I need help for cloud and ios5
Help me for cloud and ios5
Sounds like I have a similar problem. I just updated iPad, and iPhone to iOS5. I synced these devices with my iMac on iCloud. Calendars and contacts synced just fine. However for some strange reason I can no longer sync any music on my 32 GB iPhone. iTunes is telling me that I am beyond the phone's capacity with an "Other" item that is nearly as large as my music collection. Am I missing something here? Your help will be greatly appreciated.
Similar Messages
-
Need help for Update and cancel SalesOrder
Hi All,
I written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
can give any related links for update and cancel salesorder.
Thanks and Regards,
SrinivasHi srinivas.L
It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
Dim oOrder As SAPbobsCOM.Documents
oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
If oOrder.GetByKey(530) Then
oOrder.Lines.SetCurrentLine(1)
oOrder.Lines.WarehouseCode = "01"
If oOrder.Update() <> 0 Then
MsgBox(oCompany.GetLastErrorDescription)
End If
Else
MsgBox("Nothing found")
End If
Hope this helps -
Need help for ACL and NAT for VoIP
Dear experts
I configure my PBX server to work with one VoIP provider. When I put the server in blank network, mean that without VLANs.
The IP PBX server can register to the VoIP provider system normally and I can make call out and receive calls normally.
However, when I put the PBX behind the Cisco router with some configuration. The PBX cannot register with the VoIP provider system.
Eventhough I can receive calls from outside but can not make a call from inside to outside, because of the PBX cannot register.
Could you please help me to point out what is wrong with my Cisco router configuration.
Thanks a lot
Building configuration...
Current configuration : 1982 bytes
! Last configuration change at 17:18:27 UTC Mon Feb 24 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$ZJEF$8np0QvQTD1nTaOosa9yGW1
no aaa new-model
memory-size iomem 20
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO2911/K9 sn FTX1603AH9C
interface Embedded-Service-Engine0/0
no ip address
interface GigabitEthernet0/0
description internal-LAN
ip address x.x.x.4 255.255.0.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.1
encapsulation dot1Q 11
ip address 172.x.x.1 255.255.240.0
interface GigabitEthernet0/2
description internet
ip address 50.x.x.93 255.255.x.x
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 100 interface GigabitEthernet0/2 overload
ip nat inside source static udp x.x.x.8 5060 50.x.x.93 5060 extendable
ip route profile
ip route 0.0.0.0 0.0.0.0 50.x.x.94
ip route 172.16.240.0 255.255.x.0 x.x.x.5
ip route 172.16.242.0 255.255.x.0 x.x.x.5
access-list 100 permit ip x.x.0.0 0.0.255.255 any
access-list 100 permit ip 172.16.240.0 0.0.0.255 any
access-list 100 permit ip 172.16.242.0 0.0.0.255 any
access-list 100 permit udp any any range 5004 5090
access-list 100 permit udp any any range 10000 20000
control-plane
line con 0You really don't want to use NAT with SIP. Odds are it won't work. This is because SIP embeds hostnames/IP Addresses inside the packets, and standard NAT does not look inside packets.
If you want a NAT-type functionality for SIP, you need something called a session border controller. Look up Cisco CUBE
http://www.cisco.com/c/en/us/products/unified-communications/unified-border-element/index.html
https://supportforums.cisco.com/docs/DOC-17964
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/99863-cube-config.html
GTG
Please rate all helpful posts. -
Hi all
I setup a router 2911 with the configuration below for the phone system inside handle all calls in and out from and to the outside provider VoIP.
I can receive the calls from outside all time but I cannot make the call from the inside to outside.
I think that I miss some configuration in router.
The 172.a.b.c is the IP phone system.
Please give me any advice
Thanks a lot.
The router configuration:
interface Embedded-Service-Engine0/0
no ip address
interface GigabitEthernet0/0
description internal-LAN
ip address 172.x.x.4 255.255.x.x
ip accounting output-packets
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.1
encapsulation dot1Q 11
ip address 172.16.208.1 255.255.240.0
interface GigabitEthernet0/2
description internet
ip address 50.x.x.93 255.255.x.240
ip accounting output-packets
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 100 interface GigabitEthernet0/2 overload
ip nat inside source static udp 172.a.b.c 5060 50.x.x.93 5060 extendable
ip route profile
ip route 0.0.0.0 0.0.0.0 50.240.226.94
ip route 172.16.240.0 255.255.254.0 172.10.0.5
ip route 172.16.242.0 255.255.254.0 172.10.0.5
ip access-list extended VLAN-voice
access-list 100 permit ip 172.x.0.0 0.0.255.255 any
access-list 100 permit ip 172.16.240.0 0.0.0.255 any
access-list 100 permit ip 172.16.242.0 0.0.0.255 any
control-plane
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
endYou really don't want to use NAT with SIP. Odds are it won't work. This is because SIP embeds hostnames/IP Addresses inside the packets, and standard NAT does not look inside packets.
If you want a NAT-type functionality for SIP, you need something called a session border controller. Look up Cisco CUBE
http://www.cisco.com/c/en/us/products/unified-communications/unified-border-element/index.html
https://supportforums.cisco.com/docs/DOC-17964
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/99863-cube-config.html
GTG
Please rate all helpful posts. -
Hi i'm Alex and im having problems setting up my email and bbm on my blackberry curve 8520. i'm with orange as a dolphin plan and just wondering if any one can help set up my bbm and enterprise Activation Password.
Hello !
It seems you dont have BlackBerry Internet Service (BIS) Plan activated on your device.
Please contact your Service Provider for activating it.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks. -
Need help for coding and designing
Hi All,
Problem Statement
A financial institution is in the verge of automating their existing “customer data management” system. Currently they are maintaining their
customer data in a comma separated file (CSV) format. You, as a software consultant have been requested to create a system that is flexible,
extensible and maintainable. Your proposed system should also take care of moving the data from the old system to the new one.
Customer has following specific requirements
1.This is an internal offline application and need not be a web based solution
2.The new application should be cost effective
3.The application should have good response time as compared to the ones suggested by other vendors
4.Phase 1 work should concentrate mainly on building a simple system which moves the data from CSV to the new one and display the
moved data on the screen.
Sample CSV file containing customer data
<first name>, <age>, <pan number>, <date of registration>
Ramesh, 28, JWSLP1987, 30/01/2006
Rajesh, 32, POCVT2087, 23/10/2005
Shankar, 39, TRYUP3945, 24/7/2003
Shyam, 45 BLIWP5612, 15/3/2004
Requirements for coding DOJO
•Ensure that your solution is built around open source frameworks and tools to avoid licensing issues. (Ex: Eclipse, MySQL, etc)
•Please give me any idea to write code for this issue.
Thank you.
Edited by: user636482 on Oct 28, 2008 2:03 AMThe first requirement is to NOT use software like "Oracle".
The specifications are to use a CSV file as the "data source". The case asks you to "move" the data from CSV to "the new one" and display the moved data.
So this sounds more like a data load routine -- but not to load into Oracle.
You are in the wrong forum. -
Need Help for Itunes and quicktime
Hi there,
I just formated my computer and my os is windows 2003 server. When I installed itunes, everything is fine however when I installed quicktime I got an error code : -3. What's going on? and after I done with the installation, I couldn't open an itunes as well I got an error message said : The exception Privileged instruction. (0xc0000096) occurred in the application at location 0x7ca2af84. I don't know what happened I did install itunes and quick time under windows 2003 before and it works fine, but now I got an error. I appreciate the answer, Thanks in advance.by any chance, did you try downloading the QT Player
from the "QuickTime 7.1 with iTunes 6 for Windows
2000/XP" link on the QT download page? that one
actually leads to an itunes/QT installer bundle.
I did it this way
let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes
launch properly again?
I did like you said and I can not even uninstall quicktime from my computer. When I double click the installation package: It shows
Unhandled Exception
Error Number : 0x80040707
Description : DLL function call crashed : QTInstallCode.QuickTimeUninstallProc
Setup will now terminate
Also, itunes does not launch properly. I think there is something wrong because when I install the windows from the cd I can install and run these two programs(itunes and quicktime). They work fine and no problem at all. However, after I update windows by using windows update web site, I couldn't use these programs since then. I have no idea what is going on? Before I reinstall my os, I also use windows server 2003 with sp1 and I could run these two programs. I think may be the new version of itunes and quicktime that they put on the web site have some issues with the windows server 2003, not sure about that.
Thanks.
(if you get an error message on the QT standalone
reinstall, let us know what it says. include error
message numbers if you're getting any.)
love, b -
I need help for install and configure password sync from AD to OID
Hi guys!
I need to sync passwords from AD to OID, first all, ¿What software do I need? I read some docs and don't find the good config.
I'm trying with:
-Database 11g
-Weblogic 11g
-SOA 11g
-IDM 11g
-IAM 11g
First I install the Database and load the schemas with RCU, next install Weblogic without domian, next install SOA, next install IDM (OID and DIP) in a new Weblogic Domain, next install IAM, next configure IAM in the domain created before, next configure SSL, check the config by using ldapbind, next configure DIP.
It's that ok?
¿What I am doing wrong?
Thank you all.If all you need is AD & OID then OIM is not required. DIP alone can handle this
Password sync should work using DIP. if this is not working then check synchronization mapping and verify that password attribute is also part of this AD-OID sync. Enable debug in synchronization profile or raise an Service Request with Oracle support.
Check
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_actdir.htm#CHDIGDEH
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_config_integration.htm#BABBFAAJ
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_adpasswordsync.htm#CHDBIIJC
Atul Kumar -
Hi, guys,
I am being involved in a project.My current task is to build an interface using java. This interface will obtain some information from a linux-based software called NistNet, which is done by C and has GUI as well. My question is, can I use this java-based interface to obtain some information that is typed in this NistNet'GUI? If I can, how can I do that?
Any hint available?
Thanks!You can bridge between Java and C using the "Java Native Interface" (JNI). There used to be a good tutorial on this site but it vanished for no apparent reason in some resent update, so try a websearch.
See also
http://java.sun.com/j2se/1.4/docs/guide/jni/
http://java.sun.com/j2se/1.5.0/docs/guide/jni/ -
hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
created an account but haven't yet purchase any products yet! I'm a publisher launching a magazine so i need something for design and making a layout for magazine! Please help is there a number i can talk to someone ?
Adobe Connect Support phone numbers
or
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html -
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop
screen look on
-
need help for my ipod 5th gen it was i cloud issue my cousin forgot her apple id and password ihave prof that we own these ipad because we have the receipt and its full package any one know how to reset the ipod so we can use it again??warranty is expired
Recover the ID and then the password by:
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
Last, contact iTunes by:
Apple - Support - iTunes - Contact Us
or make an appointment at the Genius Bar of an Apple store. Bring your proof of purchase
Apple Retail Store - Genius Bar -
This is a second try to get help. I need help to uninstall and reinstall Photoshop cc 2014
Bridge is not working well, I need to reinstall Photoshop cc 2014 . Someone from Communities was suppose to help me.
Hi John,
I used the chat "Creative chat support" this afternoon at around 14:40
and the person, Karthik M , gave me a link to Technical Support. I
guess he could not help me, but he said he understood the issue. With
the link "Help, Adobe Installation problems", I will follow the
instructions to clean ps cc2014 with CCleaner and reinstall the app.
It looks quite complicated but I will give it a try and hopefully succeed.
You have to understand when reading my previous messages, the issue is
no longer "Retreiving Photoshop CC" but reinstalling Phoshop 2014 to try
to repair Bridge.
Thanks for caring,
Suzanne Lanthier
Le 2014-08-13 15:50, John T Smith a écrit :
>
This is a second try to get help. I need help to uninstall and
reinstall Photoshop cc 2014
created by John T Smith <https://forums.adobe.com/people/JohnTSmith>
in /Adobe Creative Cloud/ - View the full discussion
<https://forums.adobe.com/message/6637788#6637788>
Maybe you are looking for
-
Everytime I start up my computer I get a pop-up that states: 'Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll' My computer and printer work fine but this message is annoying. I can't figure out what the problem is. I
-
im just trying to update my daughters ipod and now its not being detected by itunes when i try to hook it up after the update it said restoing itunes the it showed the icon to hook up to itunes so when i did nothing no ipod detected so i diconectend
-
The resource cannot be found in the classpath
Hi All, I have a Java class and a PDF file in the same folder But the PDF file is not accessible by ClassLoader.getResource(), it returns null. What should I change to access the PDF file from within the Java class by ClassLoader#getResource() ? Any
-
Premiere CC presets missing and Can't Open Sequence error
I'm having a couple problems with Premiere. I was working on a project that's been just fine for a while, but now when I try to open it, Premiere gives the error: "This project contained a sequence that could not be opened. No sequence preview preset
-
Hi, The Security team has requested that they look over our router and switch configs before we deploy them in production. One thing they mentioned: "Bad Error Message Protection" They recommend "setting icmp ignore bogus error responses to 1". I ha