I need help ! Just help me because I'm new ?
Hi there !
I installed windows 8.1 and then visual studio 2013 . then because I need the sharepoint server I installed hyper-v windows server 2012 , installed active directory domain , add new forest , sql server 2012 , sharepoint foundation 2012 , and create a new
server farm successfully , but now when I run visual studio on windows 8.1 and want to add sharepoint connection to the sharepoint solution it give the same Error that give if sharepoint is n't install on local ?
Please help me how can I add sharepoint connection ( sharepoint that installed on hyper-v windows server 2012 . the windows server that installed as vm on windows 8.1 ) to visual studio ( visual studio that installed on windows 8.1 ) ?
Help me please and for give me if my English is bad
Thanks
Great Regards :
Raha
whit the best regard : Raha
Please repost your question in the correct forum. This forum is for the product Virtual Server 2005.
Since you need help with SharePoint, one of the SharePoint forums would be a better place for help.
http://social.technet.microsoft.com/Forums/en-US/home?category=sharepoint
Similar Messages
-
Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.
Hi there
I'll pass your details to our Russian team and they'll contact you to assist further.
Kind regards
Bev -
maybe its just me but verizon had my rebate for a month and some change and still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im looking into a lawsuit now so aggravating..my phone is def on a blank sceen right now
JCLouis,
We saw your story and are very worried about what we read! This isn't like us at all and we are here to help sort it all out. We recommend calling the Rebate Center to check on the status. Their number is 1-800-457-0864.
We can help you right here with your phone! How often does it turn off? Is it just that the screen goes black or does it completely power down? Also, does it start back up by itself if it does power down?
SarahO_VZW
Follow us on Twitter @VZWSupport -
is there any way to delete my apple id because i currently have 3 and i only need one. please help. thanks
No. Apple IDs can't be merged or deleted.
(87219) -
I can't download the latest itunes (I need to for my phone) because it says I need an updated OS version, but my computer says everything is up to date. Any help?
First you need to install Mac OS 10.6. To do this you have to buy the OS disk. (This is a whole different OS, not an update of 10.5.) Order it here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You may be able to install an even newer OS, but you have to get 10.6 first.
Please look at Apple Menu / About This Mac / More Info... and check under Hardware Overview for the Model Identifier of your Macbook. That will tell us whaat is the highest OS you can install. -
Help,just entered registration code for quicktime pro,help needed
Help,just entered registration code for quicktime pro,help needed,cant seem to see the quicktime pro screen i saw on internet with all the edit and extra things at the top,i dont understand this,any help,Dave
I hope this helps http://support.apple.com/kb/ht2240 good tips on your prob here..good luck
-
Help needed. Just updated my I phone 4 and lost all my notes, and no I didn't put them in the I cloud. Please help. Need those notes!
You could always check to make sure itunes is updated to 10.7 but im sure gdgmacdude is
right.
thanks
gdgmacdude
Hey dude
are there anymore hardware failure errors u know of
im kinda a novice apple man and could use all the help i can get
capp -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
In need of immediate help with FCP new user taking over colleagues position
Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes -
In need of major help - exchange server
I need some major help. I just bought my first Blaclberry (8330) and can't get the email to work. We are set up on exchange with Outlook web access. When I go through all the steps I get a message that says a connection could not be established. Check that the server name is correct and the server is available. I know the server name is correct because I use it to connect to my email away from the office on my home computer as well as my laptop. I'm not very computer minded so can anyone tell me what I'm missing. When I logged on to my email account from the home computer tonight i got a message about a certificate error. Would this make a differnce? We have a guy who works on our computers and he isn't that familiar with the Blackberry. He mentioned something about using a POP account. I had no luck there either. If anyone can help it would be greatly appreciated.
sounds like your exchange server is using an invalid ssl certificate. Contact whoever manages your Exchange environment and ask him to walk through the process with you.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/ -
Need help with help pse4 not supported by adobe. how to do topics not available and I have never used any thing like this. Help says there is a download but have not been able to get it. What's a rookie to do ? Is there somewhere I can go to find out how to use PSE4?
The internet is overflowing with tutorials on PSE. Just google what you want and include Photoshop Elements 4 as part of your search term, or go to the library and they may have several different books on PSE 4. For PSE 4, you won't find a mac specific book, but that doesn't matter because the editor is the same on either program. Just substitute Command for Ctrl and Option for Alt in the keystrokes, and ignore anything about the organizer.
Some popular sites for learning elements:
http://www.photoshopelementsuser.com/
lynda.com
eclecticacademy.com
youtube has a lot of video tutorials, too. -
Need a little help with dial setup on CME
I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks. I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN. My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
What's happening is this. I can dial local numbers in my area as 7 digits or 10 digits. The phone company doesn't yet force us to dial area code and number for local calls (10 digits). I can still dial 7 digits. But...if I put an entry in CME that looks like this....
(by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513. I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9....... Understand what I mean? Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...BUT...here's the interesting thing. If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN. It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late. It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
I'm more familiar with how to setup dialing in the Avaya via ARS. My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does. I just need some pointers and examples to look at :-) I think I've almost got it....but I'm just missing something at the moment.
Just so you understand, the call flow should be like this: Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya. I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya.
Thanks for your helpHere is a good document that explains how dial-peers are matched in the Cisco world:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......T
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
Please rate helpful answers! -
Need a little Help with my new xfi titanium
+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help../Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard. -
Need a little help with syncing my iPod.
I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.
/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard. -
Quality Playback-.need a little help
Quality Playback….need a little help
I’ve posted in the Premiere forums too, because I’m not sure where my issue is in converting .MOD files, the export of edited footage from Preimere Pro CS4 or if it’s in Encore.
The quality just does not seem that good, I know it’s not HD quality, but it should be better than what I have. Seems over pixilated especially around objects.
Here’s my steps
Convert .MOD files using Mpeg Streamclip to a .DV file format
Settings Compression DV (DV25)
Standard NTSC 720 x 480 29.97 fps
Aspect 16:0
Everything else is default
Import to Premiere Pro CS5
Edit footage
Export to quicktime .mov file
NTSC DV Widescreen
720 x 480 quality 100%
codec is DV25 NTSC
Import .mov files to Encore CS5
Build menus and playlists
Export with default settings approximately 1hr 45min of edited video
Thanks
MABBill
Thanks for your help and patience.
I posted a screen shot of the mov export settings I was using. I’m going to try Ann’s conversion method on the mod files to see if that improves things.
You asked about the Encore transcoding, what do you mean by that, are there other settings in Encore that I need to set?
I have an 1hour 45 min of video in my Encore project, burning to a 4.7 DVD. Encore says it’s using 3.3bg, which seems low.
MAB -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.
Maybe you are looking for
-
How do I create an MPG2 with Compressor that is neither 16:9 or 4:3?
I have a quicktime movie, exported from FCP which is 1280X800. I need to create an MPG2 also at 1280X800. How do I do this? Compressor only seems to create a 16:9 or 4:3 MPG2 regardless of the original source file. Thanks.
-
Ipad 2 3G Cellular Data not working after update?
Dear Apple First thing first you are teh number one in this world, there is no doubt about it and I am following apple since 6 years. I have a Apple iPad 2 Wi-Fi + 3G with cellular data. last night what I did I have updated my iOS on 3G Cellular whi
-
Need to find the kept removed files!
I am trying to get my new MacBook organized. I found that all my music files were double, so I decided to remove all the double files imported at a certain date. I checked "keep files", since I was a bit nervous if it was the right way to do it, but
-
I already made an accoount, so how can I change it so that I do not have to choose a type of credit card. Cause it does not give me the option of NONE
-
Another request for P55-GD80 new build advice
Hello! This is my first time using an MSI motherboard and I was hoping to get some advice for when I put my system together. My old system was ~14 months old - I added some RAM just before xmas and I'm pretty sure I fried the mobo due to static. Any