I need help getting the kde default cursor in openbox

I know how to install the kde cursor but I do not no what it is called in archlinux. Can somebody please tell me what it is called

If I understand, you are using openbox but you want the KDE's cursor, without using KDE.
You have the theme but :
- you don't know how to install it ?
- you dont know the name/ the file path of the current cursor to change it by the new one ?
- the two options above are the same thing ?
I found that, but if i didn't understand your problem don't mind.
http://urukrama.wordpress.com/openbox-g … ousethemes

Similar Messages

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

Need help accessing the factory default restore disk - Ideapad b5609

I am working on a friends PC. It will not start up in normal mode but will start in safe mode. This PC has Windows 7 64 bit installed.
I don't know whjat he did to this except I used Malwarebytes to remove some malware. After I removed the malware, the PC would not boot in safe mode, but would get stuck at classpnp.sys. I searched for a solution for this and the only thing I could get to work was renaming classpnp.sys to classpnp.old. This allowed the PC to boot in safe mode again but this needs to get fixed.
What I wanted to do was access the factory default restore disk, back it up to USB ( No dvd's) if possible and reinstall a fresh copy of the system. - But I don't even know if this laptop has a factory restore disk, Is there one?
The PC owner says he didn't get a dvd when he bought the PC. This person was born without arms and is not too PC literate. He uses the PC for e-mail and going to porn sites. It's possible he did have a dvd for the PC if it came with one but he just doesn't remember or even knew what it is.
I do see a Backup and Repair app in the start menu / Maintenence folder but It doesn't start from safe mode. One Key Recovery doesn't work either.. I don't know what it does but I was going to look at it to see if it will help fix the PC.
I tried a windows system recovery disk, and it says it cannot fix the problem. My friend told me this PC is over a year old so i assume it's out of warrenty.
Please help, Thank you.
Moderator Note; similar threads merged

I've already removed the malware with malwarebytes and double checked this with the offline version of Defender. The PC is over a year old.. the owner tells me it's not in warrenty. I didn't want to mess up the hidden recovery partition so i installed a fresh copy of windows 7 to C drive. Since I can now boot into C i will try to install and use OneKey recovery to access and reinstall from the hidden partition.
I understand there is an Enginers version of Onekey Recovery I may have to get if i have problems - it's the version of OKR that the OEM's use to set up the partition in the first place.. from my info anyway..
This is the second time tryiong to fix it from a fresh install on C drive. The first time had a Windows.old folder I wanted to try to reinstall stuff from, but on trying to back that up to a external hard drive via USB, the system crashed and said missing master boot record. A StartUp Repair disk ran 6 times could not fix the problem ( same disk I used to install.. told me it didn't find any problems !
Other odd behavior.. when i was copying the windows.old folder, it didn't tell me i had so many files to go.. always sais it had 0 files left to transfer.
I couldn't get the sound drivers to work even after downloading the right ones from lenovo. I even let device manager try to reinstall the drivers from the Realtek folder in the windows.old folder - those should have worked - and the pc told me that the drivers matches and were up to date - however, the error i get told me there is a problem with the drivers and installation would fail when i tried to install from the downloaded exe.
I have been fixing my own systems for over 20 years, i have never seen a system as screwy as this with a fresh install.

Need help getting the wireless driver for my x120e.

This has been the most difficult thing ever. I have literally tried all of the wireless LAN and WAN drivers under all 4 of the x120e driver options. Which is odd because there are 4 options for the x120e when you search for it. As shown here: (http://i.imgur.com/4K9sB.png). I would love some help in getting the correct driver. Any and all help is appreciated, let me know if there is any other information needed.
Solved!
Go to Solution.

no worries.
you mentioned that you have tried a number of driver packs, to no avail.
can you confirm if you've tried this: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012809
ThinkPad 2x2 11a/b/g/n Wireless LAN PCI Express Half Mini Card Adapter for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) and XP
found in the X120e driver matrix, here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT072377
cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead. I need help getting the old effects back.

For background: I lost my v6 because I had to reformat my whole hard drive. When I reformatted I lost GB and everything else I had. I downloaded GB (unaware of the awfulness that is v10) from the App Store. The fact that v10 does not have all my favorite and most used effects from v6, I uninstalled v10 and redownloaded v6 from my App Store Purchases. I load up v6 only to find that all the default effects are there for each instrument, but when I go to add an effect (i.e. Distortion, Vocal Transformer, Flanger, etc.), instead of the list of classic effects, there's the list of awful AU effects from v10. What gives?!

I uninstalled v10 and redownloaded v6 from my App Store Purchases. I load up v6 only to find that all the default effects are there for each instrument, but when I go to add an effect (i.e. Distortion, Vocal Transformer, Flanger, etc.), instead of the list of classic effects, there's the list of awful AU effects from v10. What gives?!
For me, the "Edit" panel in GB6.0.5 looks like this:
Are you saying, that the upper part with "GarageBand Effects" is missing?
Then check, what is installed in your System Library in the folder
/Library/Application Support/GarageBand/Instrument Library/
(the topmost "Library" folder on your Hard Drive.
You may need to restore the old GarageBand effects and Track settings files from your backup:
i.e look into the folder /Library/Application Support/GarageBand/Instrument Library/Plug-In Settings/
and restore the settings for Chorus, Flanger, Vocal Transformer, Tremolo, whatever effects you are missing.
And also look for missing files in "Track Settings" folder and "Sampler" folder.
What kind of backup do you have? If you have a Time MAchine backup, go back in time to the time before you upgraded to GB 10.
Regards
Léonie

Need help getting the powerbook to see the hard drives

I have been working on the Powerbook G4 17 inch. I am trying to reinstall the Mac OS 10.4 but when I get to the screen where I have to select a disk none show up. I have tied going in to disk utility and formating the drive but I get error codes. I them tried to reset the PRAM and it did not work. Now the mouse pad is not working and I can't get the start up disk to work.

well I did not write it down but the hard drive has dismounted and now when I hold down the option key during start up it does not show the drives. It will however show the install disk. Now when I try to boot the disk it will not boot. The only thing I can think of is the original install disk needs to be out in the computer. The owner does not have one and I own MacBook's.

Need help getting the digits without the decimal

I have a number such as 6711.00425532 , how can I get the 6711 without rounding this number up or down. In another words, I don't care with any number after the period, all I need is whatever the number before the period, as is.
If the number is 23.02345, I need to get just the 23
If the number is 344.985430, I need just the 344
Is this possible?

BYJ_wntrsnt wrote:
I have a number such as 6711.00425532 , how can I get the 6711 without rounding this number up or down. In another words, I don't care with any number after the period, all I need is whatever the number before the period, as is.
If the number is 23.02345, I need to get just the 23
If the number is 344.985430, I need just the 344
Is this possible?
Fix it.
<cfoutput>
fix(6711.00425532): #fix(6711.00425532)# 
fix(23.02345): #fix(23.02345)# 
fix(344.985430): #fix(344.985430)# 
fix(-6711.00425532): #fix(-6711.00425532)# 
fix(-23.02345): #fix(-23.02345)# 
fix(-344.985430): #fix(-344.985430)# 
</cfoutput>

Need help getting the syntax.

Hi All,
Greetings !!!!!!!!!!
While using the following syntax not getting the output required...
1) <?xdoxslt:set_variable($_XDOCTX, 'v_l',xdofx:(nvl(V_COUNT,0)+nvl(V_COUNT1,0)+nvl(V_COUNT2,0)+nvl(V_COUNT3,0)+2)?>
2) <?xdofx: xdoxslt:set_variable($_XDOCTX, 'v_l',(nvl(V_COUNT,0)+nvl(V_COUNT1,0)+nvl(V_COUNT2,0)+nvl(V_COUNT3,0)+2)?>
tried both the syntax but not getting the output.....
Please let me know your valuable advices how it can be used.
Thanks
Rajesh

Hi kwin,
Thanks for your reply...
V_COUNT, V_COUNT1, V_COUNT2, V_COUNT3 are present in data xml. but in different groups..for some parameters V_COUNT or V_COUNT1 will not be present in data file..
so we will get null value for those...so when i add (V_COUNT+ V_COUNT1+ V_COUNT2+ V_COUNT3) i am getting value as NaN...so i used nvl function it worked fine..but this sum value need to be stored in in a variable..
Hope you understand...
Thanks
Rajesh

HT201365 i lost my ipod5 and cant remember the serial number i need help getting the serial number on my ipod 5

i lost my ipod 5 and i cant remember my serial number i need help with my serial number

Finding serial number for a device - https://discussions.apple.com/message/18246553 - from box or backup file, not from Apple.
http://support.apple.com/kb/HT2526 - If you registered a device you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
My Support Profile - https://supportprofile.apple.com/MySupportProfile.do
Maybe a way to find serial number after a device is no longer in your possession - https://discussions.apple.com/message/19524469 - "The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices."
iPhone: Locating the serial number, IMEI, ICCID, or MEID - http://support.apple.com/kb/HT1267 - from phone itself, a computer to which it has been backed up, or packaging.

Need help get the sound timed to the picture

Photoshop elements 12. On a PC. How do you get the sound to time with the picture when you are trying to edit it?

That makes more sense. I wish could help specifically, but I use another NLE video application.
Was the audio recorded separately or at the same time as the video? If the latter, I'm pretty sure Premiere should lock the audio event with the video as you move it. (At least most NLEs do.)

I need help getting the software updates

i was constantly disconnecting from the internet when playing online games on the mac side of my hard drive until i got a software update, but i dont think the update carried over to my windows xp partition, so i still frequently disconnect when playing games on windows, anybody know what the problem is or how i can get the software updates on the windows side?

i dont think the update carried over to my windows xp partition
Of course it didn't. Mac updates don't affect windows, and vice versa.

Need help getting the data from my old address book

Can someone tell me what file I need to copy and where to restore all my addresses from my old address book. I elected not to migrate everything to avoid problems, but that is one important and long list.
Any help will be greatly appreciated
Mireille

Look in the folder ~/Library/Application Support/AddressBook/ for the files containing your data, where ~ is the item in the Finder's sidebar with the house icon.
(25514)

DUH! I need help getting the browser setup on BB 8130 Pearl

Just got it yesterday, have mastered calendar address book and email....
but I CANNOT figure out how/where to enter a web address to get started.
I do have Verizon's VZ Access Manager..But no ability to do it on the handheld that I can find....HELP!
Solved!
Go to Solution.

When you go into the browser, hit the menu button, and choose Go To. Should allow you type in a web address
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

TS5249 After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead. I need help getting the old effects back.

After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead.
For background: I lost my v6 because I had to reformat my whole hard drive. When I reformatted I lost GB and everything else I had. I downloaded GB (unaware of the awfulness that is v10) from the App Store. The fact that v10 does not have all my favorite and most used effects from v6, I uninstalled v10 and redownloaded v6 from my App Store Purchases. I load up v6 only to find that all the default effects are there for each instrument, but when I go to add an effect (i.e. Distortion, Vocal Transformer, Flanger, etc.), instead of the list of classic effects, there's the list of awful AU effects from v10. What gives?!

I don’t have this issue, but I am looking to learn about which parts of the old GarageBand can safely migrate to the new GarageBand 10.
(Personally, I like most of what changed in the new version. I sorely miss a few features, and I submitted some detailed feedback. If you think similarly—or if you hate the new version like babygotbackup—do the GarageBand community a favor, and send in your own feedback! From the menu, select GarageBand ▶︎ Provide GarageBand Feedback.)

Wrong Songs on iTunes need help getting the correct ones.

I just purchased the album "The Ever Popular Tortured Artist Effect" by Todd Rundgren and two of the songs are different from the title of that iTunes has in the store. They are "Drive" which is playing as "Bang the Drum All Day" and "Hidawy" which is actually "Compasion" that is from a different album from the same artist. If you preview it on the iTunes store it is this way also. How can I get this corrected and either get a credit or the correct song?

The mac version of Premiere will not export as .wmv so I chose the only setting that would allow me said custom resolution and I intended to just convert the file once it was set.
The original source was .jpeg's and a .m4v video

I need help getting the kde default cursor in openbox

Similar Messages

Maybe you are looking for