I need help getting started.....with getting started!

I attempted to re-install Photoshop CS3 into a new computer. Everything went well until the end of the installation and I got a box with 2 large red "X's" and the following two comments:
                  Adobe Photoshop CS3
                        Component Install failed
                 Shared Components
                        Component Install Failed
Anyone know why this might be happening and how I might remedy it?

Installation and Licensing Problems
For anything beyon that you will have to provide a lot more information, beginning with some system info...
Mylenium

Similar Messages

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

How can I get a stripped screw out of the bottom of my iPhone?? I need help, How can I get a stripped screw out of the bottom of my iPhone?? I need help

How can I get a stripped screw out of the bottom of my iPhone?? I need help, How can I get a stripped screw out of the bottom of my iPhone?? I need help

Try asking at ifixit.com. The iPhone is not considered user servicable. You're not going to get much help on an Apple sponsored forum.

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so it goes to Default. thanks

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks

Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.

Need help how do I get rid of a exe warning upon start up on my pc from apple

I get this warning upon start up on my pc of course it was after I updated apple Itunes please help it reads
The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link librarySQLite3.dill.

On your PC, open up Computer and navigate to C:\Program Files\Common Files\Apple\Apple Application Support. Inside of this folder should be a file called SQLite3.dll. Copy this file by right->clicking on it and choosing Copy.
Then go back one folder so that you are again in the Apple folder. Look for the Mobile Device Support folder. Open it up and paste the file inside of it.
B-rock

Need help from Jeff in getting CC desktop application

Jeff, I was unable to find my previous question to you from the other day. To start over, my CC desktop application is gone missing after 10 months of CC usage. I need to download a LR update so I can use my camera with raw files. How can I get this back? Apparently Adobe doesn't allow reinstalling of individual programs even though I actually own LR. Please redirect me accordingly. I need help. I have win 7 64.
GeneC

Genec2 locking this discussion and will respond in CC desktop app icon missing.

Need Help as a First Time Starter

Dear Sir
I am trying to create a form in Live Cycle and this is my first time
The issue are
I have 2 fields Quantity and UnitPrice - I want to multiply both and get in the result in the Column Amount and is a normal integar fashion or a currency of my choice.
In case of either Quanity or UnitPrice missing the Amount should be left blank and the Quanity and UnitPrice should show as a Null value even the 0 should not be displayed, In case a person does not fill the quanity figure the form is not complete.
In another field suppose i choose a item from a drop down list, i want to generate auto number starting with a particular series like K001 or FNB001 or HK001 in the codes column which is totally seperate.
If you need to see the form i can send the same to any email, please advise this will be very helpful
rgds
anshul

Dear Bikhu
Thanks for helping however since its my first time and I don’t know where to enter this script and I want to ensure to use it again and again here is form for you to see.
The issues I want sorted ARE
1. Qty and Approx Unit Price to be multiplied to get the Amount.
2. Currency for Approx Unit Price should be as a choice like uSD, EURO, Rs, and The Amount should come in the same manner
3. When some one chooses a Department like Kitchen the Code No should come as K001, K002 etc in case of Housekeeping it should be HK001 and so on. How do we do so.?
4. I want a choice to submit the form by email to various people for approval, like GM or HOD etc
Please teach me how to do this so I can start to create other forms as well
Rgds
Anshul Bhargava • Director Purchase
Country Inn & Suites By Carlson, Jaipur
p: +91 (141) 403-3300 f: +91 (141) 403-3333
c: + 91 98285-00999 e: [email protected]
MI Road, Khasa Kothi Circle, Jaipur, Rajasthan 302001
Countryinns.com/(www.countryinns.com/jaipurin)
Find Us Online:
Facebook twitter Blog

Need help please!im getting confused!

Hi,im trying to create a simple prog that would give me lollipops (10p) and doughnuts(20p) enough to spend 1 pound (100p) in random order using math.random and methods...Im getting very confused with
the combination of these and my code according to the book seems fine,but im getting an error of <identifier> expected at the "private double myMoney" line and ')' expected at the same line...
Here's the code:
import java.awt.*;
import java.applet.Applet;
public class Lollipop2 extends Applet {
          private double myMoney (MoneyGiven){
          int MoneyGiven = 100;
          int MoneyPaid = (int)(Math.random() * 2) + 1;
     return MoneyPaid; }
public void paint(Graphics g) {
     if (MoneyPaid = 1 || MoneyGiven = 10 && MoneyGiven >0){
drawLollipop(g, 10, 10, 30, 60);
g.drawString("10p", xPos, yPos);
     MoneyGiven -= 10;}
if (MoneyPaid = 2 && MoneyGiven >0){
drawRing(g, Color.magenta,40,40,30,12);
g.drawString("20p", topX, topY);
     MoneyGiven -= 20;}
private void drawLollipop(Graphics gIn, int xPos, int yPos, int width, int height){
gIn.drawRect(xPos, yPos, width, height);
gIn.drawRect(xPos+width/2, yPos+height, 4,15);
private void drawRing(Graphics gIn, Color ringColor, int topX, int topY, int diameter, int thickness){
gIn.setColor(ringColor);
gIn.fillOval(topX,topY, diameter, diameter);
gIn.setColor(Color.white);
gIn.fillOval(topX+thickness,topY+thickness, diameter-2*thickness, diameter-2*thickness);
gIn.setColor(Color.black);
Can someone please help me???

Im getting very confused with
the combination of these and my code according to the
book seems fine,Nope, your code is not according to the book, starting by the name conventions, your variables should start with lowercase and each word inside the var name should start with uper case and your brackets use is disturbing, the closing brackets should be on its own line.
Besides that:
import java.awt.*;
import java.applet.Applet;
public class Lollipop2 extends Applet {
private double myMoney (/* here you should havae the type of money given, like: int, long, float, double, BigDecimal, etc. */MoneyGiven){
int MoneyGiven = 100; /* here you are reusing the parameter name as a local variable. */
int MoneyPaid = (int)(Math.random() * 2) + 1;
return MoneyPaid; } /* Your method signature is double but you return int, it may give you a warning. */
public void paint(Graphics g) {
/* Bellow in the condition:
   * 1 - there is no MoneyPaid or MoneyGiven vars anywhere to code to use.
   * 2 - You are using attribution(=) to the variable instead of comparation (==)
if (MoneyPaid = 1 || MoneyGiven = 10 && MoneyGiven
0){drawLollipop(g, 10, 10, 30, 60);
g.drawString("10p", xPos, yPos);
MoneyGiven -= 10;}
if (MoneyPaid = 2 && MoneyGiven >0){
drawRing(g, Color.magenta,40,40,30,12);
g.drawString("20p", topX, topY);
MoneyGiven -= 20;}
private void drawLollipop(Graphics gIn, int xPos, int
yPos, int width, int height){
gIn.drawRect(xPos, yPos, width, height);
gIn.drawRect(xPos+width/2, yPos+height, 4,15);
private void drawRing(Graphics gIn, Color ringColor,
int topX, int topY, int diameter, int thickness){
gIn.setColor(ringColor);
gIn.fillOval(topX,topY, diameter, diameter);
gIn.setColor(Color.white);
gIn.fillOval(topX+thickness,topY+thickness,
diameter-2*thickness, diameter-2*thickness);
gIn.setColor(Color.black);

Need help iNSTALLING cr2008..GET "FAILED TO REGISTER" ERRORS

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

I would suggest making sure your machine is clean. Contact support for the steps to fully uninstall CR. For example, here are notes to uninstall previous versions of CR:
1218535 - How to manually uninstall Crystal Reports XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333533333335%7D.do
1216945 - How to manually uninstall Crystal Reports 10
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343335%7D.do
1216947 - How to manually uninstall Crystal Reports 9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343337%7D.do

HT204382 music files that I'm trying to transfer from my external hard drive!!! i really need help! i am getting very frustrated. plz help me thank you

hi. i am trying to transfer my old pictures and music files from my external drive into my new laptop.and first of all only a coupleof my foldersare coming up.and even those few files/folders wont play ....i am new to mac.i REALLY need help. my old pictures and music are real important to me.plz help me.

IS the external HD from another Mac or a PC?

NEED HELP IN MATRIX WITH GROUP REPORT

Dear All,
I need small help in MATRIX WITH GROUP REPORT In Report Builder Test Report
In my report, having periods as rows and location as columns as shown below,
1) LOC-A
JAN-10 FEB-10
ITEM-GROUP -1 1 2
ITEM-GROUP-2 3 4
ITEM-GROUP 3 5 6
2) LOC- B
MAR-10 APR-10
ITEM-GROUP -1 7 8
ITEM-GROUP-2 9 10
ITEM-GROUP-3 11 12
But comming to my requirement, the periods should be in fix in matrix as shown below
1) JAN-10 FEB-10 MAR-10 APR-10
LOC-A
ITEM-GROUP -1 1 2
ITEM-GROUP-2 3 4
ITEM-GROUP 3 5 6
LOC- B
ITEM-GROUP -1 0 0 7 8
ITEM-GROUP-2 0 0 9 10
ITEM-GROUP-3 0 0 11 12
I am unable to get this kind of output format
Please kindly waiting for reply from our team....
Regards
krishna.P

For the periods, create a seperate dummy query and then use it as column group in the multi query matrix.

Need help integrating flash with asp

i am creating a dynamic site that pulls all of its content
from and access database. i would like to make the entire page in
flash. i have never used flash to pull any content from a datbase
before. does any one know how to do this ? or know of a good
tutorial? i can only seem to find tutorials for flash 8 or flash 5,
nothing for mx2004.
it seems like every thing i try doesnt work and no one knows
how to help me.
feeling very discouraged,
-furley

Flash has nothing to do with getting data from an Access
database.
You need to focus on either ASP or ASP.Net, a scripting
language for the
server script either JScript or VBScript, middleware usually
ADO or ADO.Net
and finally SQL. All of these items go together in a server
side script that
could work with non-Flash or Flash client interfaces. You
should find many
tutorials on the internet with these items as it has been
done for nearly a
decade.
You also can use ColdFusion.
For Flash, you need to learn LoadVars Actionscript class if
you plan to
communicate data in the URL Variables format or XML
Actionscript class if
you want to use XML data format. It will not really matter to
Flash what is
on the server side as it will only be sending and receiving
data in either
of those two data formats (URL Variables or XML).
If you want to look at some Using VBScript, ASP, ADO and an
OLEDB Connection
examples I use for seminars in Web database you can take a
look here:
http://www.hosfordusa.com/ClickSystems/courses/webdb/.
However they lack
Flash example but would work "as is" with a Flash example.
Once you look at some of those options, you can then form
more specific
questions for this forum and especially with using the
LoadVars and XML
Actionscript classes or the XML connector Flash component.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"professorfurley" <[email protected]> wrote
in message
news:[email protected]...
i am creating a dynamic site that pulls all of its content
from and access
database. i would like to make the entire page in flash. i
have never used
flash to pull any content from a datbase before. does any one
know how to do
this ? or know of a good tutorial? i can only seem to find
tutorials for
flash
8 or flash 5, nothing for mx2004.
it seems like every thing i try doesnt work and no one knows
how to help
me.
feeling very discouraged,
-furley

I tried starting with the Start Page, don't like now can't stop it even unchecking the option box and deleting the location

Wanted to see if I liked starting on the Start Page, but just an unnecessary step prefer starting in the folders already. So unchecked the box in the tools/options but it still opens on the Start Page. How can I get it to stop? I even deleted the page location link and it still opens on the Start Page.

OK it's not the "Start Page" it's the home page for the first email account. I prefer it open to the last folder when last closed.

Need help Pagination Suppourt with DataGrid

Hi ,
When i do a search Operation , the data from Database is huge and i think if i display all of them at a Time it will be a performance and response Time issue .
So the question i am asking is that , can any body please give me a basic idea as how to implement Pagination with DataGrid Results ??
Need help with Datgrid and Pagination suppourt .
Thnaks in advnace .

Hi Kiran,
Try referring to the below link...
http://www.flexicious.com/
Thanks,
Bhasker Chari.S

Replaced hard drive in compaq presario cq62, need help recovering it with out disks

Recently replaced the hard drive in my notebook due to failure of original. Need help recovering it without disks

If you are wanting to install the original copy of Windows it came with, you will need a set of recovery disks.
Otherwise, you can purchase a copy of Windows to install and download the appropriate drivers from http://goo.gl/hOm3. Just make sure the copy of Windows that is installed is at least the same family of Windows to ensure that drivers are available.
What is the exact model of the notebook and product number?
NOTE: Do not provide the serial number.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Need help from somebody with the "MSI KT6 Delta-FIS2R" motherboard

Hi everybody!
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard (the one with onboard LAN, Audio, RAID, S-ATA and IEEE1394 firewire). You see. I've got this board myself but it's been destroyd. Some values for the onboard devices in my board has been overwritten so that windows no longer recognizes the onboard LAN and Audio controller anymore. I really need some help from somebody with this board.
I need to see what the values for the onboard devices should be. I hope someone can help me by sending me a repport from the Everest home edition: http://www.lavalys.com/products/overview.php?pid=1&lang=en
If anyone could do me this favour, I would be VERRY thankfull

Quote from: HYSTERIAH on 12-November-05, 06:24:20
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard
HYSTERIAH,
With 76 Replies and 277 Views on your original thread, it looks to me like people have been trying to help you.
So there is no confusion, I am locking this thread so all your help and advice you receive will be in the same place, so people do not need to jump between threads to keep track of what has already been suggested for this mobo of yours.
Richard

I need help getting started.....with getting started!

Similar Messages

Maybe you are looking for