves that are so large, but it's slightly frustrating. Is there any sort of software (either third party or apple) that can look at your hard drive and tell you exactly where all the biggest files are? I'll post this question in the iMac forum as I realize this is for FCE, but I thought if anyone knew of one it would be extremely helpful.
Anyways, I have a SimpleDrive 320GB external HD that I plan to use as my external for making this project within FCE and would like some help in terms of how to set it up with FCE, what are the best settings etc. It is currently formatted with Windows, so I will also need help in setting it up for a Mac. I do have about 120GBs used on it already and was also wondering if I could keep this when re-formatting, but I'm pretty sure I already know the answer to that.
Sorry for the long-winded post; any information on this or something related would be fantastic. Thanks.

Yes, you can use your external HD with FCE ... provided it is formatted as +Mac OS Extended+ and is connected via FireWire.
You will need to back up any data that is on the drive that you want to keep. Before reformatting it. Formatting erases everything that is on the drive.
Use Disk Utility (located in your +Applications > Utilities+ folder) to format the drive.
After formatting the drive, go into +FCE > System Settings+ and change your FCE scratch disk location to the external drive.

Need help with networking external hard drive

Hi,
I am working on a corporate network and I have a Western Digital My Book Studio Edition external hard drive attached to a Mac OSX 10.4. i have other Macs connecting through the network to this Mac and accessing the external hard drive and it works just fine for that.
What I need help with is the fact that I also have several PCs on the same network (all XP), that need to connect to the hard drive and access the files. I've been able to connect to the Mac using the XP by accessing the IP address. I also set the Mac up with password credentials so that I had to log in to the Mac to access the files. But when I try to access the Mac, it only shows the main computer drive as the only available share and no external drive.
Does anyone know how to access a Western Digital external drive on a Mac from a PC through a network?

For an external hard disk drive or other (different) system shared
storage devices to work, they probably should be formatted in a
format seen by both operating systems.
If the WD unit is not seen by Windows computers on your network,
the WD may have been formatted in HFS+ for the Macintosh. That
is OK unless you need a Windows computer to access the same.
The Macintosh can see and use a standard Windows disc format;
so the external drive may need to be reformatted away from HFS+
if that is really what is going on (and archive any data on the suspect
drive elsewhere, since it will be lost to reformatting overwrites)
and then both Mac OS X and Windows should see the files on there.
And Macs set up to run Windows may also see the non-Mac format;
without having to re-boot via BootCamp, if that option is in use.
As to the other question(s) I really have no idea at this point in time.
And since that may be the rub, hopefully someone will follow up here.
Good luck & happy computing!

Need to find my external hard drive folder

I have a Passport as an external hard drive and when I plug it into the USB drive I cannot locate it on my computer.

Do you have the External Devices checked in "Finder Preferences"? You can open by selecting the menu item (while in the Finder) "Finder > Preferences"
x`

Need Help with my External Hard Drive

Hey Guys, so i bought a 2TB WD Passport for Mac about 2 months ago...It worked great, but then i dropped it by accident. It was connected to my Mac at the time, so when it fell it disconnected from the cable and fell. Now when i connect it, the external hard drive powers on. I can feel it on like always, the little light turns on as well, its flickering as if it was in use. The thing is that it wont show up ANYWHERE on my mac. Any help?

LittleGuy16 wrote:
got dropped........It was connected to my Mac at the time
HEAD CRASH ,    your HD is extremely likely kaput
hard drive moving parts
Some of the common reasons for hard drives to fail:
Infant mortality (due to mfg. defect / build tolerances)
Bad parking   (head impact)
Sudden impact /head crash (hard drive jarred during operation, heads can bounce)
Electrical surge   (fries the controller board, possibly also causing heads to write the wrong data)
Bearing / Motor failure   (spindle bearings or motors wear during any and all use, eventually leading to HD failure)
Board failure   (controller board failure on bottom of HD)
Bad Sectors   (magnetic areas of the platter may become faulty)

External hard drive format that can be usable for both MBP and TVs?

I recently bought a new MBP and found out I can not copy and paste files to my external hard drive as it appears to be 'Read- Only' because of the format. I then changed the hard drive's format to FAT32, which I was able to write files on it from MBP. However, my TV won't read the hard drive anymore which I really need it to because the whole purpose of the hard drive is for me to download movies from the laptop and watch it on the TV through the external hard drive. I've always done it with my PC tons of times but just really new with the MAC OS systems.
Is there any other format I could try that work for both or any other ways?
I'm using the SeaGate Goflex desk adapter USB 1.5TB and LG TV (not too sure what model).

Check the TV's documentation. If you find that it requires NTFS, install software such as Paragon NTFS on the Mac.
(119325)

Help with an external hard drive enclosure

I had a Power Mac G5 that had a motherboard which died. The hard drives were still good so I purchased the "EAGLE Consus D-Series ET-CSDU2J-BK JBOD 2Bay SATA to USB 2.0 External Enclosure". I have it on the setting which both of drives show up on the desktop individually. So far it works and everything is great but I would really like to make it so it combines both hard drives (two seagate 160GB of the same model) into one 320 hard drive. I have a macbook pro running OS X. Do i have to reformat and erase everything before I change it to spanning or can i just switch the jumper and have one hard drive image with all my data still on it? Thanks
Here is the online manual if it helps http://www.eagletechusa.com/Download/ET-CSDU2J-BK_UM.pdf

RAIDing the two will destroy the data on the drive. I'm sure that's explained in the manual.

[HELP] My MSI External Hard Drive Enclosure cannot be recognized by my laptop...

As the subject tells my MSI cannot be recognized by my laptop...
At first I thought that my laptop is the one at fault but i tried inserting it on my friends computer but still doesn't work.
Then I blame the USB connector but tried using it on other devices and it works.
The only one left to be blamed is the device itself.
the model of this device is MSI UH1000-K500
Before this device broke(i guess) I am copying my important files to my PC.
I cant seem to see the drive in my "drive manager".
But I can see it on "Devices and printer"
Can anyone help me how to fix this?
I really need your help...

nope it didn't got partitioned/formatted...
I'm sorry for late reply been busy this past few weeks...
I already returned the device on the seller because it is still in warranty period...
thx for the help anyway...

Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

Need help finding my camera[webcam] on my computor.

Can you provide us with your computer model number? Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam. If not, is there an Unknown Device listed? This would indicate that your webcam is detected, but there is no driver installed. We can help you find the correct driver if that is the case. Let's start with the computer model number. Thanks.
I am an HP employee. The opinions expressed are my own and not those of HP.

HT201250 Do I need to partition my external hard drive if I'm using Time Machine and other storage?

I never used Time Machine before. I was storing select files on my external hard drive as well as using my libraries (IPhoto, ITune, IMovies) directly off of the external hard drive. That hard drive is giving me problems, so I bought a new one. I want to set up Time Machine on this one, but I also want to keep my active libraries on it. Do I need to partition the external hard drive?

You can partition the new drive, just don't make one of the partitons a TimeMachine drive, save a TM for a entire drive with more space than the boot drive as it saves "states" thus requires more room than most people expect.
I highly advise one drive to one drive for backups, and not placing too many backup eggs in one vulnerable hardware basket basically.
Drives are cheap, data is not. Hardware can fail just as often as software, so you need a multiple backup and storage stragedy to protect even against theft and fire.
Most commonly used backup methods

Recommended SCSI to SATA converter for older external hard drive enclosure?

I have a SCI external hard drive enclosure that I would like to be able to use a with a SATA drive. Can anyone suggest an inexpensive, reliable SCSI to SATA bridge board?

Those are both good points. It's a really nice enclosure (its a red FW400 drive that instead of being a rectangular box, it has this funky wave shape). I could just use the drive with an existing SCSI drive and make it for something that doesn't need high r/w speeds like documents.

A big thank you to the person who said to go to edit/preferences/advance tab. I did that but I could not find my external hard drive which is a passport. I could not find it on my pc or control panel. I know it it there. Help!!!

A big thank you to the person who said to go to edit/preferences/advanced tab. That helped. My external hard drive is a passport. I know I have it , I just can't findit. Not in control panel or desk top. I don't know how they named it. Please help!!!

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

I need help finding an external Thunderbolt drive enclosure that can handle 5 3.5" standard HD's.

Similar Messages

Maybe you are looking for