I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

Restore iPhone with iTunes on your computer.

Similar Messages

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • I recently purcased a Roku which I connected via WiFi.  Was unhappy with it so disconnected all.  Since that time my Ipad will not connect to the internet.  Any suggestions?

    I recently purchased a Roku which I connected via WiFi.  I was unhappy with it so disconnected everything.  Since that time my iPad 1 will not connect to internet although in "settings" it indicated that it is connected.  I turned off the WiFi for 30 seconds as was suggested but still the iPad won't conect.  Anybody have suggestions as to what might provide a "fix"? 

    I wonder if the roku changed some other settings in your router or pad.
    Recycle the router.  Thurn it off for a while, then restart.
    On the pad, forget your exiting network.  This will cause it to search for avaialbe, and reset again.  You will likely need to redo any password/ security entry.
    Lastly, in settings, general, reset network connections.  You will not lose anything.

  • Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

    Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have a few songs that I purchased that either will not play or play for a minute and quit.  None of the suggestions in the Help section apply to me.  What do I need to do?

    I have a few songs that I purchased that either will not play or play for a minute and quit.  None of the suggestions in the Help section apply to my problem.  What do I need to do?

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please try to remove all program rules for firefox in your firewall and let it detect the program again: [[Fix problems connecting to websites after updating Firefox]]

  • My google map that was on my website now has been replaced with a sign that says (mobileme is colsed).  I have tried to delete this and reinstall google maps, but the same thing appears. Can anyone help?

    My google map that was on my website now has been replaced with a sign that says (mobileme is colsed).  I have tried to delete this and reinstall google maps, but the same thing appears. Can anyone help?

    See this page for info about Google maps...
    http://www.iwebformusicians.com/iweb-snippets/map-tutorial.html
    ... how to get the code and paste it into an HTML Snippet.

  • I have an iPhone 4 and it will not turn on. I plug in and says connect to iTunes. I connect it and it won't restore. What can I do? Please help

    I have an iPhone 4 and it will not turn on. I plug in and says connect to iTunes. I connect it and it won't restore. What can I do? Please help

    http://support.apple.com/kb/TS3694#error21
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

    Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • HT1695 My iphone 5 will not stay connected to wifi anywhere. I cant get it to connect at all. What can I do to get this fixed?

    My iphone 5 will not stay connected to wifi anywhere. I cant get it to connect at all. What can I do to get this fixed?

    does this only happen at your home network or with multiple networks?
    have you tried everything here? http://support.apple.com/kb/ts1398

  • My hotmail account will not verify on my iPhone at all and everytime I go on the web to sign in it says page not found

    My hotmail account will not verify on my iPhone at all and everytime I go on the web to sign in it says page not found

    You need to turn off find my ipad in settings
    Then restore to factory settings ipad will then be
    as new then enter you Apple ID and password
    bsydd uk

  • HT203433 Download of song will not complete has been over an hour and I have done all the suggested troubleshooting

                                                                Download of song will not complete has been over an hour and I have done all the troubleshooting suggestions to correct

    Hi Lisa Wozniak,
    Are you on a slow Network Connection? I would recommend you to Clear the browser Cache and History and  then try again or try using a different browser on a different Network Connection.
    Let me know if it works or not.
    Regards,
    Rahul Tyagi

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

    Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
    Thanks, Pat

    I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
    https://discussions.apple.com/message/17589686#17589686

  • Hello, I´m using Lightroom 5 with all updates. If I import photos often I get the information, that some smart-"Vorschauen" could not create. I´m using a MacBook Pro. All other functions are well. What can I do?

    If you need further information, feel free to contact me.

    Hi Andy,
    I'm using Mac OSX 10.7.5 
    No the one with the caps seems to be working normally.This project with the caps now has four files. Originally I created it with about fifteen. I deleted eleven of them and edited the remaining four. The four files each have one version and its original. It wasn't until after I completed this work that I noticed the privious project when opened and scrolled had the entire library in it.
    The test I did went like this. With the problem opened I deleted one file that I new existed prior to this problem.      I than opened that project that I new it was from to see if it got deleted and found it gone and moved to trash. I think that tells me that if I delete all the files in the problem project I'll be in trouble. I also have inported to projects each with one file that I edited. They are working fine. I took a look in the problem project and this last
    two imports show the thumdnails in it.
    Currently on my Hard Drive I have 275 GB free space.  My photo's take up 138 GB. As I said on Dec. 1st I backed up the system using time machine. So all of Dec. and part of Jan. inports won't be on it. I could work around the problem project and move those file to a safe place. I think it best not to back up the system with Time Machine until I'm confident the Aperture is runing properly. I'm happy that I control these system backups manually.
    I'll need to find out how to copy the Aperture library to another place. I'm sure I can poke around and fined out the process.
    Thanks Andy for the come back!

  • HT1212 ive forgotten the passcode on my iphone 4 and ive restored it on itunes but passcode is still on what can i do to get into the phone i resored it without sim in does the sim have to be in the phone

    i havent used my iphone for ages and ive forgot the passcode ive tried to restore it but passcode is still on there does phone need to have sim card in it to restore it?

    if the backup was don when the device had a passcode then it will be there when you restore the backup
    you need to restore to factory settings to get rid of the passcode then

Maybe you are looking for

  • MM PO send by email

    Dear friends, We are needing to send some POs by email with an PDF attached. Does anyone have the steps to generate this pdf ? best regards, Alessandro

  • Because of error 513, no message was created in Support Desk System

    Hello all... Currently setting up Service Desk and when I create a service message in my satellite systems (ECC DEV, QAS, PRD, etc.), I get the error 513 as described in my subject line. I am able to create messages within the Solution Manager enviro

  • Bridge CS4 freezes when I open a folder with avi files

    Whenever I navigate to a folder with avi files, Bridge CS4 freezes. I have tried resetting my preferences, changing the file associations, but it still hangs. Both Windows and Bridge are set up to associate avi files with VLC Media Player. The files

  • PDF export for  columns formatted as HTML

    Hello, I've created a report having some columns formatted as HTML . in the PDF file exported from BI Answers dashboard, HTML tags are shown instead of formatted value. (for example : "div style="width:100%;background-color:#FF3300">89.12%</div" inst

  • ADO Stored Procedures Error message

    I am having trouble using Oracle Stored Procedures with ADO. I keep getting an Run-time 3708 - Parameter object is improperly defined. Any advice welcome. This is my VB Code: Set myCommand = New ADODB.Command With myCommand Set .ActiveConnection = my