I need help!! my ipad air is fully charged but will not power up
okay so I got the ipad air for Christmas I have charged it twice with no problems. This time it will not power up on light or anything do I have to take it in to the Apple store or is there a quick fix for this type of problem.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
Cheers, Tom
Similar Messages
-
my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
Mac book pro fully charged but does not power on
My Mac book pro is fully charged but does not power on.No lights sounds...nothing!
try doing SMC reset, the following article tells how:
http://support.apple.com/kb/HT3964
if it still won't turn on try the following article:
http://support.apple.com/kb/TS1367
if neither of this helps i would take to apple store or apple service provider and have it looked at for possible repair. -
HT201401 my iPhone is fully charged but will not turn on at all ?
my iphone 4 is fully charged but will not turn on ?
Welcome to Apple Communities
Hold Home and Sleep buttons -
How to fix my nano so I can use
If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
My ipod is fully charged but will not work it is telling to visit website support
Not sure what the model name is but it is an IPOD a1136...I had it charging went to turn it on and and an error message with an exclamation and a sad face advising to contact online support but I dont see anything online regarding the problem and how to fix it...Please help!
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
Ipod Touch is fully charged but will not run on battery. Runs plugged in.
When I unplug - it dies. Just upgraded the OS
Hi,
The whole battery may need to be replaced. Take it to your Apple Store and see what they have to say.
xxmitchxx90 -
iPad calling for iCloud backup but will not unlock so i can connect to wifi ... help
thank you for replying:)
but i tried all of the tips in the link and it still didn't work, does anyone else have any ideas?
and just to add another issue, i went under General>About>WiFi Address and there is one and i still cannot access the internet.
Message was edited by: kailey65 -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner. i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?
Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.
-
Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen
I really can't tell from your post but did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Need help mirroring iPad Air in classroom
Not sure in the right community, so excuse me for posting in two areas...
I recently got an iPad Air and the lightning VGA adapter to connect my iPad to the projection system in my classroom. It will project the iPad screen on my computer monitor, but will not project onto the large screen through my projector. I was able to do this with my iPad 2 and the 30 pin VGA adapter, which would mirror onto both the computer screen and the big screen using my VGA splitter box. I use my iPad all the time to show students info from apps. Any ideas?
Thanks! Jen Nicholson, K-5 science lab teacherThank you, Thank you, Thank you... that worked!!! I HAD rebooted the computer, but not the iPad. Once I did that, and rettached ipad to iMac, 'Devices' showed in the right side panel. I think I ticked off the appropriate items and it seemed to back up the iPad onto the iMac. Not sure how long that would take, or if it is finished, so I'm just leaving it plugged in overnight. Tomorrow I will attempt to 'restore' to the new iPad air.
Once again, many thanks for your prompt response. -
My ipod shuffle will connect to itunes on computer but will not fully charge and will not play songs
My Ipod shuffle was washed in a washing machine but dried completely. Now it will connect to my itunes on my computer but will not completely charge or play songs. Can anyone tell me if this is a lost cause and I should buy a new one or is there hope that I can fix this.
Moisture will cause short circuits, so the battery is being affected. The audio output is also affected. You really can't tell if it is completely dry, on the inside. So, it's possible the current condition will improve if it is left alone to dry out for while longer. It is also possible that moisture (and short circuits) caused permanent damage.
Since it is recognized in iTunes, you can try doing a Restore (from the shuffle's Summary or Settings tab).
There is nothing else you can do (actively) to fix it, so if you want to have a usable shuffle now, you'll need to get a new one. You can leave this one alone for a month or so (in a dry well-ventilated location), and try it again. If it works, you'll have a new shuffle and a backup. -
My new ipad just out of the box will not power on. What's the deal?
I just purchased my new ipad2 a few hours ago. Right out of the box it will not power on. Tried to sync in case that would help but it didn't. I can't imagine what the problem would be. At the Apple store they said it should be charged and ready to go.
Thanks but it must be defective because that didn't work. Trying to sync it didn't work nor did trying to charge it. Guess it's another trip to the Applie store tomorrow.
-
I just got a new IPad Air today and the plug that came with it says it will not chrage when it is plugged into my laptop. What do I do?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Maybe you are looking for
-
A few days ago when I used Thunderbird in sending e-mail messages as I would place an attachment it would just stay as an attachment and there was not change to what I had entered in the body of the message. Now when I make an attachment to an e-mail
-
How to load info type 7410 career types to Jobs or Positions
Hello Expert, I'm trying to use T-code PP01 to load career types and career levels (info type 7410 ) by LSMW, But I'm not able to maintain info type 7410 by pp01, I had change the table T77CD to accept maintain infotype from standard transaction,
-
OTL- Timecard: How can associate Project with Time
Hello gurus, I have an OTL requirement where users are required to enter no more than 8 hours of sick time a week. I have an idea on how to accomplish this but I am not sure how to count the hours when Project = Sick. Can somebody give me an idea how
-
Is it possible to change the number or rings on a phone before voicemail starts
Is it possible to reduce the amount of rings a call can do before going to voicemail?
-
Server: s10u7 x86, Java 6 update 16 2 things, actually; The first is that when I try to add my server as a Desktop Provider, it says that the server is not accessible on port 443 (SSL). Apache2 is definitely running, and i get the 'Welcome' message w