I need help my i pod nano 2nd generation wont keep a charge i restored it and restarted it and it still wont work what do i do???

plz help

That's usually a good indication that the iPod's battery is shot and in need of a replacement.  Apple can swap it out for you for a flat fee or you can send it to a third party repair company for a little less.
B-rock

Similar Messages

  • Ipod nano 2nd generation - no display after charging

    I have a ipod nano 2nd generation, after charging overnite the display shows charged, however when I unplug the ipod from the charger it goes black as if it was never charged. I've tried resetting & restoring to no avail......HELP! SOMEONE PLEASE B4 I TOSS THIS OUT THE WINDOW!

    For sure.    Sorry I couldn't bring better news.
    You can find some pretty cheap repair quotes from 3rd party repair companies.  It might not hurt to look into it.
    B-rock

  • Mac Pro won't recognize i-pod nano (2nd generation)

    when i hook my nano (2nd gen) up to my mac pro, it opens in i-tunes, but it's all grayed out. it charges, but i can't play anything off of it, and i can't drag anything from i-tunes on to it. also, i noticed my i-pod icon doesn't appear on the desktop when plugged in. i've reset this i-pod to the factory settings and it doesn't change anything. i've also held down the menu/select button for a few seconds (per other discussion threads i've read) and it doesn't solve the issue. finally, i've restarted my computer with the i-pod still attached and nothing changes.
    this product may have originally been set up through a PC, but i don't see that being part of the issue.
    any suggestions, guys?

    I have the same problem with my 2G nano and MacBook Pro. This ipod has never been connected to a PC, so I don't think that's the issue.
    See similar thread at
    http://discussions.apple.com/thread.jspa?threadID=2169484&tstart=0

  • IPod Nano, 2nd Generation. Does Not Charge, and Is Not Recognized

    I have Posted: Aug 8, 2007 3:54 PM , but no replies. Also I see a certain user (Jeff) massively repeating posts.
    Please help, my friends have got me an 2GB silver Ipod Nano, it goes through the whole routine on my friend's computers, they even put music into it for me, but when I connected it to my computer, the display says its fully charged (green plug inside battery) instead of charging (thunderbolt)!
    I did everything, EVERYTHING, they asked online, from resets, reboots, getting latest vs. of iTunes, restarted over 10 times, switched from USB Normal and USB 2.0 ports repeatedly, followed both the tech support automated and live, then (as they asked) searched for a few hours to find the correct drivers, and installed everything I could for my VIA chipset, and it still doesnt work.
    I remember one of (the call dropped initially) the tech support guys saying something about USB spor.inm
    Still can't find it.
    I need to upload my music and be able to charge my iPod on my own computer! Please help!
    Windows XP Asus K8V motherboard, 2.6 GHZ AMD 64 bit, 1 GB RAM
    Kindly help, someone

    I have the exact same problem, and nothing works. When I plug it into computer, it's recognized, it syncs, and it plays while connected. As soon as I disconnect, it's dead. I've charge it overnight, I've let it drain overnight, I've plugged it into a charger with same result, I've used it on two different computers. HELP

  • I-pod nano (2nd generation), Music will not play. HELP

    When I go under music and then click songs, my songs list comes up. When a click on a song the artist and title come up but the song does not play. The screen shows the time of the song but nothing plays. I am on vacation and I do not have my music saved where I am at. Is there anyway to fix this without resetting everything and losing my music. Thank you

    that's kinda a had question... but here goes!
    my thought is that either the files aren't encoded correctly to be played on the iPod nano, or the power from the iPod isn't reaching the earbuds.
    The first thing, have you tried a different set of earbuds? it may be an issue of the headphones.
    Second, if that doesn't work, when you get back, check your computer to make sure the songs you want are one of the following: AAC (M4A, M4B, M4P, up to 320 Kbps), Apple Lossless (a high-quality compressed format), MP3 (up to 320 Kbps), MP3 Variable Bit Rate (VBR), WAV, AA (audible.com spoken word, formats 2, 3, and 4) and AIFF files.
    This could be the problem. Check the Info menu of different songs in iTunes to find out the coding of the song.
    If all fails, take the iPod to an Apple Store, there may be an underlying problem with the nano.
    good luck!
    -MD55

  • Guys I need help with my ipod touch 2nd generation

    Hi guys,
    My ipod touch is completely freezed! it show on the screen "Your ipod is stopped, Connect your ipod to iTunes" when I connect to iTunes it show this message "your ipod ... can not be connected to iTunes because it has a passcode, please enter the passcode and try to connect" but I have no access at all to anythin in my ipod!! I have tried to resetting it by pressing home button with wake/sleep button at the same time for more than 10sec but it did not work.
    Please, help me guys.
    Any suggestions?
    Looking to hearing your responses...

    Thank you lllaass. I have tried your suggestion but the problem is that wake/sleep button does work (it physicaly work) but does not dislay the switch off slide because of the displayed message!
    any other suggestion??
    my ipod drives me crazy :(

  • Can you get games on the iPod Nano 2nd generation?

    This is probably a simple question, but can you get games on an iPod Nano 2nd Generation?

    No, unless you previously bought iPod click wheel games and still have copies of them. Apple no longer sells those.
    (114468)

  • Need help with my ipod nano

    Hi,
    I need help with my ipod nano.
    I haven't turned it on in a while and suddenly it stops working when I try to turn it on again.
    Sometimes it displays:
    "www.apple.com/support/ipod"
    And right now it's displaying "OK to disconnect".
    Could somebody please advice what should I do?
    Thank you

    I need help.
    I have my IPOD nano for a while now and about a week ago. My husband bought one for his newphew and he had me download all the songs into the new IPOD (2nd Generation). Now Im having problems with mine. Everytime I try to charge and usually the screen will pop up to my original music player. This is what it says now when I open or charge my IPOD.
    "The File iTunes Library.it! cannot be read because it was created by a newer version of iTunes".
    Now, that I listen to it...all the music skip. Please help me..what should I do??
    Thank you

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • HT1329 hi i need help with my ipod nano i want to get my music from my ipod to i tunes so that i can be able to transfer the music on my i tunes to my ipad mini can you help me with that ?

    hi i need help with my ipod nano i want to transfer my music from the ipod to the itunes so that i can be able to transfer the music to my ipad can you help me with that ?

    You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store.  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like"iPod transfer," you should get some links.  (The CNET article seems to be popular.)
    Once the song files are on your computer's drive, you can add them to your iTunes library, and then sync your iPad.

  • My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

    My HP laptop recently 'crashed' and had to be reset to factory settings. I've tried to re-download i-tunes but nothing seems to be happening. My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

    Hi, Primmy1. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Ipod nano 2nd generation isnt recognized by itunes or windows help!!!

    My iPod nano 2nd generation when i plug it in to the computer it charges but it isnt regocnized by itunes or windows as a disk help!

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • Help with my Ipod Nano 2nd Gen.

    Hi
    Ihave an ipod nano 2nd Generation which works just fine My problem is the Computer on which I have registered my ipod on and  have had my itunes account where I store and sync my ipod on for the last almost 6 years have crashed and I have lost the itune file now I cannot add aor manage my ipod it cannot be synced etc I am worried as to ow tom re instate my ipod to my new computer without losing all my music ...please advise as to how to resolve this problem ..
    Thank You

    Hello there, Shyamalee.
    The following Knowledge Base article has some helpful information for you in regards to your issue:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My iPod nano 2nd edition has died on me. I can press on menu and centre of the wheel and the apple logo comes on for seconds, then I get a glimpse of the menu list then the screen goes dead. What can I do? Can anyone help please?

    MY iPod Nano 2nd generation iPod has died on me. I've charged it both by connecting to my laptop and also separately. I press the centre wheel and menu and the apple logo appears for a few seconds, then I get a glimpse of the menu then it disappears again. I have tried everything even leaving it plugged into the power for about four hours but it made no difference. What can I do?

    Probably not a good sign especially given the age of the device.  Are you able to get it into Disk Mode long enough so that you can restore it in iTunes?
    Putting iPod into Disk Mode
    Otherwise, it might be time to have the iPod serviced or replaced.
    B-rock

  • TS1405 i pod nano 5 generation backlight not working

    Dear Friends,
    my i pod nano 5 generation backlight is not working.Suddenly it stops after recharged.All 5 Rs tried but failed to problem.
    I would highly appriciate for yr. help.
    REGARDS

    If the 5 R's of troubleshooting failed to resolve the issue, then it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
    B-rock

Maybe you are looking for

  • Activation of BEx Web History Failed

    Hello All, I am currently performing the BI-JAVA Portal integration. I am faced with an error while running the report RS_PERS_ACTIVATE. I got this error message: Job started Step 001 started (program RS_PERS_ACTIVATE, variant &0000000000000, user ID

  • Final cut pro make Mac pro kernel panic with RAM from other manufacturers

    hi all if i installed RAM For mac Pro from 667MHz DDR2 fully buffered ECC RAM from other manufacturers final cut pro (just final cut) make the machine kernel panic messege all programs working good (like adobe and other compositing program) but final

  • Satellite A300 - fan starts running every 2 mins for about 30 secs

    Hi I wanted to know if its normal that the fan starts running on my Satellite A300-1hv every 2 mins for about 30 secs? This is happening continuously. I am on vista maximum performance power. Help will be really appreciated. Thanks.

  • Texts are coming in as icloud and not cell

    When a friend receives a text from me, it comes across as (my e-mail) and not my cell #.. how do i change this setting? and the text icon is the green cloud icon correct? there isn't a separate icon for texts from your cell? <E-mail Edited by Host>

  • Printer Job Title

    I am using the Crystal Report version who is integrated with MS Vs2008 Prof. Is  there any way to specify print job name when printing report? I'm failing to find it. In print spooler all jobs from Crystal are appearing as "document" and people can't