I need help in Simulation these chips LM1036,LM386,TDA2003 NI-Multisim V10&12

Hi guys How are You
i'm work in small project and will be finish but i want change something before applied, for that i need Simulation these chips in Multisim but i don't found it to Simulation if you did this before, please Help me
My project is ( electronic stethoscope )
images of SCHEMATIC DIAGRAM
I used DIP-20,8,6 To draw a circuit, but this does not work in the simulation and I need to simulate now to update something
datasheet these Chips, Upload attachments
( LM1036 )
( LM386 )
(TDA2003)
if you Can Help, please contact me
Twitter: @H_BioMed
Fine me
Twitter: @H_BioMed
Attachments:
Mixer LM1036.pdf ‏343 KB
Low Voltage Audio Power Amplifier - LM386.pdf ‏265 KB
10 W car radio audio amplifier - TDA2003.pdf ‏231 KB

thank you Tien P - Yes, I know that, but i'm searched a lot not find spice model for TDA2003 And LM1036
i find one spice model of LM386 Upload attachments ...
wny one have spice model for TDA2003 & LM1036 please contact me
Twitter: @H_BioMed
Fine me
Twitter: @H_BioMed
Attachments:
LM386 SPICE MODEL.txt ‏3 KB

Similar Messages

I just deleted photos from my iPad. I need help on recover these photos

I accidentally deleted photos in my iPad. I need help to recover these photos. Thanks

Restore from your Backup or Re-Sync them from your computer where you have been regularily Transferring them to.

Need help on combining these two program

Hi all,
I needed some help on combining these two program. But i not very sure how to do it.
My program in working with TimeIn/TimeOut attendance taking. The snippet vi "insert data" is the where i start to TimeIn and insert into the microsoft access. And i wanted to insert it together with a camera catching the user's face. But i have no clues on how to combine them.
Can u guys give me some ideas to help me ?
Thanks in advance.
Attachments:
IMAQdx.png ‏55 KB
insert data.png ‏68 KB

Hi Himanshu,
But if i put everything inside the IMAQdx loop ,it make my whole program more complicated.
This is how my program looks like below.
I only want to display the image only when i "insert" all data into the database ( which i given at the perivous post).
Is there other way?? And how do u make the IMAQdx loop stop without putting a stop button?? Because everytime i run the program,it will run continuously at the IMAQdx loop..
Thank in Advance.
Attachments:
FYP.png ‏205 KB

Need help to explain these codes!!! Urgently!!!

Hi anyone who's here to help...I am doing my Final year project report now...i dunno how to explain these codes in word...can anyone tell me what it means? what are these codes for...? what does each paragraph indicate?
thanks.
sorry, maybe i only insert pieces of the codes and its vague...ok, in this source code...what i dun understand is....i have cut and paste the sections of codes which i dun understand as below..
bcoz this codes are passed down from my seniors who had graduated...and my task is to explain these codes in the form of a report without me having any background on programming...i tried asking some frens...its either they dunno or forgotten...this is my last hope...thanks again...thanks..
* new added code */
     Thread scroller;     //for looping purpose
     int loopcounter,count;
     // thread is to allow the program to be called every and then.
     public void init()
          /*new added code */
          loopcounter=0;[list]
**like whats does "thread scroller" means? Looping purpose? what's looping then?
**also, i've tried on changing the "Loopcounter = 0" to other numbers like 2 and 5...and when i run it on the appletviewer..my image simply runs out of my page...
[list]
*And this part...what does it mean?
/*new added code*/
            public void start() {
            if (scroller == null) {
            scroller = new Thread(this);
            scroller.start();
    } [list]
for this section here, i really dunno what it says.. "public void start"--start what? scroller again? new Thread(this)?
[list]
    public void stop() {
        if (scroller != null) {
            scroller.stop();
            scroller = null;
    } [list]
I dunno about this section also.. stops wat??
[list]
    public void run() {
          try {Thread.currentThread().sleep(100);}
            catch (InterruptedException e){}
        for (count=0; count <= 400; ) {
          try {Thread.currentThread().sleep(20);}
            catch (InterruptedException e){}
          rm.load();
    } [list]
wat is it runing here? try? catch? for? wat does it mean?????
[list]
    public void destroy(){;}
    public void update(Graphics g){paint(g);}
}[list]
now this.. wat is it destroying?? updateing wat???
[list]
this is my whole program like...
import java.awt.*;     /*Contains all of the classes for creating user
               interfaces and for painting graphics and images.*/
import java.applet.*;     /*Provides the classes necessary to create an applet and the
               classes an applet uses to communicate with its applet context.*/
/* Loadable is required for RealMedia so that it know that this code
can load images and sounds and has the startUp() method
/* HotSpotListener is required to let HotSpot call hotSpotEvent(HotSpot) when it
has been clicked
//runnable is for looping purpose ....to animate the text or images.
public class LibraryTest extends Applet implements Loadable, HotSpotListener, Runnable
     // RealMedia will load and save images and sounds.
     // It will also give information on the loading process.
     RealMedia rm;
     // Four buttons that can be clicked on.
     HotSpot hs1,hs2,hs3,hs4;
     // 1 will show image 0 and 1 will show image 1.
     int x =0;
/* new added code */
     Thread scroller;     //for looping purpose
     int loopcounter,count;
     // thread is to allow the program to be called every and then.
     public void init()
          /*new added code */
          loopcounter=0;
          // We'll place the buttons ourselves.
          setLayout(null);
          setBackground(Color.white);
          // create the RealMedia object
          rm = new RealMedia(this);
          //Start adding all image files you will use
          // image0 called pic_black
          rm.add("pic_black.jpg","image0");
          rm.add("EG3165 Tutorial 1.jpg","image0_1");
          rm.add("Question.jpg","image0_2");
          rm.add("Solution.jpg","image0_3");
          rm.add("Exercise.jpg","image0_4");
          //rm.add("cute.gif","image0_5");
          rm.add("mac-win.gif","image0_6");
          rm.add("walking-floppy.gif","image0_7");
          rm.add("eg3165_t001ver03_00.gif","image1");
          rm.add("eg3165_t001ver03_01.gif","image2");
          rm.add("eg3165_t001ver03_02.gif","image3");
          rm.add("eg3165_t001ver03_03.gif","image4");
          rm.add("eg3165_t001ver03_04.gif","image5");
          rm.add("eg3165_t001ver03_05.gif","image6");
          rm.add("eg3165_t001ver03_06.gif","image7");
          rm.add("eg3165_t001ver03_07.gif","image8");
          rm.add("eg3165_t001ver03_08.gif","image9");
          // Start button with 4 images
          // 1 Default state, mouseOver and mouseClick state.
          rm.add("1st.gif");
          rm.add("1st.gif");
          rm.add("1st.gif");
          // 2 Other button
          rm.add("prev.gif");
          rm.add("prev.gif");
          rm.add("prev.gif");
          // 3
          rm.add("next.gif");
          rm.add("next.gif");
          rm.add("next.gif");
          // 4
          rm.add("last.gif");
          rm.add("last.gif");
          rm.add("last.gif");
          // load the images now
          rm.load();
     public void startUp()
          // button 1
          hs1 = new HotSpot(this);
          hs1.setImage(rm.get("1st.gif"),1);
          hs1.setImage(rm.get("1st.gif"),2);
          hs1.setImage(rm.get("1st.gif"),3);
          hs1.setBounds(200,515,40,38);
          // same for button 2
          hs2 = new HotSpot(this);
          hs2.setImage(rm.get("prev.gif"),1);
          hs2.setImage(rm.get("prev.gif"),2);
          hs2.setImage(rm.get("prev.gif"),3);
          hs2.setBounds(250,515,40,38);
          // same for button 3
          hs3 = new HotSpot(this);
          hs3.setImage(rm.get("next.gif"),1);
          hs3.setImage(rm.get("next.gif"),2);
          hs3.setImage(rm.get("next.gif"),3);
          hs3.setBounds(300,515,40,38);
          // same for button 4
          hs4 = new HotSpot(this);
          hs4.setImage(rm.get("last.gif"),1);
          hs4.setImage(rm.get("last.gif"),2);
          hs4.setImage(rm.get("last.gif"),3);
          hs4.setBounds(350,515,40,38);
          // Place them
          add(hs1);
          add(hs2);
          add(hs3);
          add(hs4);
          // Repaint makes sure they are immediately visible.
          hs1.repaint();
          hs2.repaint();
          hs3.repaint();
          hs4.repaint();
     // Here the images are drawn.
     public void paint(Graphics g)
          g.setColor(Color.white);
          // When it is still loading show a loading message.
          if (!rm.isLoaded())
               g.drawString("loading file "+rm.getCurrent(),20,20);
               g.drawString("of "+rm.getTotalFiles(),20,40);
               g.drawString("Percent: "+rm.getPercent(),20,60);
               g.fillRect(20,80,rm.getPercent(),20);
          // Otherwise draw image1 or 2
          else
               if (x == 0)
                    //place images using x-coordinates, y-coordinates.
                    g.drawImage(rm.get("image0"),20,20,this);
                    g.drawImage(rm.get("image0_1"),80+loopcounter,100+loopcounter,this);
                    g.drawImage(rm.get("image0_2"),190+loopcounter,175+loopcounter,this);
                    g.drawImage(rm.get("image0_3"),240+loopcounter,220+loopcounter,this);
                    g.drawImage(rm.get("image0_4"),290+loopcounter,265+loopcounter,this);
                    //g.drawImage(rm.get("image0_5"),150+loopcounter,285+loopcounter,this);
                    g.drawImage(rm.get("image0_6"),400,370,200,100,this);
                    g.drawImage(rm.get("image0_7"),100,300,this);
                    loopcounter+=2;
                    if (loopcounter == 50)
                    loopcounter = 0;
     // if loopcounter+=2, coordinate=x+loopcounter, y+loopcounter.
     /* e.g. round 1, loopcounter=0, coordinate=1,3 */
     /* e.g. round 2, loopcounter=2, coordinate=3,5 */
     /* e.g. round 3, loopcounter=4, coordinate=7,9 */
               else if (x == 1)
                    g.drawImage(rm.get("image1"),20,20,this);
               else if (x == 2)
                    g.drawImage(rm.get("image2"),20,20,this);
               else if (x == 3)
                    g.drawImage(rm.get("image3"),20,20,this);
               else if (x == 4)
                    g.drawImage(rm.get("image4"),20,20,this);
               else if (x == 5)
                    g.drawImage(rm.get("image5"),20,20,this);
               else if (x == 6)
                    g.drawImage(rm.get("image6"),20,20,this);
               else if (x == 7)
                    g.drawImage(rm.get("image7"),20,20,this);
               else if (x == 8)
                    g.drawImage(rm.get("image8"),20,20,this);
               else if (x == 9)
                    g.drawImage(rm.get("image9"),20,20,this);
     // This method is called when a button has been clicked.
     public void hotSpotEvent(HotSpot hs)
          // if it was button 1 show image1.
          if (hs == hs1)
               x = 1;
          // else show image2
          else if (hs == hs2)
               {x = x - 1;
               if ( x <= 1 ) x = 1;
          else if (hs == hs3)
               {x = x + 1;
               if ( x >= 9 ) x = 9;
          else
               x = 9;
          // and repaint to show them.
          repaint();
     // Necessary for RealMedia to load your images
     public Image loadImage(String file)
          return getImage(getCodeBase(),file);
     // Also required but not used this time.
     public AudioClip loadAudio(String file)
          return getAudioClip(getDocumentBase(),file);
/*new added code*/
     public void start() {
            if (scroller == null) {
            scroller = new Thread(this);
            scroller.start();
    public void stop() {
        if (scroller != null) {
            scroller.stop();
            scroller = null;
    public void run() {
          try {Thread.currentThread().sleep(100);}
            catch (InterruptedException e){}
        for (count=0; count <= 400; ) {
          try {Thread.currentThread().sleep(20);}
            catch (InterruptedException e){}
          rm.load();
    public void destroy(){;}
    public void update(Graphics g){paint(g);}
}

Thread scroller;//for looping purpose
**like whats does "thread scroller" means? Looping purpose? what's looping then?So, you don't know what a variable declaration is, and you don't know what looping is, and you're unable to find out other than by having somebody here tell you (your school has no library, no bookstore, and no access to google--only to the Java forums).
Either your school is absolutely backwards and useless, or you're a stupid lazy git who deserves to fail the course. Either way, somebody here posting an answer for you is not going to help you.
The following might.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java. This one has been getting a lot of very positive comments lately.

Need help with Importing These Kinds of Excel Data Sheets

hy there, Can someone Assist me with this.
I got a package in SSIS. where I need to import Excel data sheets.
Those sheets are coming from Cube.
And So their format is bit different
Kindly help me how to import those With DATA FLOW TASK.
And ,
As you can see Excel sheets got Filter on their Columns.
So I am Getting much often Errors in importing those sheets Via DATA FLOW TASK.
Thanks In Advance.
# Note.
I can not Edit each Excel File Before running packages.
Packages are automated.
And also the sheets are automated, they get store in the FTP on a cyclic job.
So Have to Do it on PAckage level

You cannot hit a moving target, your data quality is at risk, too. Even if a package succeeded there is still a degree of suspect whether the data ended in the right place.
You can create a helper program that checks for data integrity, e.g. a series of SQL queries can be executed against the source to pinpoint what metadata shape the Excel arrived in. Then branch the package flow based on one or the other variant (there will
be only a handful). The branching can be done by using Precedence Constraints. Hey, but see what I say about above.
Arthur My Blog
Okay than I must do it differently. OR get the source in a better and secured manner.

Need Help Determining Which Sound Chip Is On New Motherboard

I have a Toshiba M45-S331 that had a damaged motherboard, and I couldn't find the exact replacement MB at a reasonable cost, so I substituted a #V000051700 MB. After reassembling the laptop, everything works great except I get no sound. I'm hoping that the issue is that the replacement motherboard has a different sound chip, so a different driver would be required, but I'm having difficulty finding out which chip is integrated in the MB, and therefore which drivers will work. Is there a way to get the appropriate spec's on the motherboard? There were some sub-numbers on the MB - 6050A0067901, if that helps.
After further research, I found out that the new motherboard came out of a Toshiba M45-S3553, which has the same drivers as the original M45-S331, so the problem must be something other than the sound drivers. It may be the sound chip is bad. Any other ideas?

The RAM is pretty minimal in that machine, but it will run OS 9. In my experience eBay is problematic for OS purchases unless you know exactly what you are doing. Never buy "Restore" disks unless it is for your exact machine. (Keep OS X away from your iMac until you determine that it has the 4.1.9 firmware update!)
Apple Rescue, here, is one of the better places to get OS disks. OS 9.2.1 would be my recomendation.
Put a little more RAM in that iMac, and I think you'll find the Mac an enjoyable experience, and ... welcome to the "Apple Orchard" where there are no viruses, no spyware, and no blue screens of death.
David

Need help with Simulator

I've been using DVDSP4 for a year and a half and this is the first time that I haven't had subtitles show up in my Simulator. The subtitle track is activated, View is checked in Simulator...everything seems to be working as usual--anyone have any thoughts?
Was thinking of trying to burn it in spite of the issue above just to see if it's a glitch but thought I would try here first.
ndt
Mac G5 Mac OS X (10.4.3) DVD Studio Pro 4

I burned it and it worked fine but I would still like to know why subtitles weren't showing up in the Simulator and if anyone has ever had any issues of this sort for future reference. Thanks.

Need help for JMX thesis!

Hi all,
I've started to write a diploma project about the Java JMX architecture.
I m looking for programmers who have some skills and experiences in this area, since I've got several open questions about it I couldn't solve.
I m also up to pay for helpful answers....
Thanx a lot!
Marc

You may get better luck posting specific questions to the forum. Also look at the Sun JMX site located here http://java.sun.com/products/JavaManagement/ (if you haven't already seen it).

On my ipod, how can i unredeem an itunes gift card because i had to do these security questions i forgot the answers to. I NEED HELP!!!!!!!!

on my ipod, how can i unredeem an itunes gift card because i had to do these security questions i forgot the answers to. I NEED HELP!!!!!!!!

Maybe:
How to manage unused iTunes Gift Card and Gift Certificate balances
Have you tried this to try to reset the security questions.
See Kappy's previous discussion.
HT5312 How to recover security...: Apple Support Communities
Contact iTunes by:
Contact iTunes

Need help on these faq's

Hi,
Need some info on these questns...pls help
1.What is the advantages of using ABAP objects in reports?
2. What does an EXEC SQL statement do in ABAP. What is the disadvantage of using it?
3. The format of hierarchical sequential ALV?
4. Explain HOST command? Is it possible to run the host command in SAP environment?
5. How to backup Sapscript layout set?
6. Difference between parameters SET and GET?
7. What is the coding example for filling a BDC table?
8. What are the components of the SAP menu?
9. Explain Scroll function?
10. Steps to set a lock on a record within a DB table?
11. What are the exceptions in Function Modules?
12. What are the events driven in a batch job?

Hi David,
This is regarding SET & GET Parameters.
SAP allows you to make use of SPA/GPA technique to fill the input fields of a called transaction with data from the calling program.SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
If you want to set SPA/GPA parameters before a program call, you need to know which parameters are linked to which fields on the initial screen. A simple way of doing this is to start the program that you want to call, place the cursor on the input fields, and choose F1 followed by Technical info. The Parameter ID field contains the name of the corresponding SPA/GPA parameter. Alternatively, you can look at the screen definition in the Screen Painter.
The SPA/GPA parameter for the input field Company has the ID CAR. Use this method to find the IDs CON, DAY, and BOK for the other input fields.
The following executable program is connected to the logical database F1S and calls an update transaction:
REPORT BOOKINGS NO STANDARD PAGE HEADING.
TABLES SBOOK.
START-OF-SELECTION.
WRITE: 'Select a booking',
SKIP.
GET SBOOK.
WRITE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
HIDE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
AT LINE-SELECTION.
SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
'CON' FIELD SBOOK-CONNID,
'DAY' FIELD SBOOK-FLDATE,
'BOK' FIELD SBOOK-BOOKID.
CALL TRANSACTION 'BOOK'.
The basic list of the program shows fields from the database table SBOOK according to the user entries on the selection screen. These data are also stored in the HIDE areas of each line.
Reward If useful.
Regards,
Chitra

I need help with these two crash IDs nsStyleContext::FindChildWithRules(nsIAtom const*, nsRuleNode*) and DFusionWebPlugin@0x86b5

I need help with these two crashes...
PL_DHashTableOperate | GCGraphBuilder::NoteRoot(unsigned int, void*, nsCycleCollectionParticipant*)
DFusionWebPlugin@0x86b5
The first one happened a couple of days ago, a few times and not on any specific website.
The second one only happens on the site below.

The second one indicates a problem with the DFusionWebPlugin that shows in your More system details list.
# D'Fusion Web Plug-In for Safari 64 bits (3.00.13774.0)
# D'Fusion Web Plug-In (3.00.13774.0)
What you posted are crash signatures.<br />
It might help if you post the actual crash IDs (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx).<br />
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
See http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)

I cannot connect to app store. I tried all the possible ways to fix these error but still nothing happened. I really need help i cannot update my applications. I'm using iphone 5 ios 8.1.2

please i really need help!

I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

HT201210 I did all these steps and i still cant restore it!! Need Help!!

I did all these steps and i still cant restore it!! Need Help!!

Delete and redownload them if doing so is free in your country.
(83692)

Hi I am receiving thousands, yes thousands of eMails from APPLE Support Communities, In My inBox there is more than 26.000 eMails from these communities, and i Need Help from you, i will appreciate.I am not panicking but i've ever seen this !

Apple Support Communities
HI
I am receiving THOUSANDS, YES THOUSANDS of eMails from ALL Apple Support Communities.I deleted some one thousand but still more than Normal.
Please i need your Help.This is Enormous!!! I've never seen this happening! It should be a huge mistake that everybody from All Apple Support Communities
sending me their complains? I think it is a big Mistake, or Something bigger, i don't Know! I just need Help in this moment. it's been more than three or four days
i saw a number of eMails from Apple Support communities landing in my eMail address, should this be normal? I don't think so.
I appreciate any Help
Kind Regards
& a Happy New Year

Click Your Stuff in the upper right and select Profile. In your profile there is a link to the right to manage email notifications.

I need help in Simulation these chips LM1036,LM386,TDA2003 NI-Multisim V10&12

Similar Messages

Maybe you are looking for