I Need Help in BIOS Update!!!

Hey!! i got the 875p Neo LSR motherboard and the BIOS version that i currently have or got with my board was 1.4 and the LIVE Update 3 says the online version is 1.7. There was something to do with Flash BIOS or something and i tried it and my PC would not reboot. So i had to format my HDD and install Windowns again and it did work. That was another pc and i got the same board on my 2nd pc and i downloaded all the appropraite updated BIOS files from the Link given in another Thread on the forum so I was wondering if anyone could guide me through of how to install the new BIOS files, as i downloaded the 1.5, 1.6 and 1.7 ones, since i dont wanna end up with a dead board!! I am a newbie so pls help me out ppl !! Thank alot for ur cooperation!! )

Try these excellent threads:
BIOS Flashing
Live Update WARNING!! Read this first!
BIOS flashing stupid or not?

Similar Messages

Need Help For Bios Update...

Hi Buddies, my mobo (760GM-P23 (FX)) is working with an Athlon II X3 455, Kingston HyperX KHX1333C9D3B1K2/4G Dual Kit and with just on-board graphic. MSI Live Update shows the bios H.20 as my board's and H.A0 as upgrade version. Is this information correct?
I'm an inexperienced pc user. Is there any software which installs the bios update through windows' interface?
I'm using "Core Temp" software as processor heat controller. Any other advice which shows also the mobo's temperature?
Thanks in advance..

Quote from: motan on 22-October-12, 19:58:19
Thanks for help. How do I understand that the mobo needs a bios update?
if you have no issues, then leave bios update alone
Quote from: motan on 22-October-12, 20:04:47
Thanks for help. I tried to use it. Interestingly Control Center and Live Update are not working together. Just ones is working if I install it before than other. Second gives error as "Driver can't load".
Control Center need admin permissions to runs properly.

Portege Z835 - need help with BIOS update

Hello.
I have a Portege Z835, with a battery problem: don't charge. The battery indicator says "3% connected and charging" but it don't charging the battery.
Some forums says that the solution is updating the Bios. I have a Bios update v.1.60 ready for install. When I try to install, we get the message "the battery power is not enough".
My power cord is always connected. If I disconnect the power cord, laptop is off.
Please, what can I do?
Thanks.
GB.

Hi
Theoretically this issue could be related to faulty battery.
As mentioned by Silas, even if the notebook is not ON the battery should be charged if AC adaptor is connected. So Im afraid its not BIOS issue and update would not help you.
You can try this: If notebook is OFF, remove the battery.
Now connect the AC adaptor and power up the unit now the OS should not report any battery statues since the battery is not plugged in.
Now connect the battery and check if the battery charging status would change/increase.
If this does nothing, would recommend testing new battery.

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

Restore iPhone with iTunes on your computer.

New update on my iTunes 8.2 computer. Sync my iPads on the computer missing playlist on my computer ??? Need help. Worst update ever

new update on my iTunes 8.2 computer. Sync my iPads on the computer missing playlist on my computer ??? Need help. Worst update ever

Hello there, dancingteacher.
Removing and re-installing iTunes can be a challenging endeavor and has to be done in a very particular way. The following Knowledge Base article provides a clear, step-by-step process of removing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
The "Additional Troubleshooting" section also includes a link to updates and conflicts with software for your Windows Operating System as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

BIOS doesnt recognize SATA connected Hard Drive- need help flashing bios from bootable USB

hi
I have an envy laptop running InsydeH20 bios rev f14.
the bios doesn't recognize the internally connected hdd/ssd.
I have heard that with insyde bios', sometimes you have to unlock 'secret capabilities' to recognize hardware incl internal hdd.
but I am just trying to reflash my bios.
the problem is that I cant get into windows because it doesn't recognize my hard drive and windows doesn't allow insallation to usb connected drives.
I downloaded the patch from hp.com for my product and it actually has an option for making a bootable USB for use on the actual system, and I did this. the instructions are to just restart my computer with the bootable usb. I have tried Legacy support on and off, neither updates bios.
I highly doubt it has anything to do with the physical sata connector.
basically I need to flash my bios from bootable usb. I have done some research about making a bootable dos usb etc etc but I don't know what program to even run and how..
this is a link to my product:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
Pleeeeeaaseee someone help!!!!!!!!!!!!!!!!!!
Thanks!!

hi
I need to flash the bios of my system. the bios is not recognizing hardware and cannot boot into windows to run the bios flash for windows.
on my other comp I ran the bios update patch and chose ' install to bootable usb ' so that I could use it on my system.
cannot run on my laptop. tried booting from the media. tried allowing 'legacy' compatibility.
im running insydeH2O rev f14 right now.
here is a link to my system:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
thanks to anyone who can help!!!!!!!!!!!!!!

Need help disabling bios cache and shadowing

Can ANYONE help me put get rid of bios shadowing and cache I keep getting blue screen and I'm tired of it every time I login to the Internet. Please show me where directions are for that or what I can do

Hi @davidknox ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7t-6100 Notebook and needing to disable BIOS memory options. Here is a link on help from Microsoft. Here is another on bug checking.
Hope it helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Need usb-based bios update for x301

I have no optical drive and I do not run Windows. I can boot from a USB drive, but I can not see a way to update the bios with it because there is only a .iso file (which requires an optical drive) or an install routine which is dependent on Windows.

uuuuuuuhhhhhh Mac user ?
This could be easier than you think, if you have a contemporary version of 7-Zip on *NIX kernel and you didn't specify your OS or any other suitable comrpession program should be able to open the *.exe and even any ISO's tucked inside an MSI file.
OR
Linux GRUB does this very well and you can format your USB stick as an mbr with minimal sized ext2 or /ext3 file system for bootstrap files then another partition to emulate your CD.
BUT, you have to do this completely on the USB drive since the method I know still doesn't support SATA disks, I learned how to do this at Linqui and the origtinal article is still at:
Before you learn a new way to use grub or try to learn grub and ext file systems for the first time,,,,, for some reason I recall a method and from Lenovo which updates the BIOS from a combination of Volume Shadow Copy and a reboot to finish it and doesn't require a CD.
It obstensibly was made for single spindle X systems, but are you absolutely sure that Bios update requires Windows since LINUX offers numerous utiltiies to compile and open
http://www.linqi.org/linux/lomd.html
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

I need help, I cant updat my blackberry curve 8520

I nee d help, I cant updat my blackberry curve 8520 everytime i go here in blackberry site and check for update my phone it says try again.. and no updates for your software, how is that? I have v4.6 please help meee

You do, for sure, have your BB data plan active and are able to get email, etc.?
That is required for updating to OS 5.0.
If the OS you downloaded is not specifically for the carrier that is branded on the device you will need to install the OS to the computer and then when you're done, delete the vendor.xml file located in c:\program files\common files\research in motion\apploader.
Then after you delete that, in that same apploader folder, is a file called Loader.exe. Double click that to install the OS to your device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

I cannot connect to app store. I tried all the possible ways to fix these error but still nothing happened. I really need help i cannot update my applications. I'm using iphone 5 ios 8.1.2

please i really need help!

I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.

ADOBE I NEED HELP! - Cannot Update Suite

Well it has been a fun day! I am having an issue and I originally posted my problem in the Creative Suite - Windows forum and gave it a few days and the one reply I received did not solve my issue. So I decided I would have to contact Adobe Support. I first went to online chat which I prefer and spoke with someone. I was quickly told that they could not solve my issue and I would need to speak to a "product expert" and gave me the Adobe 800 Support Number. I then called and was told there would be a 2 hour wait! The system said it would call me back, which it did. I spoke with a man who said he would transfer me to the correct department. After being on hold for 10 - 20 minutes another man answered and I again explained my problem. He needed to research the issue. After another 10 minute hold I was told that another department handles these issues and I would be transferred again. As I write this I have been on hold going on 90 minutes with no answer. I had to hang up as I have other calls and work that must be taken care of today! Adobe your support is some of the WORST I have ever seen from a company of your size! There have been a few exceptions and I will say that in general the support provided here on the forums is excellent. This is the reason I now turn to this forum. I know that there are several Adobe employees that reply on this forum regularly and hopefully if someone cannot help me solve my issue the Adobe Employees can help me cut the crap and get to someone who can help.
Here is my issue:
I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error:
The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect.
I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked.
I am not sure what else to try or do at this point.
Are there any other recommendations to solve this issue?
Note: I am running Windows 8 Pro using the Creative Cloud Version of CS6 and I check for updates by going Help > Updates via any Adobe program.
PLEASE HELP!

Hi Lynda
Sorry to hear that you are facing this problem with updater. As you have already created the log file using log level 10. Could you please send me the updater log file at [email protected] from following location so that I can debug this issue .
Log file loction
              - Vista/Win7: <%localappdata%>\Adobe\AAMUpdater\1.
              - Win XP: <User>\Local Settings\Application Data\Adobe\AAMUpdater\1.0
              - Mac: ~/Library/Application Support/Adobe/AAMUpdater/1.0
Please zip the complete 1.0 folder and send it across.
Thanks,
Vikas Talwar

Need help in sql update table

Hi,
I have a data in the table like below
Before:
ID     SEQ_ID     Manager_id     Reg_days
1     1     111     1
1     2     222     3
1     3     333     5
1     4     444     7
1     5     555     9
Action: User deletes SEQ_ID #3
After:
ID     SEQ_ID     Manager_id     Reg_days
1     1     111     1
1     2     222     3
1     3     444     7
1     4     555     9
could you please help me the query to update the table how what was seq_id #4 becomes seq_id #3 and what was seq_id #5 becomes seq_id #4; i.e. every sequence number > the one deleted is decremented by one so that the sequence numbers remain contiguous.
Thx in advance

[Edit: why do you never mark any of your questions as "answered"? Providing feedback is a courtesy that encourages people to answer.]
user586 wrote:
Is it possible to update it to write in a procedure or trigger to call the procedure in the code. Plz. let me know or help me.I thought you said you wanted to do this every 3 or 6 months? In that case no trigger!
Do not try to do this in a trigger!
Test data:drop table T;
create table T(id, SEQ_ID, MANAGER_ID, REG_DAYS) as
with IDS as (
select level id from DUAL connect by level <= 10
), REST as (
select level seq_ID, level+100 MANAGER_ID, level*2 - 1 REG_DAYS
from DUAL
connect by level <= 10
select * from IDS, REST;
delete from T where SEQ_ID = 3;
commit;
select * from T where id = 1;
ID SEQ_ID MANAGER_ID REG_DAYS
1      1        101        1
1      2        102        3
1      4        104        7
1      5        105        9
1      6        106       11
1      7        107       13
1      8        108       15
1      9        109       17
1     10        110       19Solution:merge into T
using (
select new_seq_id, rid from (
    select SEQ_ID,
    ROW_NUMBER() over(partition by id order by SEQ_ID) NEW_SEQ_ID,
    rowid RID
    from T
where NEW_SEQ_ID != SEQ_ID
) NEW_T
on (T.rowid = NEW_T.RID)
when matched then update set seq_id = new_t.new_seq_id;
70 rows merged.
select * from T where id = 1;
ID SEQ_ID MANAGER_ID REG_DAYS
1      1        101        1
1      2        102        3
1      3        104        7
1      4        105        9
1      5        106       11
1      6        107       13
1      7        108       15
1      8        109       17
1      9        110       19Most importantly, if you run the MERGE twice in a row, the second time you get "0 rows merged." The code only changes the rows that need to be changed.
Edited by: Stew Ashton on Oct 29, 2012 9:15 AM

Need help with cs5 updates

I upgraded to CS5 recently. I started getting no
tices there were updates available. When I got to the update
page and clicked on update, I got a message that said 'another
instance of updater is running, please try again later". This has
happened each time I tried to run the updates. It has been going
on for days. I am at a loss as to what this means and how I go about
getting the updates. Any suggestions? I am not a computer or photoshop
whiz, so I need basic help.

That did it - thanks for your help
Jim R

Need help in firmware update !

Hai everyone,
Am new to this discussion. I've downloaded the latest N70 (code: 0539240) firmware update from the nokia official site. when i start running it, it shows starting application and stays like that for hours nearly 2hrs. I tryied running with the pc suite already installed but it gave the same result. Should i wait longer ....is this normal or is there something wrong with this software and why does this software need an internet connection for the update.
Any help wud be greatly appriciated !

i have same problem dude..
this problem starting from nsu version 1.3.7..
So, in version 1.3.6 there is no problem when running application
so, if it been so longgggggg after 5 min
goto
task manager>process tab & end process
1. nsl_host_process.exe
2. nsu_ui_client.exe
and running nsu again
sometimes when u run, nsu_ui_client.exe is not run too, so nsu will make so long to finish loading or will not end loading..

I Need Help in BIOS Update!!!

Similar Messages

Maybe you are looking for