I need help in restoring data recovered from hard drive crash to new hard drive

I have the data that was recovered by a recovery service (long story) from my wife's hard drive after it crashed, which is now stored on my computer. There are two user data sets that have been recovered, one for each of us. I need to put each on my wife's computer with its new hard drive, which now has OSX 10.10.? (Yosemite) on it.
My wife's computer was running OSX 10.7 (Lion) when the hard drive failed and my computer is still running OSX 10.6.8 (Snow Leopard).
I was told that I should use the Data Transfer Utility (starting my computer up while holding the "T" key), but I have forgotten what I have to do when I start up her computer. Are there any operating system compatibility problems that are sensitive to this process?

That is a Microsoft Windows question?? You should probably ask this question on Microsoft's Forums. BTW there is no "Windows 9". Only Windows 7, Windows 8 and apparently MS is skipping the number 9 in favor of 10.

Similar Messages

I need help to transfer my movies from I tunes to an external hard drive please

I need help to transfer my movies from I tunes to an external hard drive please

Teach a man to fish, feed them for life.
https://discussions.apple.com/message/16276201#16276201

HELP! Need help in restoring APEX application from database backup

I accidentally deleted many pages from my development APEX environment when I thought I was deleting from QA. By the time I discovered it, it was too late to do a flash back. The DBQ I am working with is now trying to recover from a database backup, but we are not having much success. Can someone point me to any documentation that may exist on exactly what to restore from what schemas? It is not intuitively obvious what should be extracted and restored? Any help would be GREATLY appreciated!

I have older exports, but I would loose 2 weeks of work by going back to them. I need to be able to restore from a database backup so I get back my changes. What we tried to restore didn't bring back the deleted pages so we must have done something wrong.

Upgrading hard drive... need help on how to prepare current CS6 for reinstall on new hard drive

I'm about to upgrade my hard drive to a larger one and will need to reinstall my CS6 Web/Design Suite... I've seen many people having issues with activation and licensing after they reformat their computers or buy a new one and try to install the programs on the new "system". How should I go about preparing my Adobe software on the current hard drive so I won't have any issues resintalling on the new hard drive? I will be installing CS6 Student/Teacher version on Windows 7 Pro 64-bit...
Thanks for the help!

Thanks!
I wondered if that was all I needed, but when I built my new system and installed PS CS4 I kept getting errors. So, I went back to the old system and deactivated it and still got errors. Uninstalled it deactivated and still got errors on the new system. When I talked to Adobe they just kept telling me the key was invalid (even though I had been running that same program and key for the last 4 years without problems lol) and it was not a burnt copy or pirated. I had the orginal box with the original DVD case and serial number on the case... A friend of mine had upgraded their rig and went to a Suite so he gave me his CS4. But, needless to say (as it is said all over these forums apparently) Adobe was of no help at all so I had to buy a new version. I'm not looking to go through all of that BS again, haha.
So as long as I deactivate the Suite (or do I need to deactivate each program separately?) I should be able to reformat (or upgrade hard drives) and reinstall CS6 as many times as I want? (I usually do a reformat like once a year to keep my computers clean and free of junk that may have been downloaded by other household members...)

NEED HELP with contact/data recovery from restore backup before current

My girlfriend synched her iphone 5 to itunes 6 months after purchasing it and wiped all of her data. Instead of clicking "restore backup", she chose "Backup now", which replaced the version we needed. Is there anyway of retrieving the data from that restore?

No, not unless she had a backup of the data she loss.

HT4859 Need help finding & restoring lost info from a cloud

I have been backing up my iphone to a cloud. Somehow half my "Notes" are missing today. How do I restore them from the cloud backup?

Restoring to an iCloud backup has to be done in the initial device setup process, which requires first erasing your phone. If you have any newer data on your phone now that is not in the backup that you want to save you'll need to do that first. When you're done, go to Settings>General>Reset and tap Erase All Content and Settings. Then go through the setup screens on your phone and when given the option, choose Restore from iCloud Backup. Be sure it is connected to wifi and your charger as this will take some time to finish.
Apple's documention doesn't make it clear whether or not notes are included in the iCloud backup. Hopefully this will restore your missing notes.

HT4623 Really need Help to restore back up from iTunes esp minecraft

Did back on computer on iTunes from iPad . While restoring nothing comes back but apps . Had lots and lots of minecraft work done. How do I restore that back. Please help. Really critical to get it back.......... For my little one.please help

You backed up the iPad on the computer.
Good
With your iPad connected to the computer, find the iPad name in the left column.   Right click on the iPad name
It should show the option to restore from backup.   Choose that option.
This should put data back on the iPad.
If you have multiple backups, you might want to delete older backups.
Click on iTunes from top bar, select preferences, then devices.   In the box it will show backups by device name.

Help! Advice on recovering from a disk crash, please

My image disk crashed, and is unrecoverable. I thought that I been backing up regularly but, through nobody's fault but my own, the last 6 months of images weren't properly backed up. Sigh.
The good new is that my catalog is fine, having lived on another disk, and many of the original images, all raw's, are still intact on various flash cards. So, my question is, how should I proceed? Should I re-import them? Should I copy them by hand, and then help the catalog to find them if it doesn't? Or, ???
I'm on a MacOS 10.6.
Thanks much for any help with this!

OK, what I hoped would work does not
But one thing that could simplify bringing your copies from the flash cards into the structure and naming they should be to be recognized by your current catalog:
If you imported them into a temporary catalog, using the same naming and destination folder logic as when you originally imported them, this would bring the files into (or close to) the correct folder structure. Then in the main catalog, they could be reconnected easier if necessary at all. If you did have some kind of a date-based folder structure and did not do too much manual renaming, this should work quite well.
Beat

Need help in converting date format

Hi,
Need help in converting date format from 'DD-MON-YYYY' to 'YYYY-MM-DD' in an .rtf template as I believe xml publisher supports the date format as 'YYYY-MM-DD' only.
Thanks,
Raj.

I got the same problem, anyone know how to solve this problem? I allready found some date functions on http://blogs.oracle.com/xmlpublisher/2008/09/date_functions.html . I also tried <?xdoxslt:month_name(xdoxslt:get_month(xdofx:substr(NEED_BY_DATE, 4,3)), $_XDOLOCALE), 0, 'nl-NL')?>, but then it returns a namespace error (Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'xdofx' used but not declared.). Anyone know how to fix this?
Edited by: user11165753 on 7-dec-2009 23:50

Need help in transfering data to my new iphone4 from my old iphone3

Hello, just received my new iphone 4, need help in transfering data from my old iphone 3 photos, emails etc. apps, thank you

http://support.apple.com/kb/ht2109

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

Need help in oracle data recovery

Friends ,i need help in oracle data recovery.
I had an oracle 8i database running on windows.
For some reason Windows operating system crashed.
It is not booting up.
I dont have current backups.But my database physical files are in the disk.
Controlfile,datafiles and redo log files are there.
Is there any way I can recover my database?
Please help in this issue.
regards
Ajith

HI citrus,
thanks for the reply.
I have installed database 9i on the same PC after O/S reinstallation.
You are saying that ,I need to keep oracle root folder same as that of my old installation ,and copy control files,redo log and data files in exactly same folders as that of old database,and then start the database?
thank you for your patience and support.
regards.,
Ajith

I need a recommended way of recovering from Bus Off errors

I have write problems when a UUT is instructed to reset. When the UUT in the reset state I get Error Passive warnings and Bus Off errors after attempting to write extended CAN messages using the Frame API.
In brief the test goes like this,
1. I send extended message 0x500 with 8 data bytes containing information to tell the UUT to go into reset.
2. I wait 400ms hopeing that the UUT get's at least 1 of the 3 possible messages. It always does and does a reset.
3. I then MUST send message 0x500 with updated data telling the UUT to come out of reset.
Problem is the write fails with a Bus Off error (can't remember the error code as I am typing this at home). I can get this to work in a brute force kind of way by repeating these steps below several times in a loop,
1. reopen the network object
2. reopen all perodic tx objects,
3. do a ncAction NC_OP_RESET on the network object,
4. do a ncAction NC_OP_RESET on all periodic tx objects,
5. do a ncAction NC_OP_START on the network object,
6. do a ncAction NC_OP_START on all the periodic tx objects,
(no warnings or errors so far from these calls allthough occasionally ends up with an exception and NI-CAN internal driver errors. I'm probably abusing the CAN standard and API with all the rapid opening and closing of all these handles and blindly ignoring errors.)
7. then do a ncWrite for all periodic tx objects (we usually get Error Passive warnings here, if the write is repeated it frequently gets a Bus Off error).
When the UUT (by chance in all honesty) gets the 0x500 message and comes out of reset, CAN operations are fine, but the problem lies when the UUT is in reset, I can't send the updated 0x500 message to tell it to come out of reset. I get randomly Error Passive errors and Bus Off errors.
Found out today this is what the UUT is doing when in reset (written in PDL),
while not received 0x500 with data indicating to come out of reset
   possibly repower most of the UUT circuitry (I can't remember)
   reset Bosch CANBUS controller circuitry on ASIC (takes 2us I'm told)
   do some unit reset processing, takes up to 100ms
wend
(yes, it resets the CANBUS controller roughly every 100ms!)
I need a sensible way of recovering from a Bus Off error and retry sending that 0x500 message again.
Any thoughts, comments, solutions?
Regards.

Hi Flump,
The idea here is that many CAN devices will "sleep" after some predetermined period of inactivity (not receiving a frame). In such cases, the device usually wakes up after seeing activity on the bus, where the amount of time it takes to go from the "sleep" state to an "active" state will inevitably vary from device to device. Well, suppose the controller on a CAN network sends a frame to a device which is "sleeping," and the device takes, for arguments sake, 10 seconds to "wake up" and become active again. By definition in the CAN standard, frames which are not acknowledged will be retransmitted. Also in the CAN standard is the requirement that a device or controller implement transmit and receive "error counters" in order that an "errant" device or controller can be "silenced" if it continues to generate errors. There are 3 basic error states, the last (worst) of which is the Bus Off Error State, which occurs when the error counter exceeds 255. Herein lies the problem; if a device takes a long time to wake up, then a controller will send, and subsequently resend, the frame while it attempts to communicate with the "sleeping" device. Since the controller's transmit error counter will increase by 8 for each frame which is sent and NOT acknowledged, and it will continue sending frames until acknowledged, the controller can actually reach a Bus Off Error state before the device fully "wakes up." This is usually undesirable, and can be prevented.
For more information about the CAN standard, see Appendix B of the NI-CAN Hardware and Software Manual linked in the Related Links section below.
The solution may be to send a single wake-up frame (just one time), then delay to allow the device to "wake-up," and then continue normal communication. It is important to realize that when a device "sleeps," it actually relies on the fact that a CAN controller will send frames multiple times. That is, the first frame received when a device is "sleeping" is NOT processed. The sudden voltage change on the bus caused by a frame transmission is sensed by a CAN device and will cause it to resume active operating conditions, but the frame which initiates the wakeup cannot be processed because the hardware was previously asleep (some of it literally not powered). Thus, if we have a mechanism for sending a single "wake-up" frame, and then delay until all devices (or at least the one we intend to communicate with) wake up, we can resume normal communications while knowing deterministically that subsequent commands should/will be processed by the device to which we wish to communicate.
In the NI-CAN API, the way to transmit a single frame - one time only - is by setting the Single Shot Transmit attribute to 1 (using the set attribute function: in LabVIEW use the ncSetAttr.vi for the Frame API and CAN Set Property.vi for the Channel API). For Frame API users, the Network Configuration object (programmed explicitly) can be used, where of course we must stop and start the task (using ncAction.vi) around the attribute setting. The sequence of events would generally be: Network Config (should have happened anyway at some point), Network Open, Stop, Set Attribute, Start, Write "wakeup frame," proceed with the program after sufficient delay. Please note that the required delay may be very small; the "10 second" wake-up time suggested for a device above is much much longer than a normal device's "wake-up period". Of course, the baud rate used on a given network will factor into how many frames can be sent by a controller in a given period, and therefore how fast a corresponding error counter will increment as a result of unacknowledged frames.
Attached is an example, which will write a single "wake-up" frame using the technique described above, where the write will take place when a "Wake-Up" button is clicked.
Is this what you are looking for?
AdamB
Message Edited by AdamB on 12-12-2006 04:47 AM
Applications Engineering Team Leader | National Instruments | UK & Ireland
Attachments:
SendSingleWakeUpFrame.vi ‏73 KB

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Need to check the data flow from R/3 to BW server.

Hi BI experts,
This query is regarding need to check the data flow from R/3 to BW server.
As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and find out if there are already any existing objects in BW system which I can use for these reports.
So, can u plz help me.

Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
~AK

I need help in restoring data recovered from hard drive crash to new hard drive

Similar Messages

Maybe you are looking for