I need help made a huge mistake today.

so I decided to tackle my med collections since they are willing to pfd. 4400 bucks worth. This would rid me of 6 of my 9 baddies. Put on credit card and realized after the fact....oh crap this credit card has an interest rate like 20 percent. So I'm curious what my best choice would be? Balance transfer? If so what is the best card for balance transfer? currently have discover it 7500 cl 4400 bal (the one I used today)chase slate 5200 cl 0 balcap1qs10000 cl 2400 bal any suggestions are appreciated TIA

saberkitty wrote:
so I decided to tackle my med collections since they are willing to pfd. 4400 bucks worth. This would rid me of 6 of my 9 baddies. Put on credit card and realized after the fact....oh crap this credit card has an interest rate like 20 percent. So I'm curious what my best choice would be? Balance transfer? If so what is the best card for balance transfer? currently have discover it 7500 cl 4400 bal (the one I used today)chase slate 5200 cl 0 balcap1qs10000 cl 2400 bal any suggestions are appreciated TIA Yes BT it. I did that on my high amex balance today. Discover gave me a new `12 month 0 percent on BT., even though im on a promo. 14 months no 0. for purchases and BT. so after that run out. i will still have 8 months of 0. so i really have a year to pay off all my balances. about 3300 in total. 250 a month should about cover it. i just took card out of wallet. no more use for this puppy until 12 months.

Similar Messages

I made a huge mistake, my wife loaded pix under guest and as I closed it to get to my account pix were deleted. Is there any way to recover these pix? Please help!!!

I made a huge mistake, my wife loaded pix under guest and as I closed it to get to my account pix were deleted. Is there any way to recover these pix? Please help!!!

You can try data recovery software, like Stellar Phoenix. That may (or may not) recover some or (probably not) all of them. Any that cannot be recovered have probably been overwritten and are gone for good.
Note that you should not do anything further with the machine until you have the data recovery software, and should not install said software on the machine, since that may overwrite the data you're trying to recover. You'll want to have some other drive you can boot from and use the recovery software from.

Have I made a huge mistake ordering this??

I'm hoping there are a whole host of people who have ordered and had installed Infinity and get something like the service that is promised.. yet all I seem to be able to find here are people complaining about things, and a lack of replies from BT offering any explanations.
I've just ordered Option 2.. and the order has gone through and will move my line and broadband from O2 all on the same day (15th Feb). I've read the stories of no one turning up, and I know people at work who've been given the run around as well, so now I am wondering if I've made a huge mistake in my desire to have anything like the suggested speeds that I can get (38Mb Down/10Mb Up). The cabinet is about 100yrds from my house, so would hope to get at least half of that.
Anyone out there who can maybe say things MIGHT go well?

MattUK wrote:
I'm hoping there are a whole host of people who have ordered and had installed Infinity and get something like the service that is promised.. yet all I seem to be able to find here are people complaining about things, and a lack of replies from BT offering any explanations.
I've just ordered Option 2.. and the order has gone through and will move my line and broadband from O2 all on the same day (15th Feb). I've read the stories of no one turning up, and I know people at work who've been given the run around as well, so now I am wondering if I've made a huge mistake in my desire to have anything like the suggested speeds that I can get (38Mb Down/10Mb Up). The cabinet is about 100yrds from my house, so would hope to get at least half of that.
Anyone out there who can maybe say things MIGHT go well?
Hi Matt.
Probably 99.999% of Infinity customers have had the service promised, but as they have not had any problem they have had no need to come here and complain.
All forums have people complaining about things, that is the nature of forums(to aid people into sorting out problems)
As for the speeds, remember they could be going up soon, and as you are only 100yds away from the cabinet you should actually get more than the 38Mb they say. They normally err on the cautious side.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Need help made a mistake

i bought my computer on July 9th and i was told that i would get this upgrade for free, but I accidentally bought it from the app store, is there anyway to get that fixed?

Go to http://www.apple.com/support/mac/app-store/contact/ and request a refund.

Need help -To Restrict Huge temp file, which grows around 3 GB in OBIEE 11g

Hi Team,
I am working on OBIEE 11.1.1.5 version for a client specific BI application. we have an issue concerning massive space consumption in OBIEE 11g installed linux environment whenever trying to run some detail level drill down reports. While investigating, we found that whenever a user runs the drill down report a temp file named nQS_xxxx_x_xxxxxx.TMP is created and keep's growing in size under the below given folder structure,
*<OBIEE_HOME>/instances/instance1/tmp/OracleBIPresentationServicesComponent/coreapplication_obips1/obis_temp/*
The size of this temp file grows huge as much as around 3 GB and gets erased automatically when the drill down report output is displayed in UI. Hence when multiple users simultaneously try to access these sort of drill down reports the environment runs out of space.
Regarding the drill down reports:
* The drill down report has around 55 columns which is configured to display only 25 rows in the screen and allows the user to download the whole data as Excel output.
* The complete rows being fetched in query ranges from 1000 to even above 100k rows. Based on the rows fetched, the temp file size keeps growing. ie., If the rows being fetched from the query is around 4000 a temp file of around 60 MB is created and gets erased when the report output is generated in screen (Similarly, for around 100k rows, the temp file size grows up to 3 GB before it gets deleted automatically).
* The report output has only one table view along side Title & Filters view. (No Pivot table view, is being used to generate this report.)
* The cache settings for BI Server & BI Presentation services cache are not configured or not enabled.
My doubts or Questions:
* Is there any way to control or configure this temp file generation in OBIEE 11g?
* Why the growing temp file automatically gets deleted immediately after the report output generation in screen. Is there any default server specific settings governing this behaviour?
* As per certain OBIEE article reference for OBIEE 10g, I learnt that for large pivot table based reports the temp file generation is quite normal because of huge in-memory calculations involved . However we have used only Table view in output but still creates huge temp files. Is this behaviour normal in OBIEE 11g. If not, Can any one Please suggest of any specific settings to be considered to avoid generating these huge files or atleast generate a compressed temp file.
* Any other work around solution available for generating a report of this type without the generation of temp files in the environment?
Any help/suggestions/pointers or document reference on this regard will be much appreciated. Please advice
Thanks & Regards,
Guhan
Edited by: 814788 on 11-Aug-2011 13:02

Hello Guhan,
The temp files are used to prepare the final result set for OBI presentation server processing, so as long as long you dataset is big the tmp files will be also big and you can only avoid this by reducing your dataset by for example filtering your report.
You can also control the size of your temp files by reducing the usage of the BI server.I mean by this if you are using any functions like for example sorting that can be handled by your database so just push to the DB.
Once the report finished the BI server removes automatically the tmp files because it's not necessary anymore.you can see it as a file that is used for internal calculations once it's done the server gets rid of it.
Hope this helps
Adil

I need help hopefully one last time, today...:o)

ok I need my check boxes to paint or unpaint my lights, bulbs, star, when the boxes are check. I also need my buyIt button to display a $ amount in Input based on which buttons are checked. Any help is VERY VERY appreciated:o). Thanks

//619-933-5768
import javax.swing.*; // Packages used
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.applet.*;
public class DrawingOnPanel extends JFrame
     public DrawingOnPanel(){
          //super(title);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          TreeStore1 ts = new TreeStore1();//inner class object
          getContentPane().add(ts);
          setSize(700,600);
          setVisible(true);
public class TreeStore1 extends JPanel implements ActionListener
     private JLabel prompt1 = new JLabel("Merry Christmas!");
private JLabel prompt2 = new JLabel("What would you like on you tree? ");
private JLabel prompt3 = new JLabel("Your total is: ");
private JButton buyIt = new JButton("Buy It!");
private JPanel myPanel = new JPanel();
int a1,a2,a3,a4,a5, b1, b2,ct;
     private double treePrices=19.95;
     private double lights=20;
     private double bulbs=15;
     private double star=9.99;
     private double total;
     int x,radius,corner,xCorner;
     private JTextField input = new JTextField(13);
     DecimalFormat format=new DecimalFormat("$#,###.00");
     Color greenx = new Color(0,17,0);
Color greeny = new Color(0,34,0);
     //day tree start
Color green1 = new Color(0,51,0);
Color green2 = new Color(0,68,0);
Color green3 = new Color(0,85,0);
Color green4 = new Color(0,102,0);
Color green5 = new Color(0,119,0);
//night tree end
Color green6 = new Color(0,136,0);
Color green7 = new Color(0,153,0);
Color green8 = new Color(0,170,0);
Color green9 = new Color(0,187,0);
Color green10 = new Color(0,204,0);
     Color green11 = new Color(0,221,0);
Color green12 = new Color(0,238,0);
Color green13 = new Color(0,255,0);
//day tree end
Color brown = new Color(102,51,0);
     int xStar[]={392,402,422,402,410,390,365,378,359,382,392};
int yStar[]={118,142,148,160,185,165,182,155,138,140,118};
Polygon starPoly = new Polygon(xStar,yStar,xStar.length);
     JCheckBox treeBox = new JCheckBox("Christmas Tree", true);
     JCheckBox lightsBox = new JCheckBox("Lights", false);
     JCheckBox bulbsBox = new JCheckBox("Bulbs", false);
     JCheckBox starBox = new JCheckBox("Star", false);
     Font bigFont = new Font("ComicSans",Font.BOLD,14);
     Font biggerFont = new Font("ComicSans",Font.BOLD,22);
public TreeStore1 () {
add(prompt1);
add(prompt2);
add(prompt3);
add(treeBox);
add(lightsBox);
add(bulbsBox);
add(starBox);
add(input);
add(buyIt);
lightsBox.setBorderPainted(true);
          lightsBox.setBorderPaintedFlat(true);
          lightsBox.setForeground(new Color(41, 101, 35));
          lightsBox.addItemListener(new ItemListener() {
               public void itemStateChanged(ItemEvent e)
                    lightsBox_itemStateChanged(e);
          treeBox.setBorderPainted(true);
          treeBox.setBorderPaintedFlat(true);
          treeBox.setForeground(new Color(41, 101, 35));
          treeBox.addItemListener(new ItemListener() {
               public void itemStateChanged(ItemEvent e)
                    treeBox_itemStateChanged(e);
          bulbsBox.setBorderPainted(true);
          bulbsBox.setBorderPaintedFlat(true);
          bulbsBox.setForeground(new Color(41, 101, 35));
          bulbsBox.addItemListener(new ItemListener() {
               public void itemStateChanged(ItemEvent e)
                    bulbsBox_itemStateChanged(e);
          starBox.setBorderPainted(true);
          starBox.setBorderPaintedFlat(true);
          starBox.setForeground(new Color(41, 101, 35));
          starBox.addItemListener(new ItemListener() {
               public void itemStateChanged(ItemEvent e)
                    starBox_itemStateChanged(e);
treeBox.setFont(bigFont);
lightsBox.setFont(bigFont);
     bulbsBox.setFont(bigFont);
starBox.setFont(bigFont);
prompt1.setFont(biggerFont);
     input.setEditable( false );
buyIt.addActionListener(this);
     private void initializeComponent()
     private void lightsBox_itemStateChanged(ItemEvent e)
          System.out.println("\nlightsBox_itemStateChanged(ItemEvent e) called.");
          System.out.println(">>" + ((e.getStateChange() == ItemEvent.SELECTED) ? "selected":"unselected"));
          private void treeBox_itemStateChanged(ItemEvent e)
          System.out.println("\ntreeBox_itemStateChanged(ItemEvent e) called.");
          System.out.println(">>" + ((e.getStateChange() == ItemEvent.SELECTED) ? "selected":"unselected"));
     private void bulbsBox_itemStateChanged(ItemEvent e)
          System.out.println("\nbulbsBox_itemStateChanged(ItemEvent e) called.");
          System.out.println(">>" + ((e.getStateChange() == ItemEvent.SELECTED) ? "selected":"unselected"));
     private void starBox_itemStateChanged(ItemEvent e)
          System.out.println("\nstarBox_itemStateChanged(ItemEvent e) called.");
          System.out.println(">>" + ((e.getStateChange() == ItemEvent.SELECTED) ? "selected":"unselected"));
          // TODO: Add any handling code here
     public void paintComponent(Graphics tree){
     super.paintComponent(tree);//
          prompt1.setLocation(250,5);
          prompt2.setLocation(5,55);
          treeBox.setLocation(5,105);
          lightsBox.setLocation(5,155);
     bulbsBox.setLocation(5,205);
     starBox.setLocation(5,255);
     buyIt.setLocation(320,500);
     prompt3.setLocation(200,455);
          input.setLocation(300,455);
          tree.setColor(brown);
tree.fillRect(375,350,30,40);
          for(int t=230;t<550;t+=1)
     if(t<254)
          tree.setColor(green1);
     else if(t<278)
          tree.setColor(green2);
     else if(t<302)
          tree.setColor(green3);
     else if(t<326)
          tree.setColor(green4);
     else if(t<350)
          tree.setColor(green5);
else if(t<374)
          tree.setColor(green6);
     else if(t<398)
          tree.setColor(green7);
     else if(t<422)
          tree.setColor(green8);
     else if(t<447)
          tree.setColor(green9);
else if(t<472)
          tree.setColor(green10);
     else if(t<498)
          tree.setColor(green11);
     else if(t<522)
          tree.setColor(green12);
else
               tree.setColor(green13);
          tree.drawLine(390,200,t,350);
//second tree
for(int t=250;t<525;t+=1)
     if(t<270)
          tree.setColor(green1);
     else if(t<292)
          tree.setColor(green2);
     else if(t<314)
          tree.setColor(green3);
     else if(t<336)
          tree.setColor(green4);
     else if(t<358)
          tree.setColor(green5);
else if(t<380)
          tree.setColor(green6);
     else if(t<400)
          tree.setColor(green7);
     else if(t<420)
          tree.setColor(green8);
     else if(t<440)
          tree.setColor(green9);
else if(t<460)
          tree.setColor(green10);
     else if(t<480)
          tree.setColor(green11);
     else if(t<500)
          tree.setColor(green12);
else
               tree.setColor(green13);
          tree.drawLine(390,160,t,310);
//third tree
for(int t=265;t<515;t+=1)
     if(t<285)
          tree.setColor(green1);
     else if(t<305)
          tree.setColor(green2);
     else if(t<325)
          tree.setColor(green3);
     else if(t<345)
          tree.setColor(green4);
     else if(t<365)
          tree.setColor(green5);
else if(t<385)
          tree.setColor(green6);
     else if(t<405)
          tree.setColor(green7);
     else if(t<425)
          tree.setColor(green8);
     else if(t<445)
          tree.setColor(green9);
else if(t<465)
          tree.setColor(green10);
     else if(t<485)
          tree.setColor(green11);
     else if(t<505)
          tree.setColor(green12);
else
               tree.setColor(green13);
          tree.drawLine(390,160,t,280);
     //if(/*need code here lights checked*/)
               for(a1=340, a2=350, b1= 235, b2=245, ct=0;ct<5; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.red);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.green);
                                   tree.fillOval(a2,b2,6,6);
                                   //tree lights
                                   for(a1=365, a2=355, b1= 195, b2=205, ct=0;ct<3; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.red);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.green);
                                   tree.fillOval(a2,b2,6,6);
                                   for(a1=385, a2=375, b1= 215, b2=225, ct=0;ct<3; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.red);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.green);
                                   tree.fillOval(a2,b2,6,6);
                                   for(a1=315, a2=295, b1= 260, b2=270, ct=0;ct<7; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.green);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.red);
                                   tree.fillOval(a2,b2,6,6);
                                   for(a1=280, a2=270, b1= 285, b2=295, ct=0;ct<5; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.red);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.green);
                                   tree.fillOval(a2,b2,6,6);
                                   for(a1=270, a2=280, b1= 320, b2=330, ct=0;ct<2; a1+=35, a2+=35,b1+= 10, b2+=10,ct++)
                         tree.setColor(Color.green);
                                   tree.fillOval(a1,b1,6,6);
                         tree.setColor(Color.red);
                                   tree.fillOval(a2,b2,6,6);
                                   //if(starBox==checked)
                                        tree.setColor(Color.yellow);
               tree.fillPolygon(starPoly);
               tree.setColor(Color.black);
               tree.drawPolygon(starPoly);
                                   //if(bulbBox==checked)
                                        //bulbs
          for(x = 105,corner = 200,xCorner=350 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,0,0);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 230,xCorner=380 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(0,0,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
          for(x = 105,corner = 310,xCorner=350 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,0,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 300,xCorner=410 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(0,x,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
          for(x = 105,corner = 260,xCorner=310 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,x,0);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 310,xCorner=450 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,x,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              //bulbs
          for(x = 105,corner = 320,xCorner=500 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,0,0);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 300,xCorner=300 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(0,0,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
          for(x = 105,corner = 310,xCorner=350 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,0,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 300,xCorner=410 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(0,x,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                    for(x = 105,corner = 260,xCorner=310 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,x,0);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
                              for(x = 105,corner = 310,xCorner=450 ,radius = 30; radius > 0; radius-=2,corner +=1,xCorner+=1,x+=5)
                         Color bulb = new Color(x,x,x);
                         tree.setColor(bulb);
                         tree.fillOval(xCorner,corner,radius,radius);
public void actionPerformed(ActionEvent e) {
// if (e.getSource() == buyIt) {
public static void main(String args[]) {
new DrawingOnPanel();
} // main()
}

I've made a huge mistake

i just flattened and reinstalled osx and upon trying to reinstall logic i failed due to a trashed install disk. what should i do?? that is the only one that is ruined! i don't even know how i managed to not put away that very important cd.
will apple help? someone give me a disk image?
-ian

The Logic install disk is a 7GB DVD. No one is going to give you a disk image. If you're being honest about your situation, then you better call Apple and see what they can do for you.
RealDave

"I've made a huge mistake." The laments of a new mac pro and ridiculously slow AE renders

I just purchased the late 2013 model of the Mac Pro with the following specs:
Processor: 3.5 GHz 6-Core Intel Xeon E5
Memory: 12 GB
Graphics: AMD FirePro D700
It barely squeaks out a faster render than my early 2008 Mac Pro (which has the following specs):
Processor: 2 x 3.2 Ghz Quad Core Intel Xeon
Memory: 16 GB
Graphics: NVIDIA GeForce 8800 GT
I obviously did NOT configure my new Mac Pro with the best features for AE CC. I still have time to return the machine, and try again. I would appreciate advice from someone who can ID where I went wrong - and direct me toward a machine that will churn out faster renders. Thanks so much!

Sorry, I'm out of the loop on the newer chipsets so would have to defer to others in that respect. There's a lot of reading to be done on multicore rendering in after effects; but you're best off running some test renders to see if its helping or hindering your comps and then base your decision for number of cores vs core speed on that. Either way multicore rendering does require a lot of RAM. You should be getting OK render speeds if you're not using the ray trace renderer, certainly should beat out the old box, that might be something to look into.
I can't advise using those thunderbolt pcie chasis to add an nvidia card to the new mac pro trash can; the sonnet ones we bought have been finicky with our AJA cards and I can only imagine a full graphics card under load being worse performance wise.
I built my hack a few years back on an ivy bridge i7 with 32 GB of ram. They have some newer guides for hardware choices and methods at http://www.tonymacx86.com/home.php
Although my build has been extremely stable, I will caution that putting together a hackintosh can be quite a pain even if you're an experienced system builder / knowledgable with *nix. If Windows is an option that can be considered, I've heard good things about the HP Z series workstations but Quadro cards seem overpriced IMO compared to the Geforce series for the cuda cores / ram size (though purists will surely encourage you not to go the budget route).

Made a huge mistake....bought two separate copies of Tiger OSX.

I lost one copy of Tiger OSX. So instead of calling apple care, I bought another copy. When I did the install, I changed my username. I had no clue it would affect my IDISk forever.
Now when I am trying to save to IDisk, it asks for the password for my computer and it is never correct, and I cannot access IDisk. The Sync still works, but I don't know how to get my IDisc to work anymore.
The problem is in kysync frameworks but I am afraid to just delete files without knowing what I am deleting.
So, my IDisk doesn't work and webdav says my password is always wrong.
Also, I have two IDisk Icons on my screen.
What can I do to make my iDisk work again?

I have had the same username for Dot Mac account since I got my computer.....and I did an erase and reinstall using the original username I had before I bought the second disc and installed it......I know it's complicated.....but I don't remember the password for the second Tiger Disc.
If that's the case, and the passwords are only for Idisk, I can't recover it. All I know is that I cannot use my iDisc anymore for a year.
Tech support at the apple store said they didn't know how to fix it.
I just wish I had my iDisc.
I know the answer is somewhere in kysync in Frameworks in the plist probably.
Oh well......I guess I just have to do backups with discs instead, but what a hassle.
Thanks for your suggestion, however.

I need help......I just cannot connect to the internet after changing my passcode.

Hello all,
I feel extremely stupid. Today I was changing my seetings in the http://192.168.1.1 page. But when I clicked OK I lost connection and when I try and put in my new passcode it connects to the access point but the internet cannot be found. I can only imagine that i typed the passcode in incorrectly. Now i am unable to connect to http://192.168.1.1 even when I am using my wired connection as I presume I need to be connected to my wireless router. Is there any way of changing the passcode? Can I restore the factory settings? Please help....I feel as though I may have made a huge mistake .
Jon

if you connect the PC to the router directly using a cable would you be able to get online???

Need Help After BIOS Flash

I have a Z68A-GD65 G3. Some backstory: I bought a GTX 970, got a B2 error so I found a thread on these forums on how to fix it which involved new BIOS firmware. Flashed the BIOS, no errors everything successful and was prompted to restart (Y/N), hit Y.
Now here is where I realize I've made a huge mistake. The BIOS I installed was https://forum-en.msi.com/index.php?PHPSESSID=luq7dfipftb2g7c5kgdhe514g7&topic=166084.0 I very poorly assumed the Z68A covered all models in that range but it is referring to Z68A-G43. Essentially I installed BIOS meant for a different board.
The symptoms:
When I press power everything spins up then less than 1 second later everything turns off except the LED on the board's power button (inside the case). There are no beeps and no POST.
What I have tried:
- Different PSU
- Reset CMOS via battery removal and rear I/O panel button
- Removed everything except CPU and its fan.
I am looking for any help whatsoever, any suggestions welcome.

Hi
Sad news: motherboard is bricked in 99%. Ask local IT services if they can flash it for you (SPI programmer is needed) or speak to MSI : >>How to contact MSI.<<

My itunes is messed up NEED HELP?

Hi everyone I recently made the huge mistake of deleting all the files in my trash which for some reason contained th file with my itunes stuff in now all the songs will not play so i decided to delete everything and start again so I planned on downloading all the purchased music and then just adding all the extra music fom dosnloads and cds but when i went to my purchased section to redownload everything. It just said there was no music in either all or not on mac options
What do I do i am really attached to my music but to be able to download cds and everything else i need itunes but it will not work
Any replies greatly recieved.

On windows eh
Close iTunes
Go to Start
Click computer or my computer
Click C:\
Click Users
Click your account
Click your music
Click itunes folder
Drag the iTunes library.xml and iTunes library.lib files to desktop
Reopen iTunes - it should be empty
Click File>add folder to library> Locate your music folder- choose and should be corrected - unless you have duplcated music in your folder as well

I made a big mistake in purchasing ringtone Edited by Host ASAP; I'm afraid that my card will be charged a lot; please call me...I need a live person to help me on this matter

I purchased 2 ringtones in "i tune store", but i think i made a big mistake; please help me because Im afraid that i will be charged a lot; <Edited by Host> ; i need a live person to help me.
Catherine

These forums are not moderated by Apple, we are all Users like you.
Posting your personal phone number here is a terrible idea. I'll report your post to have a moderator edit out the sensetive info.
As to your actual concern, you can use iTunes Support, which also will refer you to THIS article (http://support.apple.com/kb/HT1933 about reporting issues with iTunes purchase

Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario

HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

I need help made a huge mistake today.

Similar Messages

Maybe you are looking for