I need help in logical system name in business system
i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
pls giv me a steps to reflect changes back in ID.
thanks & Regards
Manikandan Shanmugam
open BS in edit mode,
choose from menu: Adepter Specific Identifiers
Here you push button: Compare SLD data
Save and activate
Similar Messages
-
SLD: Adjust / Add logical system name for Business System [XI 3.0]
Hi,
In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
KristianIn a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan -
Same Logical System Name, different Business System
Hi all,
I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
IXHi,
You cannot have same logical name for two business systems....
Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
1. Create a business system with this logical system
2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
This may lead to discrepancies....
Regards
Suraj -
Logical Sys Name for Business system in SLD for Third Party
Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
GowriHi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo -
Logical system name in business system (SLD)
Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri -
Logical system name in SRM system
We are into SRM version 5.(SRM server 5.5) with the backend system as SAP ECC 6.0 .
The logical system is defined as '0000000050' for backend SAP system . All the systems like CRM and BW uses this as the logical system name for backend system . Recently SRM is implemented in our organization and we have no other choice and have to use the logical system name as '0000000050'
When product categories are assigned in the org attributes , the system stores the back end system as 50 and this is the issue. SAP support mentions that this is issue with logical system naming convention and that need to be fixed . But they fail to understand that the same name works fine in all other systems and also in SRM system except product categories .
Is there any OSS note for this fix. I would like to hear your experiences in this scenario.
Thanks
ManiHi Mani,
Logical System names are system specific, hence you have a different name in SRM system which will represent your backend system and this is not at all an issue. As suggested by SAP; '0000000050' is not the best name as per best practices.
You should have a name which should be of the pattern: <SID>CLNT<Client Number>.
Now here is the solution/work around. But be very careful and try this in sandbox system before being carried out in Dev/QA/PRD systems. Please make sure no other users are performing any activity while these tasks are being carried out.
In addition, please read through the ["Set up and system copy of SRM server 5.5";|https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf] guide before you carry out this activity:
The below activities are to be carried out only in SRM system
I assume SRM & Backend are separate instances
1. Create a new logical system name for the backend system in SRM system as per the standard suggested above.
2. Then use the transaction BDLS, to convert the old logical system name to new logical system name in all the tables.
3. Now, the step 2 ensure the logical system name is converted appropriately in all tables except SRM Org Structure related table.
4. Use the report RHOMATTRIBUTES_REPLACE, for replacing all the old logical system value with new logical system value. Please note while providing the inputs in the screen, there will be a Checkbox field called "Sub-String", you must check this one for all attributes you enter in the report. Then when you execute the report, a list will be display, here you have to select all the rows and click the first button on the toolbar. Only then the attributes will be updated.
Please let me know, if further inputs are required.
Regards, Kathirvel -
Logical System for RFC-Business system?
Hi,
I want use RFC adapter for my scenario like File to RFC.
The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
Regards
Gopilogical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
you can check the logical system names of ABAP application servers at bd54 tx code.
Regards,
Henrique. -
3rd party tech systems for multiple business systems...
I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-TeresaHi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
<i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk -
Need help setting up the ultimate video editing system!
Hi,
I own a cinematic wedding film business. We have pretty significant client traffic, about 40 wedding films per year and still growing. We've decided to switch our post production studio from FCP to Premiere. We've also decided to start from scratch and invest in all new equipment for this switch. We are an apple based facility and will stay that way. We don't really have money/budget limitations. We don't allow budget to to bottle neck our company's efficiency or productivity. We want this editng system's speed, efficiency, and reliability to be priority #1!
On to my questions....
1. We will be purchasing a new mac pro as the primary editing station. What is the fastest, most efficient, and most reliable setup for running the entire adobe creative suite on a Mac pro? Or maybe another way of asking....what is the ultimate Mac pro setup for Adobe CS, and why?
2. I would like to go with an external raid system for all our projects. (We'll use the internal drives primarily for running applications only.) For the external raid, we'll need about 9-12TB of usable space. We need this system to be extremely reliable. What is the fastest connection for achieving the fastest read & write transfer rates between the raid system and the computer (esata, scsi,etc)? Also, what raid systems do you recommend that will meet our needs and why?
3. I would like to make a backup of all current projects twice a week to a seperate hard drive. My business partner will then take this drive home at the end of every day for safe offsite keeping. What do you recommend we do for this? Should we buy another duplicate raid system (same as the primary) and just mirror it, or should we buy a different type/name hard drive system? Should we make the backup system Raid 0 for easier access to files if needed? How should execute the backing-up process...drag and drop, time capsule, or some third party solution?
As you can probably tell, I'm hoping to get specific equipment recommendations and well as process recommendations. Advice in any of these areas would be much appreciated!
Thanks so much!Copy and Paste your question to either the Adobe or Creative Cow forums and you'll probably get a great deal of ideas about what's ideal..
Russ -
Logical System name in Entitlement Systems
Hi,
In Authentication > SAP, I have given System and client names, but logical system name is not generated.
Please let me know how to resolve this.
Thanks in advance,
PriyaHi John,
Thanks for your response.
FQDN and IP address are added in the host file.
But still the logical system name is not displaying.
Without logical system name, other details are filled for Application Host Logon as
Application server name - Host name
All the details are filled except the selection of logical system name.
Then it is displaying the error - "Please specify complete credentials for either load balancing or direct application host logon"
Please let me know how to resolve this.
Thanks,
Priya. -
Dear all,
I need help on , How to compare two lists? I wrote the following code. but I'm not success. please help.
declare
rec_cnt number; --This for getting first record set count
pd_cnt number; -- This for getting second record set count
flg_tst char(1):='F'; -- this flag is set to false.
begin
go_block('block1'); -- In this block displays my first list
last_record; -- cursor Point out the last record.
rec_cnt := :system.cursor_record; -- here getting total number of records in the first list
go_block('block2'); -- In this block displays my second list
last_record; -- cursor Point out the last record.
pd_cnt := :system.cursor_record; -- here getting total number of records in the second list
begin
/* go_block('block1');
first_record; */
for i in 1..rec_cnt
loop /* Here my comparison of records going on. for every record in first list there should be
corresponding record in second record.
otherwise should throw message.
suppose if one record is not matched then the control should exit from the two loops and throws the message */
go_block('block1');
go_record(i);
go_block('block2');
first_record;
for j in 1..pd_cnt
loop
if :block1.TEST_ID =:block2.TEST_CODE then /*If two records match set the flag as True and exit from second loop. there is no need to further check. */
flg_tst := 'T'; /* And loops should take next record from second list, again loops goes for second list record matching */
exit;
else
if j != pd_cnt then /*not match then compare with next record of the second record */
next_record;
end if;
end if;
end loop;
if (flg_tst := 'F' and j=pd_cnt) then /*suppose one record in first list is not equal with all records in second list,exit from second loop and shows message */
exit;
elsif (flg_tst := 'F' and i != rec_cnt) then
next_record;
else
exit;
end if;
end loop;
if flg_tst = 'F' then
message('For mu test no corresponding test code');
end if;
/* Exception when others then
message('HI:= '||sqlerrm);
message('HI:= '||sqlerrm); */
end ;
end;
My problem is :
1. we should take one record from firstlist and compare with all records in second list.
--> suppose match then,we should continue for next record for first list.
-->not match then exit from two loops and shows error.
2. we should compare all the records in first list with all records in second list.
Thanks
SB
Edited by: SB on Dec 7, 2011 1:31 AMHi all,
Now I've changed my query as follows,
PROCEDURE testing IS
rec_cnt number:=0;
pd_cnt number:=0;
flg_tst char(1);
begin
go_block('med_uw');
last_record;
rec_cnt := :system.cursor_record;
go_block('panel_doctor');
last_record;
pd_cnt := :system.cursor_record;
message('rec_cnt'||rec_cnt||' '||'pd_cnt'||pd_cnt);
message('rec_cnt'||rec_cnt||' '||'pd_cnt'||pd_cnt);
begin
for j in 1..pd_cnt
loop
flg_tst:='F';
go_block('panel_doctor');
go_record(j);
go_block('med_uw');
first_record;
for i in 1..rec_cnt
loop
if :block2.TEST_ID =: block1.TEST_CODE then
flg_tst := 'T';
exit;
else
next_record;
end if;
end loop;
if (flg_tst = 'F')then
exit;
else
next_record;
end if;
end loop;
if flg_tst = 'F' then
message('For'||' '||:block1.PD_DOC_CODE||' '|| 'doc code med test has not been added, please add the test or delete the doc code');
end if;
end ;
end;
but still the problem persist.
Edited by: SB on Dec 7, 2011 5:22 AM -
How do you convert Logical System Names of BW systems in BO
Hi,
We have implemented SSO where user/role administration takes place in BW, and then imported into BO where authorization to folders and reports are maintained.
What we are NOT yet able to figure out is how to move our BO groups (i.e. those groups that were automatically created from BW roles) and have them automatically mapped to the roles in the next environment.
Below is the scenario:
BW Dev Environment
System XXD
Client 100
Role ZHR
BO Dev Environment
BW role ZHR has been imported and group XXD100@ZHR is automatically created. Also, we have granted group XXD100@ZHR access to different folders, reports and universes in this environment.
BW Test Environment
System XXT
Client 200
Role ZHR has been transported from Dev
BO Test Environment
We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained. Your help is highly appreciated.
Regards,
OluHi,
We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained
>>>you actually do NOT want to have those roles imported because the role from you first system doesn't exist in the second system.
You first system is pointing to system XXD with Client 100 and the second system is pointing to system XXF and client 200 - very different systems.
the roles have to be imported as part of the overall SAP authentication configuration. In case this is about having a possible identical folder and security structure I would suggest you use also groups in the BusinessObjects system - standard BusinessObjects groups - use those to assign security and then assign the SAP groups as subgroups. In that way you keep the security configuration and only assign the right subgroups.
ingo -
Need help in setting file name with special characters in attachment
Hi
We have a requirement where we need to set the file name that contains special characters (like Russian) and send mauil using Java mail.
If we set the file name as such, the attachment in the email contains garbled filename
Can you pl let me know how to resolve this?
We should use the file name as attachment name and this will have say special characters. The receiver who gets the mail should get with the correct attachment name
One important point.. the attachments are opened from MS outlook.
Thanks and regards
Ram
Edited by: 884910 on 13 Sep, 2011 5:00 AMRead the FAQ carefully. You don't need to call encodeText unless you're using a really
old version of JavaMail.
And, it depends on whether the mail reader you're using is handling encoded parameters
according to the (new) MIME standard, or according to the (old) non-standard hack.
Sadly, without knowing what mail reader the recipient is using, it's impossible to use
encoded filenames that will work everywhere. -
Hello everyone,
This is the requirement,
I have a table like this below :
Actual table: Item_Seller
item_id
seller_name
12310450
Pro Team
12310450
CSNStores.com
12310451
CSNStores.com
12310452
CSNStores.com
12310452
Pro Team
12310453
Pro Team
12310691
CSNStores.com
12310691
Pro Team
12310692
CSNStores.com
12310692
Pro Team
The requirement is to concatenate seller_name in the table like below output, this should not be performed using a stored procedure. I need help in writing a select query to display the below output.
Item_id
sellername_concat
12310450
Pro Team,CSNStores.com
12310451
CSNStores.com
12310452
CSNStores.com,Pro Team
12310453
Pro Team
12310691
CSNStores.com,Pro Team
12310692
CSNStores.com,Pro Team
Any help would be much appreciated!
Thanks
MadhumathiJust this would be enough
SELECT item_id,
STUFF((SELECT ',' + seller_name
FROM Item_Seller
WHERE item_id = t.Item_id
FOR XML PATH(''),TYPE).value('.','varchar(max)'),1,1,'') AS SellerName_Concat
FROM (SELECT DISTINCT item_id FROM Item_Seller)t
see
http://visakhm.blogspot.in/2014/01/rowset-concatenation-with-special.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
No Logical System Entry in Business System
When I will send an IDOC from XI to a target R/3 system, I am getting an error "Unable to convert the sender service to an ALE logical system "
I checked the threads and the problem seems to be, that there is no Logical System recognised by the Business System.
I'll checked the logical System in the Technical System in SLD, and it is there.
I checked SALE, and the entry is in the systems.
But when I go to the Integration Directory and check System-->Adapter Specific Informations, I see an empty entry for "Logical System". The field stays un-editable and when I hit the "Sync with SLD" button, nothing happens.
Any idea, how to either enter the logical system or make it recognise the SLD entry?
Thanks for any hints, points will surely be awardedHi,
Have you looked int XI FAQ by Michal?
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Have a look into the weblog
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
which addresses your problem.
Regards,
Jai Shankar
Maybe you are looking for
-
How do I get idvd to work. It is now not supported on my Mac. OS 10.9.5
I have not used my idvd for anything but, playing dvds. It's been a while for that too. I just tried to play a disc, already in the slot, and the msg comes up that idvd6 is no longer supported. I am running 10.9.5 Any ideas??
-
Where to get wallet file of OMS 11g
Hi all, I have installed 11g Grid control OMS and repository database too. now evwerything is perfect, but on the agents i want to map the OMS server at the agent i.e. EMD URL as a netscller name. my server name is : - HOST11g the server name mapped
-
Table maintenance for HRUS_D2 missing in SRM 7.0
Hi All, The table maintenance for HRUS_D2 is missing in SRM 7.0. Is there any other other way of maintaining substitue on a large scale by an administrator. i know we can assign substitute form portal , but initially we want some substitute set in
-
WD HDD - First connected but later didn't work, why?
Hey Community, Yesterday I connected my external hard drive to my macbook pro. I wanted to activate the time machine so I have space on my mac. When the time machine automatically came up I forwarded it to connect it to the Time Machine. When the pro
-
Hello every body, when i connect to oracle 10g with my java code am getting network adapter could not estblish the connection.My databases on remote system i need to connect remotely.What are things i need to taking care.Any configuration .. regards,