I NEED HELP!!!! I can't get the quicktime in my computer
Hi I've been trying so many things, first I uninstalled the itunes and quicktime programs and downloaded again, but it kept showing an error 2093 or something like that. Today I tried again and I fallowed some steps, like downloading the windows install clean up and nothing worked, I'm so frustrated cause I got an Ipod for mother's day and I can't do anything until I fix the quicktime and itunes. Is anyone knows what else can I do I will be so HAPPY Thanks
HP Pavilion 754n Windows XP
I have been working on this for a month...we just got a new Dell and I couldn't get Itunes to install because of quicktime...I tried everything that was listed on the discussion boards including deleting things in the registry but this morning I went to oldapps.com link below and downloaded quicktime 7.01...the newer versions wouldn't work for me...and that did it...I lost my entire library but luckily I had a backup copy...I hope this works.
http://www.oldapps.com/download.php?oldappsid=quicktimeplayer71.exe
Windows XP Pro
Similar Messages
-
How can I get a stripped screw out of the bottom of my iPhone?? I need help, How can I get a stripped screw out of the bottom of my iPhone?? I need help
Try asking at ifixit.com. The iPhone is not considered user servicable. You're not going to get much help on an Apple sponsored forum.
-
i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??
See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Hi, I downloaded a TV series straight onto my iPad, I now want to delete the series off my iPad but I can't get the series onto my computer. It has the name of the series but no episodes. Help!
How are you trying to copy them over ? You should be able to copy them over to the TV Shows section of your computer's iTunes via File > Devices > Transfer Purchases
-
I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?
A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
Help, I can't get the Embedded OC4J Server to restart!
I've run into the following problem (well, actually a collegue) in that I can not get the OC4J application to restart once I kill it. She has a JSP page which will run once upon the first time JDeveloper 9i is run. However, from that point on, changes are compiled, but the I.E. page never comes up. I traced the problem down to the OC4J internal server is not being restarted. It seems the underlying reason is that somehow the embedded server gets in a state where it can't be shutdown.
I've tried directly killing it via the run manager tab, and I've even looked at task manager and in both cases, I don't see anything corresponding to the server. Even restarting JDeveloper proper doesn't seem to clear it.
Any thoughts?
Thanks.
Please post here, and email me at [email protected]
Dave BlakeI assume you are asking about JDev 9.0.2. If it's another version, please let me know. I can offer some suggestions based on the most likely causes:
1) Try disabling the proxy server in JDev. Go to Tools | Preferences - Proxy Server, and uncheck the "Use HTTP Proxy Server" checkbox. You will have to quit and relaunch JDev for the change to get picked up. Then try running your JSP again.
2) Try telling JDev to use a specific hostname for your machine other than the default. Go to Tools | Preferences - Deployment, and click on the radio button that says "Specify host name:" Try putting localhost or 127.0.0.1 here. You may have to use this in combination with 1).
The embedded OC4J proces will show up in the Windows task manager as a javaw.exe process. You shouldn't have any zombie OC4J processes, but if you do end up with them and have a reproducible case, please post the steps-to-reproduce here. -
Need help with Expressions to get the sum of rows between dates
Date Total
8/06/2010 $2000
8/10/2010 $5000
8/28/2010 $2500
9/10/2010 $5000
9/16/2010 $2000
9/25/2010 $7000
9/28/2010 $2500
I need sum of rows based on month. I have tried following syntax. It did not work, which is returning $0. Appreciate any help i get.
=sum(iif(Date.value>="8/01/2010" AND Date.value<="8/30/2010",Total.value,0))Hi RG K,
According to your description, you want to calculate sum of total based on month use expression, but the expression does not work. If that is the case, please refer to the following steps:
In design surface, right-click Insert and click Text Box.
Right-click inside of the text box, then click expression.
In Expression text box, type the expression like below:
=sum(iif(Fields!Date.Value>="8/01/2010" AND Fields!Date.Value<="8/30/2010",Fields!total.Value,CDec(0)))
In this expression, the data type of total is Decimal, so we need to convert 0 to Decimal use CDec() function. If data type of total is Double, we need to use CDbl() function.
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Plz Help, How can I get the Information from the net conneted machine?
Suppose Person x has login on the network by using
dial-up network connection? I want to know that wheather he is on the network and get the data from his machine ?
Suppose I know his username/Password and phone no
for dial up...
Plz, suggest me how can I do this?
How can get information from that machine?
Thanks
PramodHi,
I dont know whether I understood your question completely.Anyway,let the users be X and Y and be on diff machines,
Since X is logging in using a dialup network the ip is allotted dynamically and so, Y cannot know X's ip till he logs in and tell Y about it explicitly. Workaround is that either X's or Y's ip must be constant/static or there should be another way that X know about the ip of Y each time he logs in.
If X's ip is static, Y can poll certain port at X where u's alpplication is running and if conn. is succ, after some authentication, get the information u want. For writing u'r own services there should be u'r own components at both ends, one requesting connection and other accepting. Please get back to me if more doubts or if I have'nt understood u'r problem fully..
regards Stallon -
I have a late 2008 MacBook and have burning some CD's. It has been working just fine. I tried to insert the last CD and can not insert it. it acts like it is locked or blocked. how can I get it to work again? I have tried restarting it several times, tried restarting it while holding done the esc key and the pad key. Nothing has worked so far.
Any clues other than taking it in???Try pressing the Eject key on your keyboard.
-
I can't get the music from my computer onto my ipod
Okay well I have a newish computer and i recently downladed a few songs from itunes on my computer. The thing is, it won't transfer the songs onto my ipod. Online it looks like it's doing so but ig i look under what's on the device or just go look at my music on the ipod, they don't shpw up. I have like 6 songs I really want to transfer and when I called apple asking for help they sent me instructions that didn't end up helping me at all. I'm at a loss for wat to do. I tried backing up the files on my computer and syncing the ipod to the computer multiple times. I've also manually tried selecting and moving over the songs and it just won't.
Any thoughts on what to do or why they won't move over? ThanksWhat exactly happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
Last
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
How can i convert this into Canadain iTunes to redeem from the card? Is that possible?
You cannot.
Itunes cards are country specific.
Sell the card to someone in the U.S, then buy one in Canada. -
My iphone 5 sleep button doesnt work properly. Need help where can i get it fixed
I bought my i5 in january from croma, delhi and last 5-6 days i am noticing that my sleep button is not working properly on the right side. I searched for solution on the net but all i got to know that this is a problem in iphone 5 and need to be replaced. And i have no idea how to get it fixed or where to contact to get it replaced. Need urgent help.
Thanx in advancemodular747 wrote:
It means that for one year from the data of purchase, Apple will replace the phone with a refubished unit for any malfunction not due to abuse or physical damage (i.e dropping, exposure to water, etc,)
To be clear, it's a new or refurbished unit, whichever Apple has in the replacement phone stream. -
PLEASE help, I can't get the sound on the videos on my iPod to work!
I converted them and everything because they werent in the proper format, but now when I try to play them on my iPod there's a fine picture but no sound! Somebody please help me!
Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
Search this forum for recommendations, but beware of spammers trying to sell you their own product. -
Ask for help: I can not get the HelloWorld example done.
Hi,
I followed this tutorial to start my first BPEL project using Oracle BPEL Process Manager 2.2, which is based on Eclipse SDK Version: 3.5.1:
http://www.oracle.com/technology/obe/obe_as_1012/integration/bpel/1st_bpel_prj/1st_bpel_prj.htm
However, it does not work. When I tried to build it, following error occurred:
Buildfile: C:\product\10.1.3.1\OraBPEL_1\bpel\workspace\HelloWorld\build.xml
main:
*[bpelc] BPEL validation failed.*
*[bpelc] BPEL source validation failed, the errors are:*
*[bpelc]*
*[bpelc] [Error ORABPEL-10071]: unresolved xpath function*
*[bpelc] [Description]: in line 36 of "C:\product\10.1.3.1\OraBPEL_1\bpel\workspace\HelloWorld\HelloWorld.bpel", could not resolve xpath function "",*
because function "bpws:getVariableData" not registered.
*[bpelc] [Potential fix]: please make sure to register this function in xpath-functions.xml file located under domain config directory and make sure that*
function prefix is mapped to correct namespace in <process> activity.
*[bpelc] .*
BUILD FAILED
C:\product\10.1.3.1\OraBPEL_1\bpel\workspace\HelloWorld\build.xml:28: Validation error
Total time: 140 milliseconds
I searched and found many solutions in this forum, but none of them works. Would anybody help, PLZ? Millions of thanks!And the other problem is that you didn't fix the problem from your last thread correctly.
This is wrong.
OBT.find( findString);
System.out.println("Searching for " + findString[i] +":" + OBT.isEmpty());Just do this already.System.out.println("Searching for " + findString[i] +":" + OBT.find( findString[i])); -
I can login into my apple id but I it keeps saying my apple is security questions my answers are wrong but I put in what I wrote down in my book
Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
(89170)
Maybe you are looking for
-
Linking to specific spry tabbed panel - code not working
Hi, I have followed the tutorial at http://foundationphp.com/tutorials/spry_url_utils.php with regard to being able to link to a specific tab. For some reason though, my code doesn't work. I am usign Dreamweaver cs3, and as soon as I head back to the
-
How will Numbers recognize number with plus and exponential sign in it?
For example, I have data in number such as "+1E9" which stands for 1 billion. But Numbers does not recognize it as a number. What can I do to use these as numbers?
-
Blur control disabled for Drop Shadow Effect and Filter
Win2k Pro 2GB Ram AICS 11.0.0 This is odd: the blur control in the Drop Shadow Effect and Filter dialog boxes is disabled. It seems to me there was a time it was ENabled. This is the situation for both vector and bitmap objects. I've played with Docu
-
CC 2014 Ruler tool Straighten button is dimmed in layered files (Mac and Win versions)
I have a Grayscale/8 bpc file with a Levels Adjustment layer. In CC 2014 I use the ruler tool to drag out a line and the notice the Straighten button in the Options bar is dimmed whether I have the Background layer or the adjustment layer selected. I
-
How can I get an album to play songs consecutively? They just repeat and I cant find a way to change it.