I need help finding my system preferences...it's not letting me get into it at all

can anyone help me
because i can't go into it my time an date or wrong which is causing more problems

You may have some file corruption. Things to try.
Boot using your install/restore DVD & run Disk Utility on your hard drive.
If you don't have a DVD,  boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
Takes a while to run, but it usually "fixes" problems.
 Cheers, Tom

Similar Messages

  • I need help finding an app that can take 2 pics and make into 1

    I am looking for an app for my iphone 4 or ipad that I can take two pics from my camera roll and make them into one picture so it looks like the two people are at the same place. Any help is appreciated. I have downloaded so many and none seem to have this function. Thanks !

    There should be some great ones here:
    http://appadvice.com/appguides/show/apps-to-stitch-photos

  • Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

    Hello, I need some help.
    I have a HP DM3-1130us Laptop that will not power on at all.
    the only thing that happens when I plug it in is the power jack lights up.
    When the power button is used absolutely nothing happens.
    No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
    just the light by the power jack that says the cord is plugged in.
    The laptop has Windows 7, 320gb hdd, 4gb ram.
    I have tried new power adapter and still nothing.
    I have taken the battery out and tried and nothing.
    I've tried the option where you take the battery out and hold the power and nothing.
    I have tried with different hard drive and no hard drive and nothing.
    I have tried reseating the ram and tried new ram modules still nothing.
    So I am kind of stumped on what to do, the laptop will just not turn on.
    Its not under warranty anymore so cant send it off.
    It has not been exposed to any elements(extreme heat or water).
    and its never been dropped or anthing.
    Im kind of wondering maybe the power button board its self is bad?
    If feels fine, its not loose or anything but could it
    have just stopped working? for those who are not familiar with this model.
    the power button is on the side and is a kind of drag and release button.
    Its also on the same board with the Wifi button and 2 Usb ports.
    But Im wondering before I buy a new one if this is what it could be.
    Or could the motherboard its self be bad?
    But even if the motherboard is bad would it still power up
    just not post?
    Also does anyone know of any other way to try to power this laptop up
    without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
    If anyone can provide any information I would appreciate it.
    Thank you.

    Hey Tyler,
    Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
    You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
    I hope this helps answers your questions,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Need help finding a audio system ( stressed)

    I have cd with over 100 songs , and I need help finding  a boombox  that will play the CD anyone have any idea, I got no help from the store.

    here are the  specifications  for Philips eXpanium eXp 2461 , if somone can help me find a boomboox with simular specifications it would very helpful
    Philips eXpanium eXp 2461 - CD / MP3 player
    CD System
    CD system type CD / MP3 player
    Media load type Top-load
    Playback modes Repeat all,
    Resume play,
    One track repeat
    CD system response bandwidth -19980.0 Hz
    Signal-to-noise ratio 85.0 dB
    CD shockproof memory 45 seconds
    MP3 shockproof memory 100 seconds
    CD-R compatible Yes
    CD-RW compatible Yes
    CD track programming Yes (50 tracks)
    Digital audio standards supported MP3
    Supported bit rate 32 - 320Kbps
    General
    Product type CD / MP3 player
    Weight 8.0 oz
    Carrying Case
    Case type None
    Built-in Display
    Audio system built-in display LCD
    Audio Features
    Sound effects Digital Dynamic Bass Boost (Digital DBB)
    Sound output mode Stereo
    Additional features

  • I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

    I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures.  what can I do to correct this?

    Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

  • [Athlon64] Noob needs help optimizing new system

    Sorry to post yet another thread, but I've been lurking for the past few days and I only get bits and pieces of what I need. I'm pretty clueless about this stuff as it's my first home-built system
    See my sig for system info...
    I'm needing help with bios settings. The pertinent stuff (I think - hopefully I got it all down):
    CELL MENU
    CPU Clock speed: 2200
    DDR Memory Freq: 100.0 MHz
    High performance mode: Manual
    Cool n quiet: Disable
    HT Freq: 800 MHz
    Dynamic overclocking: Disable
    Adjust CPU Ratio: Auto
    AGP Freq: By Default
    HT Voltage: Auto
    Mem voltage: Auto
    CPU voltage: Auto
    AGP Voltage: Auto
    Spread sectrum: Disable
    DRAM
    DRAM Clock Mode: Manual
    Mem clock value: DDR200
    CAS Latency: SPD
    Burst Length: 8 Beat
    Bank Interleaving: Auto
    Active to CMD (Trcd): SPD
    Active to precharge (Tras): SPD
    Precharge to active (Tvp): SPD
    DRAM IT Timing: Disable
    ADVANCED CHIPSET FEATURES
    AGP Mode: Auto (this is "greyed out")
    AGP Fast write: Enabled
    AGP Aperture size: 128
    VLink 8X supported: Enabled
    My questions mainly concern memory. I bought all this stuff at the Tiger Direct outlet store in Naperville, Illinois. I had intended to buy the K8T Neo-FSR (754 pin), but they were supposedly out of the 754 pin 3400+, and this board/CPU combo had a $100 rebate. Yeah, it's one of those deals with the odd 939 pin 3400+ that everyone has been talking about.
    In any case, I already had the Corsair CMX512-3200C2PT picked out, as Corsair said it was compatible with the board. I wasn't aware of the MSI compitibility chart until I came here later that night. I STILL can't find that chart off of the MSI web site.
    Anyway, I got it all hooked up and got the standard 4 red LEDs. Not knowing what to do, I took it back to Tiger Direct and the tech played around with it until he stuck an el-cheapo stick (Corsair VS512MB400) in there and it worked. But it only works in slot 2. So here I am.
    I started to run memtest86, but it took too long to run and I aborted it for now. For what it's worth, it said the RAM CAS value is 2.5-2-2-5. I don't know what the hell that means, but I know it's important.
    My questions:
    1. I assume I need manually to set my memory clock value to DDR400?
    2. Now that I can get the thing to post, is there any chance I could get the "good" Corsair memory to work by setting the correct latency/CAS values? Again, I don't know what I'm talking about, so forgive my ignorance. What I'm wondering is if I can set everything to what Corsair recommends while I have the cheap memory in there and then replace it with the good stuff?
    3. With this board, am I better off with double-sided or single-sided sticks? As I said, I went into the store intending to buy the Neo 754-pin board, but they were out of the Athlon 3400+ in 754 and only had the 939 pin.
    4. Anything else in my bios settings that stand out and need to be addressed? I want to make sure everything is optimized.
    EDIT: I almost forgot: My CPU temp is runing around 42-49 degrees. Am I in the danger zone? I just bought a generic cooler for now and intend to get a Thermalright XP-120, but I can't find it locally, so it will have to wait.
    AND FINALLY...
    I don't know if this is related to anything above, but I have been having a hell of a time getting the 6600GT to run DirectX9+ games. The latest drivers for Windows 98SE was 66.94. Yes, XP will be installed soon, but for now... It was failing on dxdiag test for Direct3d 9 and also the third DirectDraw test. I was about to give up and take it back when I discovered that a new beta driver came out today (71.84). I installed it and it passed all of the dxdiag tests. I thought I was in hawg-heaven, but when I run Call of Duty (the only DX9 game I have besides HL2), it slows to an absolute clawl. The level starts out somewhat normal at first, but quickly slows down to the point that performance can only be measured in seconds per frame! All of the patches 1.5 and 1.51 for UO have been installed, but that shouldn't make a bit of difference.
    If I don't get my CoD fix soon I'm gonna reinstall that Geforce3.
    Thanks much and sorry again for such a long post.

    Thanks everyone for the recent replies, but I started this thread almost a month ago (March 3rd), and much has changed since then.
    New PSU (see sig).
    Replaced the PNY Geforce6600GT with a eVGA 6800
    Added another stick of the Corsair Value Select 512 RAM. I didn't even bother trying to get the "primo" CMX stick to work. I just returned it.
    Went from Windows 98SE to XP Home.
    The PSU did nothing for me at all, but I suppose it's better to have some headroom in the amperage.
    The biggest performance booster was the additional 512MB of RAM. It wouldn't have done me any good in 98SE, but I was shocked at how much it helps XP. Quitting a game is almost instant now, where before it would take a good two minutes or so for XP to recover itself.
    As for games running slow, the 6800 fixed it right up. CoD absolutely screams now, as does everything else I've thrown at it (HL2, Doom 3, Far Cry). I think the 6600GT was just bad or there is a serious driver problem with the 6600GT's. Went from 3DMark03 score of around 5000 (when it didn't crash) to above 9000 now. And this was all before adding the additional RAM.
    Oh yeah, I bought a 74GB Raptor. No RAID for now though. So far I'm not real impressed with the performance. I'm running off of the VIA controller, since my board doesn't have the Promise controller. I don't see much improvement in loading times as compared to the 40GB 7200rpm Maxtor I have running on IDE1. The only time it beats the pants off the Maxtor is defragging. But there's only so much entertainment value in that.  The Sandra "file system benchmark" gave me 57 MB/s, which seems pathetic, but I've read some posts here where others are getting an identical rate.
    And I'm not too happy to discover, too late, that my overclocking capabilities are severely limited while using SATA.
    I do have one more question for now:
    When I installed the second 512MB stick, I originally had both sticks in slot 1 and 2. I ran Sandra's memory bandwidth benchmark and got a much lower score than with the single stick (around 3500 MB/s). WHen I had the sticks in 1 and 3, it jumped up to close to 6000 MB/s. Why is that? Just curious.

  • Need help finding my iphone serial number but my phone is dead

    Need help finding my iphone serial number but my phone is dead

    no one here can help you find it.

  • Hello my keyboard it lights up even when I activate the icon in the system preference, I do not know what to do, please help me

    hello my keyboard it lights up even when I activate the icon in the system preference, I do not know what to do, please help me

    I am getting this exact same message on my phone!  That it is linked to apple ID 1****@qq.com - this has got to be a bug right?  My phone was linked to my apple ID but then I restored it and now it is saying it is linked to be above.  It is a little be too weird that @wqy8972222 is also getting that same message?

  • Cannot find the system preference icon on my Power Book G4

    Cannot find the system preference icon on my Power Book G4

    This is from memory, since I do not have a pre-10.5 OS on any computer.
    Check the Applications folder. System Preferences is there.
    What version of Mc OS X are you running?

  • I need help finding this hp hard drive for dv6521eo

    I need help finding this hp hard drive and memory  for dv6521eo

    Hi:
    You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
    Memory is PC2-6400.
    Paul

  • HT1349 I need help finding an old library that itunes states my ipod is already linked to

    I need help finding an old library that it states my ipod is already linked to.  My computer recently had a terrible virus and needed to be wiped clean.  I had to redownload itunes and I bought several songs.  I want to add them to my old library because I had several cd's that I had uploaded.  Is there a way to find that old library and combine them without having to erase all the songs that are currently on my ipod???  Thanks

    Umm.  If you wiped the hard drive, then all old libraries are gone unless you have them on backup.

  • Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

    Need help finding my camera[webcam] on my computor.

    Can you provide us with your computer model number?  Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam.  If not, is there an Unknown Device listed?  This would indicate that your webcam is detected, but there is no driver installed.  We can help you find the correct driver if that is the case.  Let's start with the computer model number.  Thanks.
    I am an HP employee. The opinions expressed are my own and not those of HP.

  • Need help finding Sound and Vibration Toolkit Example Files

    I need help finding some Sound and Vibration Toolkit Example Files?
    http://www.ni.com/white-paper/3779/en
    From this link you get:  getting_started_otb.llb
    The missing files are:
    OAT Truncate Time Indices.vi
    Speed profile.ctl
    oa_Config Time or RPM Segment.vi
    svl-Complex Datatype Default.vi
    Running Windows 7, LabVIEW 2011, 32bit
    Sound and Vibration Measurement Suite
    Sound and Vibration Toolkit
    Thanks,
    -SS
    Solved!
    Go to Solution.
    Attachments:
    License S and V.png ‏4 KB

    SS,
    You can find these files here:
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Tach Process\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    svl-Complex Datatype Default.vi changes to svc-Complex Datatype Default.vi
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\_NISVFA\_Shared subVIs\Common
    Make sure you are license activated, and you will have to dig through the *vi and relink a subvi.
    Then you should get a white arrow.
    -SS 

  • HT4061 i need help finding my iphone 4

    i need help finding my iphone4.  i didnt have the app find my iphone i bought the phone from my friend ... so i dont know the serial number but i do have his name and phone number also it carrier plan .... i need to freeze the phone they are able to make call to my family member that have iphone

    If you did not set up the find my iphone feature on the iphone itself then you cannot track it.
    Change your passwords and alert your carrier

  • HT5622 I need help finding a movie that I downloaded, can anyone help me with this?

    Hello, I need help finding a movie that I downloaded, can anyone help me with this?

    If you downloaded it to your iTunes library it will be in the Movies folder.  If you downloaded it to an iOS device you will find it in the Videos app.  This explains how to redownload previously purchased videos (available in some locations as long as the studio permits it): http://support.apple.com/kb/PH12283.

Maybe you are looking for

  • How to create a drop down box and text box in screen painter?

    Hi i am totally new to this concept of screen painter..please can any tell me how to create drop down box in screen painter? How to create or display default date and time values? How to create text box for giving comments? How to store the records t

  • How can I set a default file for JFileChooser

    Hi. I am developing a p2p chat application and I have to unrelated questions. 1. How can I set a default file name for JFileChooser, to save a completly new file? 2. I have a JTextArea that I append recieved messages. But when a message is appended,

  • Error in solaris 10 installing 6.3 DS

    hi i get an error when starting cacao Error: Exception thrown by the agent : java.net.MalformedURLException: Local host name unknown: java.net.UnknownHostException: unknown: unknown i see tomcat running good when i ask for dscc i get above error ,see

  • How to execute SQL Query in Code behind Using infopath 2010?

    Hi, I've repeatable on infopath form, and want bind it throuth code behind from SQL table. My question is that how to execute SQL Query in code behind from infopath as well as how would get Query result to bind repeatable control? Thanks In Advance S

  • Printing on watercolor paper - HP Deskjet 2050A (J510g)

    I have failed to determine the best weight of paper for my printer. I want to print on watercolor paper 300grams in weight or less hence if this is capable of being done?